pintos-os.org Git - openvswitch/blob - xenserver/openvswitch-xen.spec

   1 # Spec file for Open vSwitch.
   2
   3 # Copyright (C) 2009, 2010 Nicira Networks, Inc.
   4 #
   5 # Copying and distribution of this file, with or without modification,
   6 # are permitted in any medium without royalty provided the copyright
   7 # notice and this notice are preserved.  This file is offered as-is,
   8 # without warranty of any kind.
   9
  10 # When building, the rpmbuild command line should define
  11 # openvswitch_version, xen_version, and build_number using -D arguments.
  12 # for example:
  13 #
  14 #    rpmbuild -D "openvswitch_version 0.8.9~1+build123" -D "xen_version 2.6.18-128.1.1.el5.xs5.1.0.483.1000xen" -D "build_number --with-build-number=123" -bb /usr/src/redhat/SPECS/openvswitch-xen.spec
  15 #
  16 %define version %{openvswitch_version}-%{xen_version}
  17
  18 Name: openvswitch
  19 Summary: Virtual switch
  20 Group: System Environment/Daemons
  21 URL: http://www.openvswitch.org/
  22 Vendor: Nicira Networks, Inc.
  23 Version: %{openvswitch_version}
  24
  25 # The entire source code is ASL 2.0 except datapath/ which is GPLv2
  26 License: ASL 2.0 and GPLv2
  27 Release: 1
  28 Source: openvswitch-%{openvswitch_version}.tar.gz
  29 Buildroot: /tmp/openvswitch-xen-rpm
  30 Requires: kernel-xen = %(echo '%{xen_version}' | sed 's/xen$//')
  31
  32 %description
  33 Open vSwitch provides standard network bridging functions augmented with
  34 support for the OpenFlow protocol for remote per-flow control of
  35 traffic.
  36
  37 %prep
  38 %setup -q -n openvswitch-%{openvswitch_version}
  39
  40 %build
  41 ./configure --prefix=/usr --sysconfdir=/etc --localstatedir=%{_localstatedir} --with-l26=/lib/modules/%{xen_version}/build --enable-ssl %{build_number}
  42 make %{_smp_mflags}
  43
  44 %install
  45 rm -rf $RPM_BUILD_ROOT
  46 make install DESTDIR=$RPM_BUILD_ROOT
  47 install -d -m 755 $RPM_BUILD_ROOT/etc
  48 install -d -m 755 $RPM_BUILD_ROOT/etc/init.d
  49 install -m 755 xenserver/etc_init.d_openvswitch \
  50          $RPM_BUILD_ROOT/etc/init.d/openvswitch
  51 install -m 755 xenserver/etc_init.d_openvswitch-xapi-update \
  52          $RPM_BUILD_ROOT/etc/init.d/openvswitch-xapi-update
  53 install -d -m 755 $RPM_BUILD_ROOT/etc/sysconfig
  54 install -d -m 755 $RPM_BUILD_ROOT/etc/logrotate.d
  55 install -m 755 xenserver/etc_logrotate.d_openvswitch \
  56          $RPM_BUILD_ROOT/etc/logrotate.d/openvswitch
  57 install -d -m 755 $RPM_BUILD_ROOT/etc/profile.d
  58 install -m 755 xenserver/etc_profile.d_openvswitch.sh \
  59          $RPM_BUILD_ROOT/etc/profile.d/openvswitch.sh
  60 install -d -m 755 $RPM_BUILD_ROOT/etc/xapi.d/plugins
  61 install -m 755 xenserver/etc_xapi.d_plugins_openvswitch-cfg-update \
  62          $RPM_BUILD_ROOT/etc/xapi.d/plugins/openvswitch-cfg-update
  63 install -d -m 755 $RPM_BUILD_ROOT/usr/share/openvswitch/scripts
  64 install -m 644 vswitchd/vswitch.ovsschema \
  65          $RPM_BUILD_ROOT/usr/share/openvswitch/vswitch.ovsschema
  66 install -m 755 xenserver/opt_xensource_libexec_interface-reconfigure \
  67              $RPM_BUILD_ROOT/usr/share/openvswitch/scripts/interface-reconfigure
  68 install -m 644 xenserver/opt_xensource_libexec_InterfaceReconfigure.py \
  69              $RPM_BUILD_ROOT/usr/share/openvswitch/scripts/InterfaceReconfigure.py
  70 install -m 644 xenserver/opt_xensource_libexec_InterfaceReconfigureBridge.py \
  71              $RPM_BUILD_ROOT/usr/share/openvswitch/scripts/InterfaceReconfigureBridge.py
  72 install -m 644 xenserver/opt_xensource_libexec_InterfaceReconfigureVswitch.py \
  73              $RPM_BUILD_ROOT/usr/share/openvswitch/scripts/InterfaceReconfigureVswitch.py
  74 install -m 755 xenserver/etc_xensource_scripts_vif \
  75              $RPM_BUILD_ROOT/usr/share/openvswitch/scripts/vif
  76 install -m 755 xenserver/usr_share_openvswitch_scripts_monitor-external-ids \
  77                $RPM_BUILD_ROOT/usr/share/openvswitch/scripts/monitor-external-ids
  78 install -m 755 xenserver/usr_share_openvswitch_scripts_refresh-xs-network-uuids \
  79                $RPM_BUILD_ROOT/usr/share/openvswitch/scripts/refresh-xs-network-uuids
  80 install -m 755 xenserver/usr_sbin_xen-bugtool \
  81              $RPM_BUILD_ROOT/usr/share/openvswitch/scripts/xen-bugtool
  82 install -m 755 xenserver/usr_sbin_brctl \
  83              $RPM_BUILD_ROOT/usr/share/openvswitch/scripts/brctl
  84 install -m 755 xenserver/usr_share_openvswitch_scripts_sysconfig.template \
  85          $RPM_BUILD_ROOT/usr/share/openvswitch/scripts/sysconfig.template
  86 install -d -m 755 $RPM_BUILD_ROOT/usr/lib/xsconsole/plugins-base
  87 install -m 644 \
  88         xenserver/usr_lib_xsconsole_plugins-base_XSFeatureVSwitch.py \
  89                $RPM_BUILD_ROOT/usr/lib/xsconsole/plugins-base/XSFeatureVSwitch.py
  90
  91 install -d -m 755 $RPM_BUILD_ROOT/lib/modules/%{xen_version}/kernel/extra/openvswitch
  92 find datapath/linux-2.6 -name *.ko -exec install -m 755  \{\} $RPM_BUILD_ROOT/lib/modules/%{xen_version}/kernel/extra/openvswitch \;
  93 install xenserver/uuid.py $RPM_BUILD_ROOT/usr/share/openvswitch/python
  94
  95 # Get rid of stuff we don't want to make RPM happy.
  96 rm \
  97     $RPM_BUILD_ROOT/usr/bin/ovs-controller \
  98     $RPM_BUILD_ROOT/usr/bin/ovs-discover \
  99     $RPM_BUILD_ROOT/usr/bin/ovs-kill \
 100     $RPM_BUILD_ROOT/usr/bin/ovs-openflowd \
 101     $RPM_BUILD_ROOT/usr/bin/ovs-pki \
 102     $RPM_BUILD_ROOT/usr/share/man/man8/ovs-controller.8 \
 103     $RPM_BUILD_ROOT/usr/share/man/man8/ovs-discover.8 \
 104     $RPM_BUILD_ROOT/usr/share/man/man8/ovs-kill.8 \
 105     $RPM_BUILD_ROOT/usr/share/man/man8/ovs-openflowd.8 \
 106     $RPM_BUILD_ROOT/usr/share/man/man8/ovs-pki.8
 107
 108 install -d -m 755 $RPM_BUILD_ROOT/var/lib/openvswitch
 109
 110 %clean
 111 rm -rf $RPM_BUILD_ROOT
 112
 113 %post
 114 if [ ! -f /etc/xensource-inventory ]; then
 115     printf "XenSource inventory not present in /etc/xensource-inventory"
 116     exit 1
 117 fi
 118 . /etc/xensource-inventory
 119
 120 if [ "$1" = "1" ]; then
 121     if md5sum -c --status <<EOF
 122 ca141d60061dcfdade73e75abc6529b5  /usr/sbin/brctl
 123 b8e9835862ef1a9cec2a3f477d26c989  /etc/xensource/scripts/vif
 124 51970ad613a3996d5997e18e44db47da  /opt/xensource/libexec/interface-reconfigure
 125 5654c8c36699fcc8744ca9cd5b855414  /usr/sbin/xen-bugtool
 126 EOF
 127     then
 128         printf "\nVerified host scripts from XenServer 5.5.0.\n\n"
 129     elif md5sum -c --status <<EOF
 130 ca141d60061dcfdade73e75abc6529b5  /usr/sbin/brctl
 131 b8e9835862ef1a9cec2a3f477d26c989  /etc/xensource/scripts/vif
 132 51970ad613a3996d5997e18e44db47da  /opt/xensource/libexec/interface-reconfigure
 133 f6519085c2fc5f7bc4eccc294ed62000  /usr/sbin/xen-bugtool
 134 EOF
 135     then
 136         printf "\nVerified host scripts from XenServer 5.5.0-24648p (Update 1)\n"
 137         printf "or 5.5.0-25727p (Update 2).\n\n"
 138     elif md5sum -c --status <<EOF
 139 ca141d60061dcfdade73e75abc6529b5  /usr/sbin/brctl
 140 02cf136237ed85fcbcc1efc15ce0591c  /opt/xensource/libexec/interface-reconfigure
 141 3a192ee70ebf2153c90051b3af95f331  /opt/xensource/libexec/InterfaceReconfigureBridge.py
 142 f71cadf1464caefa7943de0ab47fdd8a  /opt/xensource/libexec/InterfaceReconfigure.py
 143 d70f08f235fb1bfd49a0580e440f15a0  /opt/xensource/libexec/InterfaceReconfigureVswitch.py
 144 f5c85ca825b1e6f5a0845530981cd836  /etc/xensource/scripts/vif
 145 facb851606f82ca2bcc760a4d91bbe33  /usr/sbin/xen-bugtool
 146 EOF
 147     then
 148         printf "\nVerified host scripts from XenServer 5.5.900-29381p.\n\n"
 149     else
 150 cat <<EOF
 151
 152 The original XenServer scripts replaced by this package are not those
 153 of any supported version of XenServer.  This could lead to unexpected
 154 behavior of your server.  Unless you are sure you know what you are
 155 doing, it is highly recommended that you remove this package
 156 immediately after the install completes, which will restore the
 157 XenServer scripts that you were previously using.
 158
 159 EOF
 160     fi
 161 fi
 162
 163 # On XenServer 5.5.0, we need refresh-xs-network-uuids to run whenever
 164 # XAPI starts or restarts.  (On XenServer 5.6.0, XAPI calls the
 165 # "update" method of the vswitch-cfg-update plugin whenever it starts
 166 # or restarts, so this is no longer necessary.)
 167 if test "$PRODUCT_VERSION" = "5.5.0"; then
 168     RNU=/usr/share/openvswitch/scripts/refresh-xs-network-uuids
 169     XSS=/opt/xensource/libexec/xapi-startup-script
 170     if test -e $XSS && (test ! -L $XSS || test "`readlink $XSS`" != $RNU); then
 171         echo "$XSS is already in use, refusing to overwrite"
 172         exit 1
 173     fi
 174     rm -f $XSS
 175     ln -s $RNU $XSS
 176
 177     # If /etc/xensource/network.conf doesn't exist (it was added in 5.6.0),
 178     # then interface-reconfigure will be unhappy when we run it below.
 179     if test ! -e /etc/xensource/network.conf; then
 180         echo bridge > /etc/xensource/network.conf
 181     fi
 182 fi
 183
 184
 185 if test ! -e /var/xapi/network.dbcache; then
 186     if test "$1" = 1; then
 187         printf "Creating xapi database cache...  "
 188     else
 189         printf "warning: Open vSwitch is being re-installed or upgraded,\n"
 190         printf "         but the xapi database cache is missing.\n"
 191         printf "Re-creating xapi database cache...  "
 192     fi
 193
 194     if /usr/share/openvswitch/scripts/interface-reconfigure rewrite; then
 195         printf "done.\n"
 196     else
 197         printf "FAILED\n"
 198         printf "Open vSwitch can only be installed on a XenServer that\n"
 199         printf "has connectivity to xapi on the pool master.  Please\n"
 200         printf "fix connectivity to the pool master, then try again.\n"
 201         exit 1
 202     fi
 203 fi
 204
 205 # Ensure that modprobe will find our modules.
 206 depmod %{xen_version}
 207
 208 if grep -F net.ipv4.conf.all.arp_filter /etc/sysctl.conf >/dev/null 2>&1; then :; else
 209     cat >>/etc/sysctl.conf <<EOF
 210 # This works around an issue in xhad, which binds to a particular
 211 # Ethernet device, which in turn causes ICMP port unreachable messages
 212 # if packets are received are on the wrong interface, which in turn
 213 # can happen if we send out ARP replies on every interface (as Linux
 214 # does by default) instead of just on the interface that has the IP
 215 # address being ARPed for, which this sysctl setting in turn works
 216 # around.
 217 #
 218 # Bug #1378.
 219 net.ipv4.conf.all.arp_filter = 1
 220 EOF
 221 fi
 222
 223 if test ! -e /etc/openvswitch/conf.db; then
 224     install -d -m 755 -o root -g root /etc/openvswitch
 225
 226     # Create ovs-vswitchd config database
 227     ovsdb-tool -vANY:console:emer create /etc/openvswitch/conf.db \
 228             /usr/share/openvswitch/vswitch.ovsschema
 229
 230     # Create initial table in config database
 231     ovsdb-tool -vANY:console:emer transact /etc/openvswitch/conf.db \
 232             '[{"op": "insert", "table": "Open_vSwitch", "row": {}}]' \
 233             > /dev/null
 234 fi
 235
 236 # Create default or update existing /etc/sysconfig/openvswitch.
 237 SYSCONFIG=/etc/sysconfig/openvswitch
 238 TEMPLATE=/usr/share/openvswitch/scripts/sysconfig.template
 239 if [ ! -e $SYSCONFIG ]; then
 240     cp $TEMPLATE $SYSCONFIG
 241 else
 242     for var in $(awk -F'[ :]' '/^# [_A-Z0-9]+:/{print $2}' $TEMPLATE)
 243     do
 244         if ! grep $var $SYSCONFIG >/dev/null 2>&1; then
 245             echo >> $SYSCONFIG
 246             sed -n "/$var:/,/$var=/p" $TEMPLATE >> $SYSCONFIG
 247         fi
 248     done
 249 fi
 250
 251 # Replace XenServer files by our versions.
 252 mkdir -p /usr/lib/openvswitch/xs-original \
 253     || printf "Could not create script backup directory.\n"
 254 for f in \
 255     /opt/xensource/libexec/interface-reconfigure \
 256     /opt/xensource/libexec/InterfaceReconfigure.py \
 257     /opt/xensource/libexec/InterfaceReconfigureBridge.py \
 258     /opt/xensource/libexec/InterfaceReconfigureVswitch.py \
 259     /etc/xensource/scripts/vif \
 260     /usr/sbin/xen-bugtool \
 261     /usr/sbin/brctl
 262 do
 263     s=$(basename "$f")
 264     t=$(readlink "$f")
 265     if [ -f "$f" ] && [ "$t" != "/usr/share/openvswitch/scripts/$s" ]; then
 266         mv "$f" /usr/lib/openvswitch/xs-original/ \
 267             || printf "Could not save original XenServer $s script\n"
 268         ln -s "/usr/share/openvswitch/scripts/$s" "$f" \
 269             || printf "Could not link to Open vSwitch $s script\n"
 270     fi
 271 done
 272
 273 # Ensure all required services are set to run
 274 for s in openvswitch openvswitch-xapi-update; do
 275     if chkconfig --list $s >/dev/null 2>&1; then
 276         chkconfig --del $s || printf "Could not remove $s init script."
 277     fi
 278     chkconfig --add $s || printf "Could not add $s init script."
 279     chkconfig $s on || printf "Could not enable $s init script."
 280 done
 281
 282 # Configure system to use Open vSwitch
 283 echo vswitch > /etc/xensource/network.conf
 284
 285 if [ "$1" = "1" ]; then    # $1 = 2 for upgrade
 286     printf "\nYou MUST reboot the server NOW to complete the change to\n"
 287     printf "Open vSwitch.  Attempts to modify networking on the server\n"
 288     printf "or any hosted VM will fail until after the reboot and could\n"
 289     printf "leave the server in an state requiring manual recovery.\n\n"
 290 else
 291     printf "\nTo use the new Open vSwitch install, you should reboot the\n"
 292     printf "server now.  Failure to do so may result in incorrect operation."
 293     printf "\n\n"
 294 fi
 295
 296 %preun
 297 if [ "$1" = "0" ]; then     # $1 = 1 for upgrade
 298     for s in openvswitch openvswitch-xapi-update; do
 299         chkconfig --del $s || printf "Could not remove $s init script."
 300     done
 301 fi
 302
 303
 304 %postun
 305 if [ "$1" = "0" ]; then     # $1 = 1 for upgrade
 306     . /etc/xensource-inventory
 307     if test "$PRODUCT_VERSION" = "5.5.0"; then
 308         XSS=/opt/xensource/libexec/xapi-startup-script
 309         rm -f $XSS
 310     fi
 311
 312     rm -f /usr/lib/xsconsole/plugins-base/XSFeatureVSwitch.pyc \
 313         /usr/lib/xsconsole/plugins-base/XSFeatureVSwitch.pyo
 314
 315     rm -f /usr/share/openvswitch/scripts/InterfaceReconfigure.pyc \
 316         /usr/share/openvswitch/scripts/InterfaceReconfigure.pyo \
 317         /usr/share/openvswitch/scripts/InterfaceReconfigureBridge.pyc \
 318         /usr/share/openvswitch/scripts/InterfaceReconfigureBridge.pyo \
 319         /usr/share/openvswitch/scripts/InterfaceReconfigureVSwitch.pyc \
 320         /usr/share/openvswitch/scripts/InterfaceReconfigureVSwitch.pyo
 321
 322     # Restore original XenServer scripts
 323     for f in \
 324         /opt/xensource/libexec/interface-reconfigure \
 325         /opt/xensource/libexec/InterfaceReconfigure.py \
 326         /opt/xensource/libexec/InterfaceReconfigureBridge.py \
 327         /opt/xensource/libexec/InterfaceReconfigureVswitch.py \
 328         /etc/xensource/scripts/vif \
 329         /usr/sbin/xen-bugtool \
 330         /usr/sbin/brctl
 331     do
 332         s=$(basename "$f")
 333         if [ ! -f "/usr/lib/openvswitch/xs-original/$s" ]; then
 334             printf "Original XenServer $s script not present in /usr/lib/openvswitch/xs-original\n"
 335             printf "Could not restore original XenServer script.\n"
 336         else
 337             (rm -f "$f" \
 338                 && mv "/usr/lib/openvswitch/xs-original/$s" "$f") \
 339                 || printf "Could not restore original XenServer $s script.\n"
 340         fi
 341     done
 342
 343     # Remove all configuration files
 344     rm -f /etc/openvswitch/conf.db
 345     rm -f /etc/sysconfig/openvswitch
 346     rm -f /etc/openvswitch/vswitchd.cacert
 347     rm -f /var/xapi/network.dbcache
 348
 349     if test "$PRODUCT_VERSION" != "5.5.0"; then
 350         # Configure system to use bridge
 351         echo bridge > /etc/xensource/network.conf
 352     else
 353         # Get rid of network.conf entirely, to make the system pristine.
 354         rm -f /etc/xensource/network.conf
 355     fi
 356
 357     printf "\nYou MUST reboot the server now to complete the change to\n"
 358     printf "standard Xen networking.  Attempts to modify networking on the\n"
 359     printf "server or any hosted VM will fail until after the reboot and\n"
 360     printf "could leave the server in a state requiring manual recovery.\n\n"
 361 fi
 362
 363
 364 %files
 365 %defattr(-,root,root)
 366 /etc/init.d/openvswitch
 367 /etc/init.d/openvswitch-xapi-update
 368 /etc/xapi.d/plugins/openvswitch-cfg-update
 369 /etc/logrotate.d/openvswitch
 370 /etc/profile.d/openvswitch.sh
 371 /lib/modules/%{xen_version}/kernel/extra/openvswitch/openvswitch_mod.ko
 372 /lib/modules/%{xen_version}/kernel/extra/openvswitch/brcompat_mod.ko
 373 /usr/share/openvswitch/python/ovs/__init__.py
 374 /usr/share/openvswitch/python/ovs/daemon.py
 375 /usr/share/openvswitch/python/ovs/db/__init__.py
 376 /usr/share/openvswitch/python/ovs/db/data.py
 377 /usr/share/openvswitch/python/ovs/db/error.py
 378 /usr/share/openvswitch/python/ovs/db/idl.py
 379 /usr/share/openvswitch/python/ovs/db/parser.py
 380 /usr/share/openvswitch/python/ovs/db/schema.py
 381 /usr/share/openvswitch/python/ovs/db/types.py
 382 /usr/share/openvswitch/python/ovs/dirs.py
 383 /usr/share/openvswitch/python/ovs/fatal_signal.py
 384 /usr/share/openvswitch/python/ovs/json.py
 385 /usr/share/openvswitch/python/ovs/jsonrpc.py
 386 /usr/share/openvswitch/python/ovs/ovsuuid.py
 387 /usr/share/openvswitch/python/ovs/poller.py
 388 /usr/share/openvswitch/python/ovs/process.py
 389 /usr/share/openvswitch/python/ovs/reconnect.py
 390 /usr/share/openvswitch/python/ovs/socket_util.py
 391 /usr/share/openvswitch/python/ovs/stream.py
 392 /usr/share/openvswitch/python/ovs/timeval.py
 393 /usr/share/openvswitch/python/ovs/util.py
 394 /usr/share/openvswitch/python/uuid.py
 395 /usr/share/openvswitch/scripts/monitor-external-ids
 396 /usr/share/openvswitch/scripts/refresh-xs-network-uuids
 397 /usr/share/openvswitch/scripts/interface-reconfigure
 398 /usr/share/openvswitch/scripts/InterfaceReconfigure.py
 399 /usr/share/openvswitch/scripts/InterfaceReconfigureBridge.py
 400 /usr/share/openvswitch/scripts/InterfaceReconfigureVswitch.py
 401 /usr/share/openvswitch/scripts/vif
 402 /usr/share/openvswitch/scripts/xen-bugtool
 403 /usr/share/openvswitch/scripts/brctl
 404 /usr/share/openvswitch/scripts/sysconfig.template
 405 /usr/share/openvswitch/vswitch.ovsschema
 406 /usr/sbin/ovs-brcompatd
 407 /usr/sbin/ovs-vswitchd
 408 /usr/sbin/ovsdb-server
 409 /usr/bin/ovs-appctl
 410 /usr/bin/ovs-dpctl
 411 /usr/bin/ovs-ofctl
 412 /usr/bin/ovs-vsctl
 413 /usr/bin/ovsdb-client
 414 /usr/bin/ovsdb-tool
 415 /usr/lib/xsconsole/plugins-base/XSFeatureVSwitch.py
 416 /usr/share/man/man1/ovsdb-client.1.gz
 417 /usr/share/man/man1/ovsdb-server.1.gz
 418 /usr/share/man/man1/ovsdb-tool.1.gz
 419 /usr/share/man/man5/ovs-vswitchd.conf.db.5.gz
 420 /usr/share/man/man8/ovs-appctl.8.gz
 421 /usr/share/man/man8/ovs-brcompatd.8.gz
 422 /usr/share/man/man8/ovs-dpctl.8.gz
 423 /usr/share/man/man8/ovs-ofctl.8.gz
 424 /usr/share/man/man8/ovs-parse-leaks.8.gz
 425 /usr/share/man/man8/ovs-vsctl.8.gz
 426 /usr/share/man/man8/ovs-vswitchd.8.gz
 427 /var/lib/openvswitch
 428 %exclude /usr/lib/xsconsole/plugins-base/*.py[co]
 429 %exclude /usr/share/openvswitch/scripts/*.py[co]
 430 %exclude /usr/share/openvswitch/python/*.py[co]
 431 %exclude /usr/share/openvswitch/python/ovs/*.py[co]
 432 %exclude /usr/share/openvswitch/python/ovs/db/*.py[co]