1 # Spec file for Open vSwitch.
3 # Copyright (C) 2009, 2010 Nicira Networks, Inc.
5 # Copying and distribution of this file, with or without modification,
6 # are permitted in any medium without royalty provided the copyright
7 # notice and this notice are preserved. This file is offered as-is,
8 # without warranty of any kind.
10 # When building, the rpmbuild command line should define
11 # openvswitch_version, xen_version, and build_number using -D arguments.
14 # rpmbuild -D "openvswitch_version 0.8.9~1+build123" -D "xen_version 2.6.18-128.1.1.el5.xs5.1.0.483.1000xen" -D "build_number --with-build-number=123" -bb /usr/src/redhat/SPECS/openvswitch-xen.spec
16 %define version %{openvswitch_version}-%{xen_version}
19 Summary: Virtual switch
20 Group: System Environment/Daemons
21 URL: http://www.openvswitch.org/
22 Vendor: Nicira Networks, Inc.
23 Version: %{openvswitch_version}
25 # The entire source code is ASL 2.0 except datapath/ which is GPLv2
26 License: ASL 2.0 and GPLv2
28 Source: openvswitch-%{openvswitch_version}.tar.gz
29 Buildroot: /tmp/openvswitch-xen-rpm
30 Requires: kernel-xen = %(echo '%{xen_version}' | sed 's/xen$//')
33 Open vSwitch provides standard network bridging functions augmented with
34 support for the OpenFlow protocol for remote per-flow control of
38 %setup -q -n openvswitch-%{openvswitch_version}
41 ./configure --prefix=/usr --sysconfdir=/etc --localstatedir=%{_localstatedir} --with-l26=/lib/modules/%{xen_version}/build --enable-ssl %{build_number}
45 rm -rf $RPM_BUILD_ROOT
46 make install DESTDIR=$RPM_BUILD_ROOT
47 install -d -m 755 $RPM_BUILD_ROOT/etc
48 install -d -m 755 $RPM_BUILD_ROOT/etc/init.d
49 install -m 755 xenserver/etc_init.d_openvswitch \
50 $RPM_BUILD_ROOT/etc/init.d/openvswitch
51 install -m 755 xenserver/etc_init.d_openvswitch-xapi-update \
52 $RPM_BUILD_ROOT/etc/init.d/openvswitch-xapi-update
53 install -d -m 755 $RPM_BUILD_ROOT/etc/sysconfig
54 install -d -m 755 $RPM_BUILD_ROOT/etc/logrotate.d
55 install -m 755 xenserver/etc_logrotate.d_openvswitch \
56 $RPM_BUILD_ROOT/etc/logrotate.d/openvswitch
57 install -d -m 755 $RPM_BUILD_ROOT/etc/profile.d
58 install -m 755 xenserver/etc_profile.d_openvswitch.sh \
59 $RPM_BUILD_ROOT/etc/profile.d/openvswitch.sh
60 install -d -m 755 $RPM_BUILD_ROOT/etc/xapi.d/plugins
61 install -m 755 xenserver/etc_xapi.d_plugins_openvswitch-cfg-update \
62 $RPM_BUILD_ROOT/etc/xapi.d/plugins/openvswitch-cfg-update
63 install -d -m 755 $RPM_BUILD_ROOT/usr/share/openvswitch/scripts
64 install -m 644 vswitchd/vswitch.ovsschema \
65 $RPM_BUILD_ROOT/usr/share/openvswitch/vswitch.ovsschema
66 install -m 755 xenserver/opt_xensource_libexec_interface-reconfigure \
67 $RPM_BUILD_ROOT/usr/share/openvswitch/scripts/interface-reconfigure
68 install -m 644 xenserver/opt_xensource_libexec_InterfaceReconfigure.py \
69 $RPM_BUILD_ROOT/usr/share/openvswitch/scripts/InterfaceReconfigure.py
70 install -m 644 xenserver/opt_xensource_libexec_InterfaceReconfigureBridge.py \
71 $RPM_BUILD_ROOT/usr/share/openvswitch/scripts/InterfaceReconfigureBridge.py
72 install -m 644 xenserver/opt_xensource_libexec_InterfaceReconfigureVswitch.py \
73 $RPM_BUILD_ROOT/usr/share/openvswitch/scripts/InterfaceReconfigureVswitch.py
74 install -m 755 xenserver/etc_xensource_scripts_vif \
75 $RPM_BUILD_ROOT/usr/share/openvswitch/scripts/vif
76 install -m 755 xenserver/usr_share_openvswitch_scripts_refresh-network-uuids \
77 $RPM_BUILD_ROOT/usr/share/openvswitch/scripts/refresh-network-uuids
78 install -m 755 xenserver/usr_sbin_xen-bugtool \
79 $RPM_BUILD_ROOT/usr/share/openvswitch/scripts/xen-bugtool
80 install -m 755 xenserver/usr_sbin_brctl \
81 $RPM_BUILD_ROOT/usr/share/openvswitch/scripts/brctl
82 install -m 755 xenserver/usr_share_openvswitch_scripts_sysconfig.template \
83 $RPM_BUILD_ROOT/usr/share/openvswitch/scripts/sysconfig.template
84 install -d -m 755 $RPM_BUILD_ROOT/usr/lib/xsconsole/plugins-base
86 xenserver/usr_lib_xsconsole_plugins-base_XSFeatureVSwitch.py \
87 $RPM_BUILD_ROOT/usr/lib/xsconsole/plugins-base/XSFeatureVSwitch.py
89 install -d -m 755 $RPM_BUILD_ROOT/lib/modules/%{xen_version}/kernel/extra/openvswitch
90 find datapath/linux-2.6 -name *.ko -exec install -m 755 \{\} $RPM_BUILD_ROOT/lib/modules/%{xen_version}/kernel/extra/openvswitch \;
92 # Get rid of stuff we don't want to make RPM happy.
94 $RPM_BUILD_ROOT/usr/bin/ovs-controller \
95 $RPM_BUILD_ROOT/usr/bin/ovs-discover \
96 $RPM_BUILD_ROOT/usr/bin/ovs-kill \
97 $RPM_BUILD_ROOT/usr/bin/ovs-openflowd \
98 $RPM_BUILD_ROOT/usr/bin/ovs-pki \
99 $RPM_BUILD_ROOT/usr/bin/ovs-wdt \
100 $RPM_BUILD_ROOT/usr/sbin/ovs-monitor \
101 $RPM_BUILD_ROOT/usr/share/man/man8/ovs-controller.8 \
102 $RPM_BUILD_ROOT/usr/share/man/man8/ovs-discover.8 \
103 $RPM_BUILD_ROOT/usr/share/man/man8/ovs-kill.8 \
104 $RPM_BUILD_ROOT/usr/share/man/man8/ovs-openflowd.8 \
105 $RPM_BUILD_ROOT/usr/share/man/man8/ovs-pki.8
107 install -d -m 755 $RPM_BUILD_ROOT/var/lib/openvswitch
110 rm -rf $RPM_BUILD_ROOT
113 if [ ! -f /etc/xensource-inventory ]; then
114 printf "XenSource inventory not present in /etc/xensource-inventory"
117 . /etc/xensource-inventory
119 if [ "$1" = "1" ]; then
120 if md5sum -c --status <<EOF
121 ca141d60061dcfdade73e75abc6529b5 /usr/sbin/brctl
122 b8e9835862ef1a9cec2a3f477d26c989 /etc/xensource/scripts/vif
123 51970ad613a3996d5997e18e44db47da /opt/xensource/libexec/interface-reconfigure
124 5654c8c36699fcc8744ca9cd5b855414 /usr/sbin/xen-bugtool
127 printf "\nVerified host scripts from XenServer 5.5.0.\n\n"
128 elif md5sum -c --status <<EOF
129 ca141d60061dcfdade73e75abc6529b5 /usr/sbin/brctl
130 b8e9835862ef1a9cec2a3f477d26c989 /etc/xensource/scripts/vif
131 51970ad613a3996d5997e18e44db47da /opt/xensource/libexec/interface-reconfigure
132 f6519085c2fc5f7bc4eccc294ed62000 /usr/sbin/xen-bugtool
135 printf "\nVerified host scripts from XenServer 5.5.0-24648p (Update 1)\n"
136 printf "or 5.5.0-25727p (Update 2).\n\n"
137 elif md5sum -c --status <<EOF
138 ca141d60061dcfdade73e75abc6529b5 /usr/sbin/brctl
139 02cf136237ed85fcbcc1efc15ce0591c /opt/xensource/libexec/interface-reconfigure
140 3a192ee70ebf2153c90051b3af95f331 /opt/xensource/libexec/InterfaceReconfigureBridge.py
141 f71cadf1464caefa7943de0ab47fdd8a /opt/xensource/libexec/InterfaceReconfigure.py
142 d70f08f235fb1bfd49a0580e440f15a0 /opt/xensource/libexec/InterfaceReconfigureVswitch.py
143 f5c85ca825b1e6f5a0845530981cd836 /etc/xensource/scripts/vif
144 facb851606f82ca2bcc760a4d91bbe33 /usr/sbin/xen-bugtool
147 printf "\nVerified host scripts from XenServer 5.5.900-29381p.\n\n"
151 The original XenServer scripts replaced by this package are not those
152 of any supported version of XenServer. This could lead to unexpected
153 behavior of your server. Unless you are sure you know what you are
154 doing, it is highly recommended that you remove this package
155 immediately after the install completes, which will restore the
156 XenServer scripts that you were previously using.
162 # On XenServer 5.5.0, we need refresh-network-uuids to run whenever
163 # XAPI starts or restarts. (On XenServer 5.6.0, XAPI calls the
164 # "update" method of the vswitch-cfg-update plugin whenever it starts
165 # or restarts, so this is no longer necessary.)
166 if test "$PRODUCT_VERSION" = "5.5.0"; then
167 RNU=/usr/share/openvswitch/scripts/refresh-network-uuids
168 XSS=/opt/xensource/libexec/xapi-startup-script
169 if test -e $XSS && (test ! -L $XSS || test "`readlink $XSS`" != $RNU); then
170 echo "$XSS is already in use, refusing to overwrite"
176 # If /etc/xensource/network.conf doesn't exist (it was added in 5.6.0),
177 # then interface-reconfigure will be unhappy when we run it below.
178 if test ! -e /etc/xensource/network.conf; then
179 echo bridge > /etc/xensource/network.conf
184 if test ! -e /var/xapi/network.dbcache; then
185 if test "$1" = 1; then
186 printf "Creating xapi database cache... "
188 printf "warning: Open vSwitch is being re-installed or upgraded,\n"
189 printf " but the xapi database cache is missing.\n"
190 printf "Re-creating xapi database cache... "
193 if /usr/share/openvswitch/scripts/interface-reconfigure rewrite; then
197 printf "Open vSwitch can only be installed on a XenServer that\n"
198 printf "has connectivity to xapi on the pool master. Please\n"
199 printf "fix connectivity to the pool master, then try again.\n"
204 # Ensure that modprobe will find our modules.
205 depmod %{xen_version}
207 if grep -F net.ipv4.conf.all.arp_filter /etc/sysctl.conf >/dev/null 2>&1; then :; else
208 cat >>/etc/sysctl.conf <<EOF
209 # This works around an issue in xhad, which binds to a particular
210 # Ethernet device, which in turn causes ICMP port unreachable messages
211 # if packets are received are on the wrong interface, which in turn
212 # can happen if we send out ARP replies on every interface (as Linux
213 # does by default) instead of just on the interface that has the IP
214 # address being ARPed for, which this sysctl setting in turn works
218 net.ipv4.conf.all.arp_filter = 1
222 if test ! -e /etc/openvswitch/conf.db; then
223 install -d -m 755 -o root -g root /etc/openvswitch
225 # Create ovs-vswitchd config database
226 ovsdb-tool -vANY:console:emer create /etc/openvswitch/conf.db \
227 /usr/share/openvswitch/vswitch.ovsschema
229 # Create initial table in config database
230 ovsdb-tool -vANY:console:emer transact /etc/openvswitch/conf.db \
231 '[{"op": "insert", "table": "Open_vSwitch", "row": {}}]' \
235 # Create default or update existing /etc/sysconfig/openvswitch.
236 SYSCONFIG=/etc/sysconfig/openvswitch
237 TEMPLATE=/usr/share/openvswitch/scripts/sysconfig.template
238 if [ ! -e $SYSCONFIG ]; then
239 cp $TEMPLATE $SYSCONFIG
241 for var in $(awk -F'[ :]' '/^# [_A-Z0-9]+:/{print $2}' $TEMPLATE)
243 if ! grep $var $SYSCONFIG >/dev/null 2>&1; then
245 sed -n "/$var:/,/$var=/p" $TEMPLATE >> $SYSCONFIG
250 # Replace XenServer files by our versions.
251 mkdir -p /usr/lib/openvswitch/xs-original \
252 || printf "Could not create script backup directory.\n"
254 /opt/xensource/libexec/interface-reconfigure \
255 /opt/xensource/libexec/InterfaceReconfigure.py \
256 /opt/xensource/libexec/InterfaceReconfigureBridge.py \
257 /opt/xensource/libexec/InterfaceReconfigureVswitch.py \
258 /etc/xensource/scripts/vif \
259 /usr/sbin/xen-bugtool \
264 if [ -f "$f" ] && [ "$t" != "/usr/share/openvswitch/scripts/$s" ]; then
265 mv "$f" /usr/lib/openvswitch/xs-original/ \
266 || printf "Could not save original XenServer $s script\n"
267 ln -s "/usr/share/openvswitch/scripts/$s" "$f" \
268 || printf "Could not link to Open vSwitch $s script\n"
272 # Ensure all required services are set to run
273 for s in openvswitch openvswitch-xapi-update; do
274 if chkconfig --list $s >/dev/null 2>&1; then
275 chkconfig --del $s || printf "Could not remove $s init script."
277 chkconfig --add $s || printf "Could not add $s init script."
278 chkconfig $s on || printf "Could not enable $s init script."
281 # Configure system to use Open vSwitch
282 echo vswitch > /etc/xensource/network.conf
284 if [ "$1" = "1" ]; then # $1 = 2 for upgrade
285 printf "\nYou MUST reboot the server NOW to complete the change to\n"
286 printf "Open vSwitch. Attempts to modify networking on the server\n"
287 printf "or any hosted VM will fail until after the reboot and could\n"
288 printf "leave the server in an state requiring manual recovery.\n\n"
290 printf "\nTo use the new Open vSwitch install, you should reboot the\n"
291 printf "server now. Failure to do so may result in incorrect operation."
296 if [ "$1" = "0" ]; then # $1 = 1 for upgrade
297 for s in openvswitch openvswitch-xapi-update; do
298 chkconfig --del $s || printf "Could not remove $s init script."
304 if [ "$1" = "0" ]; then # $1 = 1 for upgrade
305 . /etc/xensource-inventory
306 if test "$PRODUCT_VERSION" = "5.5.0"; then
307 XSS=/opt/xensource/libexec/xapi-startup-script
311 rm -f /usr/lib/xsconsole/plugins-base/XSFeatureVSwitch.pyc \
312 /usr/lib/xsconsole/plugins-base/XSFeatureVSwitch.pyo
314 rm -f /usr/share/openvswitch/scripts/InterfaceReconfigure.pyc \
315 /usr/share/openvswitch/scripts/InterfaceReconfigure.pyo \
316 /usr/share/openvswitch/scripts/InterfaceReconfigureBridge.pyc \
317 /usr/share/openvswitch/scripts/InterfaceReconfigureBridge.pyo \
318 /usr/share/openvswitch/scripts/InterfaceReconfigureVSwitch.pyc \
319 /usr/share/openvswitch/scripts/InterfaceReconfigureVSwitch.pyo
321 # Restore original XenServer scripts
323 /opt/xensource/libexec/interface-reconfigure \
324 /opt/xensource/libexec/InterfaceReconfigure.py \
325 /opt/xensource/libexec/InterfaceReconfigureBridge.py \
326 /opt/xensource/libexec/InterfaceReconfigureVswitch.py \
327 /etc/xensource/scripts/vif \
328 /usr/sbin/xen-bugtool \
332 if [ ! -f "/usr/lib/openvswitch/xs-original/$s" ]; then
333 printf "Original XenServer $s script not present in /usr/lib/openvswitch/xs-original\n"
334 printf "Could not restore original XenServer script.\n"
337 && mv "/usr/lib/openvswitch/xs-original/$s" "$f") \
338 || printf "Could not restore original XenServer $s script.\n"
342 # Remove all configuration files
343 rm -f /etc/openvswitch/conf.db
344 rm -f /etc/sysconfig/openvswitch
345 rm -f /etc/openvswitch/vswitchd.cacert
346 rm -f /var/xapi/network.dbcache
348 if test "$PRODUCT_VERSION" != "5.5.0"; then
349 # Configure system to use bridge
350 echo bridge > /etc/xensource/network.conf
352 # Get rid of network.conf entirely, to make the system pristine.
353 rm -f /etc/xensource/network.conf
356 printf "\nYou MUST reboot the server now to complete the change to\n"
357 printf "standard Xen networking. Attempts to modify networking on the\n"
358 printf "server or any hosted VM will fail until after the reboot and\n"
359 printf "could leave the server in a state requiring manual recovery.\n\n"
364 %defattr(-,root,root)
365 /etc/init.d/openvswitch
366 /etc/init.d/openvswitch-xapi-update
367 /etc/xapi.d/plugins/openvswitch-cfg-update
368 /etc/logrotate.d/openvswitch
369 /etc/profile.d/openvswitch.sh
370 /lib/modules/%{xen_version}/kernel/extra/openvswitch/openvswitch_mod.ko
371 /lib/modules/%{xen_version}/kernel/extra/openvswitch/brcompat_mod.ko
372 /usr/share/openvswitch/scripts/refresh-network-uuids
373 /usr/share/openvswitch/scripts/interface-reconfigure
374 /usr/share/openvswitch/scripts/InterfaceReconfigure.py
375 /usr/share/openvswitch/scripts/InterfaceReconfigureBridge.py
376 /usr/share/openvswitch/scripts/InterfaceReconfigureVswitch.py
377 /usr/share/openvswitch/scripts/vif
378 /usr/share/openvswitch/scripts/xen-bugtool
379 /usr/share/openvswitch/scripts/brctl
380 /usr/share/openvswitch/scripts/sysconfig.template
381 /usr/share/openvswitch/vswitch.ovsschema
382 /usr/sbin/ovs-brcompatd
383 /usr/sbin/ovs-vswitchd
384 /usr/sbin/ovsdb-server
389 /usr/bin/ovsdb-client
391 /usr/lib/xsconsole/plugins-base/XSFeatureVSwitch.py
392 /usr/share/man/man1/ovsdb-client.1.gz
393 /usr/share/man/man1/ovsdb-server.1.gz
394 /usr/share/man/man1/ovsdb-tool.1.gz
395 /usr/share/man/man5/ovs-vswitchd.conf.db.5.gz
396 /usr/share/man/man8/ovs-appctl.8.gz
397 /usr/share/man/man8/ovs-brcompatd.8.gz
398 /usr/share/man/man8/ovs-dpctl.8.gz
399 /usr/share/man/man8/ovs-ofctl.8.gz
400 /usr/share/man/man8/ovs-vsctl.8.gz
401 /usr/share/man/man8/ovs-vswitchd.8.gz
403 %exclude /usr/lib/xsconsole/plugins-base/*.pyc
404 %exclude /usr/lib/xsconsole/plugins-base/*.pyo
405 %exclude /usr/share/openvswitch/scripts/*.pyc
406 %exclude /usr/share/openvswitch/scripts/*.pyo