1 # Spec file for vswitch and related programs.
3 # Copyright (C) 2009 Nicira Networks, Inc.
5 # Copying and distribution of this file, with or without modification,
6 # are permitted in any medium without royalty provided the copyright
7 # notice and this notice are preserved. This file is offered as-is,
8 # without warranty of any kind.
10 # When building, the rpmbuild command line should define
11 # vswitch_version, xen_version, and build_number using -D arguments.
14 # rpmbuild -D "vswitch_version 0.8.9~1+build123" -D "xen_version 2.6.18-128.1.1.el5.xs5.1.0.483.1000xen" -D "build_number --with-build-number=123" -bb /usr/src/redhat/SPECS/vswitch-xen.spec
16 %define version %{vswitch_version}-%{xen_version}
17 %define _prefix /root/vswitch
20 Summary: Virtual switch
21 Group: System Environment/Daemons
22 URL: http://www.openvswitch.org/
23 Version: %{vswitch_version}
25 # The entire source code is ASL 2.0 except datapath/ which is GPLv2
26 License: ASL 2.0 and GPLv2
28 Source: openvswitch-%{vswitch_version}.tar.gz
29 Buildroot: /tmp/vswitch-xen-rpm
30 Requires: kernel-xen = %(echo '%{xen_version}' | sed 's/xen$//')
33 The vswitch provides standard network bridging functions augmented with
34 support for the OpenFlow protocol for remote per-flow control of
38 %setup -q -n openvswitch-%{vswitch_version}
41 ./configure --prefix=%{_prefix} --localstatedir=%{_localstatedir} --with-l26=/lib/modules/%{xen_version}/build --enable-ssl %{build_number}
45 rm -rf $RPM_BUILD_ROOT
46 make install DESTDIR=$RPM_BUILD_ROOT prefix=%{_prefix}
47 install -d -m 755 $RPM_BUILD_ROOT/etc
48 install -d -m 755 $RPM_BUILD_ROOT/etc/init.d
49 install -m 755 xenserver/etc_init.d_vswitch \
50 $RPM_BUILD_ROOT/etc/init.d/vswitch
51 install -m 755 xenserver/etc_init.d_vswitch-xapi-update \
52 $RPM_BUILD_ROOT/etc/init.d/vswitch-xapi-update
53 install -d -m 755 $RPM_BUILD_ROOT/etc/sysconfig
54 install -m 755 xenserver/etc_sysconfig_vswitch.example \
55 $RPM_BUILD_ROOT/etc/sysconfig/vswitch.example
56 install -d -m 755 $RPM_BUILD_ROOT/etc/logrotate.d
57 install -m 755 xenserver/etc_logrotate.d_vswitch \
58 $RPM_BUILD_ROOT/etc/logrotate.d/vswitch
59 install -d -m 755 $RPM_BUILD_ROOT/etc/profile.d
60 install -m 755 xenserver/etc_profile.d_vswitch.sh \
61 $RPM_BUILD_ROOT/etc/profile.d/vswitch.sh
62 install -d -m 755 $RPM_BUILD_ROOT/etc/xapi.d/plugins
63 install -m 755 xenserver/etc_xapi.d_plugins_vswitch-cfg-update \
64 $RPM_BUILD_ROOT/etc/xapi.d/plugins/vswitch-cfg-update
65 install -d -m 755 $RPM_BUILD_ROOT%{_prefix}/scripts
66 install -m 755 xenserver/opt_xensource_libexec_interface-reconfigure \
67 $RPM_BUILD_ROOT%{_prefix}/scripts/interface-reconfigure
68 install -m 755 xenserver/etc_xensource_scripts_vif \
69 $RPM_BUILD_ROOT%{_prefix}/scripts/vif
70 install -m 755 xenserver/root_vswitch_scripts_dump-vif-details \
71 $RPM_BUILD_ROOT%{_prefix}/scripts/dump-vif-details
72 install -m 755 xenserver/usr_sbin_xen-bugtool \
73 $RPM_BUILD_ROOT%{_prefix}/scripts/xen-bugtool
74 install -m 755 xenserver/usr_sbin_brctl \
75 $RPM_BUILD_ROOT%{_prefix}/scripts/brctl
77 xenserver/usr_lib_xsconsole_plugins-base_XSFeatureVSwitch.py \
78 $RPM_BUILD_ROOT%{_prefix}/scripts/XSFeatureVSwitch.py
80 install -d -m 755 $RPM_BUILD_ROOT%{_prefix}/kernel_modules
81 find datapath/linux-2.6 -name *.ko -exec install -m 755 \{\} $RPM_BUILD_ROOT%{_prefix}/kernel_modules/ \;
83 # Get rid of stuff we don't want to make RPM happy.
85 $RPM_BUILD_ROOT/root/vswitch/bin/ezio-term \
86 $RPM_BUILD_ROOT/root/vswitch/bin/ovs-controller \
87 $RPM_BUILD_ROOT/root/vswitch/bin/ovs-discover \
88 $RPM_BUILD_ROOT/root/vswitch/bin/ovs-kill \
89 $RPM_BUILD_ROOT/root/vswitch/bin/ovs-pki \
90 $RPM_BUILD_ROOT/root/vswitch/bin/ovs-switchui \
91 $RPM_BUILD_ROOT/root/vswitch/bin/ovs-wdt \
92 $RPM_BUILD_ROOT/root/vswitch/bin/secchan \
93 $RPM_BUILD_ROOT/root/vswitch/sbin/ovs-monitor \
94 $RPM_BUILD_ROOT/root/vswitch/share/man/man8/ovs-controller.8 \
95 $RPM_BUILD_ROOT/root/vswitch/share/man/man8/ovs-discover.8 \
96 $RPM_BUILD_ROOT/root/vswitch/share/man/man8/ovs-kill.8 \
97 $RPM_BUILD_ROOT/root/vswitch/share/man/man8/ovs-pki.8 \
98 $RPM_BUILD_ROOT/root/vswitch/share/man/man8/secchan.8 \
99 $RPM_BUILD_ROOT/root/vswitch/share/openvswitch
102 rm -rf $RPM_BUILD_ROOT
105 if [ ! -f /etc/xensource-inventory ]; then
106 printf "XenSource inventory not present in /etc/xensource-inventory"
110 if [ "$1" = "1" ]; then
111 if ! md5sum -c --status <<EOF
112 b8e9835862ef1a9cec2a3f477d26c989 /etc/xensource/scripts/vif
113 51970ad613a3996d5997e18e44db47da /opt/xensource/libexec/interface-reconfigure
114 5654c8c36699fcc8744ca9cd5b855414 /usr/sbin/xen-bugtool
117 printf "\nThe original XenServer scripts replaced by this package\n"
118 printf "are different than expected. This could lead to unexpected\n"
119 printf "behavior of your server. Unless you are sure you know what\n"
120 printf "you are doing, it is highly recommended that you remove this\n"
121 printf "package immediately after the install completes, which\n"
122 printf "will restore the XenServer scripts that you were previously\n"
125 if test "`/usr/sbin/brctl --version`" != "bridge-utils, 1.1"; then
128 /usr/sbin/brctl replaced by this package reports the following version:
130 `/usr/sbin/brctl --version`
132 The expected version was:
136 Unless you are sure you know what you are doing, it is highly recommended that
137 you remove this package immediately after the install completes, which will
138 restore the original /usr/sbin/brctl.
144 if test ! -e /etc/ovs-vswitch.dbcache; then
145 if test "$1" = 1; then
146 printf "Creating xapi database cache... "
148 printf "warning: Open vSwitch is being re-installed or upgraded,\n"
149 printf " but the xapi database cache is missing.\n"
150 printf "Re-creating xapi database cache... "
153 source /etc/xensource-inventory
154 if python - "$INSTALLATION_UUID" <<EOF
159 session = XenAPI.xapi_local()
161 session.xenapi.login_with_password("root", "")
163 vlans = session.xenapi.VLAN.get_all_records()
164 bonds = session.xenapi.Bond.get_all_records()
165 pifs = session.xenapi.PIF.get_all_records()
166 networks = session.xenapi.network.get_all_records()
167 host = session.xenapi.host.get_by_uuid(sys.argv[1])
169 session.xenapi.session.logout()
171 dbcache_file = "/etc/ovs-vswitch.dbcache"
172 f = open(dbcache_file, 'w')
173 pickle.dump({'vlans': vlans,
176 'networks': networks}, f)
177 pickle.dump({'host': host}, f)
184 printf "Open vSwitch can only be installed on a XenServer that\n"
185 printf "has connectivity to xapi on the pool master. Please\n"
186 printf "fix connectivity to the pool master, then try again.\n"
192 if grep -F net.ipv4.conf.all.arp_filter /etc/sysctl.conf >/dev/null 2>&1; then :; else
193 cat >>/etc/sysctl.conf <<EOF
194 # This works around an issue in xhad, which binds to a particular
195 # Ethernet device, which in turn causes ICMP port unreachable messages
196 # if packets are received are on the wrong interface, which in turn
197 # can happen if we send out ARP replies on every interface (as Linux
198 # does by default) instead of just on the interface that has the IP
199 # address being ARPed for, which this sysctl setting in turn works
203 net.ipv4.conf.all.arp_filter = 1
207 # Ensure ovs-vswitchd.conf exists
208 touch /etc/ovs-vswitchd.conf
210 # Replace XenServer files by our versions.
211 mkdir -p %{_prefix}/xs-original \
212 || printf "Could not create script backup directory.\n"
214 /opt/xensource/libexec/interface-reconfigure \
215 /etc/xensource/scripts/vif \
216 /usr/sbin/xen-bugtool \
221 if [ "$t" != "%{_prefix}/scripts/$s" ]; then
222 mv "$f" %{_prefix}/xs-original/ \
223 || printf "Could not save original XenServer $s script\n"
224 ln -s "%{_prefix}/scripts/$s" "$f" \
225 || printf "Could not link to vSwitch $s script\n"
229 # Install xsconsole plugin
230 plugin=$(readlink /usr/lib/xsconsole/plugins-base/XSFeatureVSwitch.py)
231 if [ "$plugin" != "/root/vswitch/scripts/XSFeatureVSwitch.py" ]; then
232 rm -f /usr/lib/xsconsole/plugins-base/XSFeatureVSwitch.py
233 ln -s /root/vswitch/scripts/XSFeatureVSwitch.py /usr/lib/xsconsole/plugins-base/ || printf "Could not link to vSswitch xsconsole plugin.\n"
236 # Ensure all required services are set to run
237 for s in vswitch vswitch-xapi-update; do
238 if chkconfig --list $s >/dev/null 2>&1; then
239 chkconfig --del $s || printf "Could not remove $s init script."
241 chkconfig --add $s || printf "Could not add $s init script."
242 chkconfig $s on || printf "Could not enable $s init script."
245 if [ "$1" = "1" ]; then # $1 = 2 for upgrade
246 printf "\nYou MUST reboot the server NOW to complete the change to the\n"
247 printf "the vSwitch. Attempts to modify networking on the server\n"
248 printf "or any hosted VM will fail until after the reboot and could\n"
249 printf "leave the server in an state requiring manual recovery.\n\n"
251 printf "\nTo use the new vSwitch, you should reboot the server\n"
252 printf "now. Failure to do so may result in incorrect operation.\n\n"
256 if [ "$1" = "0" ]; then # $1 = 1 for upgrade
257 for s in vswitch vswitch-xapi-update; do
258 chkconfig --del $s || printf "Could not remove $s init script."
264 if [ "$1" = "0" ]; then # $1 = 1 for upgrade
266 rm -f /usr/lib/xsconsole/plugins-base/XSFeatureVSwitch.py \
267 /usr/lib/xsconsole/plugins-base/XSFeatureVSwitch.pyc \
268 /usr/lib/xsconsole/plugins-base/XSFeatureVSwitch.pyo \
269 || printf "Could not remove vSwitch xsconsole plugin.\n"
271 # Restore original XenServer scripts
273 /opt/xensource/libexec/interface-reconfigure \
274 /etc/xensource/scripts/vif \
275 /usr/sbin/xen-bugtool \
279 if [ ! -f "%{_prefix}/xs-original/$s" ]; then
280 printf "Original XenServer $s script not present in %{_prefix}/xs-original\n"
281 printf "Could not restore original XenServer script.\n"
284 && mv "%{_prefix}/xs-original/$s" "$f") \
285 || printf "Could not restore original XenServer $s script.\n"
289 find %{_prefix} -type d -depth -exec rmdir \{\} \; \
290 || printf "Could not remove vSwitch install directory.\n"
292 # Remove all configuration and log files
293 rm -f /etc/ovs-vswitchd.conf
294 rm -f /etc/sysconfig/vswitch
295 rm -f /var/log/vswitch*
296 rm -f /etc/ovs-vswitchd.cacert
298 printf "\nYou MUST reboot the server now to complete the change to\n"
299 printf "standard Xen networking. Attempts to modify networking on the\n"
300 printf "server or any hosted VM will fail until after the reboot and\n"
301 printf "could leave the server in a state requiring manual recovery.\n\n"
306 %defattr(-,root,root)
308 /etc/init.d/vswitch-xapi-update
309 /etc/xapi.d/plugins/vswitch-cfg-update
310 /etc/sysconfig/vswitch.example
311 /etc/logrotate.d/vswitch
312 /etc/profile.d/vswitch.sh
313 /root/vswitch/kernel_modules/brcompat_mod.ko
314 /root/vswitch/kernel_modules/openvswitch_mod.ko
315 /root/vswitch/kernel_modules/veth_mod.ko
316 /root/vswitch/scripts/dump-vif-details
317 /root/vswitch/scripts/interface-reconfigure
318 /root/vswitch/scripts/vif
319 /root/vswitch/scripts/xen-bugtool
320 /root/vswitch/scripts/XSFeatureVSwitch.py
321 /root/vswitch/scripts/brctl
322 # Following two files are generated automatically by rpm. We don't
323 # really need them and they won't be used on the XenServer, but there
324 # isn't an obvious place to get rid of them since they are generated
325 # after the install script runs. Since they are small, we just
327 /root/vswitch/scripts/XSFeatureVSwitch.pyc
328 /root/vswitch/scripts/XSFeatureVSwitch.pyo
329 /root/vswitch/sbin/ovs-brcompatd
330 /root/vswitch/sbin/ovs-vswitchd
331 /root/vswitch/bin/ovs-appctl
332 /root/vswitch/bin/ovs-cfg-mod
333 /root/vswitch/bin/ovs-dpctl
334 /root/vswitch/bin/ovs-ofctl
335 /root/vswitch/share/man/man5/ovs-vswitchd.conf.5
336 /root/vswitch/share/man/man8/ovs-appctl.8
337 /root/vswitch/share/man/man8/ovs-brcompatd.8
338 /root/vswitch/share/man/man8/ovs-cfg-mod.8
339 /root/vswitch/share/man/man8/ovs-dpctl.8
340 /root/vswitch/share/man/man8/ovs-ofctl.8
341 /root/vswitch/share/man/man8/ovs-vswitchd.8