+#. TRANSLATORS: You must keep all ";" - also at the end of line.
+#: doc/org.fsf.pspp.desktop.in:17
+msgid "statistics;analysis;spss;"
+msgstr "Statistik;Analyse;spss;"
+
+#~ msgid "<b>Separators</b>"
+#~ msgstr "<b>Trennzeichen</b>"
+
+#~ msgid "Quote separator characters with"
+#~ msgstr "Texterkennungzeichen"
+
+#~ msgid "<b>Quoting</b>"
+#~ msgstr "<b>Texterkennungszeichen</b>"
+
+#~ msgid "Input format"
+#~ msgstr "Eingabeformat"
+
+#~ msgid "Output format"
+#~ msgstr "Ausgabeformat"
+
+#~ msgid "Unexpected `.' in middle of command"
+#~ msgstr "Unerwarteter Punkt `.' in der Mitte des Befehls."
+
+#~ msgid "No more than %d %s subcommands allowed."
+#~ msgstr "Es sind nicht mehr als %d %s Unterbefehle erlaubt."
+
+#~ msgid "Cannot sample %d observations from a population of %d."
+#~ msgstr "Es ist nicht möglich eine Stichprobe von %d Beobachtungen aus eine Population von %d zu ziehen."
+
+#~ msgid "%s without %s."
+#~ msgstr "%s ohne %s."
+
+#~ msgid "This command must appear inside %s...%s, without intermediate %s...%s."
+#~ msgstr "Dieser Befehl muss innerhalb von %s...%s verwendet werden, ohne Unterbrechung durch %s...%s."
+
+#~ msgid "This command may not follow %s in %s ... %s."
+#~ msgstr "Dieser Befehl kann nicht nach %s innerhalb von %s ... %s verwendet werden."
+
+#~ msgid "Attribute array index must be between 1 and 65535."
+#~ msgstr "Attribut Array Index muss zwischen 1 und 65535 liegen."
+
+#~ msgid "Vectors must have at least one element."
+#~ msgstr "Vektoren müssen mindestens ein Element besitzen."
+
+#~ msgid "Variable display width must be a positive integer."
+#~ msgstr "Anzeigebreite der Variable muß eine positive ganze Zahl sein."
+
+#~ msgid "%s may not be negative. Using default value (%g)."
+#~ msgstr "%s darf nicht negativ sein. Der voreingestellte Wert (%g) wird verwendet."
+
+#~ msgid "Percentiles must lie in the range (0, 100)"
+#~ msgstr "Perzentile müssen im Bereich (0, 100) liegen"
+
+#~ msgid "Histogram frequency must be greater than zero."
+#~ msgstr "Die Angabe zur Häufigkeit (FREQUENCY) für das Histogramm muss größer als Null sein."
+
+#~ msgid "Histogram percentage must be greater than zero."
+#~ msgstr "Die Prozentangabe (PERCENT) für das Histogramm muss größer als Null sein."
+
+#~ msgid "Only types 1, 2 & 3 sums of squares are currently implemented"
+#~ msgstr "Bisher sind nur Quadratsummen vom Typ I, II & III sind implementiert"
+
+#~ msgid "Cut point value must be in the range [0,1]"
+#~ msgstr "Der Trennwert muss im Bereich [0; 1] liegen"
+
+#~ msgid "The number of clusters must be positive"
+#~ msgstr "Anzahl der Cluster muß positiv sein"
+
+#~ msgid "The convergence criterion must be positive"
+#~ msgstr "Das Konvergenzkriterium muss positiv sein"
+
+#~ msgid "The number of iterations must be positive"
+#~ msgstr "Anzahl der Iterationen muß positiv sein"
+
+#~ msgid "Buffer limit must be at least 2."
+#~ msgstr "Puffergrenze muss mindestens 2 betragen."
+
+#~ msgid "The %s value must be non-negative."
+#~ msgstr "Der %s-Wert darf nicht negativ sein."
+
+#~ msgid "The %s subcommand may only be specified once."
+#~ msgstr "Der Unterbefehl %s darf nur ein Mal angegeben werden."
+
+#~ msgid "Record length (%d) must be between 1 and %lu bytes. Assuming %zu-character records."
+#~ msgstr "Die Länge der Einträge (%d) muss zwischen 1 und %lu Bytes liegen. Es wird von Einträgen mit einer Länge von %zu Zeichen ausgegangen."
+
+#~ msgid "Value of %s must be 1 or greater."
+#~ msgstr "Der Wert von %s muss 1 oder mehr betragen."
+
+#~ msgid "The record number specified, %ld, is at or before the previous record, %d. Data fields must be listed in order of increasing record number."
+#~ msgstr "Die angegebene Nummer des Eintrags, %ld, liegt beim oder vor dem vorhergehenden Eintrag, %d. Datenfelder müssen in aufsteigender Reihenfolge aufgelistet werden."
+
+#~ msgid "The record number specified, %ld, exceeds the number of records per case specified on FIXCASE, %d."
+#~ msgstr "Die angegebene Nummer des Eintrags, %ld, übersteigt die Anzahl der Einträge pro Fall, %d, die mit FIXCASE festgelegt wurde."
+
+#~ msgid "The record number specified, %.0f, is at or before the previous record, %d. Data fields must be listed in order of increasing record number."
+#~ msgstr "Die angegebene Nummer des Eintrags, %.0f, liegt beim oder vor dem vorhergehenden Eintrag, %d. Datenfelder müssen in aufsteigender Reihenfolge aufgelistet werden."
+
+#~ msgid "There are %d variable declared but the data has at least %d matrix rows."
+#~ msgstr "Es wurden %d Variablen spezifiziert, in den Daten sind aber mindestens %d Matrix-Zeilen enthalten."
+
+#~ msgid "The N subcommand was specified, but a N record was also found in the data. The N record will be ignored."
+#~ msgstr "Der Unterbefehl N wurde angegeben, aber es wurde auch ein Eintrag für N in den Daten gefunden. Der N-Eintrag wird ignoriert."
+
+#~ msgid "One of the arguments to a DATE function is not an integer. The result will be system-missing."
+#~ msgstr "Eines der Argumente der Funktion DATE ist nicht vom Typ Integer. Das Ergebnis ist system-fehlender Wert."
+
+#~ msgid "The week argument to DATE.WKYR is not an integer. The result will be system-missing."
+#~ msgstr "Das Argument week der Funktion DATE.WKYR ist nicht vom Typ Integer. Das Ergebnis ist system-fehlender Wert."
+
+#~ msgid "The week argument to DATE.WKYR is outside the acceptable range of 1 to 53. The result will be system-missing."
+#~ msgstr "Das Argument week der Funktion DATE.WKYR ist nicht innerhalb des akzeptierten Bereichs von 1 bis 53. Das Ergebnis ist system-fehlender Wert."
+
+#~ msgid "The day argument to DATE.YRDAY is not an integer. The result will be system-missing."
+#~ msgstr "Das Argument day der Funktion DATE.YRDAY ist nicht vom Typ Integer. Das Ergebnis ist system-fehlender Wert."
+
+#~ msgid "The day argument to DATE.YRDAY is outside the acceptable range of 1 to 366. The result will be system-missing."
+#~ msgstr "Das Argument Tag der Funktion DATE.YRDAY ist nicht innerhalb des akzeptierten Bereichs von 1 bis 366. Das Ergebnis ist system-fehlender Wert."
+
+#~ msgid "The year argument to YRMODA is greater than 47516. The result will be system-missing."
+#~ msgstr "Das Argument year in YRMODA ist größer als 47516. Das Ergebnis ist system-fehlender Wert."
+
+#~ msgid "Type mismatch while applying %s operator: cannot convert %s to %s."
+#~ msgstr "Diskrepanz der Typen bei der Anwendung des Operators %s: %s kann nicht zu %s umgewandelt werden."
+
+#~ msgid "%s must have at least %d arguments in list."
+#~ msgstr "%s muss mindestens %d Argumente in der Liste haben."
+
+#~ msgid "%s must have multiple of %d arguments in list."
+#~ msgstr "%s muss ein Vielfachenes von %d Argumenten in der Liste haben."
+
+#~ msgid "%s requires at least %d valid arguments in list."
+#~ msgstr "%s erfordert mindestens %d gültige Argumente in der Liste."
+
+#~ msgid "With %s, using minimum valid argument count of %d does not make sense when passing only %d arguments in list."
+#~ msgstr "Beim der Verwendung von %s ergibt es keinen Sinn die minimale Anzahl von %d Argumenten anzugeben, wenn in der Liste nur %d Argumente übergeben werden. "
+
+#~ msgid "%s: %s"
+#~ msgstr "%s: %s"
+
+#~ msgid "error creating temporary file"
+#~ msgstr "Fehler beim Lesen der temporären Datei"
+
+#~ msgid "HAverage"
+#~ msgstr "HAverage"
+
+#~ msgid "Rounded"
+#~ msgstr "Gerundet"
+
+#~ msgid "Empirical"
+#~ msgstr "Empirisch"
+
+#~ msgid "Empirical with averaging"
+#~ msgstr "Empirisch mit Durchschnittsbildung"
+
+#~ msgid "The defined page is not wide enough to hold at least %d characters in the default font. In fact, there's only room for %d characters."
+#~ msgstr "Das angegebene Seitenformat ist nicht groß genug, um in der Standardschriftart mindestens %d Zeichen darzustellen. Tatsächlich passen nur %d Zeichen auf eine Seite."
+
+#~ msgid "The defined page is not long enough to hold at least %d lines in the default font. In fact, there's only room for %d lines."
+#~ msgstr "Das angegebene Seitenformat ist nicht groß genug um in der Standardschriftart mindestens %d Zeilen darzustellen. Tatsächlich passen nur %d Zeilen auf eine Seite."
+
+#~ msgid "Mean = %.1f"
+#~ msgstr "Mittelwert = %.1f"
+
+#~ msgid "Std. Dev = %.2f"
+#~ msgstr "Std.-Abw. = %.2f"
+
+#~ msgid "Message"
+#~ msgstr "Nachricht"
+
+#~ msgid "%s and %s:"
+#~ msgstr "%s und %s:"
+
+#~ msgid "%s must be between 0 and 20."
+#~ msgstr "%s muss zwischen 0 und 20 liegen."
+
+#~ msgid "%s must be at least 1MB"
+#~ msgstr "%s muss mindestens 1MB sein"
+
+#~ msgid "%s must be positive"
+#~ msgstr "%s muss positiv sein"
+
+#~ msgid "%s is obsolete."
+#~ msgstr "%s ist obsolet"
+
+#~ msgid "Active file compression is not implemented."
+#~ msgstr "Aktive Komprimierung von Dateien ist nicht implementiert."
+
+#~ msgid "%s must be 1500 or later."
+#~ msgstr "%s muss mindestens 1500 oder später sein."
+
+#~ msgid "%s must be at least %d."
+#~ msgstr "%s muss mindestens %d sein."
+
+#~ msgid "Maximum value (%ld) less than minimum value (%ld)."
+#~ msgstr "Maximalwert (%ld) kleiner als Minimalwert (%ld)."
+
+#~ msgid "_Sheet Index: "
+#~ msgstr "_Arbeitsblattnummer"
+
+#~ msgid "pspp"
+#~ msgstr "pspp"
+
+#~ msgid "Could not open file %s during copy operation: %s"
+#~ msgstr "Die Datei %s konnte während einer Copy Operation nicht geöffnet werden: %s."
+
+#~ msgid "Interactive shell not supported on this platform."
+#~ msgstr "Interaktive Komandozeile wird auf dieser Plattform nicht unterstützt."
+
+#~ msgid "Error executing command: %s."
+#~ msgstr "Fehler beim Ausführen des Befehls: %s."
+
+#~ msgid "Sorry. The help system hasn't yet been implemented."
+#~ msgstr "Entschuldigung. Das Hilfesystem wurde noch nicht implementiert."
+
+#~ msgid "Details"
+#~ msgstr "Details"
+
+#~ msgid "Multiple dichotomy set"
+#~ msgstr "Mehrfachantworten-Set für Dichotomien"
+
+#~ msgid "Multiple category set"
+#~ msgstr "Mehrfachantworten-Set für kategoriale Daten"
+
+#~ msgid "Label source"
+#~ msgstr "Quelle der Beschriftungen"
+
+#~ msgid "First variable label among variables"
+#~ msgstr "Erstes Variablenbeschriftung in den Variablen"
+
+#~ msgid "Provided by user"
+#~ msgstr "Vom Benutzer angegeben"
+
+#~ msgid "Category label source"
+#~ msgstr "Quelle der Kategorienbeschreibung"
+
+#~ msgid "Value labels of counted value"
+#~ msgstr "Wertebeschriftungen des gezählten Werts"
+
+#~ msgid "Label:"
+#~ msgstr "Label:"
+
+#~ msgid "No label."
+#~ msgstr "Kein Label."
+
+#~ msgid "Product:"
+#~ msgstr "Produkt:"
+
+#~ msgid "Variables:"
+#~ msgstr "Variablen:"
+
+#~ msgid "Cases:"
+#~ msgstr "Fälle:"
+
+#~ msgid "Type:"
+#~ msgstr "Typ:"
+
+#~ msgid "Description"
+#~ msgstr "Beschreibung"
+
+#~ msgid "File label: %s"
+#~ msgstr "Dateibezeichnung: %s"
+
+#~ msgid "The active dataset dictionary does not contain any documents."
+#~ msgstr "Das Codebuch des aktuellen Datenblatts besitzt keine Dokumente."
+
+#~ msgid "Documents in the active dataset:"
+#~ msgstr "Dokumente im aktuellen Datenblatt:"
+
+#~ msgid "Custom data file attributes."
+#~ msgstr "Benutzerdefinierte Attribute der Datendatei."
+
+#~ msgid "Label: %s\n"
+#~ msgstr "Label: %s\n"
+
+#~ msgid "Format: %s\n"
+#~ msgstr "Format: %s\n"
+
+#~ msgid "Print Format: %s\n"
+#~ msgstr "Druckformat: %s\n"
+
+#~ msgid "Write Format: %s\n"
+#~ msgstr "Schreibformat: %s\n"
+
+#~ msgid "Measure: %s\n"
+#~ msgstr "Skalenniveau: %s\n"
+
+#~ msgid "Role: %s\n"
+#~ msgstr "Rolle: %s\n"
+
+#~ msgid "Display Alignment: %s\n"
+#~ msgstr "Anzeigeausrichtung: %s\n"
+
+#~ msgid "Display Width: %d\n"
+#~ msgstr "Anzeigebreite: %d\n"
+
+#~ msgid "Missing Values: "
+#~ msgstr "Fehlende Werte:"
+
+#~ msgid "Unknown TABLECELLS class"
+#~ msgstr "Unbekannte Klasse von TABLECELLS"
+
+#~ msgid "Exact Sig. (%d-tailed)"
+#~ msgstr "Exakte Sig. (%d-seitig)"
+
+#~ msgid "Valid N"
+#~ msgstr "Gültige N"
+
+#~ msgid "Valid cases = %.*g; cases with missing value(s) = %.*g."
+#~ msgstr "Gültige Fälle = %.*g; Fälle mit fehlenden Werten = %.*g."
+
+#~ msgid "%g"
+#~ msgstr "%g"
+
+#~ msgid "%d"
+#~ msgstr "%d"
+
+#~ msgid "%zu"
+#~ msgstr "%zu"
+
+#~ msgid "50 (Median)"
+#~ msgstr "50 (Median)"
+
+#~ msgid "(%d)"
+#~ msgstr "(%d)"
+
+#~ msgid "Min"
+#~ msgstr "Min"
+
+#~ msgid "Max"
+#~ msgstr "Max"
+
+#~ msgid "%g%%"
+#~ msgstr "%g%%"
+
+#~ msgid "25th"
+#~ msgstr "25tes"
+
+#~ msgid "50th (Median)"
+#~ msgstr "50tes (Median)"
+
+#~ msgid "75th"
+#~ msgstr "75tes"
+
+#~ msgid "(I) %s"
+#~ msgstr "(I) %s"
+
+#~ msgid "(J) %s"
+#~ msgstr "(J) %s"
+
+#~ msgid "(I - J)"
+#~ msgstr "(I - J)"
+
+#~ msgid "%s into %s(%s of %s using %s BY %s)"
+#~ msgstr "%s zu %s(%s von %s mit %s BY %s)"
+
+#~ msgid "%s into %s(%s of %s BY %s)"
+#~ msgstr "%s zu %s(%s von %s BY %s)"
+
+#~ msgid "%s into %s(%s of %s using %s)"
+#~ msgstr "%s zu %s(%s von %s mit %s)"
+
+#~ msgid "%s into %s(%s of %s)"
+#~ msgstr "%s zu %s(%s von %s)"
+
+#~ msgid "Area Under the Curve (%s)"
+#~ msgstr "Fläche unter der Kurve (%s)"
+
+#~ msgid "Coordinates of the Curve (%s)"
+#~ msgstr "Koordinaten der Kurve (%s)"
+
+#~ msgid "Std. Error Mean"
+#~ msgstr "Std.fehler des Mittelwertes"
+
+#~ msgid "(active dataset)"
+#~ msgstr "(aktiver Datensatz)"
+
+#~ msgid "Writing %zu record to %s."
+#~ msgid_plural "Writing %zu records to %s."
+#~ msgstr[0] "%zu Eintrag wird in %s geschrieben."
+#~ msgstr[1] "%zu Einträge werden in %s geschrieben."
+
+#~ msgid "Writing %zu record."
+#~ msgid_plural "Writing %zu records."
+#~ msgstr[0] "%zu Eintrag wird geschrieben."
+#~ msgstr[1] "%zu Einträge werden geschrieben."
+
+#~ msgid "Unsupported compression type (%d)"
+#~ msgstr "Komprimierungstyp (%d) wird nicht unterstützt"
+
+#~ msgid "Failed to seek to end of central directory record: %s"
+#~ msgstr "Fehler bei der Suche nach dem Ende des Hauptverzeichnis-Eintrags: %s"
+
+#~ msgid "Failed to seek to central directory: %s"
+#~ msgstr "Fehler bei der Suche nach dem Hauptverzeichnis: %s"
+
+#~ msgid "Failed to seek to start of member `%s': %s"
+#~ msgstr "Fehler bei der Suche des Anfangs des Elements `%s': %s"
+
+#~ msgid "ascii: closing output file `%s'"
+#~ msgstr "ASCII: die Ausgabedatei `%s' wird geschlossen"
+
+#~ msgid "%s - Page %d"
+#~ msgstr "%s - Seite %d"
+
+#~ msgid "bad vline: x=%d+%d=%d y=(%d+%d=%d,%d+%d=%d) in table size (%d,%d)\n"
+#~ msgstr "falsche Angabe vline: x=%d+%d=%d y=(%d+%d=%d,%d+%d=%d) in der Tabellen der Größe (%d,%d)\n"
+
+#~ msgid "bad hline: x=(%d+%d=%d,%d+%d=%d) y=%d+%d=%d in table size (%d,%d)\n"
+#~ msgstr "falsche Angabe hline: x=(%d+%d=%d,%d+%d=%d) y=%d+%d=%d in der Tabell der Größe (%d,%d)\n"
+
+#~ msgid "bad box: (%d+%d=%d,%d+%d=%d)-(%d+%d=%d,%d+%d=%d) in table size (%d,%d)\n"
+#~ msgstr "falsche Angabe box: (%d+%d=%d,%d+%d=%d)-(%d+%d=%d,%d+%d=%d) in Tabelle der Größe (%d,%d)\n"
+
+#~ msgid "can only convert encrypted data file to sav or sys format"
+#~ msgstr "verschlüsselte Datendateien können nur ins .sav oder .sys Format konvertiert werden"
+
+#~ msgid "can only convert encrypted syntax file to sps format"
+#~ msgstr "nur verschlüsselte Syntaxdateien können nur ins .sps Format konvertiert werden"
+
+#~ msgid "count"
+#~ msgstr "Anzahl"
+
+#~ msgid "expected"
+#~ msgstr "Erwartet"
+
+#~ msgid "residual"
+#~ msgstr "Residual"
+
+#~ msgid "std. resid."
+#~ msgstr "Std. Resid."
+
+#~ msgid "adj. resid."
+#~ msgstr "Korr. Resid."
+
+#~ msgid "Chi-square tests."
+#~ msgstr "Chi-Quadrat Tests."
+
+#~ msgid "Odds Ratio for %s (%.*s / %.*s)"
+#~ msgstr "Quotenverhältnis für %s (%.*s / %.*s)"
+
+#~ msgid "For cohort %s = %.*s"
+#~ msgstr "Für Kohorte %s = %.*s"
+
+#~ msgid "Support for %s files was not compiled into this installation of PSPP"
+#~ msgstr "Unterstützung für %s Dateien ist nicht in dieser PSPP Installation enthalten."
+
+#~ msgid "Cannot parse field content `%.*s' as format %s: %s"
+#~ msgstr "Der Feldinhalt `%.*s' kann nicht als Format %s geparst werden: %s"
+
+#~ msgid "This input line has too few separators to fill in this field."
+#~ msgstr "Diese Datenzeile besitzt zu wenig Trennzeichen um dieses Feld zu füllen."
+
+#~ msgid "An error occurred reading the spreadsheet file."
+#~ msgstr "Beim Schreiben des Tabellendokuments ist ein Fehler aufgetreten."
+
+#~ msgid "Enter a number to add a new variable."
+#~ msgstr "Geben Sie eine Zahl ein, um eine neue Variable hinzuzufügen."
+
+#~ msgid "Enter a number to add a new case."
+#~ msgstr "Geben Sie eine Zahl ein, um einen neuen Fall hinzuzufügen."
+
+#~ msgid "Cannot create variable."
+#~ msgstr "Variable kann nicht erstellt werden."
+
+#~ msgid "\"%s\" is not a valid variable name."
+#~ msgstr "\"%s\" ist kein gültiger Variablenname"
+
+#~ msgid "This dictionary already contains a variable named \"%s\"."
+#~ msgstr "Das Codebuch enthält bereits eine Variable mit dem Namen \"%s\"."
+
+#~ msgid "Cannot rename variable."
+#~ msgstr "Änderung des Variablennamens nicht möglich."
+
+#~ msgid "Enter a variable name to add a new variable."
+#~ msgstr "Geben Sie einen Variablennamen ein, um eine neue Variable hinzuzufügen"
+
+#~ msgid "{%s, %s}\n"
+#~ msgstr "{%s,%s}\n"
+
+#~ msgid "Multiple response set name `%s' does not begin with `$'."
+#~ msgstr "Name des Mehrfachantwort-Sets `%s' beginnt nicht mit `$'."
+
+#~ msgid "could not access definition for terminal `%s'"
+#~ msgstr "Auf die Eigenschaften des Terminals `%s' konnte nicht zugegriffen werden."
+
+#~ msgid ""
+#~ "PSPPIRE, a GUI for PSPP, a program for statistical analysis of sampled data.\n"
+#~ "Usage: %s [OPTION]... FILE\n"
+#~ "\n"
+#~ "Arguments to long options also apply to equivalent short options.\n"
+#~ "\n"
+#~ "GUI options:\n"
+#~ " -q, --no-splash don't show splash screen during startup\n"
+#~ "\n"
+#~ "%sLanguage options:\n"
+#~ " -I, --include=DIR append DIR to search path\n"
+#~ " -I-, --no-include clear search path\n"
+#~ " -a, --algorithm={compatible|enhanced}\n"
+#~ " set to `compatible' if you want output\n"
+#~ " calculated from broken algorithms\n"
+#~ " -x, --syntax={compatible|enhanced}\n"
+#~ " set to `compatible' to disable PSPP extensions\n"
+#~ " -i, --interactive interpret syntax in interactive mode\n"
+#~ " -s, --safer don't allow some unsafe operations\n"
+#~ "Default search path: %s\n"
+#~ "\n"
+#~ "Informative output:\n"
+#~ " -h, --help display this help and exit\n"
+#~ " -V, --version output version information and exit\n"
+#~ "\n"
+#~ "A non-option argument is interpreted as a data file in .sav or .zsav or .por\n"
+#~ "format or a syntax file to load.\n"
+#~ msgstr ""
+#~ "PSPPIRE, eine grafische Oberfläche für PSPP, ein Programm zur statistischen Analyse von Stichprobendaten.\n"
+#~ "Befehl: %s [OPTION]... DATEI\n"
+#~ "\n"
+#~ "Die gezeigten Argumente für die Langform der Optionen finden auch in der entsprechenden Kurzform der Optionen Anwendung.\n"
+#~ "\n"
+#~ "GUI Optionen:\n"
+#~ " -q, --no-splash Begrüßungsbildschirm soll beim Start nicht gezeigt werden\n"
+#~ "\n"
+#~ "%sSprachoptionen:\n"
+#~ " -I, --include=VERZEICHNIS füge das VERZEICHNIS dem Suchpfad hinzu\n"
+#~ " -I-, --no-include Löschung des Suchpfads\n"
+#~ " -a, --algorithm={compatible|enhanced}\n"
+#~ " auf `compatible' setzen, um auch von fehlerhaften\n"
+#~ " Algorithmen Ausgaben erzeugen zu lassen\n"
+#~ " -x, --syntax={compatible|enhanced}\n"
+#~ " auf `compatible' setzen, um PSPP-Erweiterungen auszuschalten\n"
+#~ " -i, --interactive interpretiere die Syntax im interaktiven Modus\n"
+#~ " --syntax-encoding=KODIERUNG legt die Kodierung der Syntaxdatei fest\n"
+#~ " -s, --safer unterbindet unsichere Operationen\n"
+#~ "Voreigestellter Suchpfad: %s\n"
+#~ "\n"
+#~ "Information:\n"
+#~ " -h, --help Anzeige dieses Hilfetextes\n"
+#~ " -V, --version Anzeige der Versionsinformationen\n"
+#~ "\n"
+#~ "Ein Argument ohne Optionen wird als Datendatei im .sav oder .zsav Format interpretiert\n"
+#~ "oder als Syntaxdatei, die ausgeführt wird.\n"
+
+#~ msgid "_Reset"
+#~ msgstr "_Zurücksetzen"
+
+#~ msgid "_Select"
+#~ msgstr "A_swählen"
+
+#~ msgid "Delete the variables at the selected position(s)"
+#~ msgstr "Die ausgewählte(n) Variable(n) löschen"
+
+#~ msgid "Delete the cases at the selected position(s)"
+#~ msgstr "Lösche Fälle in den/der ausgewählten Position(en)"
+
+#~ msgid "_Open..."
+#~ msgstr "Ö_ffnen..."
+
+#~ msgid "Transpose the cases with the variables"
+#~ msgstr "Transponiert die Fälle mit den Variablen"
+
+#~ msgid "Aggregate the case values into a new variable"
+#~ msgstr "Zusammenführung der Werte in einer neuen Variable"
+
+#~ msgid "Choose a subset of cases for analysis"
+#~ msgstr "Wählen Sie einen Teil der Fälle zur Analyse aus"
+
+#~ msgid "All"
+#~ msgstr "Alles"
+
+#~ msgid "expecting number or data string"
+#~ msgstr "erwarte Zahl oder Zeichenkette"
+
+#~ msgid "Number of clusters may not be larger than the number of cases."
+#~ msgstr "Anzahl der Cluster darf nicht größer als die Anzahl der Fälle sein."
+
+#~ msgid "Value of %s must be between 1 and 100."
+#~ msgstr "Der Wert von %s muss zwischen 1 und 100 liegen."
+
+#~ msgid "TreeView path"
+#~ msgstr "TreeView-Pfad"
+
+#~ msgid "The path to the row in the GtkTreeView, as a string"
+#~ msgstr "Der Pfad zu der Zeile im Gtk TreeView als String"
+
+#~ msgid "Diagonal slash"
+#~ msgstr "Diagonaler Strich"
+
+#~ msgid "Whether to draw a diagonal slash across the button."
+#~ msgstr "Ob ein diagonaler Strich über den Button gezeichnet werden soll."
+
+#~ msgid "Incorrect value for variable type"
+#~ msgstr "Ungültiger Wert für Variablentyp"
+
+#~ msgid "Font Selection"
+#~ msgstr "Schriftarten"
+
+#~ msgid "Import Delimited Text Data"
+#~ msgstr "Textdaten importieren"
+
+#~ msgid "(optional case selection condition)"
+#~ msgstr "(optionale Fallauswahlbedingung)"
+
+#~ msgid "Importing Textual Data"
+#~ msgstr "Import von Textdaten"
+
+#~ msgid "Doubled quote mark treated as escape"
+#~ msgstr "Aufeinanderfolgende Texterkennungszeichen als ein Zeichen behandeln"
+
+#~ msgid "Bar charts are not implemented."
+#~ msgstr "Balkendiagramme sind noch nicht implementiert."
+
+#~ msgid "No valid data for variable %s; statistics not displayed."
+#~ msgstr "Keine gültigen Daten für Variable %s; Statistiken werden nicht angezeigt."
+
+#~ msgid "Label: %s"
+#~ msgstr "Label: %s"
+
+#~ msgid "Type: %s\n"
+#~ msgstr "Typ: %s\n"
+
+#~ msgid "Missing Values: %s\n"
+#~ msgstr "Fehlende Werte: %s\n"
+
+#~ msgid "Value Labels:\n"
+#~ msgstr "Wertelabel:\n"
+
+#~ msgid "%s %s\n"
+#~ msgstr "%s %s\n"
+
+#~ msgid "Variables %s specified multiple times on %s subcommand."
+#~ msgstr "Die Variablen %s wurden im Unterbefehl %s mehrfach angegeben."
+
+#~ msgid "Variables %s specified on %s but not on %s."
+#~ msgstr "Die Variablen %s wurden unter %s angegeben, aber nicht unter %s."
+