+"Prozentsatz\n"
+"der Richtigen"
+
+#: src/language/stats/logistic.c:1582
+msgid "Overall Percentage"
+msgstr "Gesamtprozentsatz"
+
+#: src/language/stats/jonckheere-terpstra.c:365
+msgid "Jonckheere-Terpstra Test"
+msgstr "Jonckheere-Terpstra Test"
+
+#: src/language/stats/jonckheere-terpstra.c:379
+#, c-format
+msgid "Number of levels in %s"
+msgstr "Anzahl der Stufen in %s"
+
+#: src/language/stats/jonckheere-terpstra.c:382
+msgid "Observed J-T Statistic"
+msgstr "Beobachtete J-T Statistik"
+
+#: src/language/stats/jonckheere-terpstra.c:383
+msgid "Mean J-T Statistic"
+msgstr "Mittelwert der J-T Statistik"
+
+#: src/language/stats/jonckheere-terpstra.c:384
+msgid "Std. Deviation of J-T Statistic"
+msgstr "Standardabweichung der J-T Statistik"
+
+#: src/language/stats/jonckheere-terpstra.c:385
+msgid "Std. J-T Statistic"
+msgstr "Std. J-T Statistik"
+
+#: src/language/stats/mann-whitney.c:202 src/language/stats/wilcoxon.c:241
+msgid "Sum of Ranks"
+msgstr "Summe der Ränge"
+
+#: src/language/stats/mann-whitney.c:264
+msgid "Mann-Whitney U"
+msgstr "Mann-Whitney U"
+
+#: src/language/stats/mann-whitney.c:265
+msgid "Wilcoxon W"
+msgstr "Wilcoxon W"
+
+#: src/language/stats/mann-whitney.c:266 src/language/stats/runs.c:399
+#: src/language/stats/wilcoxon.c:318
+msgid "Z"
+msgstr "Z"
+
+#: src/language/stats/mann-whitney.c:271 src/language/stats/mcnemar.c:265
+#: src/language/stats/sign.c:134 src/language/stats/wilcoxon.c:323
+msgid "Exact Sig. (2-tailed)"
+msgstr "Exakte Sig. (2-seitig)"
+
+#: src/language/stats/mann-whitney.c:272 src/language/stats/mcnemar.c:271
+#: src/language/stats/sign.c:140 src/language/stats/wilcoxon.c:327
+msgid "Point Probability"
+msgstr "Punktwahrscheinlichkeit"
+
+#: src/language/stats/means.c:412
+msgid "Group Median"
+msgstr "Gruppen Median"
+
+#: src/language/stats/means.c:416
+msgid "Min"
+msgstr "Min"
+
+#: src/language/stats/means.c:417
+msgid "Max"
+msgstr "Max"
+
+#: src/language/stats/means.c:424
+msgid "First"
+msgstr "Erstes"
+
+#: src/language/stats/means.c:425
+msgid "Last"
+msgstr "Letztes"
+
+#: src/language/stats/means.c:427
+msgid "Percent N"
+msgstr "Prozent N"
+
+#: src/language/stats/means.c:428
+msgid "Percent Sum"
+msgstr "Prozent Summe"
+
+#: src/language/stats/means.c:430
+msgid "Harmonic Mean"
+msgstr "Harmonisches Mittel"
+
+#: src/language/stats/means.c:431
+msgid "Geom. Mean"
+msgstr "Geom. Mittel"
+
+#: src/language/stats/means.c:1077
+msgid "Included"
+msgstr "Eingeschlossen"
+
+#: src/language/stats/means.c:1078 src/language/stats/reliability.c:580
+msgid "Excluded"
+msgstr "Ausgeschlossen"
+
+#: src/language/stats/means.c:1120 src/language/stats/means.c:1129
+#: src/language/stats/means.c:1138
+#, c-format
+msgid "%g%%"
+msgstr "%g%%"
+
+#: src/language/stats/means.c:1170
+msgid "Report"
+msgstr "Bericht"
+
+#: src/language/stats/mcnemar.c:143
+msgid "The McNemar test is appropriate only for dichotomous variables"
+msgstr "Der McNemar-Test ist nur für dichotome Variablen geeignet"
+
+#: src/language/stats/mcnemar.c:268 src/language/stats/sign.c:137
+#: src/language/stats/wilcoxon.c:324
+msgid "Exact Sig. (1-tailed)"
+msgstr "Exakte Sig. (1-seitig)"
+
+#: src/language/stats/median.c:359
+msgid "> Median"
+msgstr "> Median"
+
+#: src/language/stats/median.c:362
+msgid "≤ Median"
+msgstr "≤ Median"
+
+#: src/language/stats/npar.c:537
+#, c-format
+msgid "%s subcommand not currently implemented."
+msgstr "%s ist noch nicht implementiert."
+
+#: src/language/stats/npar.c:691
+#, c-format
+msgid "Expecting %s, %s, %s or a number."
+msgstr "Erwarte %s, %s, %s oder eine Zahl."
+
+#: src/language/stats/npar.c:841
+#, c-format
+msgid "The specified value of HI (%d) is lower than the specified value of LO (%d)"
+msgstr "Der angegebene Wert von HI (%d) ist niedriger als der angegebene Wert von LO (%d)"
+
+#: src/language/stats/npar.c:891
+#, c-format
+msgid "%d expected values were given, but the specified range (%d-%d) requires exactly %d values."
+msgstr "%d erwartete Werte wurden angegeben, aber der spezifizierte Bereich (%d-%d) erfordert genau %d Werte."
+
+#: src/language/stats/npar.c:1106 src/language/stats/t-test-parser.c:163
+#, c-format
+msgid "PAIRED was specified but the number of variables preceding WITH (%zu) did not match the number following (%zu)."
+msgstr "PAIRED wurde angegeben, aber die Anzahl der vorhergehenden Variablen (%zu) stimmt nicht mit der Anzahl der nachfolgenden Variablen (%zu) überein."
+
+#: src/language/stats/npar-summary.c:146
+msgid "25th"
+msgstr "25tes"
+
+#: src/language/stats/npar-summary.c:149
+msgid "50th (Median)"
+msgstr "50tes (Median)"
+
+#: src/language/stats/npar-summary.c:152
+msgid "75th"
+msgstr "75tes"
+
+#: src/language/stats/oneway.c:360
+msgid "LSD"
+msgstr "LSD"
+
+#: src/language/stats/oneway.c:361
+msgid "Tukey HSD"
+msgstr "Tukey HSD"
+
+#: src/language/stats/oneway.c:362
+msgid "Bonferroni"
+msgstr "Bonferroni"
+
+#: src/language/stats/oneway.c:363
+msgid "Scheffé"
+msgstr "Scheffé"
+
+#: src/language/stats/oneway.c:364
+msgid "Games-Howell"
+msgstr "Games-Howell"
+
+#: src/language/stats/oneway.c:365
+msgid "Šidák"
+msgstr "Šidák"
+
+#: src/language/stats/oneway.c:513
+#, c-format
+msgid "The post hoc analysis method %s is not supported."
+msgstr "Die Post-Hoc-Analysemethode %s wird nicht unterstützt."
+
+#: src/language/stats/oneway.c:828
+#, c-format
+msgid "Dependent variable %s has no non-missing values. No analysis for this variable will be done."
+msgstr "Die abhängige Variable %s hat keine nicht-fehlenden Werte. Es wird keine Analyse für diese Variable durchgeführt."
+
+#: src/language/stats/oneway.c:910
+#, c-format
+msgid "In contrast list %zu, the number of coefficients (%zu) does not equal the number of groups (%d). This contrast list will be ignored."
+msgstr "In der Liste der Kontraste %zu stimmt die Anzahl der Koeffizienten (%zu) nicht mit der Anzahl der Gruppen (%d) überein. Dieser Kontrast wird nicht berechnet."
+
+#: src/language/stats/oneway.c:922
+#, c-format
+msgid "Coefficients for contrast %zu do not total zero"
+msgstr "Die Koeffizienten für den Kontrast %zu addieren sich nicht zu Null auf."
+
+#: src/language/stats/oneway.c:975 src/language/stats/regression.c:938
+msgid "Sum of Squares"
+msgstr "Quadratsumme"
+
+#: src/language/stats/oneway.c:997
+msgid "Between Groups"
+msgstr "Zwischen Gruppen"
+
+#: src/language/stats/oneway.c:998
+msgid "Within Groups"
+msgstr "Innerhalb Gruppen"
+
+#: src/language/stats/oneway.c:1031
+msgid "ANOVA"
+msgstr "ANOVA"
+
+#: src/language/stats/oneway.c:1224
+msgid "Levene Statistic"
+msgstr "Levene Statistik"
+
+#: src/language/stats/oneway.c:1225
+msgid "df1"
+msgstr "df1"
+
+#: src/language/stats/oneway.c:1226
+msgid "df2"
+msgstr "df2"
+
+#: src/language/stats/oneway.c:1229
+msgid "Test of Homogeneity of Variances"
+msgstr "Test der Homogenität der Varianzen"
+
+#: src/language/stats/oneway.c:1302
+msgid "Contrast Coefficients"
+msgstr "Kontrast Koeffizienten"
+
+#: src/language/stats/oneway.c:1304 src/language/stats/oneway.c:1379
+msgid "Contrast"
+msgstr "Kontrast"
+
+#: src/language/stats/oneway.c:1377
+msgid "Contrast Tests"
+msgstr "Kontrast Tests"
+
+#: src/language/stats/oneway.c:1380
+msgid "Value of Contrast"
+msgstr "Kontrastwert"
+
+#: src/language/stats/oneway.c:1382 src/language/stats/regression.c:832
+#: src/language/stats/t-test-indep.c:292
+#: src/language/stats/t-test-one-sample.c:95
+#: src/language/stats/t-test-paired.c:305
+msgid "t"
+msgstr "t"
+
+#: src/language/stats/oneway.c:1434
+msgid "Assume equal variances"
+msgstr "Nehme gleiche Varianzen an"
+
+#: src/language/stats/oneway.c:1438
+msgid "Does not assume equal"
+msgstr "Nehme nicht gleiche Varianzen an"
+
+#: src/language/stats/oneway.c:1584
+#, c-format
+msgid "Multiple Comparisons (%s)"
+msgstr "Mehrfachvergleiche (%s)"
+
+#: src/language/stats/oneway.c:1586
+#, c-format
+msgid "(I) %s"
+msgstr "(I) %s"
+
+#: src/language/stats/oneway.c:1587
+#, c-format
+msgid "(J) %s"
+msgstr "(J) %s"
+
+#: src/language/stats/oneway.c:1588 src/language/stats/t-test-indep.c:295
+#: src/language/stats/t-test-one-sample.c:98
+msgid "Mean Difference"
+msgstr "Mittlere Differenz"
+
+#: src/language/stats/oneway.c:1589
+msgid "(I - J)"
+msgstr "(I - J)"
+
+#: src/language/stats/oneway.c:1594
+#, c-format
+msgid "%g%% Confidence Interval"
+msgstr "%g%% Konfidenzintervall"
+
+#: src/language/stats/quick-cluster.c:361
+msgid "Number of clusters may not be larger than the number of cases."
+msgstr "Anzahl der Cluster darf nicht größer als die Anzahl der Fälle sein."
+
+#: src/language/stats/quick-cluster.c:402
+msgid "Final Cluster Centers"
+msgstr "Clusterzentren der Ausgangsklassifikation"
+
+#: src/language/stats/quick-cluster.c:406
+msgid "Initial Cluster Centers"
+msgstr "Anfängliche Clusterzentren"
+
+#: src/language/stats/quick-cluster.c:409
+#: src/language/stats/quick-cluster.c:463
+msgid "Cluster"
+msgstr "Cluster"
+
+#: src/language/stats/quick-cluster.c:461
+msgid "Number of Cases in each Cluster"
+msgstr "Anzahl der Fälle in jedem Cluster"
+
+#: src/language/stats/quick-cluster.c:553
+msgid "The number of clusters must be positive"
+msgstr "Anzahl der Cluster muß positiv sein"
+
+#: src/language/stats/quick-cluster.c:568
+msgid "The number of iterations must be positive"
+msgstr "Anzahl der Iterationen muß positiv sein"
+
+#: src/language/stats/rank.c:206
+#, c-format
+msgid "Cannot generate variable name for ranking %s with %s. All candidates in use."
+msgstr "Ein Variablenname für die Rangbildung von %s mit %s konnte nicht erzeugt werden. Alle Kandidaten werden bereits verwedet."
+
+#: src/language/stats/rank.c:321
+#, c-format
+msgid "Too many variables in %s clause."
+msgstr "Zu viele Variablen im Block %s."
+
+#: src/language/stats/rank.c:323
+#, c-format
+msgid "Variable %s already exists."
+msgstr "Variable %s existiert bereits."
+
+#: src/language/stats/rank.c:325 src/language/expressions/evaluate.c:164
+#, c-format
+msgid "Duplicate variable name %s."
+msgstr "Doppelter Variablenname %s."
+
+#: src/language/stats/rank.c:631
+#, c-format
+msgid "%s of %s by %s"
+msgstr "%s von %s durch %s"
+
+#: src/language/stats/rank.c:636
+#, c-format
+msgid "%s of %s"
+msgstr "%s von %s"
+
+#: src/language/stats/rank.c:823
+#, c-format
+msgid "Variables Created By %s"
+msgstr "Variablen wurden von %s erstellt"
+
+#: src/language/stats/rank.c:847
+#, c-format
+msgid "%s into %s(%s of %s using %s BY %s)"
+msgstr "%s zu %s(%s von %s mit %s BY %s)"
+
+#: src/language/stats/rank.c:857
+#, c-format
+msgid "%s into %s(%s of %s BY %s)"
+msgstr "%s zu %s(%s von %s BY %s)"
+
+#: src/language/stats/rank.c:870
+#, c-format
+msgid "%s into %s(%s of %s using %s)"
+msgstr "%s zu %s(%s von %s mit %s)"
+
+#: src/language/stats/rank.c:879
+#, c-format
+msgid "%s into %s(%s of %s)"
+msgstr "%s zu %s(%s von %s)"
+
+#: src/language/stats/reliability.c:164
+msgid "Reliability on a single variable is not useful."
+msgstr "Reliabilität einer einzelnen Variable ist nicht sinnvoll."
+
+#: src/language/stats/reliability.c:280
+msgid "The STATISTICS subcommand is not yet implemented. No statistics will be produced."
+msgstr "Der Unterbefehl STATISTICS ist noch nicht implementiert. Es wird keine Statistik erstellt."
+
+#: src/language/stats/reliability.c:299
+msgid "The split point must be less than the number of variables"
+msgstr "Der Trennwert muß kleiner als die Anzahl von Variablen sein"
+
+#: src/language/stats/reliability.c:524
+#, c-format
+msgid "Scale: %s"
+msgstr "Skala: %s"
+
+#: src/language/stats/reliability.c:588 src/ui/gui/logistic.ui:289
+msgid "%"
+msgstr "%"
+
+#: src/language/stats/reliability.c:635
+msgid "Item-Total Statistics"
+msgstr "Item-Gesamt Statistiken"
+
+#: src/language/stats/reliability.c:657
+msgid "Scale Mean if Item Deleted"
+msgstr "Skalenmittelwert wenn Item gelöscht"
+
+#: src/language/stats/reliability.c:660
+msgid "Scale Variance if Item Deleted"
+msgstr "Skalenvarianz wenn Item gelöscht"
+
+#: src/language/stats/reliability.c:663
+msgid "Corrected Item-Total Correlation"
+msgstr "Korrigierte Item-Gesamt-Korrelation"
+
+#: src/language/stats/reliability.c:666
+msgid "Cronbach's Alpha if Item Deleted"
+msgstr "Cronbachs Alpha wenn Item gelöscht"
+
+#: src/language/stats/reliability.c:743
+msgid "Reliability Statistics"
+msgstr "Reliabilitätsstatistiken"
+
+#: src/language/stats/reliability.c:780 src/language/stats/reliability.c:796
+msgid "Cronbach's Alpha"
+msgstr "Cronbach's Alpha"
+
+#: src/language/stats/reliability.c:783 src/language/stats/reliability.c:805
+#: src/language/stats/reliability.c:814
+msgid "N of Items"
+msgstr "N der Items"
+
+#: src/language/stats/reliability.c:799
+msgid "Part 1"
+msgstr "Teil 1"
+
+#: src/language/stats/reliability.c:808
+msgid "Part 2"
+msgstr "Teil 2"
+
+#: src/language/stats/reliability.c:817
+msgid "Total N of Items"
+msgstr "Gesamt N der Items"
+
+#: src/language/stats/reliability.c:820
+msgid "Correlation Between Forms"
+msgstr "Korrelation zwischen Formen"
+
+#: src/language/stats/reliability.c:823
+msgid "Spearman-Brown Coefficient"
+msgstr "Spearman-Brown Koeffizient"
+
+#: src/language/stats/reliability.c:826
+msgid "Equal Length"
+msgstr "Gleiche Länge"
+
+#: src/language/stats/reliability.c:829
+msgid "Unequal Length"
+msgstr "Ungleiche Länge"
+
+#: src/language/stats/reliability.c:833
+msgid "Guttman Split-Half Coefficient"
+msgstr "Guttman Split-Half-Koeffizient"
+
+#: src/language/stats/roc.c:958
+msgid "Area Under the Curve"
+msgstr "Fläche unter der Kurve"
+
+#: src/language/stats/roc.c:960
+#, c-format
+msgid "Area Under the Curve (%s)"
+msgstr "Fläche unter der Kurve (%s)"
+
+#: src/language/stats/roc.c:965
+msgid "Area"
+msgstr "Fläche"
+
+#: src/language/stats/roc.c:979
+msgid "Asymptotic Sig."
+msgstr "Asymptotisch Sig."
+
+#: src/language/stats/roc.c:986
+#, c-format
+msgid "Asymp. %g%% Confidence Interval"
+msgstr "Asymp. %g%% Konfidenzintervall"
+
+#: src/language/stats/roc.c:992
+msgid "Variable under test"
+msgstr "Getestete Variable"
+
+#: src/language/stats/roc.c:1051
+msgid "Case Summary"
+msgstr "Fallzusammenfassung"
+
+#: src/language/stats/roc.c:1071
+msgid "Unweighted"
+msgstr "ungewichtet"
+
+#: src/language/stats/roc.c:1072
+msgid "Weighted"
+msgstr "gewichtet"
+
+#: src/language/stats/roc.c:1076
+msgid "Valid N (listwise)"
+msgstr "Gültige N (listenweise)"
+
+#: src/language/stats/roc.c:1108
+msgid "Coordinates of the Curve"
+msgstr "Koordinaten der Kurve"
+
+#: src/language/stats/roc.c:1110
+#, c-format
+msgid "Coordinates of the Curve (%s)"
+msgstr "Koordinaten der Kurve (%s)"
+
+#: src/language/stats/roc.c:1118
+msgid "Test variable"
+msgstr "Testvariable"
+
+#: src/language/stats/roc.c:1120
+msgid "Positive if greater than or equal to"
+msgstr "Positiv falls größer oder gleich"
+
+#: src/language/stats/roc.c:1121 src/output/charts/roc-chart-cairo.c:38
+msgid "Sensitivity"
+msgstr "Sensitivität"
+
+#: src/language/stats/roc.c:1122 src/output/charts/roc-chart-cairo.c:37
+msgid "1 - Specificity"
+msgstr "1- Spezifität"
+
+#: src/language/stats/regression.c:372
+msgid "REGRESSION with SAVE ignores TEMPORARY. Temporary transformations will be made permanent."
+msgstr "REGRESSION mit SAVE ignoriert TEMPORARY. Temporäre Umformungen werden dauerhaft gemacht."
+
+#: src/language/stats/regression.c:507
+msgid "The dependent variable is equal to the independent variable. The least squares line is therefore Y=X. Standard errors and related statistics may be meaningless."
+msgstr "Die abhängige Variable ist mit der unabhängigen Variable identisch. Die Regressionsgerade ist daher Y=X. Standardfehler und damit verbundene Statistiken sind eventuell aussagelos."
+
+#: src/language/stats/regression.c:691
+msgid "No valid data found. This command was skipped."
+msgstr "Keine gültigen Daten gefunden. Dieser Befehl wird übersprungen."
+
+#: src/language/stats/regression.c:776
+#: src/ui/gui/psppire-dialog-action-regression.c:42
+msgid "R"
+msgstr "R"
+
+#: src/language/stats/regression.c:777
+msgid "R Square"
+msgstr "R-Quadrat"
+
+#: src/language/stats/regression.c:778
+msgid "Adjusted R Square"
+msgstr "Korrigiertes R-Quadrat"
+
+#: src/language/stats/regression.c:779
+msgid "Std. Error of the Estimate"
+msgstr "Standardfehler des Schätzers "
+
+#: src/language/stats/regression.c:784
+#, c-format
+msgid "Model Summary (%s)"
+msgstr "Modellzusammenfassung (%s)"
+
+#: src/language/stats/regression.c:827
+msgid "Unstandardized Coefficients"
+msgstr "Unstandardisierte Koeffizienten"
+
+#: src/language/stats/regression.c:830
+msgid "Standardized Coefficients"
+msgstr "Standardisierte Koeffizienten"
+
+#: src/language/stats/regression.c:831
+msgid "Beta"
+msgstr "Beta"
+
+#: src/language/stats/regression.c:834
+msgid "(Constant)"
+msgstr "(Konstante)"
+
+#: src/language/stats/regression.c:845
+#, c-format
+msgid "%g%% Confidence Interval for B"
+msgstr "%g%% Konfidenzintervall für B"
+
+#: src/language/stats/regression.c:909
+#, c-format
+msgid "Coefficients (%s)"
+msgstr "Koeffizienten (%s)"
+
+#: src/language/stats/regression.c:944 src/ui/gui/regression.ui:7
+msgid "Regression"
+msgstr "Regression"
+
+#: src/language/stats/regression.c:967
+#, c-format
+msgid "ANOVA (%s)"
+msgstr "ANOVA (%s)"
+
+#: src/language/stats/regression.c:994
+msgid "Covariances"
+msgstr "Kovarianzen"
+
+#: src/language/stats/regression.c:1009
+#, c-format
+msgid "Coefficient Correlations (%s)"
+msgstr "Korrelationen der Koeffizienten (%s)"
+
+#: src/language/stats/runs.c:168
+#, c-format
+msgid "Multiple modes exist for variable `%s'. Using %.*g as the threshold value."
+msgstr "Für die Variable `%s' gibt es mehrere Modalwerte. %.*g wird als Grenzwert verwendet."
+
+#: src/language/stats/runs.c:325 src/ui/gui/runs.ui:7
+msgid "Runs Test"
+msgstr "Sequenzen-Test"
+
+#: src/language/stats/runs.c:370
+msgid "Test Value"
+msgstr "Testwert"
+
+#: src/language/stats/runs.c:374
+msgid "Test Value (mode)"
+msgstr "Testwert (Modus)"
+
+#: src/language/stats/runs.c:378
+msgid "Test Value (mean)"
+msgstr "Testwert (arith. Mittelwert)"
+
+#: src/language/stats/runs.c:382
+msgid "Test Value (median)"
+msgstr "Testwert (Median)"
+
+#: src/language/stats/runs.c:387
+msgid "Cases < Test Value"
+msgstr "Fälle < Testwert"
+
+#: src/language/stats/runs.c:390
+msgid "Cases ≥ Test Value"
+msgstr "Fälle ≥ Testwert"
+
+#: src/language/stats/runs.c:393
+msgid "Total Cases"
+msgstr "Gesamte Fälle"
+
+#: src/language/stats/runs.c:396
+msgid "Number of Runs"
+msgstr "Anzahl der Sequenzen"
+
+#: src/language/stats/sign.c:93
+msgid "Negative Differences"
+msgstr "Negative Differenzen"
+
+#: src/language/stats/sign.c:94
+msgid "Positive Differences"
+msgstr "Positive Differenzen"
+
+#: src/language/stats/sign.c:95 src/language/stats/wilcoxon.c:255
+msgid "Ties"
+msgstr "Rangbindungen"
+
+#: src/language/stats/sort-cases.c:64
+msgid "Buffer limit must be at least 2."
+msgstr "Puffergrenze muss mindestens 2 betragen."
+
+#: src/language/stats/sort-criteria.c:89
+#, c-format
+msgid "Variable %s specified twice in sort criteria."
+msgstr "Variable %s ist in den Sortierkriterien zweimal angegeben."
+
+#: src/language/stats/t-test-indep.c:209
+msgid "Group Statistics"
+msgstr "Gruppenstatistiken"
+
+#: src/language/stats/t-test-indep.c:279
+msgid "Independent Samples Test"
+msgstr "Test bei unabhängigen Stichproben"
+
+#: src/language/stats/t-test-indep.c:287
+msgid "Levene's Test for Equality of Variances"
+msgstr "Levene-Test der Varianzgleichheit"
+
+#: src/language/stats/t-test-indep.c:288
+msgid "t-test for Equality of Means"
+msgstr "T-Test für die Mittelwertgleichheit"
+
+#: src/language/stats/t-test-indep.c:296
+msgid "Std. Error Difference"
+msgstr "Stdfehler der Differenz"
+
+#: src/language/stats/t-test-indep.c:301
+#: src/language/stats/t-test-one-sample.c:90
+#: src/language/stats/t-test-paired.c:300
+#, c-format
+msgid "%g%% Confidence Interval of the Difference"
+msgstr "%g%% Konfidenzintervall der Differenz"
+
+#: src/language/stats/t-test-indep.c:317
+msgid "Equal variances assumed"
+msgstr "Varianzen sind gleich"
+
+#: src/language/stats/t-test-indep.c:349
+msgid "Equal variances not assumed"
+msgstr "Varianzen sind nicht gleich"
+
+#: src/language/stats/t-test-one-sample.c:80
+msgid "One-Sample Test"
+msgstr "Test bei einer Sichprobe"
+
+#: src/language/stats/t-test-one-sample.c:85
+#, c-format
+msgid "Test Value = %f"
+msgstr "Testwert = %f"
+
+#: src/language/stats/t-test-one-sample.c:157
+msgid "One-Sample Statistics"
+msgstr "Statistik bei einer Stichprobe"
+
+#: src/language/stats/t-test-paired.c:177
+msgid "Paired Sample Statistics"
+msgstr "Statistik bei gepaarten Stichproben"
+
+#: src/language/stats/t-test-paired.c:189
+#: src/language/stats/t-test-paired.c:244
+#: src/language/stats/t-test-paired.c:327
+#, c-format
+msgid "Pair %d"
+msgstr "Paar %d"
+
+#: src/language/stats/t-test-paired.c:231
+msgid "Paired Samples Correlations"
+msgstr "Korrelationen bei gepaarten Stichproben"
+
+#: src/language/stats/t-test-paired.c:234
+msgid "Correlation"
+msgstr "Korrelation"
+
+#: src/language/stats/t-test-paired.c:246
+#, c-format
+msgid "%s & %s"
+msgstr "%s & %s"
+
+#: src/language/stats/t-test-paired.c:290
+msgid "Paired Samples Test"
+msgstr "Test bei gepaarten Stichproben"
+
+#: src/language/stats/t-test-paired.c:297
+msgid "Paired Differences"
+msgstr "Gepaarte Differenzen"
+
+#: src/language/stats/t-test-paired.c:308
+msgid "Std. Error Mean"
+msgstr "Std.fehler des Mittelwertes"
+
+#: src/language/stats/t-test-paired.c:329
+#, c-format
+msgid "%s - %s"
+msgstr "%s - %s"
+
+#: src/language/stats/t-test-parser.c:123
+#, c-format
+msgid "When applying %s to a string variable, two values must be specified."
+msgstr "Bei der Anwendung von %s auf eine Zeichenfolge müssen zwei Werte übergeben werden."
+
+#: src/language/stats/t-test-parser.c:135
+#: src/language/stats/t-test-parser.c:231
+#, c-format
+msgid "%s subcommand may not be used with %s."
+msgstr "%s Unterbefehl kann nicht mit %s verwendet werden."
+
+#: src/language/stats/t-test-parser.c:293
+msgid "Exactly one of TESTVAL, GROUPS and PAIRS subcommands must be specified."
+msgstr "Genau einer der drei Unterbefehle TESTVAL, GROUPS oder PAIRS muss angegeben werden."
+
+#: src/language/stats/wilcoxon.c:253
+msgid "Negative Ranks"
+msgstr "Negative Ränge"
+
+#: src/language/stats/wilcoxon.c:254
+msgid "Positive Ranks"
+msgstr "Positive Ränge"
+
+#: src/language/stats/wilcoxon.c:362
+msgid "Too many pairs to calculate exact significance."
+msgstr "Zu viele Paarungen um die exakte Sigifikanz zu berechnen."
+
+#: src/language/data-io/combine-files.c:214
+msgid "Cannot specify the active dataset since none has been defined."
+msgstr "Das aktive Datenblatt kann nicht angegeben werden, da noch keines definiert wurde."
+
+#: src/language/data-io/combine-files.c:220
+msgid "This command may not be used after TEMPORARY when the active dataset is an input source. Temporary transformations will be made permanent."
+msgstr "Dieser Befehl darf nicht nach TEMPORARY verwendet werden, wenn das aktive Datenblatt eine Quelle ist. Vorläufige Transformationen werden dauerhaft gemacht."
+
+#: src/language/data-io/combine-files.c:255
+msgid "Multiple IN subcommands for a single FILE or TABLE."
+msgstr "Mehrere IN Unterbefehle für eine einzelne Datei (FILE) oder Tabelle (TABLE)."
+
+#: src/language/data-io/combine-files.c:308
+#, c-format
+msgid "File %s lacks BY variable %s."
+msgstr "In der Datei %s fehlt BY Variable %s."
+
+#: src/language/data-io/combine-files.c:311
+#, c-format
+msgid "Active dataset lacks BY variable %s."
+msgstr "Im aktiven Datenblatt fehlt BY Variable %s."
+
+#: src/language/data-io/combine-files.c:388
+#: src/language/data-io/combine-files.c:393
+#, c-format
+msgid "BY is required when %s is specified."
+msgstr "BY muss angegeben werden, wenn %s angegeben wurde."
+
+#: src/language/data-io/combine-files.c:521
+msgid "Combining files with incompatible encodings. String data may not be represented correctly."
+msgstr "Zusammenführung von Dateien mit nicht kompatiblen Kodierungen. Zeichenfolgen werden möglicherweise nicht korrekt wiedergegeben."
+
+#: src/language/data-io/combine-files.c:564
+#, c-format
+msgid "Variable %s in file %s has different type or width from the same variable in earlier file."
+msgstr "Die Variable %s in der Datei %s hat einen anderen Typ oder eine andere Breite als die gleiche Variable in einer vorherigen Datei."
+
+#: src/language/data-io/combine-files.c:570
+#, c-format
+msgid "In file %s, %s is numeric."
+msgstr "In der Datei %s ist %s numerisch."
+
+#: src/language/data-io/combine-files.c:573
+#, c-format
+msgid "In file %s, %s is a string variable with width %d."
+msgstr "In der Datei %s ist %s eine Stringvariable mit der Breite %d."
+
+#: src/language/data-io/combine-files.c:578
+#, c-format
+msgid "In an earlier file, %s was numeric."
+msgstr "In einer vorherigen Datei war %s numerisch."
+
+#: src/language/data-io/combine-files.c:581
+#, c-format
+msgid "In an earlier file, %s was a string variable with width %d."
+msgstr "In einer vorherigen Datei war %s eine Stringvariable mit der Breite %d."
+
+#: src/language/data-io/combine-files.c:621
+#, c-format
+msgid "Variable name %s specified on %s subcommand duplicates an existing variable name."
+msgstr "Der Variablenname %s, der im Unterbefehl %s angegeben wurde, ist ein Duplikat eines existierenden Variablennamens."
+
+#: src/language/data-io/combine-files.c:793
+#, c-format
+msgid "Encountered %zu sets of duplicate cases in the master file."
+msgstr "Es wurden %zu Paare von doppelten Fällen in der Masterdatei gefunden."
+
+#: src/language/data-io/data-list.c:141
+#, c-format
+msgid "The %s subcommand may only be used within %s."
+msgstr "Der Unterbefehl %s darf nur innerhalb von %s verwendet werden."
+
+#: src/language/data-io/data-list.c:146
+#, c-format
+msgid "The %s subcommand may only be specified once."
+msgstr "Der Unterbefehl %s darf nur ein Mal angegeben werden."
+
+#: src/language/data-io/data-list.c:184
+msgid "Only one of FIXED, FREE, or LIST may be specified."
+msgstr "Es darf nur entweder FIXED, FREE oder LIST angegeben werden, aber nicht mehrere Optionen."
+
+#: src/language/data-io/data-list.c:245
+msgid "Encoding should not be specified for inline data. It will be ignored."
+msgstr "Kodierung sollte bei Inline-Daten nicht angegeben werden. Diese wird übersprungen."
+
+#: src/language/data-io/data-list.c:254
+#, c-format
+msgid "The %s subcommand may be used only with %s."
+msgstr "Der Unterbefehl %s darf nur mit %s verwendet werden."
+
+#: src/language/data-io/data-list.c:269
+msgid "At least one variable must be specified."
+msgstr "Es muss mindestens eine Variable angegeben werden."
+
+#: src/language/data-io/data-list.c:368 src/language/data-io/data-list.c:476
+#: src/language/data-io/get-data.c:666
+#, c-format
+msgid "%s is a duplicate variable name."
+msgstr "Der Variablenname %s kommt doppelt vor."
+
+#: src/language/data-io/data-list.c:375
+#, c-format
+msgid "There is already a variable %s of a different type."
+msgstr "Es gibt bereits eine Variable %s mit einem anderen Typ."
+
+#: src/language/data-io/data-list.c:382
+#, c-format
+msgid "There is already a string variable %s of a different width."
+msgstr "Es gibt bereits eine Stringvariable %s mit einer anderen Breite."
+
+#: src/language/data-io/data-list.c:390
+#, c-format
+msgid "Cannot place variable %s on record %d when RECORDS=%d is specified."
+msgstr "Die Variable %s kann nicht im EIntrag %d platziert werden, wenn RECORDS=%d angegeben wurde."
+
+#: src/language/data-io/data-parser.c:461
+#: src/language/data-io/data-parser.c:470
+msgid "Quoted string extends beyond end of line."
+msgstr "Eine Zeichenfolge in Anführungszeichen erstreckt sich über das Zeilenende hinaus."
+
+#: src/language/data-io/data-parser.c:496
+msgid "Missing delimiter following quoted string."
+msgstr "Fehlendes Trennzeichen nach einer Zeichenfolge in Anführungszeichen."
+
+#: src/language/data-io/data-parser.c:515
+#, c-format
+msgid "Data for variable %s is not valid as format %s: %s"
+msgstr "Die Daten für die Variable %s sind im Format %s ungültig: %s"
+
+#: src/language/data-io/data-parser.c:544
+#, c-format
+msgid "Partial case of %d of %d records discarded."
+msgstr "Ein Teil des Falles %d mit %d Einträgen wurde verworfen."
+
+#: src/language/data-io/data-parser.c:601
+#, c-format
+msgid "Partial case discarded. The first variable missing was %s."
+msgstr "Ein Teil des Falles wurde verworfen. Die erste fehlende Variable ist %s."
+
+#: src/language/data-io/data-parser.c:643
+#, c-format
+msgid "Missing value(s) for all variables from %s onward. These will be filled with the system-missing value or blanks, as appropriate."
+msgstr "Fehlender Wert oder Werte für alle Variablen ab %s. Diese werden mit system-fehlenden Werten oder Leerzeichen aufgefüllt, je nachdem was jeweils angebracht erscheint."
+
+#: src/language/data-io/data-parser.c:663
+msgid "Record ends in data not part of any field."
+msgstr "Eintrag endet mit Daten nicht nicht Teil eines Feldes sind."
+
+#: src/language/data-io/data-parser.c:683 src/language/data-io/print.c:447
+msgid "Record"
+msgstr "Datensatz"
+
+#: src/language/data-io/data-parser.c:684 src/language/data-io/print.c:448
+#: src/ui/gui/psppire-var-sheet.c:1385
+msgid "Columns"
+msgstr "Spalten"
+
+#: src/language/data-io/data-parser.c:685
+#: src/language/data-io/data-parser.c:722 src/language/data-io/print.c:449
+msgid "Format"
+msgstr "Format"
+
+#: src/language/data-io/data-parser.c:703
+#, c-format
+msgid "Reading %d record from %s."
+msgid_plural "Reading %d records from %s."
+msgstr[0] "%d Eintrag wird von %s gelesen."
+msgstr[1] "%d Einträge werden von %s gelesen."
+
+#: src/language/data-io/data-parser.c:737
+#, c-format
+msgid "Reading free-form data from %s."
+msgstr "Unformatierte Daten werden aus %s gelesen."
+
+#. TRANSLATORS: this fragment will be interpolated into
+#. messages in fh_lock() that identify types of files.
+#: src/language/data-io/data-reader.c:138
+#: src/language/data-io/data-writer.c:79
+msgid "data file"
+msgstr "Arbeitsdatei"
+
+#: src/language/data-io/data-reader.c:163
+#, c-format
+msgid "Could not open `%s' for reading as a data file: %s."
+msgstr "`%s' konnte nicht als Datendatei zum Lesen geöffnet werden: %s."
+
+#: src/language/data-io/data-reader.c:180
+#, c-format
+msgid "Could not read `%s' as a text file with encoding `%s': %s."
+msgstr "`%s' konnte nicht als Textdatei mit der Kodierung `%s' gelesen werden: %s."
+
+#: src/language/data-io/data-reader.c:239
+#, c-format
+msgid "Missing %s while reading inline data. This probably indicates a missing or incorrectly formatted %s command. %s must appear by itself on a single line with exactly one space between words."
+msgstr "Beim Einlesen von Inline-Daten fehlt %s. Dies deutet auf den fehlenden oder falsch formatierten Befehl %s hin. %s muss in einer eigenen Zeile mit genau einem Leerzeichen zwischen den Wörtern stehen."
+
+#: src/language/data-io/data-reader.c:259
+#: src/language/data-io/data-reader.c:393
+#, c-format
+msgid "Error reading file %s: %s."
+msgstr "Fehler beim Lesen der Datei %s: %s."
+
+#: src/language/data-io/data-reader.c:267
+#, c-format
+msgid "Unexpected end of file in partial record reading %s."
+msgstr "Unerwartetes Dateiende in einem unvollständigen Eintrag beim Lesen von %s."
+
+#: src/language/data-io/data-reader.c:327
+#, c-format
+msgid "Corrupt block descriptor word at offset 0x%lx in %s."
+msgstr "Fehlerhaftes Blockbeschreibungswort beim Offset 0x%lx in %s."
+
+#: src/language/data-io/data-reader.c:328
+#, c-format
+msgid "Corrupt record descriptor word at offset 0x%lx in %s."
+msgstr "Fehlerhaftes Eintragsbeschreibungswort beim Offset 0x%lx in %s."
+
+#: src/language/data-io/data-reader.c:341
+#, c-format
+msgid "Corrupt record size at offset 0x%lx in %s."
+msgstr "Fehlerhafte Eintragslänge beim Offset 0x%lx in %s."
+
+#: src/language/data-io/data-reader.c:499
+msgid "Record exceeds remaining block length."
+msgstr "Der Eintrag übersteigt die verbleibende Blocklänge."
+
+#: src/language/data-io/data-reader.c:573
+#, c-format
+msgid "Attempt to read beyond end-of-file on file %s."
+msgstr "Es wurde versucht in der Datei %s über das Ende hinaus zu lesen."
+
+#: src/language/data-io/data-reader.c:576
+#, c-format
+msgid "Attempt to read beyond %s."
+msgstr "Es wurde versucht über %s hinaus zu lesen."
+
+#: src/language/data-io/data-reader.c:764
+msgid "This command is not valid here since the current input program does not access the inline file."
+msgstr "Dieser Befehl ist hier nicht gültig, da das aktuelle Eingabeprogramm keinen Zugriff auf die Inline-Datei hat."
+
+#: src/language/data-io/data-writer.c:107
+#, c-format
+msgid "An error occurred while opening `%s' for writing as a data file: %s."
+msgstr "Beim Öffnen von `%s' um eine Datendatei zu schreiben, ist ein Fehler aufgetreten: %s."
+
+#: src/language/data-io/data-writer.c:225
+#, c-format
+msgid "I/O error occurred writing data file `%s'."
+msgstr "Ein I/O Fehler ist beim Schreiben der Datendatei `%s' aufgetreten."
+
+#: src/language/data-io/dataset.c:63
+#, c-format
+msgid "There is no dataset named %s."
+msgstr "Es gibt keinen Datensatz namens %s."
+
+#: src/language/data-io/dataset.c:265
+msgid "unnamed dataset"
+msgstr "unbenannter Datensatz"
+
+#: src/language/data-io/dataset.c:269
+msgid "(active dataset)"
+msgstr "(aktiver Datensatz)"
+
+#: src/language/data-io/get-data.c:141
+#, c-format
+msgid "Unsupported TYPE %s."
+msgstr "TYPE %s wird nicht unterstützt."
+
+#: src/language/data-io/get-data.c:276
+msgid "The sheet index must be greater than or equal to 1"
+msgstr "Die Nummer des Datenblatts muss größer oder gleich 1 sein"
+
+#: src/language/data-io/get-data.c:283 src/language/data-io/get-data.c:306
+#: src/language/data-io/get-data.c:325
+#, c-format
+msgid "%s must be followed by either \"%s\" or \"%s\"."
+msgstr "Nach %s muss entweder von \"%s\" oder \"%s\" folgen."
+
+#: src/language/data-io/get-data.c:355
+#, c-format
+msgid "%s is allowed only with %s arrangement, but %s arrangement was stated or implied earlier in this command."
+msgstr "%s ist nur in Verbindung mit /ARRAGEMENT=%s erlaubt, aber es wurde entweder explizit oder implizit in diesem Befehl an früherer Stelle festegelegt, dass /ARRAGEMENT=%s sein soll."
+
+#: src/language/data-io/get-data.c:436 src/language/data-io/get-data.c:474
+#: src/language/data-io/get-data.c:494
+#, c-format
+msgid "Value of %s must be 1 or greater."
+msgstr "Der Wert von %s muss 1 oder mehr betragen."
+
+#: src/language/data-io/get-data.c:506
+#, c-format
+msgid "Value of %s must be between 1 and 100."
+msgstr "Der Wert von %s muss zwischen 1 und 100 liegen."
+
+#: src/language/data-io/get-data.c:557
+msgid "In compatible syntax mode, the QUALIFIER string must contain exactly one character."
+msgstr "Im Modus Kompatible Syntax muss der String QUALIFIER genau ein Zeichen enthalten."
+
+#: src/language/data-io/get-data.c:592
+#: src/language/data-io/placement-parser.c:406
+#, c-format
+msgid "The record number specified, %ld, is at or before the previous record, %d. Data fields must be listed in order of increasing record number."
+msgstr "Die angegebene Nummer des Eintrags, %ld, liegt beim oder vor dem vorhergehenden Eintrag, %d. Datenfelder müssen in aufsteigender Reihenfolge aufgelistet werden."
+
+#: src/language/data-io/get-data.c:601
+#, c-format
+msgid "The record number specified, %ld, exceeds the number of records per case specified on FIXCASE, %d."
+msgstr "Die angegebene Nummer des Eintrags, %ld, übersteigt die Anzahl der Einträge pro Fall, %d, die mit FIXCASE festgelegt wurde."
+
+#: src/language/data-io/inpt-pgm.c:133
+#, c-format
+msgid "Unexpected end-of-file within %s."
+msgstr "Unerwartetes Dateiende innerhalb von %s."
+
+#: src/language/data-io/inpt-pgm.c:146
+#, c-format
+msgid "Input program must contain %s or %s."
+msgstr "INPUT PROGRAM muss %s oder %s enthalten."
+
+#: src/language/data-io/inpt-pgm.c:152
+msgid "Input program did not create any variables."
+msgstr "INPUT PROGRAM hat keine Variablen erzeugt."
+
+#: src/language/data-io/inpt-pgm.c:365
+msgid "REREAD: Column numbers must be positive finite numbers. Column set to 1."
+msgstr "REREAD: Die Spaltennummer muss eine positive endliche Zahl sein. Spaltennummer wird auf 1 gesetzt."
+
+#: src/language/data-io/list.c:227
+#, c-format
+msgid "The first case (%ld) specified precedes the last case (%ld) specified. The values will be swapped."
+msgstr "Der erste angegebene Fall (%ld) liegt vor dem letzten angegebenen Fall (%ld). Die Werte werden vertauscht."
+
+#: src/language/data-io/list.c:236
+#, c-format
+msgid "The first case (%ld) to list is less than 1. The value is being reset to 1."
+msgstr "Der erste auzulistende Fall (%ld) ist kleiner als 1. Der Wert wird auf 1 gesetzt."
+
+#: src/language/data-io/list.c:243
+#, c-format
+msgid "The last case (%ld) to list is less than 1. The value is being reset to 1."
+msgstr "Der letzte auzulistende Fall (%ld) ist kleiner als 1. Der Wert wird auf 1 gesetzt."
+
+#: src/language/data-io/list.c:250
+#, c-format
+msgid "The step value %ld is less than 1. The value is being reset to 1."
+msgstr "Die Schrittgröße %ld ist kleiner als 1. Der Wert wird auf 1 gesetzt."
+
+#: src/language/data-io/placement-parser.c:96
+#, c-format
+msgid "Number of variables specified (%zu) differs from number of variable formats (%zu)."
+msgstr "Die Anzahl der angegebenen Variablen (%zu) stimmt nicht mit der Anzahl der Variablenformate (%zu) überein."
+
+#: src/language/data-io/placement-parser.c:106
+msgid "SPSS-like or Fortran-like format specification expected after variable names."
+msgstr "Nach dem Variablennamen wurde ein Format im SPSS- oder FORTRAN-Stil erwartet."
+
+#: src/language/data-io/placement-parser.c:129
+#, c-format
+msgid "The %d columns %d-%d can't be evenly divided into %zu fields."
+msgstr "Die %d Spalten %d-%d können nicht gleichmäßig auf %zu Felder verteilt werden."
+
+#: src/language/data-io/placement-parser.c:310
+msgid "Column positions for fields must be positive."
+msgstr "Die Spaltenpositionen für die Felder müssen positiv sein."
+
+#: src/language/data-io/placement-parser.c:312
+msgid "Column positions for fields must not be negative."
+msgstr "Die Spaltenpositionen für die Felder dürfen nicht negativ sein."
+
+#: src/language/data-io/placement-parser.c:372
+msgid "The ending column for a field must be greater than the starting column."
+msgstr "Die Endspalte eines Feldes muss größer als die Anfangsspalte sein."
+
+#: src/language/data-io/print-space.c:127
+#, c-format
+msgid "The expression on %s evaluated to the system-missing value."
+msgstr "Der Ausdruck in %s wurde als system-fehlender Wert ausgewertet."
+
+#: src/language/data-io/print-space.c:130
+#, c-format
+msgid "The expression on %s evaluated to %g."
+msgstr "Der Ausdruck in %s wurde als %g ausgewertet."
+
+#: src/language/data-io/print.c:193 src/language/data-io/trim.c:54
+msgid "expecting a valid subcommand"
+msgstr "es wurde ein gültiger Unterbefehl erwartet"
+
+#: src/language/data-io/print.c:223
+#, c-format
+msgid "%s is required when binary formats are specified."
+msgstr "Bei der Angabe von Binärformaten ist %s erforderlich."
+
+#: src/language/data-io/print.c:306
+#, c-format
+msgid "Output calls for %d records but %zu specified on RECORDS subcommand."
+msgstr "Die Ausgabe erfordert %d Einträge, es wurden aber mit den Unterbefehl RECORDS %zu Einträge angegeben."
+
+#: src/language/data-io/print.c:479
+#, c-format
+msgid "Writing %zu record to %s."
+msgid_plural "Writing %zu records to %s."
+msgstr[0] "%zu Eintrag wird in %s geschrieben."
+msgstr[1] "%zu Einträge werden in %s geschrieben."
+
+#: src/language/data-io/print.c:483
+#, c-format
+msgid "Writing %zu record."
+msgid_plural "Writing %zu records."
+msgstr[0] "%zu Eintrag wird geschrieben."
+msgstr[1] "%zu Einträge werden geschrieben."
+
+#: src/language/data-io/save-translate.c:167
+#: src/language/data-io/save-translate.c:182
+#, c-format
+msgid "The %s string must contain exactly one character."
+msgstr "Der %s String muss genau ein Zeichen enthalten."
+
+#: src/language/data-io/save-translate.c:252
+#, c-format
+msgid "Output file `%s' exists but %s was not specified."
+msgstr "Die Ausgabedatei `%s' existiert, aber %s wurde nicht angegeben."
+
+#: src/language/data-io/trim.c:89
+#, c-format
+msgid "Cannot rename %s as %s because there already exists a variable named %s. To rename variables with overlapping names, use a single RENAME subcommand such as `/RENAME (A=B)(B=C)(C=A)', or equivalently, `/RENAME (A B C=B C A)'."
+msgstr "%s kann nicht zu %s umbenannt werden, weil eine Variable mit dem Namen %s bereits existiert. Um mehrere Variablen mit sich gegenseitig überlappenden Namen umzubenennen, verwenden Sie den Unterbefehl RENAME, wie z.B. in `/RENAME (A=B)(B=C)(C=A)' oder auch gleichbedeutend in `/RENAME (A B C=B C A)'."
+
+#: src/language/data-io/trim.c:123
+#, c-format
+msgid "Number of variables on left side of `=' (%zu) does not match number of variables on right side (%zu), in parenthesized group %d of RENAME subcommand."
+msgstr "Die Anzahl der Variablen auf der linken Seite von `=' (%zu) stimmt nicht mit der Anzahl der Variablen auf der rechten Seite (%zu) in der eingeklammerten Gruppe %d des Befehls RENAME überein."
+
+#: src/language/data-io/trim.c:136
+#, c-format
+msgid "Requested renaming duplicates variable name %s."
+msgstr "Es wurde angefragt, ob der doppelte Variablenname %s umbenannt werden soll."
+
+#: src/language/data-io/trim.c:167
+msgid "Cannot DROP all variables from dictionary."
+msgstr "Mit DROP können nicht alle Variablen aus dem Codebuch gelöscht werden."
+
+#: src/language/expressions/evaluate.c:151
+msgid "expecting number or string"
+msgstr "es wurde eine Zahl oder eine Zeichenfolge erwartet"
+
+#: src/language/expressions/helpers.c:41
+msgid "One of the arguments to a DATE function is not an integer. The result will be system-missing."
+msgstr "Eines der Argumente der Funktion DATE ist nicht vom Typ Integer. Das Ergebnis ist system-fehlender Wert."
+
+#: src/language/expressions/helpers.c:69
+msgid "The week argument to DATE.WKYR is not an integer. The result will be system-missing."
+msgstr "Das Argument week der Funktion DATE.WKYR ist nicht vom Typ Integer. Das Ergebnis ist system-fehlender Wert."
+
+#: src/language/expressions/helpers.c:75
+msgid "The week argument to DATE.WKYR is outside the acceptable range of 1 to 53. The result will be system-missing."
+msgstr "Das Argument week der Funktion DATE.WKYR ist nicht innerhalb des akzeptierten Bereichs von 1 bis 53. Das Ergebnis ist system-fehlender Wert."
+
+#: src/language/expressions/helpers.c:97
+msgid "The day argument to DATE.YRDAY is not an integer. The result will be system-missing."
+msgstr "Das Argument day der Funktion DATE.YRDAY ist nicht vom Typ Integer. Das Ergebnis ist system-fehlender Wert."
+
+#: src/language/expressions/helpers.c:103
+msgid "The day argument to DATE.YRDAY is outside the acceptable range of 1 to 366. The result will be system-missing."
+msgstr "Das Argument Tag der Funktion DATE.YRDAY ist nicht innerhalb des akzeptierten Bereichs von 1 bis 366. Das Ergebnis ist system-fehlender Wert."
+
+#: src/language/expressions/helpers.c:125
+msgid "The year argument to YRMODA is greater than 47516. The result will be system-missing."
+msgstr "Das Argument year in YRMODA ist größer als 47516. Das Ergebnis ist system-fehlender Wert."
+
+#: src/language/expressions/helpers.c:178
+#, c-format
+msgid "Unrecognized date unit `%.*s'. Valid date units are `%s', `%s', `%s', `%s', `%s', `%s', `%s', and `%s'."
+msgstr "Nicht erkannte Datumsangabe `%.*s'. Gültige Datumsangaben sind `%s', `%s', `%s', `%s', `%s', `%s', `%s' und `%s'."
+
+#: src/language/expressions/helpers.c:331
+#, c-format
+msgid "Invalid DATESUM method. Valid choices are `%s' and `%s'."
+msgstr "Ungültige Methode DATESUM. Zur Auswahl stehen `%s' und `%s'."
+
+#: src/language/expressions/parse.c:261
+#, c-format
+msgid "Type mismatch: expression has %s type, but a numeric value is required here."
+msgstr "Diskrepanz der Typen: der Ausdruck ist vom Typ %s, aber an dieser Stelle ist ein numerischer Wert erforderlich."
+
+#: src/language/expressions/parse.c:274
+#, c-format
+msgid "Type mismatch: expression has %s type, but a string value is required here."
+msgstr "Diskrepanz der Typen: der Ausdruck ist vom Typ %s, aber an dieser Stelle ist ein String erforderlich."
+
+#: src/language/expressions/parse.c:436
+#, c-format
+msgid "Type mismatch while applying %s operator: cannot convert %s to %s."
+msgstr "Diskrepanz der Typen bei der Anwendung des Operators %s: %s kann nicht zu %s umgewandelt werden."
+
+#: src/language/expressions/parse.c:650
+msgid "Chaining relational operators (e.g. `a < b < c') will not produce the mathematically expected result. Use the AND logical operator to fix the problem (e.g. `a < b AND b < c'). If chaining is really intended, parentheses will disable this warning (e.g. `(a < b) < c'.)"
+msgstr "Die Verkettung relationaler Operatoren (z.B. `a < b < c') führt nicht zum erwarteten mathematischen Ergebnis. Verwenden Sie den Logikoperator AND, um dieses Problem zi beheben (z.B. `a < b AND b < c'). Falls Sie tatsächlich eine Verkettung vornehmen wollen, verwenden Sie Klammern, um diese Warnung zu unterdrücken (z.B. `(a < b) < c')."
+
+#: src/language/expressions/parse.c:752
+msgid "The exponentiation operator (`**') is left-associative, even though right-associative semantics are more useful. That is, `a**b**c' equals `(a**b)**c', not as `a**(b**c)'. To disable this warning, insert parentheses."
+msgstr "Der Operator für Exponenten (`**') ist immer mit dem linken Argument verknüpft, obwohl eine rechts-seitige Verknüpfung praktischer wäre. D.h. der Ausdruck `a**b**c' ist gleichbedeutend mit `(a**b)**c', aber nicht mit dem Ausdruck `a**(b**c)'. Um diese Warnung zu unterdrücken, fügen Sie die passenden Klammern ein."
+
+#: src/language/expressions/parse.c:832
+#, c-format
+msgid "Unknown system variable %s."
+msgstr "Unbekannt Systemvariable %s."
+
+#: src/language/expressions/parse.c:880
+#, c-format
+msgid "Unknown identifier %s."
+msgstr "Unbekannter Bezeichner %s."
+
+#: src/language/expressions/parse.c:1102
+#, c-format
+msgid "%s must have at least %d arguments in list."
+msgstr "%s muss mindestens %d Argumente in der Liste haben."
+
+#: src/language/expressions/parse.c:1111
+#, c-format
+msgid "%s must have an even number of arguments in list."
+msgstr "%s muss eine gerade Anzahl von Argumenten in der Liste haben."
+
+#: src/language/expressions/parse.c:1114
+#, c-format
+msgid "%s must have multiple of %d arguments in list."
+msgstr "%s muss ein Vielfachenes von %d Argumenten in der Liste haben."
+
+#: src/language/expressions/parse.c:1124
+#, c-format
+msgid "%s function does not accept a minimum valid argument count."
+msgstr "Für die Funktion %s kann die minimale Anzahl von gültigen Argumenten nicht festgelegt werden."
+
+#: src/language/expressions/parse.c:1133
+#, c-format
+msgid "%s requires at least %d valid arguments in list."
+msgstr "%s erfordert mindestens %d gültige Argumente in der Liste."
+
+#: src/language/expressions/parse.c:1139
+#, c-format
+msgid "With %s, using minimum valid argument count of %d does not make sense when passing only %d arguments in list."
+msgstr "Beim der Verwendung von %s ergibt es keinen Sinn die minimale Anzahl von %d Argumenten anzugeben, wenn in der Liste nur %d Argumente übergeben werden. "
+
+#: src/language/expressions/parse.c:1193
+#, c-format
+msgid "Type mismatch invoking %s as "
+msgstr "Diskrepanz der Typen beim Aufruf von %s als "
+
+#: src/language/expressions/parse.c:1198
+msgid "Function invocation "
+msgstr "Funktionaufruf "
+
+#: src/language/expressions/parse.c:1200
+msgid " does not match any known function. Candidates are:"
+msgstr " passt nicht zu einer bekannten Funktion. Mögliche Kandidaten wären:"
+
+#: src/language/expressions/parse.c:1230
+#, c-format
+msgid "No function or vector named %s."
+msgstr "Eine Funktion oder einen Vektor mit dem Namen %s gibt es nicht."
+
+#: src/language/expressions/parse.c:1292
+#, c-format
+msgid "%s is a PSPP extension."
+msgstr "%s ist eine PSPP-Erweiterung."
+
+#: src/language/expressions/parse.c:1295
+#, c-format
+msgid "%s is not available in this version of PSPP."
+msgstr "%s ist in dieser Version von PSPP nicht verfügbar."
+
+#: src/language/expressions/parse.c:1302
+#, c-format
+msgid "%s may not appear after %s."
+msgstr "%s darf nicht nach %s erscheinen."
+
+#: src/libpspp/ext-array.c:66
+msgid "failed to create temporary file"
+msgstr "die temporäre Datei konnte nicht erzeugt werden"
+
+#: src/libpspp/ext-array.c:106
+msgid "seeking in temporary file"
+msgstr "in der temporären Datei wird gesucht"
+
+#: src/libpspp/ext-array.c:125
+msgid "reading temporary file"
+msgstr "die temporäre Datei wird gelesen"
+
+#: src/libpspp/ext-array.c:127
+msgid "unexpected end of file reading temporary file"
+msgstr "unerwartetes Ende der Datei beim Lesen der temporären Datei"
+
+#: src/libpspp/ext-array.c:147
+msgid "writing to temporary file"
+msgstr "es wird in die temporäre Datei geschrieben"
+
+#: src/libpspp/inflate.c:87
+#, c-format
+msgid "Cannot initialize inflator: %s"
+msgstr "Das Programm zur Dekomprimierung konnte nicht gestartet werden: %s"
+
+#: src/libpspp/inflate.c:142
+#, c-format
+msgid "Error inflating: %s"
+msgstr "Fehler bei der Dekomprimierung: %s"
+
+#: src/libpspp/i18n.c:1003
+msgid "Arabic"
+msgstr "Arabisch"
+
+#: src/libpspp/i18n.c:1005
+msgid "Armenian"
+msgstr "Armenisch"
+
+#: src/libpspp/i18n.c:1006
+msgid "Baltic"
+msgstr "Baltisch"
+
+#: src/libpspp/i18n.c:1008
+msgid "Celtic"
+msgstr "Keltisch"
+
+#: src/libpspp/i18n.c:1009
+msgid "Central European"
+msgstr "Zentraleuropäisch"
+
+#: src/libpspp/i18n.c:1011
+msgid "Chinese Simplified"
+msgstr "Chinesisch, vereinfacht"
+
+#: src/libpspp/i18n.c:1013
+msgid "Chinese Traditional"
+msgstr "Chinesisch, traditionell"
+
+#: src/libpspp/i18n.c:1015
+msgid "Croatian"
+msgstr "Kroatisch"
+
+#: src/libpspp/i18n.c:1016
+msgid "Cyrillic"
+msgstr "Kyrillisch"
+
+#: src/libpspp/i18n.c:1018
+msgid "Cyrillic/Russian"
+msgstr "Kyrillisch, Russisch"
+
+#: src/libpspp/i18n.c:1019
+msgid "Cyrillic/Ukrainian"
+msgstr "Kyrillisch, Ukrainisch"
+
+#: src/libpspp/i18n.c:1021
+msgid "Georgian"
+msgstr "Georgisch"
+
+#: src/libpspp/i18n.c:1022
+msgid "Greek"
+msgstr "Griechisch"
+
+#: src/libpspp/i18n.c:1023
+msgid "Gujarati"
+msgstr "Gujaratisch"
+
+#: src/libpspp/i18n.c:1024
+msgid "Gurmukhi"
+msgstr "Gurmukhi"
+
+#: src/libpspp/i18n.c:1025
+msgid "Hebrew"
+msgstr "Hebräisch"
+
+#: src/libpspp/i18n.c:1027
+msgid "Hebrew Visual"
+msgstr "Hebräisch, visuell"
+
+#: src/libpspp/i18n.c:1028
+msgid "Hindi"
+msgstr "Hindi"
+
+#: src/libpspp/i18n.c:1029
+msgid "Icelandic"
+msgstr "Isländisch"
+
+#: src/libpspp/i18n.c:1030
+msgid "Japanese"
+msgstr "Japanisch"
+
+#: src/libpspp/i18n.c:1032
+msgid "Korean"
+msgstr "Koreanisch"
+
+#: src/libpspp/i18n.c:1034
+msgid "Nordic"
+msgstr "Nordisch"
+
+#: src/libpspp/i18n.c:1035
+msgid "Romanian"
+msgstr "Rumänisch"
+
+#: src/libpspp/i18n.c:1037
+msgid "South European"
+msgstr "Südeuropäisch"
+
+#: src/libpspp/i18n.c:1038
+msgid "Thai"
+msgstr "Thailändisch"
+
+#: src/libpspp/i18n.c:1040
+msgid "Turkish"
+msgstr "Türkisch"
+
+#: src/libpspp/i18n.c:1042
+msgid "Vietnamese"
+msgstr "Vietnamesisch"
+
+#: src/libpspp/i18n.c:1044
+msgid "Western European"
+msgstr "Westeuropäisch"
+
+#: src/libpspp/message.c:97
+#, c-format
+msgid "%s: %s"
+msgstr "%s: %s"
+
+#: src/libpspp/message.c:120
+msgid "error"
+msgstr "Fehler"
+
+#: src/libpspp/message.c:122
+msgid "warning"
+msgstr "Warnung"
+
+#: src/libpspp/message.c:125
+msgid "note"
+msgstr "Hinweis"
+
+#: src/libpspp/message.c:338
+#, c-format
+msgid "Notes (%d) exceed limit (%d). Suppressing further notes."
+msgstr "Anzahl der Meldungen (%d) hat die Grenze (%d) überschritten. Weitere Meldungen werden unterdrückt."
+
+#: src/libpspp/message.c:346
+#, c-format
+msgid "Warnings (%d) exceed limit (%d). Syntax processing will be halted."
+msgstr "Anzahl der Warnmeldungen (%d) hat die Grenze (%d) überschritten. Verarbeitung der Syntax wird angehalten."
+
+#: src/libpspp/message.c:349
+#, c-format
+msgid "Errors (%d) exceed limit (%d). Syntax processing will be halted."
+msgstr "Anzahl der Fehler (%d) hat die Grenze (%d) überschritten. Verarbeitung der Syntax wird angehalten."
+
+#: src/libpspp/zip-reader.c:84
+#, c-format
+msgid "Unsupported compression type (%d)"
+msgstr "Komprimierungstyp (%d) wird nicht unterstützt"
+
+#: src/libpspp/zip-reader.c:197
+#, c-format
+msgid "Corrupt file at 0x%llx: Expected %<PRIx32>; got %<PRIx32>"
+msgstr "Fehlerhafte Datei an der Stelle 0x%llx: erwartet %<PRIx32>; gefunden %<PRIx32>"
+
+#: src/libpspp/zip-reader.c:321
+msgid "Cannot find central directory"
+msgstr "Das Hauptverzeichnis konnte nicht gefunden werden."
+
+#: src/libpspp/zip-reader.c:330
+#, c-format
+msgid "Failed to seek to end of central directory record: %s"
+msgstr "Fehler bei der Suche nach dem Ende des Hauptverzeichnis-Eintrags: %s"
+
+#: src/libpspp/zip-reader.c:356
+#, c-format
+msgid "Failed to seek to central directory: %s"
+msgstr "Fehler bei der Suche nach dem Hauptverzeichnis: %s"
+
+#: src/libpspp/zip-reader.c:411
+#, c-format
+msgid "Failed to seek to start of member `%s': %s"
+msgstr "Fehler bei der Suche des Anfangs des Elements `%s': %s"
+
+#: src/libpspp/zip-reader.c:442
+#, c-format
+msgid "Name mismatch in zip archive. Central directory says `%s'; local file header says `%s'"
+msgstr "Diskrepanz zwischen den Namen im Zip-Archiv. Das Hauptverzeichnis besagt `%s'; der lokale Dateikopf besagt `%s'"
+
+#: src/libpspp/zip-writer.c:96
+#, c-format
+msgid "%s: error opening output file"
+msgstr "%s: Fehler beim Öffnen der Ausgabedatei"
+
+#: src/libpspp/zip-writer.c:168
+#, c-format
+msgid "%s: error seeking in output file"
+msgstr "%s: Fehler beim Durchsuchen der Ausgabedatei"
+
+#: src/libpspp/zip-writer.c:251
+#, c-format
+msgid "%s: write failed"
+msgstr "%s: Schreiben ist fehlgeschlagen"
+
+#. TRANSLATORS: This is a format string which, when presented to
+#. printf like functions, will create a pango markup string to
+#. display real number in scientific notation.
+#.
+#. In its untranslated form, it will display similar to "1.23 x 10^4". You
+#. can leave it untranslated if this is how scientific notation is usually
+#. presented in your language.
+#.
+#. Some locales (such as German) prefer the centered dot rather than the
+#. multiplication sign between the mantissa an exponent. In which
+#. case, you can change "#215;" to "#8901;" or other unicode code
+#. point as appropriate.
+#.
+#. The . in this string does not and should not be changed, since
+#. that is taken care of by the stdc library.
+#.
+#. For information on Pango markup, see
+#. http://developer.gnome.org/pango/stable/PangoMarkupFormat.html
+#.
+#. For tables of unicode code points, see http://unicode.org/charts
+#.
+#: src/math/chart-geometry.c:123
+#, c-format
+msgid "%%.%dlf×10<sup>%d</sup>"
+msgstr "%%.%dlf×10<sup>%d</sup>"
+
+#: src/math/histogram.c:136
+msgid "Not creating histogram because the data contains less than 2 distinct values"
+msgstr "Ein Histogramm wird nicht erzeugt, weil die Daten weniger als 2 verschiedene Wertausprägungen enthalten."
+
+#: src/math/percentiles.c:36
+msgid "HAverage"
+msgstr "HAverage"
+
+#: src/math/percentiles.c:37
+msgid "Weighted Average"
+msgstr "Gewichteter Durchschnitt"
+
+#: src/math/percentiles.c:38
+msgid "Rounded"
+msgstr "Gerundet"
+
+#: src/math/percentiles.c:39
+msgid "Empirical"
+msgstr "Empirisch"
+
+#: src/math/percentiles.c:40
+msgid "Empirical with averaging"
+msgstr "Empirisch mit Durchschnittsbildung"
+
+#: src/output/ascii.c:323
+#, c-format
+msgid "%s: %s must be positive integer or `auto'"
+msgstr "%s: %s muss eine positive ganze Zahl sein oder `auto'"
+
+#: src/output/ascii.c:356
+#, c-format
+msgid "ascii: page excluding margins and headers must be at least %d characters wide by %d lines long, but as configured is only %d characters by %d lines"
+msgstr "ASCII: eine Seite ohne Ränder und Kopf muss mindestens %d Zeichen breit und %d Zeilen lang sein, aber laut Konfiguration hat sie nur %d Zeichen und %d Zeilen"
+
+#: src/output/ascii.c:404
+#, c-format
+msgid "ascii: closing output file `%s'"
+msgstr "ASCII: die Ausgabedatei `%s' wird geschlossen"
+
+#: src/output/ascii.c:501
+#, c-format
+msgid "See %s for a chart."
+msgstr "Siehe Diagramm in der Datei %s."
+
+#: src/output/ascii.c:1113
+#, c-format
+msgid "ascii: opening output file `%s'"
+msgstr "ASCII: die Ausgabedatei `%s' wird geöffnet"
+
+#: src/output/ascii.c:1170
+#, c-format
+msgid "%s - Page %d"
+msgstr "%s - Seite %d"
+
+#: src/output/charts/piechart.c:54
+msgid "*MISSING*"
+msgstr "*FEHLEND*"
+
+#: src/output/csv.c:99 src/output/html.c:114 src/output/journal.c:174
+#: src/output/msglog.c:66
+#, c-format
+msgid "error opening output file `%s'"
+msgstr "Fehler beim Öffnen der Ausgabedatei `%s'"
+
+#: src/output/driver.c:374
+#, c-format
+msgid "%s is not a valid device type (the choices are `%s' and `%s')"
+msgstr "%s ist kein gültiger Gerätetyp (zur Auswahl stehen `%s' und `%s')"
+
+#: src/output/driver.c:386
+#, c-format
+msgid "%s: unknown option `%s'"
+msgstr "%s: unbekannte Option `%s'"
+
+#: src/output/html.c:122
+msgid "PSPP Output"
+msgstr "PSPP Ausgabe"
+
+#: src/output/html.c:255
+msgid "No description"
+msgstr "Keine Beschreibung"
+
+#: src/output/journal.c:70
+#, c-format
+msgid "error writing output file `%s'"
+msgstr "Fehler beim Schreiben der Ausgabedatei `%s'"
+
+#: src/output/measure.c:68
+#, c-format
+msgid "`%s' is not a valid length."
+msgstr "`%s' ist keine gültige Länge."
+
+#: src/output/measure.c:96
+#, c-format
+msgid "syntax error in paper size `%s'"
+msgstr "Syntaxfehler bei der Papiergröße `%s'"
+
+#: src/output/measure.c:233
+#, c-format
+msgid "unknown paper type `%.*s'"
+msgstr "Unbekannter Papiertyp `%.*s'"
+
+#: src/output/measure.c:251
+#, c-format
+msgid "error opening input file `%s'"
+msgstr "Fehler beim Öffnen der Eingabedatei `%s'"
+
+#: src/output/measure.c:262
+#, c-format
+msgid "error reading file `%s'"
+msgstr "Fehler beim Lesen der Datei `%s'"
+
+#: src/output/measure.c:279
+#, c-format
+msgid "paper size file `%s' does not state a paper size"
+msgstr "Papiergröße-Datei `%s' legt keine Papiergröße fest"
+
+#: src/output/options.c:112
+#, c-format
+msgid "%s: `%s' is `%s' but a Boolean value is required"
+msgstr "%s: `%s' ist `%s', es ist aber ein Boolscher Wert erfoderlich"
+
+#: src/output/options.c:187
+#, c-format
+msgid "%s: `%s' is `%s' but one of the following is required: %s"
+msgstr "%s: `%s' ist `%s', es ist aber einer der folgenden erfoderlich: %s"
+
+#: src/output/options.c:231
+#, c-format
+msgid "%s: `%s' is `%s' but a nonnegative integer is required"
+msgstr "%s: `%s' ist `%s', es ist aber ein nicht-negativer, ganzzahliger Wert erfoderlich"
+
+#: src/output/options.c:235
+#, c-format
+msgid "%s: `%s' is `%s' but a positive integer is required"
+msgstr "%s: `%s' ist `%s', es ist aber ein positiver, ganzzahliger Wert erfoderlich"
+
+#: src/output/options.c:238
+#, c-format
+msgid "%s: `%s' is `%s' but an integer is required"
+msgstr "%s: `%s' ist `%s', es ist aber ein ganzzahliger Wert erfoderlich"
+
+#: src/output/options.c:241
+#, c-format
+msgid "%s: `%s' is `%s' but an integer greater than %d is required"
+msgstr "%s: `%s' ist `%s', es ist aber ein ganzzahliger Wert größer als %d erfoderlich"
+
+#: src/output/options.c:246
+#, c-format
+msgid "%s: `%s' is `%s' but an integer between %d and %d is required"
+msgstr "%s: `%s' ist `%s', es ist aber ein ganzzahliger Wert zwischen %d und %d erfoderlich"
+
+#: src/output/options.c:325
+#, c-format
+msgid "%s: `%s' is `%s' but a file name that contains `#' is required."
+msgstr "%s: `%s' ist `%s', es ist aber ein Dateiname mit `#' erforderlich."
+
+#: src/output/tab.c:240
+#, c-format
+msgid "bad vline: x=%d+%d=%d y=(%d+%d=%d,%d+%d=%d) in table size (%d,%d)\n"
+msgstr "falsche Angabe vline: x=%d+%d=%d y=(%d+%d=%d,%d+%d=%d) in der Tabellen der Größe (%d,%d)\n"
+
+#: src/output/tab.c:278
+#, c-format
+msgid "bad hline: x=(%d+%d=%d,%d+%d=%d) y=%d+%d=%d in table size (%d,%d)\n"
+msgstr "falsche Angabe hline: x=(%d+%d=%d,%d+%d=%d) y=%d+%d=%d in der Tabell der Größe (%d,%d)\n"
+
+#: src/output/tab.c:322
+#, c-format
+msgid "bad box: (%d+%d=%d,%d+%d=%d)-(%d+%d=%d,%d+%d=%d) in table size (%d,%d)\n"
+msgstr "falsche Angabe box: (%d+%d=%d,%d+%d=%d)-(%d+%d=%d,%d+%d=%d) in Tabelle der Größe (%d,%d)\n"
+
+#: src/output/cairo.c:237
+#, c-format
+msgid "`%s': bad font specification"
+msgstr "`%s': falsche Angabe der Schriftart"
+
+#: src/output/cairo.c:435
+#, c-format
+msgid "error opening output file `%s': %s"
+msgstr "Fehler beim Öffnen der Ausgabedatei `%s': %s"
+
+#: src/output/cairo.c:452
+#, c-format
+msgid "The defined page is not wide enough to hold at least %d characters in the default font. In fact, there's only room for %d characters."
+msgstr "Das angegebene Seitenformat ist nicht groß genug, um in der Standardschriftart mindestens %d Zeichen darzustellen. Tatsächlich passen nur %d Zeichen auf eine Seite."
+
+#: src/output/cairo.c:462
+#, c-format
+msgid "The defined page is not long enough to hold at least %d lines in the default font. In fact, there's only room for %d lines."
+msgstr "Das angegebene Seitenformat ist nicht groß genug um in der Standardschriftart mindestens %d Zeilen darzustellen. Tatsächlich passen nur %d Zeilen auf eine Seite."
+
+#: src/output/cairo.c:513
+#, c-format
+msgid "error drawing output for %s driver: %s"
+msgstr "Fehler beim Zeichnen der Ausgabe für den Treiber %s: %s"
+
+#: src/output/cairo.c:1466
+#, c-format
+msgid "error writing output file `%s': %s"
+msgstr "Fehler beim Schreiben der Ausgabedatei `%s': %s"
+
+#: src/output/charts/np-plot-cairo.c:37
+#, c-format
+msgid "Normal Q-Q Plot of %s"
+msgstr "Normalitäts Q-Q-Plot für %s"
+
+#: src/output/charts/np-plot-cairo.c:38 src/output/charts/np-plot-cairo.c:65
+msgid "Observed Value"
+msgstr "Beobachteter Wert"
+
+#: src/output/charts/np-plot-cairo.c:39
+msgid "Expected Normal"
+msgstr "Erwartete Normale"