1 # Spec file for vswitch and related programs.
3 # Copyright (C) 2009, 2010 Nicira Networks, Inc.
5 # Copying and distribution of this file, with or without modification,
6 # are permitted in any medium without royalty provided the copyright
7 # notice and this notice are preserved. This file is offered as-is,
8 # without warranty of any kind.
10 # When building, the rpmbuild command line should define
11 # vswitch_version, xen_version, and build_number using -D arguments.
14 # rpmbuild -D "vswitch_version 0.8.9~1+build123" -D "xen_version 2.6.18-128.1.1.el5.xs5.1.0.483.1000xen" -D "build_number --with-build-number=123" -bb /usr/src/redhat/SPECS/vswitch-xen.spec
16 %define version %{vswitch_version}-%{xen_version}
19 Summary: Virtual switch
20 Group: System Environment/Daemons
21 URL: http://www.openvswitch.org/
22 Version: %{vswitch_version}
24 # The entire source code is ASL 2.0 except datapath/ which is GPLv2
25 License: ASL 2.0 and GPLv2
27 Source: openvswitch-%{vswitch_version}.tar.gz
28 Buildroot: /tmp/vswitch-xen-rpm
29 Requires: kernel-xen = %(echo '%{xen_version}' | sed 's/xen$//')
30 # The following Conflicts prevents the "vswitch" package generated by
31 # this spec file from installing at the same time as the "openvswitch"
32 # package shipped with XenServer 5.5.900. In fact, the packages
33 # contain some files with identical names anyhow, so they will not
34 # coexist, but adding an explicit Conflicts makes this conflict more
36 Conflicts: openvswitch
39 The vswitch provides standard network bridging functions augmented with
40 support for the OpenFlow protocol for remote per-flow control of
44 %setup -q -n openvswitch-%{vswitch_version}
47 ./configure --prefix=/usr --sysconfdir=/etc --localstatedir=%{_localstatedir} --with-l26=/lib/modules/%{xen_version}/build --enable-ssl %{build_number}
51 rm -rf $RPM_BUILD_ROOT
52 make install DESTDIR=$RPM_BUILD_ROOT
53 install -d -m 755 $RPM_BUILD_ROOT/etc
54 install -d -m 755 $RPM_BUILD_ROOT/etc/init.d
55 install -m 755 xenserver/etc_init.d_vswitch \
56 $RPM_BUILD_ROOT/etc/init.d/vswitch
57 install -m 755 xenserver/etc_init.d_vswitch-xapi-update \
58 $RPM_BUILD_ROOT/etc/init.d/vswitch-xapi-update
59 install -d -m 755 $RPM_BUILD_ROOT/etc/sysconfig
60 install -d -m 755 $RPM_BUILD_ROOT/etc/logrotate.d
61 install -m 755 xenserver/etc_logrotate.d_vswitch \
62 $RPM_BUILD_ROOT/etc/logrotate.d/vswitch
63 install -d -m 755 $RPM_BUILD_ROOT/etc/profile.d
64 install -m 755 xenserver/etc_profile.d_vswitch.sh \
65 $RPM_BUILD_ROOT/etc/profile.d/vswitch.sh
66 install -d -m 755 $RPM_BUILD_ROOT/etc/xapi.d/plugins
67 install -m 755 xenserver/etc_xapi.d_plugins_vswitch-cfg-update \
68 $RPM_BUILD_ROOT/etc/xapi.d/plugins/vswitch-cfg-update
69 install -d -m 755 $RPM_BUILD_ROOT/usr/share/vswitch/scripts
70 install -m 644 vswitchd/vswitch-idl.ovsschema \
71 $RPM_BUILD_ROOT/usr/share/vswitch/vswitch-idl.ovsschema
72 install -m 755 xenserver/opt_xensource_libexec_interface-reconfigure \
73 $RPM_BUILD_ROOT/usr/share/vswitch/scripts/interface-reconfigure
74 install -m 755 xenserver/etc_xensource_scripts_vif \
75 $RPM_BUILD_ROOT/usr/share/vswitch/scripts/vif
76 install -m 755 xenserver/usr_share_vswitch_scripts_dump-vif-details \
77 $RPM_BUILD_ROOT/usr/share/vswitch/scripts/dump-vif-details
78 install -m 755 xenserver/usr_share_vswitch_scripts_refresh-xs-network-uuids \
79 $RPM_BUILD_ROOT/usr/share/vswitch/scripts/refresh-xs-network-uuids
80 install -m 755 xenserver/usr_sbin_xen-bugtool \
81 $RPM_BUILD_ROOT/usr/share/vswitch/scripts/xen-bugtool
82 install -m 755 xenserver/usr_sbin_brctl \
83 $RPM_BUILD_ROOT/usr/share/vswitch/scripts/brctl
84 install -m 755 xenserver/usr_share_vswitch_scripts_sysconfig.template \
85 $RPM_BUILD_ROOT/usr/share/vswitch/scripts/sysconfig.template
87 xenserver/usr_lib_xsconsole_plugins-base_XSFeatureVSwitch.py \
88 $RPM_BUILD_ROOT/usr/share/vswitch/scripts/XSFeatureVSwitch.py
90 install -d -m 755 $RPM_BUILD_ROOT/lib/modules/%{xen_version}/kernel/net/vswitch
91 find datapath/linux-2.6 -name *.ko -exec install -m 755 \{\} $RPM_BUILD_ROOT/lib/modules/%{xen_version}/kernel/net/vswitch \;
93 # Get rid of stuff we don't want to make RPM happy.
95 $RPM_BUILD_ROOT/usr/bin/ovs-controller \
96 $RPM_BUILD_ROOT/usr/bin/ovs-discover \
97 $RPM_BUILD_ROOT/usr/bin/ovs-kill \
98 $RPM_BUILD_ROOT/usr/bin/ovs-openflowd \
99 $RPM_BUILD_ROOT/usr/bin/ovs-pki \
100 $RPM_BUILD_ROOT/usr/bin/ovs-wdt \
101 $RPM_BUILD_ROOT/usr/sbin/ovs-monitor \
102 $RPM_BUILD_ROOT/usr/share/man/man8/ovs-controller.8 \
103 $RPM_BUILD_ROOT/usr/share/man/man8/ovs-discover.8 \
104 $RPM_BUILD_ROOT/usr/share/man/man8/ovs-kill.8 \
105 $RPM_BUILD_ROOT/usr/share/man/man8/ovs-openflowd.8 \
106 $RPM_BUILD_ROOT/usr/share/man/man8/ovs-pki.8
107 rm -f $RPM_BUILD_ROOT/lib/modules/%{xen_version}/kernel/net/vswitch/veth_mod.ko
109 install -d -m 755 $RPM_BUILD_ROOT/var/lib/openvswitch
112 rm -rf $RPM_BUILD_ROOT
115 if [ ! -f /etc/xensource-inventory ]; then
116 printf "XenSource inventory not present in /etc/xensource-inventory"
120 if [ "$1" = "1" ]; then
121 if md5sum -c --status <<EOF
122 ca141d60061dcfdade73e75abc6529b5 /usr/sbin/brctl
123 b8e9835862ef1a9cec2a3f477d26c989 /etc/xensource/scripts/vif
124 51970ad613a3996d5997e18e44db47da /opt/xensource/libexec/interface-reconfigure
125 5654c8c36699fcc8744ca9cd5b855414 /usr/sbin/xen-bugtool
128 printf "\nVerified host scripts from XenServer 5.5.0.\n\n"
129 elif md5sum -c --status <<EOF
130 ca141d60061dcfdade73e75abc6529b5 /usr/sbin/brctl
131 b8e9835862ef1a9cec2a3f477d26c989 /etc/xensource/scripts/vif
132 ce451d3c985fd1db6497a363f0d9dedb /opt/xensource/libexec/interface-reconfigure
133 2b53f500431fcba5276c896e9e4281b9 /usr/sbin/xen-bugtool
136 printf "\nVerified host scripts from XenServer 5.5.900.\n\n"
140 The original XenServer scripts replaced by this package are not those
141 of any supported version of XenServer. This could lead to unexpected
142 behavior of your server. Unless you are sure you know what you are
143 doing, it is highly recommended that you remove this package
144 immediately after the install completes, which will restore the
145 XenServer scripts that you were previously using.
151 if test ! -e /var/lib/openvswitch/dbcache; then
152 if test "$1" = 1; then
153 printf "Creating xapi database cache... "
155 printf "warning: Open vSwitch is being re-installed or upgraded,\n"
156 printf " but the xapi database cache is missing.\n"
157 printf "Re-creating xapi database cache... "
160 if /usr/share/vswitch/scripts/interface-reconfigure rewrite; then
164 printf "Open vSwitch can only be installed on a XenServer that\n"
165 printf "has connectivity to xapi on the pool master. Please\n"
166 printf "fix connectivity to the pool master, then try again.\n"
171 # Ensure that modprobe will find our modules.
172 depmod %{xen_version}
174 if grep -F net.ipv4.conf.all.arp_filter /etc/sysctl.conf >/dev/null 2>&1; then :; else
175 cat >>/etc/sysctl.conf <<EOF
176 # This works around an issue in xhad, which binds to a particular
177 # Ethernet device, which in turn causes ICMP port unreachable messages
178 # if packets are received are on the wrong interface, which in turn
179 # can happen if we send out ARP replies on every interface (as Linux
180 # does by default) instead of just on the interface that has the IP
181 # address being ARPed for, which this sysctl setting in turn works
185 net.ipv4.conf.all.arp_filter = 1
189 if test ! -e /etc/ovs-vswitchd.conf.db; then
190 # Create ovs-vswitchd config database
191 ovsdb-tool -vANY:console:emer create /etc/ovs-vswitchd.conf.db \
192 /usr/share/vswitch/vswitch-idl.ovsschema \
194 # Create initial table in config database
195 ovsdb-tool -vANY:console:emer transact /etc/ovs-vswitchd.conf.db \
196 '[{"op": "insert", "table": "Open_vSwitch", "row": {}}]' \
200 # Create default or update existing /etc/sysconfig/vswitch.
201 SYSCONFIG=/etc/sysconfig/vswitch
202 TEMPLATE=/usr/share/vswitch/scripts/sysconfig.template
203 if [ ! -e $SYSCONFIG ]; then
204 cp $TEMPLATE $SYSCONFIG
206 for var in $(awk -F'[ :]' '/^# [_A-Z0-9]+:/{print $2}' $TEMPLATE)
208 if ! grep $var $SYSCONFIG >/dev/null 2>&1; then
210 sed -n "/$var:/,/$var=/p" $TEMPLATE >> $SYSCONFIG
215 # Replace XenServer files by our versions.
216 mkdir -p /usr/lib/vswitch/xs-original \
217 || printf "Could not create script backup directory.\n"
219 /opt/xensource/libexec/interface-reconfigure \
220 /etc/xensource/scripts/vif \
221 /usr/sbin/xen-bugtool \
226 if [ "$t" != "/usr/share/vswitch/scripts/$s" ]; then
227 mv "$f" /usr/lib/vswitch/xs-original/ \
228 || printf "Could not save original XenServer $s script\n"
229 ln -s "/usr/share/vswitch/scripts/$s" "$f" \
230 || printf "Could not link to vSwitch $s script\n"
234 # Install xsconsole plugin
235 plugin=$(readlink /usr/lib/xsconsole/plugins-base/XSFeatureVSwitch.py)
236 if [ "$plugin" != "/usr/share/vswitch/scripts/XSFeatureVSwitch.py" ]; then
237 rm -f /usr/lib/xsconsole/plugins-base/XSFeatureVSwitch.py
238 ln -s /usr/share/vswitch/scripts/XSFeatureVSwitch.py /usr/lib/xsconsole/plugins-base/ || printf "Could not link to vSswitch xsconsole plugin.\n"
241 # Ensure all required services are set to run
242 for s in vswitch vswitch-xapi-update; do
243 if chkconfig --list $s >/dev/null 2>&1; then
244 chkconfig --del $s || printf "Could not remove $s init script."
246 chkconfig --add $s || printf "Could not add $s init script."
247 chkconfig $s on || printf "Could not enable $s init script."
250 if [ "$1" = "1" ]; then # $1 = 2 for upgrade
251 printf "\nYou MUST reboot the server NOW to complete the change to the\n"
252 printf "the vSwitch. Attempts to modify networking on the server\n"
253 printf "or any hosted VM will fail until after the reboot and could\n"
254 printf "leave the server in an state requiring manual recovery.\n\n"
256 printf "\nTo use the new vSwitch, you should reboot the server\n"
257 printf "now. Failure to do so may result in incorrect operation.\n\n"
261 if [ "$1" = "0" ]; then # $1 = 1 for upgrade
262 for s in vswitch vswitch-xapi-update; do
263 chkconfig --del $s || printf "Could not remove $s init script."
269 if [ "$1" = "0" ]; then # $1 = 1 for upgrade
271 rm -f /usr/lib/xsconsole/plugins-base/XSFeatureVSwitch.py \
272 /usr/lib/xsconsole/plugins-base/XSFeatureVSwitch.pyc \
273 /usr/lib/xsconsole/plugins-base/XSFeatureVSwitch.pyo \
274 || printf "Could not remove vSwitch xsconsole plugin.\n"
276 # Restore original XenServer scripts
278 /opt/xensource/libexec/interface-reconfigure \
279 /etc/xensource/scripts/vif \
280 /usr/sbin/xen-bugtool \
284 if [ ! -f "/usr/lib/vswitch/xs-original/$s" ]; then
285 printf "Original XenServer $s script not present in /usr/lib/vswitch/xs-original\n"
286 printf "Could not restore original XenServer script.\n"
289 && mv "/usr/lib/vswitch/xs-original/$s" "$f") \
290 || printf "Could not restore original XenServer $s script.\n"
294 # Remove all configuration files
295 rm -f /etc/ovs-vswitchd.conf.db
296 rm -f /etc/sysconfig/vswitch
297 rm -f /etc/ovs-vswitchd.cacert
298 rm -f /var/lib/openvswitch/dbcache
300 printf "\nYou MUST reboot the server now to complete the change to\n"
301 printf "standard Xen networking. Attempts to modify networking on the\n"
302 printf "server or any hosted VM will fail until after the reboot and\n"
303 printf "could leave the server in a state requiring manual recovery.\n\n"
308 %defattr(-,root,root)
310 /etc/init.d/vswitch-xapi-update
311 /etc/xapi.d/plugins/vswitch-cfg-update
312 /etc/logrotate.d/vswitch
313 /etc/profile.d/vswitch.sh
314 /lib/modules/%{xen_version}/kernel/net/vswitch/openvswitch_mod.ko
315 /lib/modules/%{xen_version}/kernel/net/vswitch/brcompat_mod.ko
316 %if %(echo '%{xen_version}'|awk -F"." '{if ($3>=18) print 1; else print 0;}')
317 /lib/modules/%{xen_version}/kernel/net/vswitch/ip_gre_mod.ko
319 /usr/share/vswitch/scripts/dump-vif-details
320 /usr/share/vswitch/scripts/refresh-xs-network-uuids
321 /usr/share/vswitch/scripts/interface-reconfigure
322 /usr/share/vswitch/scripts/vif
323 /usr/share/vswitch/scripts/xen-bugtool
324 /usr/share/vswitch/scripts/XSFeatureVSwitch.py
325 /usr/share/vswitch/scripts/brctl
326 /usr/share/vswitch/scripts/sysconfig.template
327 # Following two files are generated automatically by rpm. We don't
328 # really need them and they won't be used on the XenServer, but there
329 # isn't an obvious place to get rid of them since they are generated
330 # after the install script runs. Since they are small, we just
332 /usr/share/vswitch/scripts/XSFeatureVSwitch.pyc
333 /usr/share/vswitch/scripts/XSFeatureVSwitch.pyo
334 /usr/share/vswitch/vswitch-idl.ovsschema
335 /usr/sbin/ovs-brcompatd
336 /usr/sbin/ovs-vswitchd
337 /usr/sbin/ovsdb-server
342 /usr/bin/ovsdb-client
344 /usr/share/man/man1/ovsdb-client.1.gz
345 /usr/share/man/man1/ovsdb-server.1.gz
346 /usr/share/man/man1/ovsdb-tool.1.gz
347 /usr/share/man/man8/ovs-appctl.8.gz
348 /usr/share/man/man8/ovs-brcompatd.8.gz
349 /usr/share/man/man8/ovs-dpctl.8.gz
350 /usr/share/man/man8/ovs-ofctl.8.gz
351 /usr/share/man/man8/ovs-vsctl.8.gz
352 /usr/share/man/man8/ovs-vswitchd.8.gz