1 # Spec file for Open vSwitch.
3 # Copyright (C) 2009, 2010 Nicira Networks, Inc.
5 # Copying and distribution of this file, with or without modification,
6 # are permitted in any medium without royalty provided the copyright
7 # notice and this notice are preserved. This file is offered as-is,
8 # without warranty of any kind.
10 # When building, the rpmbuild command line should define
11 # openvswitch_version, xen_version, and build_number using -D arguments.
14 # rpmbuild -D "openvswitch_version 0.8.9~1+build123" -D "xen_version 2.6.18-128.1.1.el5.xs5.1.0.483.1000xen" -D "build_number --with-build-number=123" -bb /usr/src/redhat/SPECS/openvswitch-xen.spec
16 %define version %{openvswitch_version}-%{xen_version}
19 Summary: Virtual switch
20 Group: System Environment/Daemons
21 URL: http://www.openvswitch.org/
22 Vendor: Nicira Networks, Inc.
23 Version: %{openvswitch_version}
25 # The entire source code is ASL 2.0 except datapath/ which is GPLv2
26 License: ASL 2.0 and GPLv2
28 Source: openvswitch-%{openvswitch_version}.tar.gz
29 Buildroot: /tmp/openvswitch-xen-rpm
30 Requires: kernel-xen = %(echo '%{xen_version}' | sed 's/xen$//')
33 Open vSwitch provides standard network bridging functions augmented with
34 support for the OpenFlow protocol for remote per-flow control of
38 %setup -q -n openvswitch-%{openvswitch_version}
41 ./configure --prefix=/usr --sysconfdir=/etc --localstatedir=%{_localstatedir} --with-l26=/lib/modules/%{xen_version}/build --enable-ssl %{build_number}
45 rm -rf $RPM_BUILD_ROOT
46 make install DESTDIR=$RPM_BUILD_ROOT
47 install -d -m 755 $RPM_BUILD_ROOT/etc
48 install -d -m 755 $RPM_BUILD_ROOT/etc/init.d
49 install -m 755 xenserver/etc_init.d_openvswitch \
50 $RPM_BUILD_ROOT/etc/init.d/openvswitch
51 install -m 755 xenserver/etc_init.d_openvswitch-xapi-update \
52 $RPM_BUILD_ROOT/etc/init.d/openvswitch-xapi-update
53 install -d -m 755 $RPM_BUILD_ROOT/etc/sysconfig
54 install -d -m 755 $RPM_BUILD_ROOT/etc/logrotate.d
55 install -m 755 xenserver/etc_logrotate.d_openvswitch \
56 $RPM_BUILD_ROOT/etc/logrotate.d/openvswitch
57 install -d -m 755 $RPM_BUILD_ROOT/etc/profile.d
58 install -m 755 xenserver/etc_profile.d_openvswitch.sh \
59 $RPM_BUILD_ROOT/etc/profile.d/openvswitch.sh
60 install -d -m 755 $RPM_BUILD_ROOT/etc/xapi.d/plugins
61 install -m 755 xenserver/etc_xapi.d_plugins_openvswitch-cfg-update \
62 $RPM_BUILD_ROOT/etc/xapi.d/plugins/openvswitch-cfg-update
63 install -d -m 755 $RPM_BUILD_ROOT/usr/share/openvswitch/scripts
64 install -m 644 vswitchd/vswitch.ovsschema \
65 $RPM_BUILD_ROOT/usr/share/openvswitch/vswitch.ovsschema
66 install -m 755 xenserver/opt_xensource_libexec_interface-reconfigure \
67 $RPM_BUILD_ROOT/usr/share/openvswitch/scripts/interface-reconfigure
68 install -m 644 xenserver/opt_xensource_libexec_InterfaceReconfigure.py \
69 $RPM_BUILD_ROOT/usr/share/openvswitch/scripts/InterfaceReconfigure.py
70 install -m 644 xenserver/opt_xensource_libexec_InterfaceReconfigureBridge.py \
71 $RPM_BUILD_ROOT/usr/share/openvswitch/scripts/InterfaceReconfigureBridge.py
72 install -m 644 xenserver/opt_xensource_libexec_InterfaceReconfigureVswitch.py \
73 $RPM_BUILD_ROOT/usr/share/openvswitch/scripts/InterfaceReconfigureVswitch.py
74 install -m 755 xenserver/etc_xensource_scripts_vif \
75 $RPM_BUILD_ROOT/usr/share/openvswitch/scripts/vif
76 install -m 755 xenserver/usr_share_openvswitch_scripts_refresh-network-uuids \
77 $RPM_BUILD_ROOT/usr/share/openvswitch/scripts/refresh-network-uuids
78 install -m 755 xenserver/usr_sbin_xen-bugtool \
79 $RPM_BUILD_ROOT/usr/share/openvswitch/scripts/xen-bugtool
80 install -m 755 xenserver/usr_sbin_brctl \
81 $RPM_BUILD_ROOT/usr/share/openvswitch/scripts/brctl
82 install -m 755 xenserver/usr_share_openvswitch_scripts_sysconfig.template \
83 $RPM_BUILD_ROOT/usr/share/openvswitch/scripts/sysconfig.template
85 xenserver/usr_lib_xsconsole_plugins-base_XSFeatureVSwitch.py \
86 $RPM_BUILD_ROOT/usr/share/openvswitch/scripts/XSFeatureVSwitch.py
88 install -d -m 755 $RPM_BUILD_ROOT/lib/modules/%{xen_version}/kernel/net/openvswitch
89 find datapath/linux-2.6 -name *.ko -exec install -m 755 \{\} $RPM_BUILD_ROOT/lib/modules/%{xen_version}/kernel/net/openvswitch \;
91 # Get rid of stuff we don't want to make RPM happy.
93 $RPM_BUILD_ROOT/usr/bin/ovs-controller \
94 $RPM_BUILD_ROOT/usr/bin/ovs-discover \
95 $RPM_BUILD_ROOT/usr/bin/ovs-kill \
96 $RPM_BUILD_ROOT/usr/bin/ovs-openflowd \
97 $RPM_BUILD_ROOT/usr/bin/ovs-pki \
98 $RPM_BUILD_ROOT/usr/bin/ovs-wdt \
99 $RPM_BUILD_ROOT/usr/sbin/ovs-monitor \
100 $RPM_BUILD_ROOT/usr/share/man/man8/ovs-controller.8 \
101 $RPM_BUILD_ROOT/usr/share/man/man8/ovs-discover.8 \
102 $RPM_BUILD_ROOT/usr/share/man/man8/ovs-kill.8 \
103 $RPM_BUILD_ROOT/usr/share/man/man8/ovs-openflowd.8 \
104 $RPM_BUILD_ROOT/usr/share/man/man8/ovs-pki.8
105 rm -f $RPM_BUILD_ROOT/lib/modules/%{xen_version}/kernel/net/openvswitch/veth_mod.ko
107 install -d -m 755 $RPM_BUILD_ROOT/var/lib/openvswitch
110 rm -rf $RPM_BUILD_ROOT
113 if [ ! -f /etc/xensource-inventory ]; then
114 printf "XenSource inventory not present in /etc/xensource-inventory"
118 if [ "$1" = "1" ]; then
119 if md5sum -c --status <<EOF
120 ca141d60061dcfdade73e75abc6529b5 /usr/sbin/brctl
121 b8e9835862ef1a9cec2a3f477d26c989 /etc/xensource/scripts/vif
122 51970ad613a3996d5997e18e44db47da /opt/xensource/libexec/interface-reconfigure
123 5654c8c36699fcc8744ca9cd5b855414 /usr/sbin/xen-bugtool
126 printf "\nVerified host scripts from XenServer 5.5.0.\n\n"
127 elif md5sum -c --status <<EOF
128 ca141d60061dcfdade73e75abc6529b5 /usr/sbin/brctl
129 b8e9835862ef1a9cec2a3f477d26c989 /etc/xensource/scripts/vif
130 51970ad613a3996d5997e18e44db47da /opt/xensource/libexec/interface-reconfigure
131 f6519085c2fc5f7bc4eccc294ed62000 /usr/sbin/xen-bugtool
134 printf "\nVerified host scripts from XenServer 5.5.0-24648p (Update 1)\n"
135 printf "or 5.5.0-25727p (Update 2).\n\n"
136 elif md5sum -c --status <<EOF
137 ca141d60061dcfdade73e75abc6529b5 /usr/sbin/brctl
138 02cf136237ed85fcbcc1efc15ce0591c /opt/xensource/libexec/interface-reconfigure
139 3a192ee70ebf2153c90051b3af95f331 /opt/xensource/libexec/InterfaceReconfigureBridge.py
140 f71cadf1464caefa7943de0ab47fdd8a /opt/xensource/libexec/InterfaceReconfigure.py
141 d70f08f235fb1bfd49a0580e440f15a0 /opt/xensource/libexec/InterfaceReconfigureVswitch.py
142 f5c85ca825b1e6f5a0845530981cd836 /etc/xensource/scripts/vif
143 facb851606f82ca2bcc760a4d91bbe33 /usr/sbin/xen-bugtool
146 printf "\nVerified host scripts from XenServer 5.5.900-29381p.\n\n"
150 The original XenServer scripts replaced by this package are not those
151 of any supported version of XenServer. This could lead to unexpected
152 behavior of your server. Unless you are sure you know what you are
153 doing, it is highly recommended that you remove this package
154 immediately after the install completes, which will restore the
155 XenServer scripts that you were previously using.
161 if test ! -e /var/xapi/network.dbcache; then
162 if test "$1" = 1; then
163 printf "Creating xapi database cache... "
165 printf "warning: Open vSwitch is being re-installed or upgraded,\n"
166 printf " but the xapi database cache is missing.\n"
167 printf "Re-creating xapi database cache... "
170 if /usr/share/openvswitch/scripts/interface-reconfigure rewrite; then
174 printf "Open vSwitch can only be installed on a XenServer that\n"
175 printf "has connectivity to xapi on the pool master. Please\n"
176 printf "fix connectivity to the pool master, then try again.\n"
181 # Ensure that modprobe will find our modules.
182 depmod %{xen_version}
184 if grep -F net.ipv4.conf.all.arp_filter /etc/sysctl.conf >/dev/null 2>&1; then :; else
185 cat >>/etc/sysctl.conf <<EOF
186 # This works around an issue in xhad, which binds to a particular
187 # Ethernet device, which in turn causes ICMP port unreachable messages
188 # if packets are received are on the wrong interface, which in turn
189 # can happen if we send out ARP replies on every interface (as Linux
190 # does by default) instead of just on the interface that has the IP
191 # address being ARPed for, which this sysctl setting in turn works
195 net.ipv4.conf.all.arp_filter = 1
199 if test ! -e /etc/openvswitch/conf.db; then
200 install -d -m 755 -o root -g root /etc/openvswitch
202 # Create ovs-vswitchd config database
203 ovsdb-tool -vANY:console:emer create /etc/openvswitch/conf.db \
204 /usr/share/openvswitch/vswitch.ovsschema \
206 # Create initial table in config database
207 ovsdb-tool -vANY:console:emer transact /etc/openvswitch/conf.db \
208 '[{"op": "insert", "table": "Open_vSwitch", "row": {}}]' \
212 # Create default or update existing /etc/sysconfig/openvswitch.
213 SYSCONFIG=/etc/sysconfig/openvswitch
214 TEMPLATE=/usr/share/openvswitch/scripts/sysconfig.template
215 if [ ! -e $SYSCONFIG ]; then
216 cp $TEMPLATE $SYSCONFIG
218 for var in $(awk -F'[ :]' '/^# [_A-Z0-9]+:/{print $2}' $TEMPLATE)
220 if ! grep $var $SYSCONFIG >/dev/null 2>&1; then
222 sed -n "/$var:/,/$var=/p" $TEMPLATE >> $SYSCONFIG
227 # Replace XenServer files by our versions.
228 mkdir -p /usr/lib/openvswitch/xs-original \
229 || printf "Could not create script backup directory.\n"
231 /opt/xensource/libexec/interface-reconfigure \
232 /opt/xensource/libexec/InterfaceReconfigure.py \
233 /opt/xensource/libexec/InterfaceReconfigureBridge.py \
234 /opt/xensource/libexec/InterfaceReconfigureVswitch.py \
235 /etc/xensource/scripts/vif \
236 /usr/sbin/xen-bugtool \
241 if [ -f "$f" ] && [ "$t" != "/usr/share/openvswitch/scripts/$s" ]; then
242 mv "$f" /usr/lib/openvswitch/xs-original/ \
243 || printf "Could not save original XenServer $s script\n"
244 ln -s "/usr/share/openvswitch/scripts/$s" "$f" \
245 || printf "Could not link to Open vSwitch $s script\n"
249 # Install xsconsole plugin
250 plugin=$(readlink /usr/lib/xsconsole/plugins-base/XSFeatureVSwitch.py)
251 if [ "$plugin" != "/usr/share/openvswitch/scripts/XSFeatureVSwitch.py" ]; then
252 rm -f /usr/lib/xsconsole/plugins-base/XSFeatureVSwitch.py
253 ln -s /usr/share/openvswitch/scripts/XSFeatureVSwitch.py /usr/lib/xsconsole/plugins-base/ || printf "Could not link to vSswitch xsconsole plugin.\n"
256 # Ensure all required services are set to run
257 for s in openvswitch openvswitch-xapi-update; do
258 if chkconfig --list $s >/dev/null 2>&1; then
259 chkconfig --del $s || printf "Could not remove $s init script."
261 chkconfig --add $s || printf "Could not add $s init script."
262 chkconfig $s on || printf "Could not enable $s init script."
265 # Configure system to use Open vSwitch
266 echo vswitch > /etc/xensource/network.conf
268 if [ "$1" = "1" ]; then # $1 = 2 for upgrade
269 printf "\nYou MUST reboot the server NOW to complete the change to\n"
270 printf "Open vSwitch. Attempts to modify networking on the server\n"
271 printf "or any hosted VM will fail until after the reboot and could\n"
272 printf "leave the server in an state requiring manual recovery.\n\n"
274 printf "\nTo use the new Open vSwitch install, you should reboot the\n"
275 printf "server now. Failure to do so may result in incorrect operation."
280 if [ "$1" = "0" ]; then # $1 = 1 for upgrade
281 for s in openvswitch openvswitch-xapi-update; do
282 chkconfig --del $s || printf "Could not remove $s init script."
288 if [ "$1" = "0" ]; then # $1 = 1 for upgrade
290 rm -f /usr/lib/xsconsole/plugins-base/XSFeatureVSwitch.py \
291 /usr/lib/xsconsole/plugins-base/XSFeatureVSwitch.pyc \
292 /usr/lib/xsconsole/plugins-base/XSFeatureVSwitch.pyo \
293 || printf "Could not remove Open vSwitch xsconsole plugin.\n"
295 # Restore original XenServer scripts
297 /opt/xensource/libexec/interface-reconfigure \
298 /etc/xensource/scripts/vif \
299 /usr/sbin/xen-bugtool \
303 if [ ! -f "/usr/lib/openvswitch/xs-original/$s" ]; then
304 printf "Original XenServer $s script not present in /usr/lib/openvswitch/xs-original\n"
305 printf "Could not restore original XenServer script.\n"
308 && mv "/usr/lib/openvswitch/xs-original/$s" "$f") \
309 || printf "Could not restore original XenServer $s script.\n"
313 # Remove all configuration files
314 rm -f /etc/openvswitch/conf.db
315 rm -f /etc/sysconfig/openvswitch
316 rm -f /etc/openvswitch/vswitchd.cacert
317 rm -f /var/xapi/network.dbcache
319 # Configure system to use bridge
320 echo bridge > /etc/xensource/network.conf
322 printf "\nYou MUST reboot the server now to complete the change to\n"
323 printf "standard Xen networking. Attempts to modify networking on the\n"
324 printf "server or any hosted VM will fail until after the reboot and\n"
325 printf "could leave the server in a state requiring manual recovery.\n\n"
330 %defattr(-,root,root)
331 /etc/init.d/openvswitch
332 /etc/init.d/openvswitch-xapi-update
333 /etc/xapi.d/plugins/openvswitch-cfg-update
334 /etc/logrotate.d/openvswitch
335 /etc/profile.d/openvswitch.sh
336 /lib/modules/%{xen_version}/kernel/net/openvswitch/openvswitch_mod.ko
337 /lib/modules/%{xen_version}/kernel/net/openvswitch/brcompat_mod.ko
338 %if %(echo '%{xen_version}'|awk -F"." '{if ($3>=18) print 1; else print 0;}')
339 /lib/modules/%{xen_version}/kernel/net/openvswitch/ip_gre_mod.ko
341 /usr/share/openvswitch/scripts/refresh-network-uuids
342 /usr/share/openvswitch/scripts/interface-reconfigure
343 /usr/share/openvswitch/scripts/InterfaceReconfigure.py
344 /usr/share/openvswitch/scripts/InterfaceReconfigureBridge.py
345 /usr/share/openvswitch/scripts/InterfaceReconfigureVswitch.py
346 /usr/share/openvswitch/scripts/vif
347 /usr/share/openvswitch/scripts/xen-bugtool
348 /usr/share/openvswitch/scripts/XSFeatureVSwitch.py
349 /usr/share/openvswitch/scripts/brctl
350 /usr/share/openvswitch/scripts/sysconfig.template
351 /usr/share/openvswitch/vswitch.ovsschema
352 /usr/sbin/ovs-brcompatd
353 /usr/sbin/ovs-vswitchd
354 /usr/sbin/ovsdb-server
359 /usr/bin/ovsdb-client
361 /usr/share/man/man1/ovsdb-client.1.gz
362 /usr/share/man/man1/ovsdb-server.1.gz
363 /usr/share/man/man1/ovsdb-tool.1.gz
364 /usr/share/man/man5/ovs-vswitchd.conf.db.5.gz
365 /usr/share/man/man8/ovs-appctl.8.gz
366 /usr/share/man/man8/ovs-brcompatd.8.gz
367 /usr/share/man/man8/ovs-dpctl.8.gz
368 /usr/share/man/man8/ovs-ofctl.8.gz
369 /usr/share/man/man8/ovs-vsctl.8.gz
370 /usr/share/man/man8/ovs-vswitchd.8.gz
372 %exclude /usr/share/openvswitch/scripts/*.pyc
373 %exclude /usr/share/openvswitch/scripts/*.pyo