1 # Spec file for vswitch and related programs.
3 # Copyright (C) 2009 Nicira Networks, Inc.
5 # Copying and distribution of this file, with or without modification,
6 # are permitted in any medium without royalty provided the copyright
7 # notice and this notice are preserved. This file is offered as-is,
8 # without warranty of any kind.
10 # When building, the rpmbuild command line should define
11 # vswitch_version, xen_version, and build_number using -D arguments.
14 # rpmbuild -D "vswitch_version 0.8.9~1+build123" -D "xen_version 2.6.18-128.1.1.el5.xs5.1.0.483.1000xen" -D "build_number --with-build-number=123" -bb /usr/src/redhat/SPECS/vswitch-xen.spec
16 %define version %{vswitch_version}-%{xen_version}
17 %define _prefix /root/vswitch
20 Summary: Virtual switch
21 Group: System Environment/Daemons
22 URL: http://www.openvswitch.org/
23 Version: %{vswitch_version}
26 Source: openvswitch-%{vswitch_version}.tar.gz
27 Buildroot: /tmp/vswitch-xen-rpm
28 Requires: kernel-xen = %(echo '%{xen_version}' | sed 's/xen$//')
31 The vswitch provides standard network bridging functions augmented with
32 support for the OpenFlow protocol for remote per-flow control of
36 %setup -q -n openvswitch-%{vswitch_version}
39 ./configure --prefix=%{_prefix} --localstatedir=%{_localstatedir} --with-l26=/lib/modules/%{xen_version}/build --enable-ssl %{build_number}
43 rm -rf $RPM_BUILD_ROOT
44 make install DESTDIR=$RPM_BUILD_ROOT prefix=%{_prefix}
45 install -d -m 755 $RPM_BUILD_ROOT/etc
46 install -d -m 755 $RPM_BUILD_ROOT/etc/init.d
47 install -m 755 xenserver/etc_init.d_vswitch \
48 $RPM_BUILD_ROOT/etc/init.d/vswitch
49 install -m 755 xenserver/etc_init.d_vswitch-xapi-update \
50 $RPM_BUILD_ROOT/etc/init.d/vswitch-xapi-update
51 install -d -m 755 $RPM_BUILD_ROOT/etc/sysconfig
52 install -m 755 xenserver/etc_sysconfig_vswitch.example \
53 $RPM_BUILD_ROOT/etc/sysconfig/vswitch.example
54 install -d -m 755 $RPM_BUILD_ROOT/etc/logrotate.d
55 install -m 755 xenserver/etc_logrotate.d_vswitch \
56 $RPM_BUILD_ROOT/etc/logrotate.d/vswitch
57 install -d -m 755 $RPM_BUILD_ROOT/etc/profile.d
58 install -m 755 xenserver/etc_profile.d_vswitch.sh \
59 $RPM_BUILD_ROOT/etc/profile.d/vswitch.sh
60 install -d -m 755 $RPM_BUILD_ROOT/etc/xapi.d/plugins
61 install -m 755 xenserver/etc_xapi.d_plugins_vswitch-cfg-update \
62 $RPM_BUILD_ROOT/etc/xapi.d/plugins/vswitch-cfg-update
63 install -d -m 755 $RPM_BUILD_ROOT%{_prefix}/scripts
64 install -m 755 xenserver/opt_xensource_libexec_interface-reconfigure \
65 $RPM_BUILD_ROOT%{_prefix}/scripts/interface-reconfigure
66 install -m 755 xenserver/etc_xensource_scripts_vif \
67 $RPM_BUILD_ROOT%{_prefix}/scripts/vif
68 install -m 755 xenserver/root_vswitch_scripts_dump-vif-details \
69 $RPM_BUILD_ROOT%{_prefix}/scripts/dump-vif-details
71 xenserver/usr_lib_xsconsole_plugins-base_XSFeatureVSwitch.py \
72 $RPM_BUILD_ROOT%{_prefix}/scripts/XSFeatureVSwitch.py
74 install -d -m 755 $RPM_BUILD_ROOT%{_prefix}/kernel_modules
75 find datapath/linux-2.6 -name *.ko -exec install -m 755 \{\} $RPM_BUILD_ROOT%{_prefix}/kernel_modules/ \;
77 # Get rid of stuff we don't want to make RPM happy.
79 $RPM_BUILD_ROOT/root/vswitch/bin/ezio-term \
80 $RPM_BUILD_ROOT/root/vswitch/bin/ovs-controller \
81 $RPM_BUILD_ROOT/root/vswitch/bin/ovs-discover \
82 $RPM_BUILD_ROOT/root/vswitch/bin/ovs-kill \
83 $RPM_BUILD_ROOT/root/vswitch/bin/ovs-pki \
84 $RPM_BUILD_ROOT/root/vswitch/bin/ovs-switchui \
85 $RPM_BUILD_ROOT/root/vswitch/bin/ovs-wdt \
86 $RPM_BUILD_ROOT/root/vswitch/bin/secchan \
87 $RPM_BUILD_ROOT/root/vswitch/sbin/ovs-monitor \
88 $RPM_BUILD_ROOT/root/vswitch/share/man/man8/ovs-controller.8 \
89 $RPM_BUILD_ROOT/root/vswitch/share/man/man8/ovs-discover.8 \
90 $RPM_BUILD_ROOT/root/vswitch/share/man/man8/ovs-kill.8 \
91 $RPM_BUILD_ROOT/root/vswitch/share/man/man8/ovs-pki.8 \
92 $RPM_BUILD_ROOT/root/vswitch/share/man/man8/secchan.8 \
93 $RPM_BUILD_ROOT/root/vswitch/share/openvswitch
96 rm -rf $RPM_BUILD_ROOT
99 if [ ! -f /etc/xensource-inventory ]; then
100 printf "XenSource inventory not present in /etc/xensource-inventory"
104 if [ "$1" = "1" ]; then
105 if ! md5sum -c --status <<EOF
106 b8e9835862ef1a9cec2a3f477d26c989 /etc/xensource/scripts/vif
107 51970ad613a3996d5997e18e44db47da /opt/xensource/libexec/interface-reconfigure
110 printf "\nThe original XenServer scripts replaced by this package\n"
111 printf "are different than expected. This could lead to unexpected\n"
112 printf "behavior of your server. Unless you are sure you know what\n"
113 printf "you are doing, it is highly recomended that you remove this\n"
114 printf "package immediately after the install completes, which\n"
115 printf "will restore the XenServer scripts that you were previously\n"
120 if test ! -e /etc/ovs-vswitch.dbcache; then
121 if test "$1" = 1; then
122 printf "Creating xapi database cache... "
124 printf "warning: Open vSwitch is being re-installed or upgraded,\n"
125 printf " but the xapi database cache is missing.\n"
126 printf "Re-creating xapi database cache... "
129 source /etc/xensource-inventory
130 if python - "$INSTALLATION_UUID" <<EOF
135 session = XenAPI.xapi_local()
137 session.xenapi.login_with_password("root", "")
139 vlans = session.xenapi.VLAN.get_all_records()
140 bonds = session.xenapi.Bond.get_all_records()
141 pifs = session.xenapi.PIF.get_all_records()
142 networks = session.xenapi.network.get_all_records()
143 host = session.xenapi.host.get_by_uuid(sys.argv[1])
145 session.xenapi.session.logout()
147 dbcache_file = "/etc/ovs-vswitch.dbcache"
148 f = open(dbcache_file, 'w')
149 pickle.dump({'vlans': vlans,
152 'networks': networks}, f)
153 pickle.dump({'host': host}, f)
160 printf "Open vSwitch can only be installed on a XenServer that\n"
161 printf "has connectivity to xapi on the pool master. Please\n"
162 printf "fix connectivity to the pool master, then try again.\n"
168 source /etc/xensource-inventory
170 if grep -F net.ipv4.conf.all.arp_filter /etc/sysctl.conf >/dev/null 2>&1; then :; else
171 cat >>/etc/sysctl.conf <<EOF
172 # This works around an issue in xhad, which binds to a particular
173 # Ethernet device, which in turn causes ICMP port unreachable messages
174 # if packets are received are on the wrong interface, which in turn
175 # can happen if we send out ARP replies on every interface (as Linux
176 # does by default) instead of just on the interface that has the IP
177 # address being ARPed for, which this sysctl setting in turn works
181 net.ipv4.conf.all.arp_filter = 1
186 "other-config:vSwitchVersion=%{version}" uuid="$INSTALLATION_UUID" ||
187 echo "Could not set vSwitchVersion config parameter"
189 # Ensure ovs-vswitchd.conf exists
190 touch /etc/ovs-vswitchd.conf
192 # Replace original XenServer files
193 mkdir -p %{_prefix}/xs-original \
194 || printf "Could not create script backup directory.\n"
196 /opt/xensource/libexec/interface-reconfigure \
197 /etc/xensource/scripts/vif
201 if [ "$t" != "%{_prefix}/scripts/$s" ]; then
202 mv "$f" %{_prefix}/xs-original/ \
203 || printf "Could not save original XenServer $s script\n"
204 ln -s "%{_prefix}/scripts/$s" "$f" \
205 || printf "Could not link to vSwitch $s script\n"
209 # Install xsconsole plugin
210 plugin=$(readlink /usr/lib/xsconsole/plugins-base/XSFeatureVSwitch.py)
211 if [ "$plugin" != "/root/vswitch/scripts/XSFeatureVSwitch.py" ]; then
212 rm -f /usr/lib/xsconsole/plugins-base/XSFeatureVSwitch.py
213 ln -s /root/vswitch/scripts/XSFeatureVSwitch.py /usr/lib/xsconsole/plugins-base/ || printf "Could not link to vSswitch xsconsole plugin.\n"
216 # Ensure all required services are set to run
217 for s in vswitch vswitch-xapi-update; do
218 if chkconfig --list $s >/dev/null 2>&1; then
219 chkconfig --del $s || printf "Could not remove $s init script."
221 chkconfig --add $s || printf "Could not add $s init script."
222 chkconfig $s on || printf "Could not enable $s init script."
225 if [ "$1" = "1" ]; then # $1 = 2 for upgrade
226 printf "\nYou MUST reboot the server NOW to complete the change to the\n"
227 printf "the vSwitch. Attempts to modify networking on the server\n"
228 printf "or any hosted VM will fail until after the reboot and could\n"
229 printf "leave the server in an state requiring manual recovery.\n\n"
231 printf "\nTo use the new vSwitch, you should reboot the server\n"
232 printf "now. Failure to do so may result in incorrect operation.\n\n"
236 if [ "$1" = "0" ]; then # $1 = 1 for upgrade
237 for s in vswitch vswitch-xapi-update; do
238 chkconfig --del $s || printf "Could not remove $s init script."
244 if [ "$1" = "0" ]; then # $1 = 1 for upgrade
246 rm -f /usr/lib/xsconsole/plugins-base/XSFeatureVSwitch.py \
247 /usr/lib/xsconsole/plugins-base/XSFeatureVSwitch.pyc \
248 /usr/lib/xsconsole/plugins-base/XSFeatureVSwitch.pyo \
249 || printf "Could not remove vSwitch xsconsole plugin.\n"
251 # Restore original XenServer scripts
253 /opt/xensource/libexec/interface-reconfigure \
254 /etc/xensource/scripts/vif
257 if [ ! -f "%{_prefix}/xs-original/$s" ]; then
258 printf "Original XenServer $s script not present in %{_prefix}/xs-original\n"
259 printf "Could not restore original XenServer script.\n"
262 && mv "%{_prefix}/xs-original/$s" "$f") \
263 || printf "Could not restore original XenServer $s script.\n"
267 find %{_prefix} -type d -depth -exec rmdir \{\} \; \
268 || printf "Could not remove vSwitch install directory.\n"
270 # Remove all configuration and log files
271 rm -f /etc/ovs-vswitchd.conf
272 rm -f /etc/sysconfig/vswitch
273 rm -f /var/log/vswitch*
274 rm -f /etc/ovs-vswitchd.cacert
276 if [ ! -f /etc/xensource-inventory ]; then
277 printf "XenSource inventory not present in /etc/xensource-inventory\n"
278 printf "Could not remove vSwitchVersion from XAPI database.\n"
281 source /etc/xensource-inventory
282 xe host-param-remove \
283 param-name=other-config param-key=vSwitchVersion \
284 uuid="$INSTALLATION_UUID" ||
285 echo "Could not clear vSwitchVersion config parameter."
288 printf "\nYou MUST reboot the server now to complete the change to\n"
289 printf "standard Xen networking. Attempts to modify networking on the\n"
290 printf "server or any hosted VM will fail until after the reboot and\n"
291 printf "could leave the server in a state requiring manual recovery.\n\n"
296 %defattr(-,root,root)
298 /etc/init.d/vswitch-xapi-update
299 /etc/xapi.d/plugins/vswitch-cfg-update
300 /etc/sysconfig/vswitch.example
301 /etc/logrotate.d/vswitch
302 /etc/profile.d/vswitch.sh
303 /root/vswitch/kernel_modules/brcompat_mod.ko
304 /root/vswitch/kernel_modules/openvswitch_mod.ko
305 /root/vswitch/kernel_modules/veth_mod.ko
306 /root/vswitch/scripts/dump-vif-details
307 /root/vswitch/scripts/interface-reconfigure
308 /root/vswitch/scripts/vif
309 /root/vswitch/scripts/XSFeatureVSwitch.py
310 # Following two files are generated automatically by rpm. We don't
311 # really need them and they won't be used on the XenServer, but there
312 # isn't an obvious place to get rid of them since they are generated
313 # after the install script runs. Since they are small, we just
315 /root/vswitch/scripts/XSFeatureVSwitch.pyc
316 /root/vswitch/scripts/XSFeatureVSwitch.pyo
317 /root/vswitch/sbin/ovs-brcompatd
318 /root/vswitch/sbin/ovs-vswitchd
319 /root/vswitch/bin/ovs-appctl
320 /root/vswitch/bin/ovs-cfg-mod
321 /root/vswitch/bin/ovs-dpctl
322 /root/vswitch/bin/ovs-ofctl
323 /root/vswitch/share/man/man5/ovs-vswitchd.conf.5
324 /root/vswitch/share/man/man8/ovs-appctl.8
325 /root/vswitch/share/man/man8/ovs-brcompatd.8
326 /root/vswitch/share/man/man8/ovs-cfg-mod.8
327 /root/vswitch/share/man/man8/ovs-dpctl.8
328 /root/vswitch/share/man/man8/ovs-ofctl.8
329 /root/vswitch/share/man/man8/ovs-vswitchd.8