1 # Spec file for Open vSwitch.
3 # Copyright (C) 2009, 2010 Nicira Networks, Inc.
5 # Copying and distribution of this file, with or without modification,
6 # are permitted in any medium without royalty provided the copyright
7 # notice and this notice are preserved. This file is offered as-is,
8 # without warranty of any kind.
10 # When building, the rpmbuild command line should define
11 # openvswitch_version, xen_version, and build_number using -D arguments.
14 # rpmbuild -D "openvswitch_version 0.8.9~1+build123" -D "xen_version 2.6.18-128.1.1.el5.xs5.1.0.483.1000xen" -D "build_number --with-build-number=123" -bb /usr/src/redhat/SPECS/openvswitch-xen.spec
16 %define version %{openvswitch_version}-%{xen_version}
19 Summary: Virtual switch
20 Group: System Environment/Daemons
21 URL: http://www.openvswitch.org/
22 Vendor: Nicira Networks, Inc.
23 Version: %{openvswitch_version}
25 # The entire source code is ASL 2.0 except datapath/ which is GPLv2
26 License: ASL 2.0 and GPLv2
28 Source: openvswitch-%{openvswitch_version}.tar.gz
29 Buildroot: /tmp/openvswitch-xen-rpm
30 Requires: kernel-xen = %(echo '%{xen_version}' | sed 's/xen$//')
33 Open vSwitch provides standard network bridging functions augmented with
34 support for the OpenFlow protocol for remote per-flow control of
38 %setup -q -n openvswitch-%{openvswitch_version}
41 ./configure --prefix=/usr --sysconfdir=/etc --localstatedir=%{_localstatedir} --with-l26=/lib/modules/%{xen_version}/build --enable-ssl %{build_number}
45 rm -rf $RPM_BUILD_ROOT
46 make install DESTDIR=$RPM_BUILD_ROOT
47 install -d -m 755 $RPM_BUILD_ROOT/etc
48 install -d -m 755 $RPM_BUILD_ROOT/etc/init.d
49 install -m 755 xenserver/etc_init.d_openvswitch \
50 $RPM_BUILD_ROOT/etc/init.d/openvswitch
51 install -m 755 xenserver/etc_init.d_openvswitch-xapi-update \
52 $RPM_BUILD_ROOT/etc/init.d/openvswitch-xapi-update
53 install -d -m 755 $RPM_BUILD_ROOT/etc/sysconfig
54 install -d -m 755 $RPM_BUILD_ROOT/etc/logrotate.d
55 install -m 755 xenserver/etc_logrotate.d_openvswitch \
56 $RPM_BUILD_ROOT/etc/logrotate.d/openvswitch
57 install -d -m 755 $RPM_BUILD_ROOT/etc/profile.d
58 install -m 755 xenserver/etc_profile.d_openvswitch.sh \
59 $RPM_BUILD_ROOT/etc/profile.d/openvswitch.sh
60 install -d -m 755 $RPM_BUILD_ROOT/etc/xapi.d/plugins
61 install -m 755 xenserver/etc_xapi.d_plugins_openvswitch-cfg-update \
62 $RPM_BUILD_ROOT/etc/xapi.d/plugins/openvswitch-cfg-update
63 install -d -m 755 $RPM_BUILD_ROOT/usr/share/openvswitch/scripts
64 install -m 644 vswitchd/vswitch.ovsschema \
65 $RPM_BUILD_ROOT/usr/share/openvswitch/vswitch.ovsschema
66 install -m 755 xenserver/opt_xensource_libexec_interface-reconfigure \
67 $RPM_BUILD_ROOT/usr/share/openvswitch/scripts/interface-reconfigure
68 install -m 644 xenserver/opt_xensource_libexec_InterfaceReconfigure.py \
69 $RPM_BUILD_ROOT/usr/share/openvswitch/scripts/InterfaceReconfigure.py
70 install -m 644 xenserver/opt_xensource_libexec_InterfaceReconfigureBridge.py \
71 $RPM_BUILD_ROOT/usr/share/openvswitch/scripts/InterfaceReconfigureBridge.py
72 install -m 644 xenserver/opt_xensource_libexec_InterfaceReconfigureVswitch.py \
73 $RPM_BUILD_ROOT/usr/share/openvswitch/scripts/InterfaceReconfigureVswitch.py
74 install -m 755 xenserver/etc_xensource_scripts_vif \
75 $RPM_BUILD_ROOT/usr/share/openvswitch/scripts/vif
76 install -m 755 xenserver/usr_share_openvswitch_scripts_refresh-network-uuids \
77 $RPM_BUILD_ROOT/usr/share/openvswitch/scripts/refresh-network-uuids
78 install -m 755 xenserver/usr_sbin_xen-bugtool \
79 $RPM_BUILD_ROOT/usr/share/openvswitch/scripts/xen-bugtool
80 install -m 755 xenserver/usr_sbin_brctl \
81 $RPM_BUILD_ROOT/usr/share/openvswitch/scripts/brctl
82 install -m 755 xenserver/ovs-xenserverd $RPM_BUILD_ROOT/usr/sbin/
83 install -m 755 xenserver/usr_share_openvswitch_scripts_sysconfig.template \
84 $RPM_BUILD_ROOT/usr/share/openvswitch/scripts/sysconfig.template
85 install -d -m 755 $RPM_BUILD_ROOT/usr/lib/xsconsole/plugins-base
87 xenserver/usr_lib_xsconsole_plugins-base_XSFeatureVSwitch.py \
88 $RPM_BUILD_ROOT/usr/lib/xsconsole/plugins-base/XSFeatureVSwitch.py
90 install -d -m 755 $RPM_BUILD_ROOT/lib/modules/%{xen_version}/kernel/extra/openvswitch
91 find datapath/linux-2.6 -name *.ko -exec install -m 755 \{\} $RPM_BUILD_ROOT/lib/modules/%{xen_version}/kernel/extra/openvswitch \;
93 # Get rid of stuff we don't want to make RPM happy.
95 $RPM_BUILD_ROOT/usr/bin/ovs-controller \
96 $RPM_BUILD_ROOT/usr/bin/ovs-discover \
97 $RPM_BUILD_ROOT/usr/bin/ovs-kill \
98 $RPM_BUILD_ROOT/usr/bin/ovs-openflowd \
99 $RPM_BUILD_ROOT/usr/bin/ovs-pki \
100 $RPM_BUILD_ROOT/usr/bin/ovs-wdt \
101 $RPM_BUILD_ROOT/usr/sbin/ovs-monitor \
102 $RPM_BUILD_ROOT/usr/share/man/man8/ovs-controller.8 \
103 $RPM_BUILD_ROOT/usr/share/man/man8/ovs-discover.8 \
104 $RPM_BUILD_ROOT/usr/share/man/man8/ovs-kill.8 \
105 $RPM_BUILD_ROOT/usr/share/man/man8/ovs-openflowd.8 \
106 $RPM_BUILD_ROOT/usr/share/man/man8/ovs-pki.8
108 install -d -m 755 $RPM_BUILD_ROOT/var/lib/openvswitch
111 rm -rf $RPM_BUILD_ROOT
114 if [ ! -f /etc/xensource-inventory ]; then
115 printf "XenSource inventory not present in /etc/xensource-inventory"
119 if [ "$1" = "1" ]; then
120 if md5sum -c --status <<EOF
121 ca141d60061dcfdade73e75abc6529b5 /usr/sbin/brctl
122 b8e9835862ef1a9cec2a3f477d26c989 /etc/xensource/scripts/vif
123 51970ad613a3996d5997e18e44db47da /opt/xensource/libexec/interface-reconfigure
124 5654c8c36699fcc8744ca9cd5b855414 /usr/sbin/xen-bugtool
127 printf "\nVerified host scripts from XenServer 5.5.0.\n\n"
128 elif md5sum -c --status <<EOF
129 ca141d60061dcfdade73e75abc6529b5 /usr/sbin/brctl
130 b8e9835862ef1a9cec2a3f477d26c989 /etc/xensource/scripts/vif
131 51970ad613a3996d5997e18e44db47da /opt/xensource/libexec/interface-reconfigure
132 f6519085c2fc5f7bc4eccc294ed62000 /usr/sbin/xen-bugtool
135 printf "\nVerified host scripts from XenServer 5.5.0-24648p (Update 1)\n"
136 printf "or 5.5.0-25727p (Update 2).\n\n"
137 elif md5sum -c --status <<EOF
138 ca141d60061dcfdade73e75abc6529b5 /usr/sbin/brctl
139 02cf136237ed85fcbcc1efc15ce0591c /opt/xensource/libexec/interface-reconfigure
140 3a192ee70ebf2153c90051b3af95f331 /opt/xensource/libexec/InterfaceReconfigureBridge.py
141 f71cadf1464caefa7943de0ab47fdd8a /opt/xensource/libexec/InterfaceReconfigure.py
142 d70f08f235fb1bfd49a0580e440f15a0 /opt/xensource/libexec/InterfaceReconfigureVswitch.py
143 f5c85ca825b1e6f5a0845530981cd836 /etc/xensource/scripts/vif
144 facb851606f82ca2bcc760a4d91bbe33 /usr/sbin/xen-bugtool
147 printf "\nVerified host scripts from XenServer 5.5.900-29381p.\n\n"
151 The original XenServer scripts replaced by this package are not those
152 of any supported version of XenServer. This could lead to unexpected
153 behavior of your server. Unless you are sure you know what you are
154 doing, it is highly recommended that you remove this package
155 immediately after the install completes, which will restore the
156 XenServer scripts that you were previously using.
162 if test ! -e /var/xapi/network.dbcache; then
163 if test "$1" = 1; then
164 printf "Creating xapi database cache... "
166 printf "warning: Open vSwitch is being re-installed or upgraded,\n"
167 printf " but the xapi database cache is missing.\n"
168 printf "Re-creating xapi database cache... "
171 if /usr/share/openvswitch/scripts/interface-reconfigure rewrite; then
175 printf "Open vSwitch can only be installed on a XenServer that\n"
176 printf "has connectivity to xapi on the pool master. Please\n"
177 printf "fix connectivity to the pool master, then try again.\n"
182 # Ensure that modprobe will find our modules.
183 depmod %{xen_version}
185 if grep -F net.ipv4.conf.all.arp_filter /etc/sysctl.conf >/dev/null 2>&1; then :; else
186 cat >>/etc/sysctl.conf <<EOF
187 # This works around an issue in xhad, which binds to a particular
188 # Ethernet device, which in turn causes ICMP port unreachable messages
189 # if packets are received are on the wrong interface, which in turn
190 # can happen if we send out ARP replies on every interface (as Linux
191 # does by default) instead of just on the interface that has the IP
192 # address being ARPed for, which this sysctl setting in turn works
196 net.ipv4.conf.all.arp_filter = 1
200 if test ! -e /etc/openvswitch/conf.db; then
201 install -d -m 755 -o root -g root /etc/openvswitch
203 # Create ovs-vswitchd config database
204 ovsdb-tool -vANY:console:emer create /etc/openvswitch/conf.db \
205 /usr/share/openvswitch/vswitch.ovsschema
207 # Create initial table in config database
208 ovsdb-tool -vANY:console:emer transact /etc/openvswitch/conf.db \
209 '[{"op": "insert", "table": "Open_vSwitch", "row": {}}]' \
213 # Create default or update existing /etc/sysconfig/openvswitch.
214 SYSCONFIG=/etc/sysconfig/openvswitch
215 TEMPLATE=/usr/share/openvswitch/scripts/sysconfig.template
216 if [ ! -e $SYSCONFIG ]; then
217 cp $TEMPLATE $SYSCONFIG
219 for var in $(awk -F'[ :]' '/^# [_A-Z0-9]+:/{print $2}' $TEMPLATE)
221 if ! grep $var $SYSCONFIG >/dev/null 2>&1; then
223 sed -n "/$var:/,/$var=/p" $TEMPLATE >> $SYSCONFIG
228 # Replace XenServer files by our versions.
229 mkdir -p /usr/lib/openvswitch/xs-original \
230 || printf "Could not create script backup directory.\n"
232 /opt/xensource/libexec/interface-reconfigure \
233 /opt/xensource/libexec/InterfaceReconfigure.py \
234 /opt/xensource/libexec/InterfaceReconfigureBridge.py \
235 /opt/xensource/libexec/InterfaceReconfigureVswitch.py \
236 /etc/xensource/scripts/vif \
237 /usr/sbin/xen-bugtool \
242 if [ -f "$f" ] && [ "$t" != "/usr/share/openvswitch/scripts/$s" ]; then
243 mv "$f" /usr/lib/openvswitch/xs-original/ \
244 || printf "Could not save original XenServer $s script\n"
245 ln -s "/usr/share/openvswitch/scripts/$s" "$f" \
246 || printf "Could not link to Open vSwitch $s script\n"
250 # Ensure all required services are set to run
251 for s in openvswitch openvswitch-xapi-update; do
252 if chkconfig --list $s >/dev/null 2>&1; then
253 chkconfig --del $s || printf "Could not remove $s init script."
255 chkconfig --add $s || printf "Could not add $s init script."
256 chkconfig $s on || printf "Could not enable $s init script."
259 # Configure system to use Open vSwitch
260 echo vswitch > /etc/xensource/network.conf
262 if [ "$1" = "1" ]; then # $1 = 2 for upgrade
263 printf "\nYou MUST reboot the server NOW to complete the change to\n"
264 printf "Open vSwitch. Attempts to modify networking on the server\n"
265 printf "or any hosted VM will fail until after the reboot and could\n"
266 printf "leave the server in an state requiring manual recovery.\n\n"
268 printf "\nTo use the new Open vSwitch install, you should reboot the\n"
269 printf "server now. Failure to do so may result in incorrect operation."
274 if [ "$1" = "0" ]; then # $1 = 1 for upgrade
275 for s in openvswitch openvswitch-xapi-update; do
276 chkconfig --del $s || printf "Could not remove $s init script."
282 if [ "$1" = "0" ]; then # $1 = 1 for upgrade
284 rm -f /usr/lib/xsconsole/plugins-base/XSFeatureVSwitch.pyc \
285 /usr/lib/xsconsole/plugins-base/XSFeatureVSwitch.pyo
287 rm -f /usr/share/openvswitch/scripts/InterfaceReconfigure.pyc \
288 /usr/share/openvswitch/scripts/InterfaceReconfigure.pyo \
289 /usr/share/openvswitch/scripts/InterfaceReconfigureBridge.pyc \
290 /usr/share/openvswitch/scripts/InterfaceReconfigureBridge.pyo \
291 /usr/share/openvswitch/scripts/InterfaceReconfigureVSwitch.pyc \
292 /usr/share/openvswitch/scripts/InterfaceReconfigureVSwitch.pyo
294 # Restore original XenServer scripts
296 /opt/xensource/libexec/interface-reconfigure \
297 /opt/xensource/libexec/InterfaceReconfigure.py \
298 /opt/xensource/libexec/InterfaceReconfigureBridge.py \
299 /opt/xensource/libexec/InterfaceReconfigureVswitch.py \
300 /etc/xensource/scripts/vif \
301 /usr/sbin/xen-bugtool \
305 if [ ! -f "/usr/lib/openvswitch/xs-original/$s" ]; then
306 printf "Original XenServer $s script not present in /usr/lib/openvswitch/xs-original\n"
307 printf "Could not restore original XenServer script.\n"
310 && mv "/usr/lib/openvswitch/xs-original/$s" "$f") \
311 || printf "Could not restore original XenServer $s script.\n"
315 # Remove all configuration files
316 rm -f /etc/openvswitch/conf.db
317 rm -f /etc/sysconfig/openvswitch
318 rm -f /etc/openvswitch/vswitchd.cacert
319 rm -f /var/xapi/network.dbcache
321 # Configure system to use bridge
322 echo bridge > /etc/xensource/network.conf
324 printf "\nYou MUST reboot the server now to complete the change to\n"
325 printf "standard Xen networking. Attempts to modify networking on the\n"
326 printf "server or any hosted VM will fail until after the reboot and\n"
327 printf "could leave the server in a state requiring manual recovery.\n\n"
332 %defattr(-,root,root)
333 /etc/init.d/openvswitch
334 /etc/init.d/openvswitch-xapi-update
335 /etc/xapi.d/plugins/openvswitch-cfg-update
336 /etc/logrotate.d/openvswitch
337 /etc/profile.d/openvswitch.sh
338 /lib/modules/%{xen_version}/kernel/extra/openvswitch/openvswitch_mod.ko
339 /lib/modules/%{xen_version}/kernel/extra/openvswitch/brcompat_mod.ko
340 %if %(echo '%{xen_version}'|awk -F"[.-]" '{if ($3==18) print 1; else print 0;}')
341 /lib/modules/%{xen_version}/kernel/extra/openvswitch/veth_mod.ko
343 /usr/share/openvswitch/scripts/refresh-network-uuids
344 /usr/share/openvswitch/scripts/interface-reconfigure
345 /usr/share/openvswitch/scripts/InterfaceReconfigure.py
346 /usr/share/openvswitch/scripts/InterfaceReconfigureBridge.py
347 /usr/share/openvswitch/scripts/InterfaceReconfigureVswitch.py
348 /usr/share/openvswitch/scripts/vif
349 /usr/share/openvswitch/scripts/xen-bugtool
350 /usr/share/openvswitch/scripts/brctl
351 /usr/share/openvswitch/scripts/sysconfig.template
352 /usr/share/openvswitch/vswitch.ovsschema
353 /usr/sbin/ovs-brcompatd
354 /usr/sbin/ovs-vswitchd
355 /usr/sbin/ovs-xenserverd
356 /usr/sbin/ovsdb-server
361 /usr/bin/ovsdb-client
363 /usr/lib/xsconsole/plugins-base/XSFeatureVSwitch.py
364 /usr/share/man/man1/ovsdb-client.1.gz
365 /usr/share/man/man1/ovsdb-server.1.gz
366 /usr/share/man/man1/ovsdb-tool.1.gz
367 /usr/share/man/man5/ovs-vswitchd.conf.db.5.gz
368 /usr/share/man/man8/ovs-appctl.8.gz
369 /usr/share/man/man8/ovs-brcompatd.8.gz
370 /usr/share/man/man8/ovs-dpctl.8.gz
371 /usr/share/man/man8/ovs-ofctl.8.gz
372 /usr/share/man/man8/ovs-vsctl.8.gz
373 /usr/share/man/man8/ovs-vswitchd.8.gz
374 /usr/share/man/man8/ovs-xenserverd.8.gz
376 %exclude /usr/lib/xsconsole/plugins-base/*.pyc
377 %exclude /usr/lib/xsconsole/plugins-base/*.pyo
378 %exclude /usr/share/openvswitch/scripts/*.pyc
379 %exclude /usr/share/openvswitch/scripts/*.pyo