1 # Spec file for vswitch and related programs.
3 # Copyright (C) 2009 Nicira Networks, Inc.
5 # Copying and distribution of this file, with or without modification,
6 # are permitted in any medium without royalty provided the copyright
7 # notice and this notice are preserved. This file is offered as-is,
8 # without warranty of any kind.
10 # When building, the rpmbuild command line should define
11 # vswitch_version, xen_version, and build_number using -D arguments.
14 # rpmbuild -D "vswitch_version 0.8.9~1+build123" -D "xen_version 2.6.18-128.1.1.el5.xs5.1.0.483.1000xen" -D "build_number --with-build-number=123" -bb /usr/src/redhat/SPECS/vswitch-xen.spec
16 %define version %{vswitch_version}-%{xen_version}
17 %define _prefix /root/vswitch
20 Summary: Virtual switch
21 Group: System Environment/Daemons
22 URL: http://www.openvswitch.org/
23 Version: %{vswitch_version}
25 # The entire source code is ASL 2.0 except datapath/ which is GPLv2
26 License: ASL 2.0 and GPLv2
28 Source: openvswitch-%{vswitch_version}.tar.gz
29 Buildroot: /tmp/vswitch-xen-rpm
30 Requires: kernel-xen = %(echo '%{xen_version}' | sed 's/xen$//')
33 The vswitch provides standard network bridging functions augmented with
34 support for the OpenFlow protocol for remote per-flow control of
38 %setup -q -n openvswitch-%{vswitch_version}
41 ./configure --prefix=%{_prefix} --localstatedir=%{_localstatedir} --with-l26=/lib/modules/%{xen_version}/build --enable-ssl %{build_number}
45 rm -rf $RPM_BUILD_ROOT
46 make install DESTDIR=$RPM_BUILD_ROOT prefix=%{_prefix}
47 install -d -m 755 $RPM_BUILD_ROOT/etc
48 install -d -m 755 $RPM_BUILD_ROOT/etc/init.d
49 install -m 755 xenserver/etc_init.d_vswitch \
50 $RPM_BUILD_ROOT/etc/init.d/vswitch
51 install -m 755 xenserver/etc_init.d_vswitch-xapi-update \
52 $RPM_BUILD_ROOT/etc/init.d/vswitch-xapi-update
53 install -d -m 755 $RPM_BUILD_ROOT/etc/sysconfig
54 install -d -m 755 $RPM_BUILD_ROOT/etc/logrotate.d
55 install -m 755 xenserver/etc_logrotate.d_vswitch \
56 $RPM_BUILD_ROOT/etc/logrotate.d/vswitch
57 install -d -m 755 $RPM_BUILD_ROOT/etc/profile.d
58 install -m 755 xenserver/etc_profile.d_vswitch.sh \
59 $RPM_BUILD_ROOT/etc/profile.d/vswitch.sh
60 install -d -m 755 $RPM_BUILD_ROOT/etc/xapi.d/plugins
61 install -m 755 xenserver/etc_xapi.d_plugins_vswitch-cfg-update \
62 $RPM_BUILD_ROOT/etc/xapi.d/plugins/vswitch-cfg-update
63 install -d -m 755 $RPM_BUILD_ROOT%{_prefix}/scripts
64 install -m 755 xenserver/opt_xensource_libexec_interface-reconfigure \
65 $RPM_BUILD_ROOT%{_prefix}/scripts/interface-reconfigure
66 install -m 755 xenserver/etc_xensource_scripts_vif \
67 $RPM_BUILD_ROOT%{_prefix}/scripts/vif
68 install -m 755 xenserver/root_vswitch_scripts_dump-vif-details \
69 $RPM_BUILD_ROOT%{_prefix}/scripts/dump-vif-details
70 install -m 755 xenserver/usr_sbin_xen-bugtool \
71 $RPM_BUILD_ROOT%{_prefix}/scripts/xen-bugtool
72 install -m 755 xenserver/usr_sbin_brctl \
73 $RPM_BUILD_ROOT%{_prefix}/scripts/brctl
74 install -m 755 xenserver/root_vswitch_scripts_sysconfig.template \
75 $RPM_BUILD_ROOT/root/vswitch/scripts/sysconfig.template
77 xenserver/usr_lib_xsconsole_plugins-base_XSFeatureVSwitch.py \
78 $RPM_BUILD_ROOT%{_prefix}/scripts/XSFeatureVSwitch.py
80 install -d -m 755 $RPM_BUILD_ROOT%{_prefix}/kernel_modules
81 find datapath/linux-2.6 -name *.ko -exec install -m 755 \{\} $RPM_BUILD_ROOT%{_prefix}/kernel_modules/ \;
83 # Get rid of stuff we don't want to make RPM happy.
85 $RPM_BUILD_ROOT/root/vswitch/bin/ezio-term \
86 $RPM_BUILD_ROOT/root/vswitch/bin/ovs-controller \
87 $RPM_BUILD_ROOT/root/vswitch/bin/ovs-discover \
88 $RPM_BUILD_ROOT/root/vswitch/bin/ovs-kill \
89 $RPM_BUILD_ROOT/root/vswitch/bin/ovs-openflowd \
90 $RPM_BUILD_ROOT/root/vswitch/bin/ovs-pki \
91 $RPM_BUILD_ROOT/root/vswitch/bin/ovs-switchui \
92 $RPM_BUILD_ROOT/root/vswitch/bin/ovs-wdt \
93 $RPM_BUILD_ROOT/root/vswitch/kernel_modules/veth_mod.ko \
94 $RPM_BUILD_ROOT/root/vswitch/sbin/ovs-monitor \
95 $RPM_BUILD_ROOT/root/vswitch/share/man/man8/ovs-controller.8 \
96 $RPM_BUILD_ROOT/root/vswitch/share/man/man8/ovs-discover.8 \
97 $RPM_BUILD_ROOT/root/vswitch/share/man/man8/ovs-kill.8 \
98 $RPM_BUILD_ROOT/root/vswitch/share/man/man8/ovs-openflowd.8 \
99 $RPM_BUILD_ROOT/root/vswitch/share/man/man8/ovs-pki.8 \
100 $RPM_BUILD_ROOT/root/vswitch/share/openvswitch
103 rm -rf $RPM_BUILD_ROOT
106 if [ ! -f /etc/xensource-inventory ]; then
107 printf "XenSource inventory not present in /etc/xensource-inventory"
111 if [ "$1" = "1" ]; then
112 if md5sum -c --status <<EOF
113 ca141d60061dcfdade73e75abc6529b5 /usr/sbin/brctl
114 b8e9835862ef1a9cec2a3f477d26c989 /etc/xensource/scripts/vif
115 51970ad613a3996d5997e18e44db47da /opt/xensource/libexec/interface-reconfigure
116 5654c8c36699fcc8744ca9cd5b855414 /usr/sbin/xen-bugtool
119 printf "\nVerified host scripts from XenServer 5.5.0.\n\n"
120 elif md5sum -c --status <<EOF
121 ca141d60061dcfdade73e75abc6529b5 /usr/sbin/brctl
122 b8e9835862ef1a9cec2a3f477d26c989 /etc/xensource/scripts/vif
123 ce451d3c985fd1db6497a363f0d9dedb /opt/xensource/libexec/interface-reconfigure
124 2b53f500431fcba5276c896e9e4281b9 /usr/sbin/xen-bugtool
126 printf "\nVerified host scripts from XenServer 5.5.900.\n\n"
130 The original XenServer scripts replaced by this package are not those
131 of any supported version of XenServer. This could lead to unexpected
132 behavior of your server. Unless you are sure you know what you are
133 doing, it is highly recommended that you remove this package
134 immediately after the install completes, which will restore the
135 XenServer scripts that you were previously using.
141 if test ! -e /etc/ovs-vswitch.dbcache; then
142 if test "$1" = 1; then
143 printf "Creating xapi database cache... "
145 printf "warning: Open vSwitch is being re-installed or upgraded,\n"
146 printf " but the xapi database cache is missing.\n"
147 printf "Re-creating xapi database cache... "
150 source /etc/xensource-inventory
151 if python - "$INSTALLATION_UUID" <<EOF
156 session = XenAPI.xapi_local()
158 session.xenapi.login_with_password("root", "")
160 vlans = session.xenapi.VLAN.get_all_records()
161 bonds = session.xenapi.Bond.get_all_records()
162 pifs = session.xenapi.PIF.get_all_records()
163 networks = session.xenapi.network.get_all_records()
164 host = session.xenapi.host.get_by_uuid(sys.argv[1])
166 session.xenapi.session.logout()
168 dbcache_file = "/etc/ovs-vswitch.dbcache"
169 f = open(dbcache_file, 'w')
170 pickle.dump({'vlans': vlans,
173 'networks': networks}, f)
174 pickle.dump({'host': host}, f)
181 printf "Open vSwitch can only be installed on a XenServer that\n"
182 printf "has connectivity to xapi on the pool master. Please\n"
183 printf "fix connectivity to the pool master, then try again.\n"
189 if grep -F net.ipv4.conf.all.arp_filter /etc/sysctl.conf >/dev/null 2>&1; then :; else
190 cat >>/etc/sysctl.conf <<EOF
191 # This works around an issue in xhad, which binds to a particular
192 # Ethernet device, which in turn causes ICMP port unreachable messages
193 # if packets are received are on the wrong interface, which in turn
194 # can happen if we send out ARP replies on every interface (as Linux
195 # does by default) instead of just on the interface that has the IP
196 # address being ARPed for, which this sysctl setting in turn works
200 net.ipv4.conf.all.arp_filter = 1
204 # Ensure ovs-vswitchd.conf exists
205 touch /etc/ovs-vswitchd.conf
207 # Create default or update existing /etc/sysconfig/vswitch.
208 SYSCONFIG=/etc/sysconfig/vswitch
209 TEMPLATE=/root/vswitch/scripts/sysconfig.template
210 if [ ! -e $SYSCONFIG ]; then
211 cp $TEMPLATE $SYSCONFIG
213 for var in $(awk -F'[ :]' '/^# [_A-Z0-9]+:/{print $2}' $TEMPLATE)
215 if ! grep $var $SYSCONFIG >/dev/null 2>&1; then
217 sed -n "/$var:/,/$var=/p" $TEMPLATE >> $SYSCONFIG
222 # Replace XenServer files by our versions.
223 mkdir -p %{_prefix}/xs-original \
224 || printf "Could not create script backup directory.\n"
226 /opt/xensource/libexec/interface-reconfigure \
227 /etc/xensource/scripts/vif \
228 /usr/sbin/xen-bugtool \
233 if [ "$t" != "%{_prefix}/scripts/$s" ]; then
234 mv "$f" %{_prefix}/xs-original/ \
235 || printf "Could not save original XenServer $s script\n"
236 ln -s "%{_prefix}/scripts/$s" "$f" \
237 || printf "Could not link to vSwitch $s script\n"
241 # Install xsconsole plugin
242 plugin=$(readlink /usr/lib/xsconsole/plugins-base/XSFeatureVSwitch.py)
243 if [ "$plugin" != "/root/vswitch/scripts/XSFeatureVSwitch.py" ]; then
244 rm -f /usr/lib/xsconsole/plugins-base/XSFeatureVSwitch.py
245 ln -s /root/vswitch/scripts/XSFeatureVSwitch.py /usr/lib/xsconsole/plugins-base/ || printf "Could not link to vSswitch xsconsole plugin.\n"
248 # Ensure all required services are set to run
249 for s in vswitch vswitch-xapi-update; do
250 if chkconfig --list $s >/dev/null 2>&1; then
251 chkconfig --del $s || printf "Could not remove $s init script."
253 chkconfig --add $s || printf "Could not add $s init script."
254 chkconfig $s on || printf "Could not enable $s init script."
257 if [ "$1" = "1" ]; then # $1 = 2 for upgrade
258 printf "\nYou MUST reboot the server NOW to complete the change to the\n"
259 printf "the vSwitch. Attempts to modify networking on the server\n"
260 printf "or any hosted VM will fail until after the reboot and could\n"
261 printf "leave the server in an state requiring manual recovery.\n\n"
263 printf "\nTo use the new vSwitch, you should reboot the server\n"
264 printf "now. Failure to do so may result in incorrect operation.\n\n"
268 if [ "$1" = "0" ]; then # $1 = 1 for upgrade
269 for s in vswitch vswitch-xapi-update; do
270 chkconfig --del $s || printf "Could not remove $s init script."
276 if [ "$1" = "0" ]; then # $1 = 1 for upgrade
278 rm -f /usr/lib/xsconsole/plugins-base/XSFeatureVSwitch.py \
279 /usr/lib/xsconsole/plugins-base/XSFeatureVSwitch.pyc \
280 /usr/lib/xsconsole/plugins-base/XSFeatureVSwitch.pyo \
281 || printf "Could not remove vSwitch xsconsole plugin.\n"
283 # Restore original XenServer scripts
285 /opt/xensource/libexec/interface-reconfigure \
286 /etc/xensource/scripts/vif \
287 /usr/sbin/xen-bugtool \
291 if [ ! -f "%{_prefix}/xs-original/$s" ]; then
292 printf "Original XenServer $s script not present in %{_prefix}/xs-original\n"
293 printf "Could not restore original XenServer script.\n"
296 && mv "%{_prefix}/xs-original/$s" "$f") \
297 || printf "Could not restore original XenServer $s script.\n"
301 find %{_prefix} -type d -depth -exec rmdir \{\} \; \
302 || printf "Could not remove vSwitch install directory.\n"
304 # Remove all configuration and log files
305 rm -f /etc/ovs-vswitchd.conf
306 rm -f /etc/sysconfig/vswitch
307 rm -f /var/log/vswitch*
308 rm -f /etc/ovs-vswitchd.cacert
310 printf "\nYou MUST reboot the server now to complete the change to\n"
311 printf "standard Xen networking. Attempts to modify networking on the\n"
312 printf "server or any hosted VM will fail until after the reboot and\n"
313 printf "could leave the server in a state requiring manual recovery.\n\n"
318 %defattr(-,root,root)
320 /etc/init.d/vswitch-xapi-update
321 /etc/xapi.d/plugins/vswitch-cfg-update
322 /etc/logrotate.d/vswitch
323 /etc/profile.d/vswitch.sh
324 /root/vswitch/kernel_modules/brcompat_mod.ko
325 /root/vswitch/kernel_modules/openvswitch_mod.ko
326 /root/vswitch/scripts/dump-vif-details
327 /root/vswitch/scripts/interface-reconfigure
328 /root/vswitch/scripts/vif
329 /root/vswitch/scripts/xen-bugtool
330 /root/vswitch/scripts/XSFeatureVSwitch.py
331 /root/vswitch/scripts/brctl
332 /root/vswitch/scripts/sysconfig.template
333 # Following two files are generated automatically by rpm. We don't
334 # really need them and they won't be used on the XenServer, but there
335 # isn't an obvious place to get rid of them since they are generated
336 # after the install script runs. Since they are small, we just
338 /root/vswitch/scripts/XSFeatureVSwitch.pyc
339 /root/vswitch/scripts/XSFeatureVSwitch.pyo
340 /root/vswitch/sbin/ovs-brcompatd
341 /root/vswitch/sbin/ovs-vswitchd
342 /root/vswitch/bin/ovs-appctl
343 /root/vswitch/bin/ovs-cfg-mod
344 /root/vswitch/bin/ovs-dpctl
345 /root/vswitch/bin/ovs-ofctl
346 /root/vswitch/share/man/man5/ovs-vswitchd.conf.5
347 /root/vswitch/share/man/man8/ovs-appctl.8
348 /root/vswitch/share/man/man8/ovs-brcompatd.8
349 /root/vswitch/share/man/man8/ovs-cfg-mod.8
350 /root/vswitch/share/man/man8/ovs-dpctl.8
351 /root/vswitch/share/man/man8/ovs-ofctl.8
352 /root/vswitch/share/man/man8/ovs-vswitchd.8