Initial implementation of sFlow.

[openvswitch] / utilities / ovs-dpctl.8.in

diff --git a/utilities/ovs-dpctl.8.in b/utilities/ovs-dpctl.8.in
index 652ebb13f42fe8c9e7eab419daf4a2fa19640490..dc4d4568182180fe4adbb2413e306d7e0e96bf39 100644 (file)
--- a/utilities/ovs-dpctl.8.in
+++ b/utilities/ovs-dpctl.8.in
@@ -1,4 +1,4 @@
-.TH ovs\-dpctl 8 "March 2009" "Open vSwitch" "Open vSwitch Manual"
+.TH ovs\-dpctl 8 "August 2009" "Open vSwitch" "Open vSwitch Manual"

 .ds PN ovs\-dpctl
 
 .SH NAME
 .ds PN ovs\-dpctl
 
 .SH NAME


@@ -41,14 +41,13 @@ The following commands manage datapaths.
 
 Creates datapath \fIdp\fR.  The name of the new datapath's local port
 depends on how \fIdp\fR is specified: if it takes the form
 
 Creates datapath \fIdp\fR.  The name of the new datapath's local port
 depends on how \fIdp\fR is specified: if it takes the form

-\fBdp\fIN\fR, the local port will be named \fBdp\fIN\fR; if \fIdp\fR
-is \fBnl:\fI, the local port will be named \fBof\fIN\fR; otherwise,
+\fBdp\fIN\fR, the local port will be named \fBdp\fIN\fR; otherwise,

 the local port's name will be \fIdp\fR.
 
 This will fail if the host already has 256 datapaths, if a network
 device with the same name as the new datapath's local port already
 the local port's name will be \fIdp\fR.
 
 This will fail if the host already has 256 datapaths, if a network
 device with the same name as the new datapath's local port already

-exists, or if \fIdp\fR is given in the form \fBdp\fIN\fR or
-\fBnl:\fIN\fR and a datapath numbered \fIN\fR already exists.
+exists, or if \fIdp\fR is given in the form \fBdp\fIN\fR
+and a datapath numbered \fIN\fR already exists.

 
 If \fInetdev\fRs are specified, \fBovs\-dpctl\fR adds them to the datapath.
 
 
 If \fInetdev\fRs are specified, \fBovs\-dpctl\fR adds them to the datapath.
 


@@ -71,11 +70,6 @@ A \fInetdev\fR may be followed by a comma-separated list of options.
 The following options are currently supported:
 
 .RS
 The following options are currently supported:
 
 .RS

-.IP "\fBport=\fIportno\fR"
-Specifies \fIportno\fR (a number between 1 and 255) as the port number
-at which \fInetdev\fR will be attached.  By default, \fBadd\-if\fR
-automatically selects the lowest available port number.
-

 .IP "\fBinternal\fR"
 Instead of attaching an existing \fInetdev\fR, creates an internal
 port (analogous to the local port) with that name.
 .IP "\fBinternal\fR"
 Instead of attaching an existing \fInetdev\fR, creates an internal
 port (analogous to the local port) with that name.


@@ -86,6 +80,10 @@ port (analogous to the local port) with that name.
 Removes each \fInetdev\fR from the list of network devices datapath
 \fIdp\fR monitors.
 
 Removes each \fInetdev\fR from the list of network devices datapath
 \fIdp\fR monitors.
 

+.TP
+\fBdump-dps\fR
+Prints the name of each configured datapath on a separate line.
+

 .TP
 \fBshow \fR[\fIdp\fR...]
 Prints a summary of configured datapaths, including their datapath
 .TP
 \fBshow \fR[\fIdp\fR...]
 Prints a summary of configured datapaths, including their datapath


@@ -116,9 +114,10 @@ up may be confused about their disappearance.
 .IP "\fBdump-groups \fIdp\fR"
 Prints to the console the sets of port groups maintained by datapath
 \fIdp\fR.  Ordinarily there are at least 2 port groups in a datapath
 .IP "\fBdump-groups \fIdp\fR"
 Prints to the console the sets of port groups maintained by datapath
 \fIdp\fR.  Ordinarily there are at least 2 port groups in a datapath

-that \fBsecchan\fR or \fBvswitch\fR is controlling: group 0 contains
+that \fBovs\-openflowd\fR or \fBovs\-vswitch\fR is controlling: group
+0 contains

 all ports except those disabled by STP, and group 1 contains all
 all ports except those disabled by STP, and group 1 contains all

-ports.  Additional groups might be used in the future.
+ports.  Additional or different groups might be used in the future.

 
 This command is primarily useful for debugging Open vSwitch.  OpenFlow
 does not have a concept of port groups.
 
 This command is primarily useful for debugging Open vSwitch.  OpenFlow
 does not have a concept of port groups.


@@ -147,7 +146,7 @@ Creates datapath number 0.
 Adds two network devices to the new datapath.
 
 .PP
 Adds two network devices to the new datapath.
 
 .PP

-At this point one would ordinarily start \fBsecchan\fR(8) on
+At this point one would ordinarily start \fBovs\-openflowd\fR(8) on

 \fBdp0\fR, transforming \fBdp0\fR into an OpenFlow switch.  Then, when
 the switch and the datapath is no longer needed:
 
 \fBdp0\fR, transforming \fBdp0\fR into an OpenFlow switch.  Then, when
 the switch and the datapath is no longer needed:
 


@@ -161,6 +160,6 @@ Deletes the datapath.
 
 .SH "SEE ALSO"
 
 
 .SH "SEE ALSO"
 

-.BR secchan (8),

 .BR ovs\-appctl (8),
 .BR ovs\-appctl (8),

+.BR ovs\-openflowd (8),

 .BR ovs\-vswitchd (8)
 .BR ovs\-vswitchd (8)