Group: System Environment/Daemons
URL: http://www.openvswitch.org/
Version: %{vswitch_version}
-License: GPL3
+
+# The entire source code is ASL 2.0 except datapath/ which is GPLv2
+License: ASL 2.0 and GPLv2
Release: 1
Source: openvswitch-%{vswitch_version}.tar.gz
Buildroot: /tmp/vswitch-xen-rpm
Requires: kernel-xen = %(echo '%{xen_version}' | sed 's/xen$//')
+# The following Conflicts prevents the "vswitch" package generated by
+# this spec file from installing at the same time as the "openvswitch"
+# package shipped with XenServer 5.5.900. In fact, the packages
+# contain some files with identical names anyhow, so they will not
+# coexist, but adding an explicit Conflicts makes this conflict more
+# obvious.
+Conflicts: openvswitch
%description
The vswitch provides standard network bridging functions augmented with
install -m 755 xenserver/etc_init.d_vswitch-xapi-update \
$RPM_BUILD_ROOT/etc/init.d/vswitch-xapi-update
install -d -m 755 $RPM_BUILD_ROOT/etc/sysconfig
-install -m 755 xenserver/etc_sysconfig_vswitch.example \
- $RPM_BUILD_ROOT/etc/sysconfig/vswitch.example
install -d -m 755 $RPM_BUILD_ROOT/etc/logrotate.d
install -m 755 xenserver/etc_logrotate.d_vswitch \
$RPM_BUILD_ROOT/etc/logrotate.d/vswitch
$RPM_BUILD_ROOT%{_prefix}/scripts/vif
install -m 755 xenserver/root_vswitch_scripts_dump-vif-details \
$RPM_BUILD_ROOT%{_prefix}/scripts/dump-vif-details
-install -m 755 \
+install -m 755 xenserver/usr_sbin_xen-bugtool \
+ $RPM_BUILD_ROOT%{_prefix}/scripts/xen-bugtool
+install -m 755 xenserver/usr_sbin_brctl \
+ $RPM_BUILD_ROOT%{_prefix}/scripts/brctl
+install -m 755 xenserver/root_vswitch_scripts_sysconfig.template \
+ $RPM_BUILD_ROOT/root/vswitch/scripts/sysconfig.template
+install -m 644 \
xenserver/usr_lib_xsconsole_plugins-base_XSFeatureVSwitch.py \
$RPM_BUILD_ROOT%{_prefix}/scripts/XSFeatureVSwitch.py
$RPM_BUILD_ROOT/root/vswitch/bin/ovs-controller \
$RPM_BUILD_ROOT/root/vswitch/bin/ovs-discover \
$RPM_BUILD_ROOT/root/vswitch/bin/ovs-kill \
+ $RPM_BUILD_ROOT/root/vswitch/bin/ovs-openflowd \
$RPM_BUILD_ROOT/root/vswitch/bin/ovs-pki \
$RPM_BUILD_ROOT/root/vswitch/bin/ovs-switchui \
$RPM_BUILD_ROOT/root/vswitch/bin/ovs-wdt \
- $RPM_BUILD_ROOT/root/vswitch/bin/secchan \
$RPM_BUILD_ROOT/root/vswitch/kernel_modules/veth_mod.ko \
$RPM_BUILD_ROOT/root/vswitch/sbin/ovs-monitor \
$RPM_BUILD_ROOT/root/vswitch/share/man/man8/ovs-controller.8 \
$RPM_BUILD_ROOT/root/vswitch/share/man/man8/ovs-discover.8 \
$RPM_BUILD_ROOT/root/vswitch/share/man/man8/ovs-kill.8 \
+ $RPM_BUILD_ROOT/root/vswitch/share/man/man8/ovs-openflowd.8 \
$RPM_BUILD_ROOT/root/vswitch/share/man/man8/ovs-pki.8 \
- $RPM_BUILD_ROOT/root/vswitch/share/man/man8/secchan.8 \
$RPM_BUILD_ROOT/root/vswitch/share/openvswitch
%clean
fi
if [ "$1" = "1" ]; then
- if ! md5sum -c --status <<EOF
+ if md5sum -c --status <<EOF
+ca141d60061dcfdade73e75abc6529b5 /usr/sbin/brctl
b8e9835862ef1a9cec2a3f477d26c989 /etc/xensource/scripts/vif
51970ad613a3996d5997e18e44db47da /opt/xensource/libexec/interface-reconfigure
+5654c8c36699fcc8744ca9cd5b855414 /usr/sbin/xen-bugtool
EOF
then
- printf "\nThe original XenServer scripts replaced by this package\n"
- printf "are different than expected. This could lead to unexpected\n"
- printf "behavior of your server. Unless you are sure you know what\n"
- printf "you are doing, it is highly recomended that you remove this\n"
- printf "package immediately after the install completes, which\n"
- printf "will restore the XenServer scripts that you were previously\n"
- printf "using.\n\n"
+ printf "\nVerified host scripts from XenServer 5.5.0.\n\n"
+ elif md5sum -c --status <<EOF
+ca141d60061dcfdade73e75abc6529b5 /usr/sbin/brctl
+b8e9835862ef1a9cec2a3f477d26c989 /etc/xensource/scripts/vif
+ce451d3c985fd1db6497a363f0d9dedb /opt/xensource/libexec/interface-reconfigure
+2b53f500431fcba5276c896e9e4281b9 /usr/sbin/xen-bugtool
+EOF
+ printf "\nVerified host scripts from XenServer 5.5.900.\n\n"
+ else
+cat <<EOF
+
+The original XenServer scripts replaced by this package are not those
+of any supported version of XenServer. This could lead to unexpected
+behavior of your server. Unless you are sure you know what you are
+doing, it is highly recommended that you remove this package
+immediately after the install completes, which will restore the
+XenServer scripts that you were previously using.
+
+EOF
fi
fi
fi
%post
-source /etc/xensource-inventory
-
-xe host-param-set \
- "other-config:vSwitchVersion=%{version}" uuid="$INSTALLATION_UUID" ||
- echo "Could not set vSwitchVersion config parameter"
+if grep -F net.ipv4.conf.all.arp_filter /etc/sysctl.conf >/dev/null 2>&1; then :; else
+ cat >>/etc/sysctl.conf <<EOF
+# This works around an issue in xhad, which binds to a particular
+# Ethernet device, which in turn causes ICMP port unreachable messages
+# if packets are received are on the wrong interface, which in turn
+# can happen if we send out ARP replies on every interface (as Linux
+# does by default) instead of just on the interface that has the IP
+# address being ARPed for, which this sysctl setting in turn works
+# around.
+#
+# Bug #1378.
+net.ipv4.conf.all.arp_filter = 1
+EOF
+fi
# Ensure ovs-vswitchd.conf exists
touch /etc/ovs-vswitchd.conf
-# Replace original XenServer files
+# Create default or update existing /etc/sysconfig/vswitch.
+SYSCONFIG=/etc/sysconfig/vswitch
+TEMPLATE=/root/vswitch/scripts/sysconfig.template
+if [ ! -e $SYSCONFIG ]; then
+ cp $TEMPLATE $SYSCONFIG
+else
+ for var in $(awk -F'[ :]' '/^# [_A-Z0-9]+:/{print $2}' $TEMPLATE)
+ do
+ if ! grep $var $SYSCONFIG >/dev/null 2>&1; then
+ echo >> $SYSCONFIG
+ sed -n "/$var:/,/$var=/p" $TEMPLATE >> $SYSCONFIG
+ fi
+ done
+fi
+
+# Replace XenServer files by our versions.
mkdir -p %{_prefix}/xs-original \
|| printf "Could not create script backup directory.\n"
for f in \
/opt/xensource/libexec/interface-reconfigure \
- /etc/xensource/scripts/vif
+ /etc/xensource/scripts/vif \
+ /usr/sbin/xen-bugtool \
+ /usr/sbin/brctl
do
s=$(basename "$f")
t=$(readlink "$f")
# Restore original XenServer scripts
for f in \
/opt/xensource/libexec/interface-reconfigure \
- /etc/xensource/scripts/vif
+ /etc/xensource/scripts/vif \
+ /usr/sbin/xen-bugtool \
+ /usr/sbin/brctl
do
s=$(basename "$f")
if [ ! -f "%{_prefix}/xs-original/$s" ]; then
find %{_prefix} -type d -depth -exec rmdir \{\} \; \
|| printf "Could not remove vSwitch install directory.\n"
- # Remove all configuration and log files
+ # Remove all configuration files
rm -f /etc/ovs-vswitchd.conf
rm -f /etc/sysconfig/vswitch
- rm -f /var/log/vswitch*
rm -f /etc/ovs-vswitchd.cacert
- if [ ! -f /etc/xensource-inventory ]; then
- printf "XenSource inventory not present in /etc/xensource-inventory\n"
- printf "Could not remove vSwitchVersion from XAPI database.\n"
- exit 1
- else
- source /etc/xensource-inventory
- xe host-param-remove \
- param-name=other-config param-key=vSwitchVersion \
- uuid="$INSTALLATION_UUID" ||
- echo "Could not clear vSwitchVersion config parameter."
- fi
-
printf "\nYou MUST reboot the server now to complete the change to\n"
printf "standard Xen networking. Attempts to modify networking on the\n"
printf "server or any hosted VM will fail until after the reboot and\n"
/etc/init.d/vswitch
/etc/init.d/vswitch-xapi-update
/etc/xapi.d/plugins/vswitch-cfg-update
-/etc/sysconfig/vswitch.example
/etc/logrotate.d/vswitch
/etc/profile.d/vswitch.sh
/root/vswitch/kernel_modules/brcompat_mod.ko
/root/vswitch/scripts/dump-vif-details
/root/vswitch/scripts/interface-reconfigure
/root/vswitch/scripts/vif
+/root/vswitch/scripts/xen-bugtool
/root/vswitch/scripts/XSFeatureVSwitch.py
+/root/vswitch/scripts/brctl
+/root/vswitch/scripts/sysconfig.template
# Following two files are generated automatically by rpm. We don't
# really need them and they won't be used on the XenServer, but there
# isn't an obvious place to get rid of them since they are generated