xenserver: use ovs-vsctl for VIF VLANs instead of separate state files
[openvswitch] / utilities / ovs-ofctl.8.in
index eb98043ca46c084062cfe10d76618af1702df628..2e2b38b38cb75ee870ec7bbeb62f438402fd260a 100644 (file)
@@ -26,16 +26,15 @@ connecting to an OpenFlow switch.  The following connection methods
 are supported:
 
 .RS
 are supported:
 
 .RS
-.TP
-\fBssl:\fIhost\fR[\fB:\fIport\fR]
-The specified SSL \fIport\fR (default: 6633) on the given remote
-\fIhost\fR.  The \fB--private-key\fR, \fB--certificate\fR, and
-\fB--ca-cert\fR options are mandatory when this form is used.
+.IP "\fBssl:\fIip\fR[\fB:\fIport\fR]"
+The specified SSL \fIport\fR (default: 6633) on the host at the given
+\fIip\fR, which must be expressed as an IP address (not a DNS name).
+The \fB--private-key\fR, \fB--certificate\fR, and \fB--ca-cert\fR
+options are mandatory when this form is used.
 
 
-.TP
-\fBtcp:\fIhost\fR[\fB:\fIport\fR]
-The specified TCP \fIport\fR (default: 6633) on the given remote
-\fIhost\fR.
+.IP "\fBtcp:\fIip\fR[\fB:\fIport\fR]"
+The specified TCP \fIport\fR (default: 6633) on the host at the given
+\fIip\fR, which must be expressed as an IP address (not a DNS name).
 
 .TP
 \fBunix:\fIfile\fR
 
 .TP
 \fBunix:\fIfile\fR
@@ -147,13 +146,13 @@ syntax of \fIflows\fR.
 \fBmonitor \fIswitch\fR [\fImiss-len\fR [\fIsend-exp]]
 Connects to \fIswitch\fR and prints to the console all OpenFlow
 messages received.  Usually, \fIswitch\fR should specify a connection
 \fBmonitor \fIswitch\fR [\fImiss-len\fR [\fIsend-exp]]
 Connects to \fIswitch\fR and prints to the console all OpenFlow
 messages received.  Usually, \fIswitch\fR should specify a connection
-named on \fBsecchan\fR(8)'s \fB-l\fR or \fB--listen\fR command line
+named on \fBovs\-openflowd\fR(8)'s \fB-l\fR or \fB--listen\fR command line
 option.
 
 If \fImiss-len\fR is provided, \fBovs\-ofctl\fR sends an OpenFlow ``set
 configuration'' message at connection setup time that requests
 \fImiss-len\fR bytes of each packet that misses the flow table.  The
 option.
 
 If \fImiss-len\fR is provided, \fBovs\-ofctl\fR sends an OpenFlow ``set
 configuration'' message at connection setup time that requests
 \fImiss-len\fR bytes of each packet that misses the flow table.  The
-OpenFlow reference implementation not send these messages to the
+OpenFlow reference implementation does not send these messages to the
 \fBovs\-ofctl monitor\fR client connection unless a nonzero value is
 specified on this argument.
 
 \fBovs\-ofctl monitor\fR client connection unless a nonzero value is
 specified on this argument.
 
@@ -327,7 +326,7 @@ omitted, then the entire packet is sent.
 .IP \fBlocal\fR
 Outputs the packet on the ``local port,'' which corresponds to the
 \fBof\fIn\fR network device (see \fBCONTACTING THE CONTROLLER\fR in
 .IP \fBlocal\fR
 Outputs the packet on the ``local port,'' which corresponds to the
 \fBof\fIn\fR network device (see \fBCONTACTING THE CONTROLLER\fR in
-\fBsecchan\fR(8) for information on the \fBof\fIn\fR network device).
+\fBovs\-openflowd\fR(8) for information on the \fBof\fIn\fR network device).
 
 .IP \fBdrop\fR
 Discards the packet, so no further processing or forwarding takes place.
 
 .IP \fBdrop\fR
 Discards the packet, so no further processing or forwarding takes place.
@@ -471,7 +470,7 @@ The following examples assume that an OpenFlow switch on the local
 host has been configured to listen for management connections on a
 Unix domain socket named \fB@RUNDIR@/openflow.sock\fR, e.g. by
 specifying \fB--listen=punix:@RUNDIR@/openflow.sock\fR on the
 host has been configured to listen for management connections on a
 Unix domain socket named \fB@RUNDIR@/openflow.sock\fR, e.g. by
 specifying \fB--listen=punix:@RUNDIR@/openflow.sock\fR on the
-\fBsecchan\fR(8) command line.
+\fBovs\-openflowd\fR(8) command line.
 
 .TP
 \fBovs\-ofctl dump-tables unix:@RUNDIR@/openflow.sock\fR
 
 .TP
 \fBovs\-ofctl dump-tables unix:@RUNDIR@/openflow.sock\fR