+.IP \fBtp_src=\fIport\fB/\fImask\fR
+.IQ \fBtp_dst=\fIport\fB/\fImask\fR
+Bitwise match on TCP (or UDP) source or destination port,
+respectively. The \fIport\fR and \fImask\fR are 16-bit numbers
+written in decimal or in hexadecimal prefixed by \fB0x\fR. Each 1-bit
+in \fImask\fR requires that the corresponding bit in \fIport\fR must
+match. Each 0-bit in \fImask\fR causes the corresponding bit to be
+ignored.
+.IP
+Bitwise matches on transport ports are rarely useful in isolation, but
+a group of them can be used to reduce the number of flows required to
+match on a range of transport ports. For example, suppose that the
+goal is to match TCP source ports 1000 to 1999, inclusive. One way is
+to insert 1000 flows, each of which matches on a single source port.
+Another way is to look at the binary representations of 1000 and 1999,
+as follows:
+.br
+.B "01111101000"
+.br
+.B "11111001111"
+.br
+and then to transform those into a series of bitwise matches that
+accomplish the same results:
+.br
+.B "01111101xxx"
+.br
+.B "0111111xxxx"
+.br
+.B "10xxxxxxxxx"
+.br
+.B "110xxxxxxxx"
+.br
+.B "1110xxxxxxx"
+.br
+.B "11110xxxxxx"
+.br
+.B "1111100xxxx"
+.br
+which become the following when written in the syntax required by
+\fBovs\-ofctl\fR:
+.br
+.B "tcp,tp_src=0x03e8/0xfff8"
+.br
+.B "tcp,tp_src=0x03f0/0xfff0"
+.br
+.B "tcp,tp_src=0x0400/0xfe00"
+.br
+.B "tcp,tp_src=0x0600/0xff00"
+.br
+.B "tcp,tp_src=0x0700/0xff80"
+.br
+.B "tcp,tp_src=0x0780/0xffc0"
+.br
+.B "tcp,tp_src=0x07c0/0xfff0"
+.IP
+Only Open vSwitch 1.6 and later supports bitwise matching on transport
+ports.
+.IP
+Like the exact-match forms of \fBtp_src\fR and \fBtp_dst\fR described
+above, the bitwise match forms apply only when \fBdl_type\fR and
+\fBnw_proto\fR specify TCP or UDP.
+.