+@node FACTOR
+@section FACTOR
+
+@vindex FACTOR
+@cindex factor analysis
+@cindex principal components analysis
+@cindex principal axis factoring
+@cindex data reduction
+
+@display
+FACTOR VARIABLES=var_list
+
+ [ /METHOD = @{CORRELATION, COVARIANCE@} ]
+
+ [ /EXTRACTION=@{PC, PAF@}]
+
+ [ /ROTATION=@{VARIMAX, EQUAMAX, QUARTIMAX, NOROTATE@}]
+
+ [ /PRINT=[INITIAL] [EXTRACTION] [ROTATION] [UNIVARIATE] [CORRELATION] [COVARIANCE] [DET] [SIG] [ALL] [DEFAULT] ]
+
+ [ /PLOT=[EIGEN] ]
+
+ [ /FORMAT=[SORT] [BLANK(@var{n})] [DEFAULT] ]
+
+ [ /CRITERIA=[FACTORS(@var{n})] [MINEIGEN(@var{l})] [ITERATE(@var{m})] [ECONVERGE (@var{delta})] [DEFAULT] ]
+
+ [ /MISSING=[@{LISTWISE, PAIRWISE@}] [@{INCLUDE, EXCLUDE@}] ]
+@end display
+
+The FACTOR command performs Factor Analysis or Principal Axis Factoring on a dataset. It may be used to find
+common factors in the data or for data reduction purposes.
+
+The VARIABLES subcommand is required. It lists the variables which are to partake in the analysis.
+
+The /EXTRACTION subcommand is used to specify the way in which factors (components) are extracted from the data.
+If PC is specified, then Principal Components Analysis is used. If PAF is specified, then Principal Axis Factoring is
+used. By default Principal Components Analysis will be used.
+
+The /ROTATION subcommand is used to specify the method by which the extracted solution will be rotated.
+Three methods are available: VARIMAX (which is the default), EQUAMAX, and QUARTIMAX.
+If don't want any rotation to be performed, the word NOROTATE will prevent the command from performing any
+rotation on the data. Oblique rotations are not supported.
+
+The /METHOD subcommand should be used to determine whether the covariance matrix or the correlation matrix of the data is
+to be analysed. By default, the correlation matrix is analysed.
+
+The /PRINT subcommand may be used to select which features of the analysis are reported:
+
+@itemize
+@item UNIVARIATE
+ A table of mean values, standard deviations and total weights are printed.
+@item INITIAL
+ Initial communalities and eigenvalues are printed.
+@item EXTRACTION
+ Extracted communalities and eigenvalues are printed.
+@item ROTATION
+ Rotated communalities and eigenvalues are printed.
+@item CORRELATION
+ The correlation matrix is printed.
+@item COVARIANCE
+ The covariance matrix is printed.
+@item DET
+ The determinant of the correlation or covariance matrix is printed.
+@item SIG
+ The significance of the elements of correlation matrix is printed.
+@item ALL
+ All of the above are printed.
+@item DEFAULT
+ Identical to INITIAL and EXTRACTION.
+@end itemize
+
+If /PLOT=EIGEN is given, then a ``Scree'' plot of the eigenvalues will be printed. This can be useful for visualising
+which factors (components) should be retained.
+
+The /FORMAT subcommand determined how data are to be displayed in loading matrices. If SORT is specified, then the variables
+are sorted in descending order of significance. If BLANK(@var{n}) is specified, then coefficients whose absolute value is less
+than @var{n} will not be printed. If the keyword DEFAULT is given, or if no /FORMAT subcommand is given, then no sorting is
+performed, and all coefficients will be printed.
+
+The /CRITERIA subcommand is used to specify how the number of extracted factors (components) are chosen. If FACTORS(@var{n}) is
+specified, where @var{n} is an integer, then @var{n} factors will be extracted. Otherwise, the MINEIGEN setting will
+be used. MINEIGEN(@var{l}) requests that all factors whose eigenvalues are greater than or equal to @var{l} are extracted.
+The default value of @var{l} is 1. The ECONVERGE and ITERATE settings have effect only when iterative algorithms for factor
+extraction (such as Principal Axis Factoring) are used. ECONVERGE(@var{delta}) specifies that iteration should cease when
+the maximum absolute value of the communality estimate between one iteration and the previous is less than @var{delta}. The
+default value of @var{delta} is 0.001.
+The ITERATE(@var{m}) setting sets the maximum number of iterations to @var{m}. The default value of @var{m} is 25.
+
+The @cmd{MISSING} subcommand determines the handling of missing variables.
+If INCLUDE is set, then user-missing values are included in the
+calculations, but system-missing values are not.
+If EXCLUDE is set, which is the default, user-missing
+values are excluded as well as system-missing values.
+This is the default.
+If LISTWISE is set, then the entire case is excluded from analysis
+whenever any variable specified in the @cmd{VARIABLES} subcommand
+contains a missing value.
+If PAIRWISE is set, then a case is considered missing only if either of the
+values for the particular coefficient are missing.
+The default is LISTWISE.
+
+
+@node NPAR TESTS
+@section NPAR TESTS
+
+@vindex NPAR TESTS
+@cindex nonparametric tests
+
+@display
+NPAR TESTS
+
+ nonparametric test subcommands
+ .
+ .
+ .
+
+ [ /STATISTICS=@{DESCRIPTIVES@} ]
+
+ [ /MISSING=@{ANALYSIS, LISTWISE@} @{INCLUDE, EXCLUDE@} ]
+
+ [ /METHOD=EXACT [ TIMER [(n)] ] ]
+@end display
+
+NPAR TESTS performs nonparametric tests.
+Non parametric tests make very few assumptions about the distribution of the
+data.
+One or more tests may be specified by using the corresponding subcommand.
+If the /STATISTICS subcommand is also specified, then summary statistics are
+produces for each variable that is the subject of any test.
+
+Certain tests may take a long time to execute, if an exact figure is required.
+Therefore, by default asymptotic approximations are used unless the
+subcommand /METHOD=EXACT is specified.
+Exact tests give more accurate results, but may take an unacceptably long
+time to perform. If the TIMER keyword is used, it sets a maximum time,
+after which the test will be abandoned, and a warning message printed.
+The time, in minutes, should be specified in parentheses after the TIMER keyword.
+If the TIMER keyword is given without this figure, then a default value of 5 minutes
+is used.
+
+
+@menu
+* BINOMIAL:: Binomial Test
+* CHISQUARE:: Chisquare Test
+* WILCOXON:: Wilcoxon Signed Ranks Test
+* SIGN:: The Sign Test
+@end menu
+
+
+@node BINOMIAL
+@subsection Binomial test
+@vindex BINOMIAL
+@cindex binomial test
+
+@display
+ [ /BINOMIAL[(p)]=var_list[(value1[, value2)] ] ]
+@end display
+
+The /BINOMIAL subcommand compares the observed distribution of a dichotomous
+variable with that of a binomial distribution.
+The variable @var{p} specifies the test proportion of the binomial
+distribution.
+The default value of 0.5 is assumed if @var{p} is omitted.
+
+If a single value appears after the variable list, then that value is
+used as the threshold to partition the observed values. Values less
+than or equal to the threshold value form the first category. Values
+greater than the threshold form the second category.
+
+If two values appear after the variable list, then they will be used
+as the values which a variable must take to be in the respective
+category.
+Cases for which a variable takes a value equal to neither of the specified
+values, take no part in the test for that variable.
+
+If no values appear, then the variable must assume dichotomous
+values.
+If more than two distinct, non-missing values for a variable
+under test are encountered then an error occurs.
+
+If the test proportion is equal to 0.5, then a two tailed test is
+reported. For any other test proportion, a one tailed test is
+reported.
+For one tailed tests, if the test proportion is less than
+or equal to the observed proportion, then the significance of
+observing the observed proportion or more is reported.
+If the test proportion is more than the observed proportion, then the
+significance of observing the observed proportion or less is reported.
+That is to say, the test is always performed in the observed
+direction.
+
+PSPP uses a very precise approximation to the gamma function to
+compute the binomial significance. Thus, exact results are reported
+even for very large sample sizes.
+
+
+
+@node CHISQUARE
+@subsection Chisquare Test
+@vindex CHISQUARE
+@cindex chisquare test
+
+
+@display
+ [ /CHISQUARE=var_list[(lo,hi)] [/EXPECTED=@{EQUAL|f1, f2 @dots{} fn@}] ]
+@end display
+
+
+The /CHISQUARE subcommand produces a chi-square statistic for the differences
+between the expected and observed frequencies of the categories of a variable.
+Optionally, a range of values may appear after the variable list.
+If a range is given, then non integer values are truncated, and values
+outside the specified range are excluded from the analysis.
+
+The /EXPECTED subcommand specifies the expected values of each
+category.
+There must be exactly one non-zero expected value, for each observed
+category, or the EQUAL keywork must be specified.
+You may use the notation @var{n}*@var{f} to specify @var{n}
+consecutive expected categories all taking a frequency of @var{f}.
+The frequencies given are proportions, not absolute frequencies. The
+sum of the frequencies need not be 1.
+If no /EXPECTED subcommand is given, then then equal frequencies
+are expected.
+
+@node WILCOXON
+@subsection Wilcoxon Matched Pairs Signed Ranks Test
+@comment node-name, next, previous, up
+@vindex WILCOXON
+@cindex wilcoxon matched pairs signed ranks test
+
+@display
+ [ /WILCOXON varlist [ WITH varlist [ (PAIRED) ]]]
+@end display
+
+The /WILCOXON subcommand tests for differences between medians of the
+variables listed.
+The test does not make any assumptions about the variances of the samples.
+It does however assume that the distribution is symetrical.
+
+If the @code{WITH} keyword is omitted, then tests for all
+combinations of the listed variables are performed.
+If the @code{WITH} keyword is given, and the @code{(PAIRED)} keyword
+is also given, then the number of variables preceding @code{WITH}
+must be the same as the number following it.
+In this case, tests for each respective pair of variables are
+performed.
+If the @code{WITH} keyword is given, but the
+@code{(PAIRED)} keyword is omitted, then tests for each combination
+of variable preceding @code{WITH} against variable following
+@code{WITH} are performed.
+
+
+@node SIGN
+@subsection Sign Test
+@vindex SIGN
+@cindex sign test
+
+@display
+ [ /SIGN varlist [ WITH varlist [ (PAIRED) ]]]
+@end display
+
+The /SIGN subcommand tests for differences between medians of the
+variables listed.
+The test does not make any assumptions about the
+distribution of the data.
+
+If the @code{WITH} keyword is omitted, then tests for all
+combinations of the listed variables are performed.
+If the @code{WITH} keyword is given, and the @code{(PAIRED)} keyword
+is also given, then the number of variables preceding @code{WITH}
+must be the same as the number following it.
+In this case, tests for each respective pair of variables are
+performed.
+If the @code{WITH} keyword is given, but the
+@code{(PAIRED)} keyword is omitted, then tests for each combination
+of variable preceding @code{WITH} against variable following
+@code{WITH} are performed.
+
+@node T-TEST