ovs-vsctl: Make functions to find entities more flexible.

[openvswitch] / utilities / ovs-ofctl.8.in

diff --git a/utilities/ovs-ofctl.8.in b/utilities/ovs-ofctl.8.in
index 6b39765cb493655c51431eae9550b873f1837477..439d3f5bc3184193ed8eb84ca7e2d34a5ef97fb1 100644 (file)
--- a/utilities/ovs-ofctl.8.in
+++ b/utilities/ovs-ofctl.8.in
@@ -1,4 +1,4 @@
-.TH ovs\-ofctl 8 "March 2009" "Open vSwitch" "Open vSwitch Manual"
+.TH ovs\-ofctl 8 "June 2009" "Open vSwitch" "Open vSwitch Manual"

 .ds PN ovs\-ofctl
 
 .SH NAME
 .ds PN ovs\-ofctl
 
 .SH NAME


@@ -146,7 +146,7 @@ syntax of \fIflows\fR.
 \fBmonitor \fIswitch\fR [\fImiss-len\fR [\fIsend-exp]]
 Connects to \fIswitch\fR and prints to the console all OpenFlow
 messages received.  Usually, \fIswitch\fR should specify a connection
 \fBmonitor \fIswitch\fR [\fImiss-len\fR [\fIsend-exp]]
 Connects to \fIswitch\fR and prints to the console all OpenFlow
 messages received.  Usually, \fIswitch\fR should specify a connection

-named on \fBsecchan\fR(8)'s \fB-l\fR or \fB--listen\fR command line
+named on \fBovs\-openflowd\fR(8)'s \fB-l\fR or \fB--listen\fR command line

 option.
 
 If \fImiss-len\fR is provided, \fBovs\-ofctl\fR sends an OpenFlow ``set
 option.
 
 If \fImiss-len\fR is provided, \fBovs\-ofctl\fR sends an OpenFlow ``set


@@ -223,8 +223,8 @@ Matches physical port \fIport_no\fR.  Switch ports are numbered as
 displayed by \fBovs\-ofctl show\fR.
 
 .IP \fBdl_vlan=\fIvlan\fR
 displayed by \fBovs\-ofctl show\fR.
 
 .IP \fBdl_vlan=\fIvlan\fR

-Matches IEEE 802.1q virtual LAN tag \fIvlan\fR.  Specify \fB0xffff\fR
-as \fIvlan\fR to match packets that are not tagged with a virtual LAN;
+Matches IEEE 802.1q Virtual LAN tag \fIvlan\fR.  Specify \fB0xffff\fR
+as \fIvlan\fR to match packets that are not tagged with a Virtual LAN;

 otherwise, specify a number between 0 and 4095, inclusive, as the
 12-bit VLAN ID to match.
 
 otherwise, specify a number between 0 and 4095, inclusive, as the
 12-bit VLAN ID to match.
 


@@ -326,7 +326,7 @@ omitted, then the entire packet is sent.
 .IP \fBlocal\fR
 Outputs the packet on the ``local port,'' which corresponds to the
 \fBof\fIn\fR network device (see \fBCONTACTING THE CONTROLLER\fR in
 .IP \fBlocal\fR
 Outputs the packet on the ``local port,'' which corresponds to the
 \fBof\fIn\fR network device (see \fBCONTACTING THE CONTROLLER\fR in

-\fBsecchan\fR(8) for information on the \fBof\fIn\fR network device).
+\fBovs\-openflowd\fR(8) for information on the \fBof\fIn\fR network device).

 
 .IP \fBdrop\fR
 Discards the packet, so no further processing or forwarding takes place.
 
 .IP \fBdrop\fR
 Discards the packet, so no further processing or forwarding takes place.


@@ -352,6 +352,18 @@ Sets the source Ethernet address to \fImac\fR.
 
 .IP \fBmod_dl_dst\fB:\fImac\fR
 Sets the destination Ethernet address to \fImac\fR.
 
 .IP \fBmod_dl_dst\fB:\fImac\fR
 Sets the destination Ethernet address to \fImac\fR.

+
+.IP \fBmod_nw_src\fB:\fIip\fR
+Sets the IPv4 source address to \fIip\fR.
+
+.IP \fBmod_nw_dst\fB:\fIip\fR
+Sets the IPv4 destination address to \fIip\fR.
+
+.IP \fBmod_tp_src\fB:\fIport\fR
+Sets the TCP or UDP source port to \fIport\fR.
+
+.IP \fBmod_tp_dst\fB:\fIport\fR
+Sets the TCP or UDP destination port to \fIport\fR.

 .RE
 
 .IP
 .RE
 
 .IP


@@ -470,7 +482,7 @@ The following examples assume that an OpenFlow switch on the local
 host has been configured to listen for management connections on a
 Unix domain socket named \fB@RUNDIR@/openflow.sock\fR, e.g. by
 specifying \fB--listen=punix:@RUNDIR@/openflow.sock\fR on the
 host has been configured to listen for management connections on a
 Unix domain socket named \fB@RUNDIR@/openflow.sock\fR, e.g. by
 specifying \fB--listen=punix:@RUNDIR@/openflow.sock\fR on the

-\fBsecchan\fR(8) command line.
+\fBovs\-openflowd\fR(8) command line.

 
 .TP
 \fBovs\-ofctl dump-tables unix:@RUNDIR@/openflow.sock\fR
 
 .TP
 \fBovs\-ofctl dump-tables unix:@RUNDIR@/openflow.sock\fR