+/* IP fragment information.
+ *
+ * Prereqs:
+ * NXM_OF_ETH_TYPE must be either 0x0800 or 0x86dd.
+ *
+ * Format: 8-bit value with one of the values 0, 1, or 3, as described below.
+ *
+ * Masking: Fully maskable.
+ *
+ * This field has three possible values:
+ *
+ * - A packet that is not an IP fragment has value 0.
+ *
+ * - A packet that is an IP fragment with offset 0 (the first fragment) has
+ * bit 0 set and thus value 1.
+ *
+ * - A packet that is an IP fragment with nonzero offset has bits 0 and 1 set
+ * and thus value 3.
+ *
+ * NX_IP_FRAG_ANY and NX_IP_FRAG_LATER are declared to symbolically represent
+ * the meanings of bits 0 and 1.
+ *
+ * The switch may reject matches against values that can never appear.
+ *
+ * It is important to understand how this field interacts with the OpenFlow IP
+ * fragment handling mode:
+ *
+ * - In OFPC_FRAG_DROP mode, the OpenFlow switch drops all IP fragments
+ * before they reach the flow table, so every packet that is available for
+ * matching will have value 0 in this field.
+ *
+ * - Open vSwitch does not implement OFPC_FRAG_REASM mode, but if it did then
+ * IP fragments would be reassembled before they reached the flow table and
+ * again every packet available for matching would always have value 0.
+ *
+ * - In OFPC_FRAG_NORMAL mode, all three values are possible, but OpenFlow
+ * 1.0 says that fragments' transport ports are always 0, even for the
+ * first fragment, so this does not provide much extra information.
+ *
+ * - In OFPC_FRAG_NX_MATCH mode, all three values are possible. For
+ * fragments with offset 0, Open vSwitch makes L4 header information
+ * available.
+ */
+#define NXM_NX_IP_FRAG NXM_HEADER (0x0001, 26, 1)
+#define NXM_NX_IP_FRAG_W NXM_HEADER_W(0x0001, 26, 1)
+
+/* Bits in the value of NXM_NX_IP_FRAG. */
+#define NX_IP_FRAG_ANY (1 << 0) /* Is this a fragment? */
+#define NX_IP_FRAG_LATER (1 << 1) /* Is this a fragment with nonzero offset? */
+
+/* The flow label in the IPv6 header.
+ *
+ * Prereqs: NXM_OF_ETH_TYPE must match 0x86dd exactly.
+ *
+ * Format: 20-bit IPv6 flow label in least-significant bits.
+ *
+ * Masking: Not maskable. */
+#define NXM_NX_IPV6_LABEL NXM_HEADER (0x0001, 27, 4)
+
+/* The ECN of the IP header.
+ *
+ * Prereqs: NXM_OF_ETH_TYPE must be either 0x0800 or 0x86dd.
+ *
+ * Format: ECN in the low-order 2 bits.
+ *
+ * Masking: Not maskable. */
+#define NXM_NX_IP_ECN NXM_HEADER (0x0001, 28, 1)
+
+/* The time-to-live/hop limit of the IP header.
+ *
+ * Prereqs: NXM_OF_ETH_TYPE must be either 0x0800 or 0x86dd.
+ *
+ * Format: 8-bit integer.
+ *
+ * Masking: Not maskable. */
+#define NXM_NX_IP_TTL NXM_HEADER (0x0001, 29, 1)
+
+/* Flow cookie.
+ *
+ * This may be used to gain the OpenFlow 1.1-like ability to restrict
+ * certain NXM-based Flow Mod and Flow Stats Request messages to flows
+ * with specific cookies. See the "nx_flow_mod" and "nx_flow_stats_request"
+ * structure definitions for more details. This match is otherwise not
+ * allowed.
+ *
+ * Prereqs: None.
+ *
+ * Format: 64-bit integer in network byte order.
+ *
+ * Masking: Arbitrary masks. */
+#define NXM_NX_COOKIE NXM_HEADER (0x0001, 30, 8)
+#define NXM_NX_COOKIE_W NXM_HEADER_W(0x0001, 30, 8)