pintos-os.org Git - openvswitch/blob - xenserver/openvswitch-xen.spec

   1 # Spec file for Open vSwitch.
   2
   3 # Copyright (C) 2009, 2010 Nicira Networks, Inc.
   4 #
   5 # Copying and distribution of this file, with or without modification,
   6 # are permitted in any medium without royalty provided the copyright
   7 # notice and this notice are preserved.  This file is offered as-is,
   8 # without warranty of any kind.
   9
  10 # When building, the rpmbuild command line should define
  11 # openvswitch_version, xen_version, and build_number using -D arguments.
  12 # for example:
  13 #
  14 #    rpmbuild -D "openvswitch_version 0.8.9~1+build123" -D "xen_version 2.6.18-128.1.1.el5.xs5.1.0.483.1000xen" -D "build_number --with-build-number=123" -bb /usr/src/redhat/SPECS/openvswitch-xen.spec
  15 #
  16 %define version %{openvswitch_version}-%{xen_version}
  17
  18 Name: openvswitch
  19 Summary: Virtual switch
  20 Group: System Environment/Daemons
  21 URL: http://www.openvswitch.org/
  22 Vendor: Nicira Networks, Inc.
  23 Version: %{openvswitch_version}
  24
  25 # The entire source code is ASL 2.0 except datapath/ which is GPLv2
  26 License: ASL 2.0 and GPLv2
  27 Release: 1
  28 Source: openvswitch-%{openvswitch_version}.tar.gz
  29 Buildroot: /tmp/openvswitch-xen-rpm
  30 Requires: kernel-xen = %(echo '%{xen_version}' | sed 's/xen$//')
  31
  32 %description
  33 Open vSwitch provides standard network bridging functions augmented with
  34 support for the OpenFlow protocol for remote per-flow control of
  35 traffic.
  36
  37 %prep
  38 %setup -q -n openvswitch-%{openvswitch_version}
  39
  40 %build
  41 ./configure --prefix=/usr --sysconfdir=/etc --localstatedir=%{_localstatedir} --with-l26=/lib/modules/%{xen_version}/build --enable-ssl %{build_number}
  42 make %{_smp_mflags}
  43
  44 %install
  45 rm -rf $RPM_BUILD_ROOT
  46 make install DESTDIR=$RPM_BUILD_ROOT
  47 install -d -m 755 $RPM_BUILD_ROOT/etc
  48 install -d -m 755 $RPM_BUILD_ROOT/etc/init.d
  49 install -m 755 xenserver/etc_init.d_openvswitch \
  50          $RPM_BUILD_ROOT/etc/init.d/openvswitch
  51 install -m 755 xenserver/etc_init.d_openvswitch-xapi-update \
  52          $RPM_BUILD_ROOT/etc/init.d/openvswitch-xapi-update
  53 install -d -m 755 $RPM_BUILD_ROOT/etc/sysconfig
  54 install -d -m 755 $RPM_BUILD_ROOT/etc/logrotate.d
  55 install -m 755 xenserver/etc_logrotate.d_openvswitch \
  56          $RPM_BUILD_ROOT/etc/logrotate.d/openvswitch
  57 install -d -m 755 $RPM_BUILD_ROOT/etc/profile.d
  58 install -m 755 xenserver/etc_profile.d_openvswitch.sh \
  59          $RPM_BUILD_ROOT/etc/profile.d/openvswitch.sh
  60 install -d -m 755 $RPM_BUILD_ROOT/etc/xapi.d/plugins
  61 install -m 755 xenserver/etc_xapi.d_plugins_openvswitch-cfg-update \
  62          $RPM_BUILD_ROOT/etc/xapi.d/plugins/openvswitch-cfg-update
  63 install -d -m 755 $RPM_BUILD_ROOT/usr/share/openvswitch/scripts
  64 install -m 644 vswitchd/vswitch.ovsschema \
  65          $RPM_BUILD_ROOT/usr/share/openvswitch/vswitch.ovsschema
  66 install -m 755 xenserver/opt_xensource_libexec_interface-reconfigure \
  67              $RPM_BUILD_ROOT/usr/share/openvswitch/scripts/interface-reconfigure
  68 install -m 644 xenserver/opt_xensource_libexec_InterfaceReconfigure.py \
  69              $RPM_BUILD_ROOT/usr/share/openvswitch/scripts/InterfaceReconfigure.py
  70 install -m 644 xenserver/opt_xensource_libexec_InterfaceReconfigureBridge.py \
  71              $RPM_BUILD_ROOT/usr/share/openvswitch/scripts/InterfaceReconfigureBridge.py
  72 install -m 644 xenserver/opt_xensource_libexec_InterfaceReconfigureVswitch.py \
  73              $RPM_BUILD_ROOT/usr/share/openvswitch/scripts/InterfaceReconfigureVswitch.py
  74 install -m 755 xenserver/etc_xensource_scripts_vif \
  75              $RPM_BUILD_ROOT/usr/share/openvswitch/scripts/vif
  76 install -m 755 xenserver/usr_share_openvswitch_scripts_refresh-network-uuids \
  77                $RPM_BUILD_ROOT/usr/share/openvswitch/scripts/refresh-network-uuids
  78 install -m 755 xenserver/usr_sbin_xen-bugtool \
  79              $RPM_BUILD_ROOT/usr/share/openvswitch/scripts/xen-bugtool
  80 install -m 755 xenserver/usr_sbin_brctl \
  81              $RPM_BUILD_ROOT/usr/share/openvswitch/scripts/brctl
  82 install -m 755 xenserver/usr_share_openvswitch_scripts_sysconfig.template \
  83          $RPM_BUILD_ROOT/usr/share/openvswitch/scripts/sysconfig.template
  84 install -d -m 755 $RPM_BUILD_ROOT/usr/lib/xsconsole/plugins-base
  85 install -m 644 \
  86         xenserver/usr_lib_xsconsole_plugins-base_XSFeatureVSwitch.py \
  87                $RPM_BUILD_ROOT/usr/lib/xsconsole/plugins-base/XSFeatureVSwitch.py
  88
  89 install -d -m 755 $RPM_BUILD_ROOT/lib/modules/%{xen_version}/kernel/extra/openvswitch
  90 find datapath/linux-2.6 -name *.ko -exec install -m 755  \{\} $RPM_BUILD_ROOT/lib/modules/%{xen_version}/kernel/extra/openvswitch \;
  91
  92 # Get rid of stuff we don't want to make RPM happy.
  93 rm \
  94     $RPM_BUILD_ROOT/usr/bin/ovs-controller \
  95     $RPM_BUILD_ROOT/usr/bin/ovs-discover \
  96     $RPM_BUILD_ROOT/usr/bin/ovs-kill \
  97     $RPM_BUILD_ROOT/usr/bin/ovs-openflowd \
  98     $RPM_BUILD_ROOT/usr/bin/ovs-pki \
  99     $RPM_BUILD_ROOT/usr/share/man/man8/ovs-controller.8 \
 100     $RPM_BUILD_ROOT/usr/share/man/man8/ovs-discover.8 \
 101     $RPM_BUILD_ROOT/usr/share/man/man8/ovs-kill.8 \
 102     $RPM_BUILD_ROOT/usr/share/man/man8/ovs-openflowd.8 \
 103     $RPM_BUILD_ROOT/usr/share/man/man8/ovs-pki.8
 104
 105 install -d -m 755 $RPM_BUILD_ROOT/var/lib/openvswitch
 106
 107 %clean
 108 rm -rf $RPM_BUILD_ROOT
 109
 110 %post
 111 if [ ! -f /etc/xensource-inventory ]; then
 112     printf "XenSource inventory not present in /etc/xensource-inventory"
 113     exit 1
 114 fi
 115 . /etc/xensource-inventory
 116
 117 if [ "$1" = "1" ]; then
 118     if md5sum -c --status <<EOF
 119 ca141d60061dcfdade73e75abc6529b5  /usr/sbin/brctl
 120 b8e9835862ef1a9cec2a3f477d26c989  /etc/xensource/scripts/vif
 121 51970ad613a3996d5997e18e44db47da  /opt/xensource/libexec/interface-reconfigure
 122 5654c8c36699fcc8744ca9cd5b855414  /usr/sbin/xen-bugtool
 123 EOF
 124     then
 125         printf "\nVerified host scripts from XenServer 5.5.0.\n\n"
 126     elif md5sum -c --status <<EOF
 127 ca141d60061dcfdade73e75abc6529b5  /usr/sbin/brctl
 128 b8e9835862ef1a9cec2a3f477d26c989  /etc/xensource/scripts/vif
 129 51970ad613a3996d5997e18e44db47da  /opt/xensource/libexec/interface-reconfigure
 130 f6519085c2fc5f7bc4eccc294ed62000  /usr/sbin/xen-bugtool
 131 EOF
 132     then
 133         printf "\nVerified host scripts from XenServer 5.5.0-24648p (Update 1)\n"
 134         printf "or 5.5.0-25727p (Update 2).\n\n"
 135     elif md5sum -c --status <<EOF
 136 ca141d60061dcfdade73e75abc6529b5  /usr/sbin/brctl
 137 02cf136237ed85fcbcc1efc15ce0591c  /opt/xensource/libexec/interface-reconfigure
 138 3a192ee70ebf2153c90051b3af95f331  /opt/xensource/libexec/InterfaceReconfigureBridge.py
 139 f71cadf1464caefa7943de0ab47fdd8a  /opt/xensource/libexec/InterfaceReconfigure.py
 140 d70f08f235fb1bfd49a0580e440f15a0  /opt/xensource/libexec/InterfaceReconfigureVswitch.py
 141 f5c85ca825b1e6f5a0845530981cd836  /etc/xensource/scripts/vif
 142 facb851606f82ca2bcc760a4d91bbe33  /usr/sbin/xen-bugtool
 143 EOF
 144     then
 145         printf "\nVerified host scripts from XenServer 5.5.900-29381p.\n\n"
 146     else
 147 cat <<EOF
 148
 149 The original XenServer scripts replaced by this package are not those
 150 of any supported version of XenServer.  This could lead to unexpected
 151 behavior of your server.  Unless you are sure you know what you are
 152 doing, it is highly recommended that you remove this package
 153 immediately after the install completes, which will restore the
 154 XenServer scripts that you were previously using.
 155
 156 EOF
 157     fi
 158 fi
 159
 160 # On XenServer 5.5.0, we need refresh-network-uuids to run whenever
 161 # XAPI starts or restarts.  (On XenServer 5.6.0, XAPI calls the
 162 # "update" method of the vswitch-cfg-update plugin whenever it starts
 163 # or restarts, so this is no longer necessary.)
 164 if test "$PRODUCT_VERSION" = "5.5.0"; then
 165     RNU=/usr/share/openvswitch/scripts/refresh-network-uuids
 166     XSS=/opt/xensource/libexec/xapi-startup-script
 167     if test -e $XSS && (test ! -L $XSS || test "`readlink $XSS`" != $RNU); then
 168         echo "$XSS is already in use, refusing to overwrite"
 169         exit 1
 170     fi
 171     rm -f $XSS
 172     ln -s $RNU $XSS
 173
 174     # If /etc/xensource/network.conf doesn't exist (it was added in 5.6.0),
 175     # then interface-reconfigure will be unhappy when we run it below.
 176     if test ! -e /etc/xensource/network.conf; then
 177         echo bridge > /etc/xensource/network.conf
 178     fi
 179 fi
 180
 181
 182 if test ! -e /var/xapi/network.dbcache; then
 183     if test "$1" = 1; then
 184         printf "Creating xapi database cache...  "
 185     else
 186         printf "warning: Open vSwitch is being re-installed or upgraded,\n"
 187         printf "         but the xapi database cache is missing.\n"
 188         printf "Re-creating xapi database cache...  "
 189     fi
 190
 191     if /usr/share/openvswitch/scripts/interface-reconfigure rewrite; then
 192         printf "done.\n"
 193     else
 194         printf "FAILED\n"
 195         printf "Open vSwitch can only be installed on a XenServer that\n"
 196         printf "has connectivity to xapi on the pool master.  Please\n"
 197         printf "fix connectivity to the pool master, then try again.\n"
 198         exit 1
 199     fi
 200 fi
 201
 202 # Ensure that modprobe will find our modules.
 203 depmod %{xen_version}
 204
 205 if grep -F net.ipv4.conf.all.arp_filter /etc/sysctl.conf >/dev/null 2>&1; then :; else
 206     cat >>/etc/sysctl.conf <<EOF
 207 # This works around an issue in xhad, which binds to a particular
 208 # Ethernet device, which in turn causes ICMP port unreachable messages
 209 # if packets are received are on the wrong interface, which in turn
 210 # can happen if we send out ARP replies on every interface (as Linux
 211 # does by default) instead of just on the interface that has the IP
 212 # address being ARPed for, which this sysctl setting in turn works
 213 # around.
 214 #
 215 # Bug #1378.
 216 net.ipv4.conf.all.arp_filter = 1
 217 EOF
 218 fi
 219
 220 if test ! -e /etc/openvswitch/conf.db; then
 221     install -d -m 755 -o root -g root /etc/openvswitch
 222
 223     # Create ovs-vswitchd config database
 224     ovsdb-tool -vANY:console:emer create /etc/openvswitch/conf.db \
 225             /usr/share/openvswitch/vswitch.ovsschema
 226
 227     # Create initial table in config database
 228     ovsdb-tool -vANY:console:emer transact /etc/openvswitch/conf.db \
 229             '[{"op": "insert", "table": "Open_vSwitch", "row": {}}]' \
 230             > /dev/null
 231 fi
 232
 233 # Create default or update existing /etc/sysconfig/openvswitch.
 234 SYSCONFIG=/etc/sysconfig/openvswitch
 235 TEMPLATE=/usr/share/openvswitch/scripts/sysconfig.template
 236 if [ ! -e $SYSCONFIG ]; then
 237     cp $TEMPLATE $SYSCONFIG
 238 else
 239     for var in $(awk -F'[ :]' '/^# [_A-Z0-9]+:/{print $2}' $TEMPLATE)
 240     do
 241         if ! grep $var $SYSCONFIG >/dev/null 2>&1; then
 242             echo >> $SYSCONFIG
 243             sed -n "/$var:/,/$var=/p" $TEMPLATE >> $SYSCONFIG
 244         fi
 245     done
 246 fi
 247
 248 # Replace XenServer files by our versions.
 249 mkdir -p /usr/lib/openvswitch/xs-original \
 250     || printf "Could not create script backup directory.\n"
 251 for f in \
 252     /opt/xensource/libexec/interface-reconfigure \
 253     /opt/xensource/libexec/InterfaceReconfigure.py \
 254     /opt/xensource/libexec/InterfaceReconfigureBridge.py \
 255     /opt/xensource/libexec/InterfaceReconfigureVswitch.py \
 256     /etc/xensource/scripts/vif \
 257     /usr/sbin/xen-bugtool \
 258     /usr/sbin/brctl
 259 do
 260     s=$(basename "$f")
 261     t=$(readlink "$f")
 262     if [ -f "$f" ] && [ "$t" != "/usr/share/openvswitch/scripts/$s" ]; then
 263         mv "$f" /usr/lib/openvswitch/xs-original/ \
 264             || printf "Could not save original XenServer $s script\n"
 265         ln -s "/usr/share/openvswitch/scripts/$s" "$f" \
 266             || printf "Could not link to Open vSwitch $s script\n"
 267     fi
 268 done
 269
 270 # Ensure all required services are set to run
 271 for s in openvswitch openvswitch-xapi-update; do
 272     if chkconfig --list $s >/dev/null 2>&1; then
 273         chkconfig --del $s || printf "Could not remove $s init script."
 274     fi
 275     chkconfig --add $s || printf "Could not add $s init script."
 276     chkconfig $s on || printf "Could not enable $s init script."
 277 done
 278
 279 # Configure system to use Open vSwitch
 280 echo vswitch > /etc/xensource/network.conf
 281
 282 if [ "$1" = "1" ]; then    # $1 = 2 for upgrade
 283     printf "\nYou MUST reboot the server NOW to complete the change to\n"
 284     printf "Open vSwitch.  Attempts to modify networking on the server\n"
 285     printf "or any hosted VM will fail until after the reboot and could\n"
 286     printf "leave the server in an state requiring manual recovery.\n\n"
 287 else
 288     printf "\nTo use the new Open vSwitch install, you should reboot the\n"
 289     printf "server now.  Failure to do so may result in incorrect operation."
 290     printf "\n\n"
 291 fi
 292
 293 %preun
 294 if [ "$1" = "0" ]; then     # $1 = 1 for upgrade
 295     for s in openvswitch openvswitch-xapi-update; do
 296         chkconfig --del $s || printf "Could not remove $s init script."
 297     done
 298 fi
 299
 300
 301 %postun
 302 if [ "$1" = "0" ]; then     # $1 = 1 for upgrade
 303     . /etc/xensource-inventory
 304     if test "$PRODUCT_VERSION" = "5.5.0"; then
 305         XSS=/opt/xensource/libexec/xapi-startup-script
 306         rm -f $XSS
 307     fi
 308
 309     rm -f /usr/lib/xsconsole/plugins-base/XSFeatureVSwitch.pyc \
 310         /usr/lib/xsconsole/plugins-base/XSFeatureVSwitch.pyo
 311
 312     rm -f /usr/share/openvswitch/scripts/InterfaceReconfigure.pyc \
 313         /usr/share/openvswitch/scripts/InterfaceReconfigure.pyo \
 314         /usr/share/openvswitch/scripts/InterfaceReconfigureBridge.pyc \
 315         /usr/share/openvswitch/scripts/InterfaceReconfigureBridge.pyo \
 316         /usr/share/openvswitch/scripts/InterfaceReconfigureVSwitch.pyc \
 317         /usr/share/openvswitch/scripts/InterfaceReconfigureVSwitch.pyo
 318
 319     # Restore original XenServer scripts
 320     for f in \
 321         /opt/xensource/libexec/interface-reconfigure \
 322         /opt/xensource/libexec/InterfaceReconfigure.py \
 323         /opt/xensource/libexec/InterfaceReconfigureBridge.py \
 324         /opt/xensource/libexec/InterfaceReconfigureVswitch.py \
 325         /etc/xensource/scripts/vif \
 326         /usr/sbin/xen-bugtool \
 327         /usr/sbin/brctl
 328     do
 329         s=$(basename "$f")
 330         if [ ! -f "/usr/lib/openvswitch/xs-original/$s" ]; then
 331             printf "Original XenServer $s script not present in /usr/lib/openvswitch/xs-original\n"
 332             printf "Could not restore original XenServer script.\n"
 333         else
 334             (rm -f "$f" \
 335                 && mv "/usr/lib/openvswitch/xs-original/$s" "$f") \
 336                 || printf "Could not restore original XenServer $s script.\n"
 337         fi
 338     done
 339
 340     # Remove all configuration files
 341     rm -f /etc/openvswitch/conf.db
 342     rm -f /etc/sysconfig/openvswitch
 343     rm -f /etc/openvswitch/vswitchd.cacert
 344     rm -f /var/xapi/network.dbcache
 345
 346     if test "$PRODUCT_VERSION" != "5.5.0"; then
 347         # Configure system to use bridge
 348         echo bridge > /etc/xensource/network.conf
 349     else
 350         # Get rid of network.conf entirely, to make the system pristine.
 351         rm -f /etc/xensource/network.conf
 352     fi
 353
 354     printf "\nYou MUST reboot the server now to complete the change to\n"
 355     printf "standard Xen networking.  Attempts to modify networking on the\n"
 356     printf "server or any hosted VM will fail until after the reboot and\n"
 357     printf "could leave the server in a state requiring manual recovery.\n\n"
 358 fi
 359
 360
 361 %files
 362 %defattr(-,root,root)
 363 /etc/init.d/openvswitch
 364 /etc/init.d/openvswitch-xapi-update
 365 /etc/xapi.d/plugins/openvswitch-cfg-update
 366 /etc/logrotate.d/openvswitch
 367 /etc/profile.d/openvswitch.sh
 368 /lib/modules/%{xen_version}/kernel/extra/openvswitch/openvswitch_mod.ko
 369 /lib/modules/%{xen_version}/kernel/extra/openvswitch/brcompat_mod.ko
 370 /usr/share/openvswitch/scripts/refresh-network-uuids
 371 /usr/share/openvswitch/scripts/interface-reconfigure
 372 /usr/share/openvswitch/scripts/InterfaceReconfigure.py
 373 /usr/share/openvswitch/scripts/InterfaceReconfigureBridge.py
 374 /usr/share/openvswitch/scripts/InterfaceReconfigureVswitch.py
 375 /usr/share/openvswitch/scripts/vif
 376 /usr/share/openvswitch/scripts/xen-bugtool
 377 /usr/share/openvswitch/scripts/brctl
 378 /usr/share/openvswitch/scripts/sysconfig.template
 379 /usr/share/openvswitch/vswitch.ovsschema
 380 /usr/sbin/ovs-brcompatd
 381 /usr/sbin/ovs-vswitchd
 382 /usr/sbin/ovsdb-server
 383 /usr/bin/ovs-appctl
 384 /usr/bin/ovs-dpctl
 385 /usr/bin/ovs-ofctl
 386 /usr/bin/ovs-vsctl
 387 /usr/bin/ovsdb-client
 388 /usr/bin/ovsdb-tool
 389 /usr/lib/xsconsole/plugins-base/XSFeatureVSwitch.py
 390 /usr/share/man/man1/ovsdb-client.1.gz
 391 /usr/share/man/man1/ovsdb-server.1.gz
 392 /usr/share/man/man1/ovsdb-tool.1.gz
 393 /usr/share/man/man5/ovs-vswitchd.conf.db.5.gz
 394 /usr/share/man/man8/ovs-appctl.8.gz
 395 /usr/share/man/man8/ovs-brcompatd.8.gz
 396 /usr/share/man/man8/ovs-dpctl.8.gz
 397 /usr/share/man/man8/ovs-ofctl.8.gz
 398 /usr/share/man/man8/ovs-parse-leaks.8.gz
 399 /usr/share/man/man8/ovs-vsctl.8.gz
 400 /usr/share/man/man8/ovs-vswitchd.8.gz
 401 /var/lib/openvswitch
 402 %exclude /usr/lib/xsconsole/plugins-base/*.pyc
 403 %exclude /usr/lib/xsconsole/plugins-base/*.pyo
 404 %exclude /usr/share/openvswitch/scripts/*.pyc
 405 %exclude /usr/share/openvswitch/scripts/*.pyo