1 <?xml version="1.0" encoding="utf-8"?>
2 <database title="Open vSwitch Configuration Database">
4 A database with this schema holds the configuration for one Open
5 vSwitch daemon. The top-level configuration for the daemon is the
6 <ref table="Open_vSwitch"/> table, which must have exactly one
7 record. Records in other tables are significant only when they
8 can be reached directly or indirectly from the <ref
9 table="Open_vSwitch"/> table. Records that are not reachable from
10 the <ref table="Open_vSwitch"/> table are automatically deleted
11 from the database, except for records in a few distinguished
12 ``root set'' tables noted below.
15 <table name="Open_vSwitch" title="Open vSwitch configuration.">
16 Configuration for an Open vSwitch daemon. There must be exactly
17 one record in the <ref table="Open_vSwitch"/> table.
19 <group title="Configuration">
20 <column name="bridges">
21 Set of bridges managed by the daemon.
25 SSL used globally by the daemon.
28 <column name="external_ids">
29 Key-value pairs for use by external frameworks that integrate
30 with Open vSwitch, rather than by Open vSwitch itself. System
31 integrators should either use the Open vSwitch development
32 mailing list to coordinate on common key-value definitions, or
33 choose key names that are likely to be unique. The currently
34 defined common key-value pairs are:
36 <dt><code>system-id</code></dt>
37 <dd>A unique identifier for the Open vSwitch's physical host.
38 The form of the identifier depends on the type of the host.
39 On a Citrix XenServer, this will likely be the same as
40 <code>xs-system-uuid</code>.</dd>
41 <dt><code>xs-system-uuid</code></dt>
42 <dd>The Citrix XenServer universally unique identifier for the
43 physical host as displayed by <code>xe host-list</code>.</dd>
48 <group title="Status">
49 <column name="next_cfg">
50 Sequence number for client to increment. When a client modifies
51 any part of the database configuration and wishes to wait for
52 Open vSwitch to finish applying the changes, it may increment
56 <column name="cur_cfg">
57 Sequence number that Open vSwitch sets to the current value of
58 <ref column="next_cfg"/> after it finishes applying a set of
59 configuration changes.
62 <column name="capabilities">
63 Describes functionality supported by the hardware and software platform
64 on which this Open vSwitch is based. Clients should not modify this
65 column. See the <ref table="Capability"/> description for defined
66 capability categories and the meaning of associated
67 <ref table="Capability"/> records.
70 <column name="statistics">
72 Key-value pairs that report statistics about a system running an Open
73 vSwitch. These are updated periodically (currently, every 5
74 seconds). Key-value pairs that cannot be determined or that do not
75 apply to a platform are omitted.
79 <dt><code>cpu</code></dt>
82 Number of CPU processors, threads, or cores currently online and
83 available to the operating system on which Open vSwitch is
84 running, as an integer. This may be less than the number
85 installed, if some are not online or if they are not available to
89 Open vSwitch userspace processes are not multithreaded, but the
90 Linux kernel-based datapath is.
94 <dt><code>load_average</code></dt>
97 A comma-separated list of three floating-point numbers,
98 representing the system load average over the last 1, 5, and 15
99 minutes, respectively.
103 <dt><code>memory</code></dt>
106 A comma-separated list of integers, each of which represents a
107 quantity of memory in kilobytes that describes the operating
108 system on which Open vSwitch is running. In respective order,
113 <li>Total amount of RAM allocated to the OS.</li>
114 <li>RAM allocated to the OS that is in use.</li>
115 <li>RAM that can be flushed out to disk or otherwise discarded
116 if that space is needed for another purpose. This number is
117 necessarily less than or equal to the previous value.</li>
118 <li>Total disk space allocated for swap.</li>
119 <li>Swap space currently in use.</li>
123 On Linux, all five values can be determined and are included. On
124 other operating systems, only the first two values can be
125 determined, so the list will only have two values.
129 <dt><code>process_</code><var>name</var></dt>
132 One such key-value pair will exist for each running Open vSwitch
133 daemon process, with <var>name</var> replaced by the daemon's
134 name (e.g. <code>process_ovs-vswitchd</code>). The value is a
135 comma-separated list of integers. The integers represent the
136 following, with memory measured in kilobytes and durations in
141 <li>The process's virtual memory size.</li>
142 <li>The process's resident set size.</li>
143 <li>The amount of user and system CPU time consumed by the
145 <li>The number of times that the process has crashed and been
146 automatically restarted by the monitor.</li>
147 <li>The duration since the process was started.</li>
148 <li>The duration for which the process has been running.</li>
152 The interpretation of some of these values depends on whether the
153 process was started with the <option>--monitor</option>. If it
154 was not, then the crash count will always be 0 and the two
155 durations will always be the same. If <option>--monitor</option>
156 was given, then the crash count may be positive; if it is, the
157 latter duration is the amount of time since the most recent crash
162 There will be one key-value pair for each file in Open vSwitch's
163 ``run directory'' (usually <code>/var/run/openvswitch</code>)
164 whose name ends in <code>.pid</code>, whose contents are a
165 process ID, and which is locked by a running process. The
166 <var>name</var> is taken from the pidfile's name.
170 Currently Open vSwitch is only able to obtain all of the above
171 detail on Linux systems. On other systems, the same key-value
172 pairs will be present but the values will always be the empty
177 <dt><code>file_systems</code></dt>
180 A space-separated list of information on local, writable file
181 systems. Each item in the list describes one file system and
182 consists in turn of a comma-separated list of the following:
186 <li>Mount point, e.g. <code>/</code> or <code>/var/log</code>.
187 Any spaces or commas in the mount point are replaced by
189 <li>Total size, in kilobytes, as an integer.</li>
190 <li>Amount of storage in use, in kilobytes, as an integer.</li>
194 This key-value pair is omitted if there are no local, writable
195 file systems or if Open vSwitch cannot obtain the needed
203 <group title="Version Reporting">
205 These columns report the types and versions of the hardware and
206 software running Open vSwitch. We recommend in general that software
207 should test whether specific features are supported instead of relying
208 on version number checks. These values are primarily intended for
209 reporting to human administrators.
212 <column name="ovs_version">
213 The Open vSwitch version number, e.g. <code>1.1.0</code>.
214 If Open vSwitch was configured with a build number, then it is
215 also included, e.g. <code>1.1.0+build6579</code>.
218 <column name="db_version">
220 The database schema version number in the form
221 <code><var>major</var>.<var>minor</var>.<var>tweak</var></code>,
222 e.g. <code>1.2.3</code>. Whenever the database schema is changed in
223 a non-backward compatible way (e.g. deleting a column or a table),
224 <var>major</var> is incremented. When the database schema is changed
225 in a backward compatible way (e.g. adding a new column),
226 <var>minor</var> is incremented. When the database schema is changed
227 cosmetically (e.g. reindenting its syntax), <var>tweak</var> is
232 The schema version is part of the database schema, so it can also be
233 retrieved by fetching the schema using the Open vSwitch database
238 <column name="system_type">
240 An identifier for the type of system on top of which Open vSwitch
241 runs, e.g. <code>XenServer</code> or <code>KVM</code>.
244 System integrators are responsible for choosing and setting an
245 appropriate value for this column.
249 <column name="system_version">
251 The version of the system identified by <ref column="system_type"/>,
252 e.g. <code>5.6.100-39265p</code> on XenServer 5.6.100 build 39265.
255 System integrators are responsible for choosing and setting an
256 appropriate value for this column.
262 <group title="Database Configuration">
264 These columns primarily configure the Open vSwitch database
265 (<code>ovsdb-server</code>), not the Open vSwitch switch
266 (<code>ovs-vswitchd</code>). The OVSDB database also uses the <ref
267 column="ssl"/> settings.
271 The Open vSwitch switch does read the database configuration to
272 determine remote IP addresses to which in-band control should apply.
275 <column name="manager_options">
276 Database clients to which the Open vSwitch database server should
277 connect or to which it should listen, along with options for how these
278 connection should be configured. See the <ref table="Manager"/> table
279 for more information.
284 <table name="Bridge">
286 Configuration for a bridge within an
287 <ref table="Open_vSwitch"/>.
290 A <ref table="Bridge"/> record represents an Ethernet switch with one or
291 more ``ports,'' which are the <ref table="Port"/> records pointed to by
292 the <ref table="Bridge"/>'s <ref column="ports"/> column.
295 <group title="Core Features">
297 Bridge identifier. Should be alphanumeric and no more than about 8
298 bytes long. Must be unique among the names of ports, interfaces, and
302 <column name="ports">
303 Ports included in the bridge.
306 <column name="mirrors">
307 Port mirroring configuration.
310 <column name="netflow">
311 NetFlow configuration.
314 <column name="sflow">
318 <column name="flood_vlans">
319 VLAN IDs of VLANs on which MAC address learning should be disabled, so
320 that packets are flooded instead of being sent to specific ports that
321 are believed to contain packets' destination MACs. This should
322 ordinarily be used to disable MAC learning on VLANs used for mirroring
323 (RSPAN VLANs). It may also be useful for debugging.
327 <group title="OpenFlow Configuration">
328 <column name="controller">
329 OpenFlow controller set. If unset, then no OpenFlow controllers
333 <column name="fail_mode">
334 <p>When a controller is configured, it is, ordinarily, responsible
335 for setting up all flows on the switch. Thus, if the connection to
336 the controller fails, no new network connections can be set up.
337 If the connection to the controller stays down long enough,
338 no packets can pass through the switch at all. This setting
339 determines the switch's response to such a situation. It may be set
340 to one of the following:
342 <dt><code>standalone</code></dt>
343 <dd>If no message is received from the controller for three
344 times the inactivity probe interval
345 (see <ref column="inactivity_probe"/>), then Open vSwitch
346 will take over responsibility for setting up flows. In
347 this mode, Open vSwitch causes the bridge to act like an
348 ordinary MAC-learning switch. Open vSwitch will continue
349 to retry connecting to the controller in the background
350 and, when the connection succeeds, it will discontinue its
351 standalone behavior.</dd>
352 <dt><code>secure</code></dt>
353 <dd>Open vSwitch will not set up flows on its own when the
354 controller connection fails or when no controllers are
355 defined. The bridge will continue to retry connecting to
356 any defined controllers forever.</dd>
359 <p>If this value is unset, the default is implementation-specific.</p>
360 <p>When more than one controller is configured,
361 <ref column="fail_mode"/> is considered only when none of the
362 configured controllers can be contacted.</p>
365 <column name="datapath_id">
366 Reports the OpenFlow datapath ID in use. Exactly 16 hex
367 digits. (Setting this column will have no useful effect. Set
368 <ref column="other_config"/>:<code>other-config</code>
373 <group title="Other Features">
374 <column name="datapath_type">
375 Name of datapath provider. The kernel datapath has
376 type <code>system</code>. The userspace datapath has
377 type <code>netdev</code>.
380 <column name="external_ids">
381 Key-value pairs for use by external frameworks that integrate
382 with Open vSwitch, rather than by Open vSwitch itself. System
383 integrators should either use the Open vSwitch development
384 mailing list to coordinate on common key-value definitions, or
385 choose key names that are likely to be unique. The currently
386 defined key-value pairs are:
388 <dt><code>bridge-id</code></dt>
389 <dd>A unique identifier of the bridge. On Citrix XenServer this
390 will commonly be the same as <code>xs-network-uuids</code>.</dd>
391 <dt><code>xs-network-uuids</code></dt>
392 <dd>Semicolon-delimited set of universally unique identifier(s) for
393 the network with which this bridge is associated on a Citrix
394 XenServer host. The network identifiers are RFC 4122 UUIDs as
395 displayed by, e.g., <code>xe network-list</code>.</dd>
399 <column name="other_config">
400 Key-value pairs for configuring rarely used bridge
401 features. The currently defined key-value pairs are:
403 <dt><code>datapath-id</code></dt>
405 digits to set the OpenFlow datapath ID to a specific
406 value. May not be all-zero.</dd>
407 <dt><code>disable-in-band</code></dt>
408 <dd>If set to <code>true</code>, disable in-band control on
409 the bridge regardless of controller and manager settings.</dd>
410 <dt><code>hwaddr</code></dt>
411 <dd>An Ethernet address in the form
412 <var>xx</var>:<var>xx</var>:<var>xx</var>:<var>xx</var>:<var>xx</var>:<var>xx</var>
413 to set the hardware address of the local port and influence the
415 <dt><code>in-band-queue</code></dt>
417 A queue ID as a nonnegative integer. This sets the OpenFlow queue
418 ID that will be used by flows set up by in-band control on this
419 bridge. If unset, or if the port used by an in-band control flow
420 does not have QoS configured, or if the port does not have a queue
421 with the specified ID, the default queue is used instead.
428 <table name="Port" table="Port or bond configuration.">
429 <p>A port within a <ref table="Bridge"/>.</p>
430 <p>Most commonly, a port has exactly one ``interface,'' pointed to by its
431 <ref column="interfaces"/> column. Such a port logically
432 corresponds to a port on a physical Ethernet switch. A port
433 with more than one interface is a ``bonded port'' (see
434 <ref group="Bonding Configuration"/>).</p>
435 <p>Some properties that one might think as belonging to a port are actually
436 part of the port's <ref table="Interface"/> members.</p>
439 Port name. Should be alphanumeric and no more than about 8
440 bytes long. May be the same as the interface name, for
441 non-bonded ports. Must otherwise be unique among the names of
442 ports, interfaces, and bridges on a host.
445 <column name="interfaces">
446 The port's interfaces. If there is more than one, this is a
450 <group title="VLAN Configuration">
451 <p>A bridge port must be configured for VLANs in one of two
452 mutually exclusive ways:
454 <li>A ``trunk port'' has an empty value for <ref
455 column="tag"/>. Its <ref column="trunks"/> value may be
456 empty or non-empty.</li>
457 <li>An ``implicitly tagged VLAN port'' or ``access port''
458 has an nonempty value for <ref column="tag"/>. Its
459 <ref column="trunks"/> value must be empty.</li>
461 If <ref column="trunks"/> and <ref column="tag"/> are both
462 nonempty, the configuration is ill-formed.
467 If this is an access port (see above), the port's implicitly
468 tagged VLAN. Must be empty if this is a trunk port.
471 Frames arriving on trunk ports will be forwarded to this
472 port only if they are tagged with the given VLAN (or, if
473 <ref column="tag"/> is 0, then if they lack a VLAN header).
474 Frames arriving on other access ports will be forwarded to
475 this port only if they have the same <ref column="tag"/>
476 value. Frames forwarded to this port will not have an
480 When a frame with a 802.1Q header that indicates a nonzero
481 VLAN is received on an access port, it is discarded.
485 <column name="trunks">
487 If this is a trunk port (see above), the 802.1Q VLAN(s) that
488 this port trunks; if it is empty, then the port trunks all
489 VLANs. Must be empty if this is an access port.
492 Frames arriving on trunk ports are dropped if they are not
493 in one of the specified VLANs. For this purpose, packets
494 that have no VLAN header are treated as part of VLAN 0.
499 <group title="Bonding Configuration">
500 <p>A port that has more than one interface is a ``bonded port.'' Bonding
501 allows for load balancing and fail-over. Some kinds of bonding will
502 work with any kind of upstream switch:</p>
505 <dt><code>balance-slb</code></dt>
507 Balances flows among slaves based on source MAC address and output
508 VLAN, with periodic rebalancing as traffic patterns change.
511 <dt><code>active-backup</code></dt>
513 Assigns all flows to one slave, failing over to a backup slave when
514 the active slave is disabled.
519 The following modes require the upstream switch to support 802.3ad with
520 successful LACP negotiation. If LACP negotiation fails then
521 <code>balance-slb</code> style flow hashing is used as a fallback:
525 <dt><code>balance-tcp</code></dt>
527 Balances flows among slaves based on L2, L3, and L4 protocol
528 information such as destination MAC address, IP address, and TCP
534 <dt><code>stable</code></dt>
536 <p>Attempts to always assign a given flow to the same slave
537 consistently. In an effort to maintain stability, no load
538 balancing is done. Uses a similar hashing strategy to
539 <code>balance-tcp</code>, falling back to <code>balance-slb</code>
540 style hashing when LACP negotiations are unsuccessful.</p>
541 <p>Slave selection decisions are made based on LACP port ID when LACP
542 negotiations are successful, falling back to openflow port number
543 when unsuccessful. Thus, decisions are consistent across all
544 ovs-vswitchd instances with equivalent port IDs.</p>
548 <p>These columns apply only to bonded ports. Their values are
549 otherwise ignored.</p>
551 <column name="bond_mode">
552 <p>The type of bonding used for a bonded port. Defaults to
553 <code>balance-slb</code> if unset.
557 <column name="bond_updelay">
558 <p>For a bonded port, the number of milliseconds for which carrier must
559 stay up on an interface before the interface is considered to be up.
560 Specify <code>0</code> to enable the interface immediately.</p>
561 <p>This setting is honored only when at least one bonded interface is
562 already enabled. When no interfaces are enabled, then the first bond
563 interface to come up is enabled immediately.</p>
566 <column name="bond_downdelay">
567 For a bonded port, the number of milliseconds for which carrier must
568 stay down on an interface before the interface is considered to be
569 down. Specify <code>0</code> to disable the interface immediately.
572 <column name="bond_fake_iface">
573 For a bonded port, whether to create a fake internal interface with the
574 name of the port. Use only for compatibility with legacy software that
579 <p>Configures LACP on this port. LACP allows directly connected
580 switchs to negotiate which links may be bonded. LACP may be enabled
581 on non-bonded ports for the benefit of any switchs they may be
582 connected to. <code>active</code> ports are allowed to initiate LACP
583 negotiations. <code>passive</code> ports are allowed to participate
584 in LACP negotiations initiated by a remote switch, but not allowed to
585 initiate such negotiations themselves. If unset Open vSwitch will
586 choose a reasonable default. </p>
591 <group title="Other Features">
593 Quality of Service configuration for this port.
597 The MAC address to use for this port for the purpose of choosing the
598 bridge's MAC address. This column does not necessarily reflect the
599 port's actual MAC address, nor will setting it change the port's actual
603 <column name="fake_bridge">
604 Does this port represent a sub-bridge for its tagged VLAN within the
605 Bridge? See ovs-vsctl(8) for more information.
608 <column name="external_ids">
610 Key-value pairs for use by external frameworks that integrate with
611 Open vSwitch, rather than by Open vSwitch itself. System integrators
612 should either use the Open vSwitch development mailing list to
613 coordinate on common key-value definitions, or choose key names that
614 are likely to be unique.
617 No key-value pairs native to <ref table="Port"/> are currently
618 defined. For fake bridges (see the <ref column="fake_bridge"/>
619 column), external IDs for the fake bridge are defined here by
620 prefixing a <ref table="Bridge"/> <ref table="Bridge"
621 column="external_ids"/> key with <code>fake-bridge-</code>,
622 e.g. <code>fake-bridge-xs-network-uuids</code>.
626 <column name="other_config">
627 Key-value pairs for configuring rarely used port features. The
628 currently defined key-value pairs are:
630 <dt><code>hwaddr</code></dt>
631 <dd>An Ethernet address in the form
632 <code><var>xx</var>:<var>xx</var>:<var>xx</var>:<var>xx</var>:<var>xx</var>:<var>xx</var></code>.</dd>
633 <dt><code>bond-rebalance-interval</code></dt>
634 <dd>For an SLB bonded port, the number of milliseconds between
635 successive attempts to rebalance the bond, that is, to
636 move source MACs and their flows from one interface on
637 the bond to another in an attempt to keep usage of each
638 interface roughly equal. The default is 10000 (10
639 seconds), and the minimum is 1000 (1 second).</dd>
640 <dt><code>bond-detect-mode</code></dt>
641 <dd> Sets the method used to detect link failures in a bonded port.
642 Options are <code>carrier</code> and <code>miimon</code>. Defaults
643 to <code>carrier</code> which uses each interface's carrier to detect
644 failures. When set to <code>miimon</code>, will check for failures
645 by polling each interface's MII. </dd>
646 <dt><code>bond-miimon-interval</code></dt>
647 <dd> The number of milliseconds between successive attempts to
648 poll each interface's MII. Only relevant on ports which use
649 <code>miimon</code> to detect failures. </dd>
650 <dt><code>lacp-system-id</code></dt>
651 <dd> The LACP system ID of this <ref table="Port"/>. The system ID
652 of a LACP bond is used to identify itself to its partners. Must
653 be a nonzero MAC address.</dd>
654 <dt><code>lacp-system-priority</code></dt>
655 <dd> The LACP system priority of this <ref table="Port"/>. In
656 LACP negotiations, link status decisions are made by the system
657 with the numerically lower priority. Must be a number between 1
659 <dt><code>lacp-time</code></dt>
660 <dd> The LACP timing which should be used on this
661 <ref table="Port"/>. Possible values are <code>fast</code> and
662 <code>slow</code>. By default <code>slow</code> is used. When
663 configured to be <code>fast</code> more frequent LACP heartbeats
664 will be requested causing connectivity problems to be detected more
666 <dt><code>lacp-strict</code></dt>
667 <dd> When <code>true</code>, configures this <ref table="Port"/> to
668 require successful LACP negotiations to enable any slaves.
669 Defaults to <code>false</code> which safely allows LACP to be used
670 with switchs that do not support the protocol.</dd>
676 <table name="Interface" title="One physical network device in a Port.">
677 An interface within a <ref table="Port"/>.
679 <group title="Core Features">
681 Interface name. Should be alphanumeric and no more than about 8 bytes
682 long. May be the same as the port name, for non-bonded ports. Must
683 otherwise be unique among the names of ports, interfaces, and bridges
688 <p>Ethernet address to set for this interface. If unset then the
689 default MAC address is used:</p>
691 <li>For the local interface, the default is the lowest-numbered MAC
692 address among the other bridge ports, either the value of the
693 <ref table="Port" column="mac"/> in its <ref table="Port"/> record,
694 if set, or its actual MAC (for bonded ports, the MAC of its slave
695 whose name is first in alphabetical order). Internal ports and
696 bridge ports that are used as port mirroring destinations (see the
697 <ref table="Mirror"/> table) are ignored.</li>
698 <li>For other internal interfaces, the default MAC is randomly
700 <li>External interfaces typically have a MAC address associated with
703 <p>Some interfaces may not have a software-controllable MAC
707 <column name="ofport">
708 <p>OpenFlow port number for this interface. Unlike most columns, this
709 column's value should be set only by Open vSwitch itself. Other
710 clients should set this column to an empty set (the default) when
711 creating an <ref table="Interface"/>.</p>
712 <p>Open vSwitch populates this column when the port number becomes
713 known. If the interface is successfully added,
714 <ref column="ofport"/> will be set to a number between 1 and 65535
715 (generally either in the range 1 to 65279, inclusive, or 65534, the
716 port number for the OpenFlow ``local port''). If the interface
717 cannot be added then Open vSwitch sets this column
722 <group title="System-Specific Details">
724 The interface type, one of:
726 <dt><code>system</code></dt>
727 <dd>An ordinary network device, e.g. <code>eth0</code> on Linux.
728 Sometimes referred to as ``external interfaces'' since they are
729 generally connected to hardware external to that on which the Open
730 vSwitch is running. The empty string is a synonym for
731 <code>system</code>.</dd>
732 <dt><code>internal</code></dt>
733 <dd>A simulated network device that sends and receives traffic. An
734 internal interface whose <ref column="name"/> is the same as its
735 bridge's <ref table="Open_vSwitch" column="name"/> is called the
736 ``local interface.'' It does not make sense to bond an internal
737 interface, so the terms ``port'' and ``interface'' are often used
738 imprecisely for internal interfaces.</dd>
739 <dt><code>tap</code></dt>
740 <dd>A TUN/TAP device managed by Open vSwitch.</dd>
741 <dt><code>gre</code></dt>
742 <dd>An Ethernet over RFC 2890 Generic Routing Encapsulation over IPv4
743 tunnel. Each tunnel must be uniquely identified by the
744 combination of <code>remote_ip</code>, <code>local_ip</code>, and
745 <code>in_key</code>. Note that if two ports are defined that are
746 the same except one has an optional identifier and the other does
747 not, the more specific one is matched first. <code>in_key</code>
748 is considered more specific than <code>local_ip</code> if a port
749 defines one and another port defines the other. The following
750 options may be specified in the <ref column="options"/> column:
752 <dt><code>remote_ip</code></dt>
753 <dd>Required. The tunnel endpoint.</dd>
756 <dt><code>local_ip</code></dt>
757 <dd>Optional. The destination IP that received packets must
758 match. Default is to match all addresses.</dd>
761 <dt><code>in_key</code></dt>
762 <dd>Optional. The GRE key that received packets must contain.
763 It may either be a 32-bit number (no key and a key of 0 are
764 treated as equivalent) or the word <code>flow</code>. If
765 <code>flow</code> is specified then any key will be accepted
766 and the key will be placed in the <code>tun_id</code> field
767 for matching in the flow table. The ovs-ofctl manual page
768 contains additional information about matching fields in
769 OpenFlow flows. Default is no key.</dd>
772 <dt><code>out_key</code></dt>
773 <dd>Optional. The GRE key to be set on outgoing packets. It may
774 either be a 32-bit number or the word <code>flow</code>. If
775 <code>flow</code> is specified then the key may be set using
776 the <code>set_tunnel</code> Nicira OpenFlow vendor extension (0
777 is used in the absence of an action). The ovs-ofctl manual
778 page contains additional information about the Nicira OpenFlow
779 vendor extensions. Default is no key.</dd>
782 <dt><code>key</code></dt>
783 <dd>Optional. Shorthand to set <code>in_key</code> and
784 <code>out_key</code> at the same time.</dd>
787 <dt><code>tos</code></dt>
788 <dd>Optional. The value of the ToS bits to be set on the
789 encapsulating packet. It may also be the word
790 <code>inherit</code>, in which case the ToS will be copied from
791 the inner packet if it is IPv4 or IPv6 (otherwise it will be
792 0). Note that the ECN fields are always inherited. Default is
796 <dt><code>ttl</code></dt>
797 <dd>Optional. The TTL to be set on the encapsulating packet.
798 It may also be the word <code>inherit</code>, in which case the
799 TTL will be copied from the inner packet if it is IPv4 or IPv6
800 (otherwise it will be the system default, typically 64).
801 Default is the system default TTL.</dd>
804 <dt><code>csum</code></dt>
805 <dd>Optional. Compute GRE checksums on outgoing packets.
806 Checksums present on incoming packets will be validated
807 regardless of this setting. Note that GRE checksums
808 impose a significant performance penalty as they cover the
809 entire packet. As the contents of the packet is typically
810 covered by L3 and L4 checksums, this additional checksum only
811 adds value for the GRE and encapsulated Ethernet headers.
812 Default is disabled, set to <code>true</code> to enable.</dd>
815 <dt><code>pmtud</code></dt>
816 <dd>Optional. Enable tunnel path MTU discovery. If enabled
817 ``ICMP destination unreachable - fragmentation'' needed
818 messages will be generated for IPv4 packets with the DF bit set
819 and IPv6 packets above the minimum MTU if the packet size
820 exceeds the path MTU minus the size of the tunnel headers. It
821 also forces the encapsulating packet DF bit to be set (it is
822 always set if the inner packet implies path MTU discovery).
823 Note that this option causes behavior that is typically
824 reserved for routers and therefore is not entirely in
825 compliance with the IEEE 802.1D specification for bridges.
826 Default is enabled, set to <code>false</code> to disable.</dd>
829 <dt><code>header_cache</code></dt>
830 <dd>Optional. Enable caching of tunnel headers and the output
831 path. This can lead to a significant performance increase
832 without changing behavior. In general it should not be
833 necessary to adjust this setting. However, the caching can
834 bypass certain components of the IP stack (such as IP tables)
835 and it may be useful to disable it if these features are
836 required or as a debugging measure. Default is enabled, set to
837 <code>false</code> to disable.</dd>
840 <dt><code>ipsec_gre</code></dt>
841 <dd>An Ethernet over RFC 2890 Generic Routing Encapsulation
842 over IPv4 IPsec tunnel. Each tunnel (including those of type
843 <code>gre</code>) must be uniquely identified by the
844 combination of <code>remote_ip</code> and
845 <code>local_ip</code>. Note that if two ports are defined
846 that are the same except one has an optional identifier and
847 the other does not, the more specific one is matched first.
848 An authentication method of <code>peer_cert</code> or
849 <code>psk</code> must be defined. The following options may
850 be specified in the <ref column="options"/> column:
852 <dt><code>remote_ip</code></dt>
853 <dd>Required. The tunnel endpoint.</dd>
856 <dt><code>local_ip</code></dt>
857 <dd>Optional. The destination IP that received packets must
858 match. Default is to match all addresses.</dd>
861 <dt><code>peer_cert</code></dt>
862 <dd>Required for certificate authentication. A string
863 containing the peer's certificate in PEM format.
864 Additionally the host's certificate must be specified
865 with the <code>certificate</code> option.</dd>
868 <dt><code>certificate</code></dt>
869 <dd>Required for certificate authentication. The name of a
870 PEM file containing a certificate that will be presented
871 to the peer during authentication.</dd>
874 <dt><code>private_key</code></dt>
875 <dd>Optional for certificate authentication. The name of
876 a PEM file containing the private key associated with
877 <code>certificate</code>. If <code>certificate</code>
878 contains the private key, this option may be omitted.</dd>
881 <dt><code>psk</code></dt>
882 <dd>Required for pre-shared key authentication. Specifies a
883 pre-shared key for authentication that must be identical on
884 both sides of the tunnel.</dd>
887 <dt><code>in_key</code></dt>
888 <dd>Optional. The GRE key that received packets must contain.
889 It may either be a 32-bit number (no key and a key of 0 are
890 treated as equivalent) or the word <code>flow</code>. If
891 <code>flow</code> is specified then any key will be accepted
892 and the key will be placed in the <code>tun_id</code> field
893 for matching in the flow table. The ovs-ofctl manual page
894 contains additional information about matching fields in
895 OpenFlow flows. Default is no key.</dd>
898 <dt><code>out_key</code></dt>
899 <dd>Optional. The GRE key to be set on outgoing packets. It may
900 either be a 32-bit number or the word <code>flow</code>. If
901 <code>flow</code> is specified then the key may be set using
902 the <code>set_tunnel</code> Nicira OpenFlow vendor extension (0
903 is used in the absence of an action). The ovs-ofctl manual
904 page contains additional information about the Nicira OpenFlow
905 vendor extensions. Default is no key.</dd>
908 <dt><code>key</code></dt>
909 <dd>Optional. Shorthand to set <code>in_key</code> and
910 <code>out_key</code> at the same time.</dd>
913 <dt><code>tos</code></dt>
914 <dd>Optional. The value of the ToS bits to be set on the
915 encapsulating packet. It may also be the word
916 <code>inherit</code>, in which case the ToS will be copied from
917 the inner packet if it is IPv4 or IPv6 (otherwise it will be
918 0). Note that the ECN fields are always inherited. Default is
922 <dt><code>ttl</code></dt>
923 <dd>Optional. The TTL to be set on the encapsulating packet.
924 It may also be the word <code>inherit</code>, in which case the
925 TTL will be copied from the inner packet if it is IPv4 or IPv6
926 (otherwise it will be the system default, typically 64).
927 Default is the system default TTL.</dd>
930 <dt><code>csum</code></dt>
931 <dd>Optional. Compute GRE checksums on outgoing packets.
932 Checksums present on incoming packets will be validated
933 regardless of this setting. Note that GRE checksums
934 impose a significant performance penalty as they cover the
935 entire packet. As the contents of the packet is typically
936 covered by L3 and L4 checksums, this additional checksum only
937 adds value for the GRE and encapsulated Ethernet headers.
938 Default is disabled, set to <code>true</code> to enable.</dd>
941 <dt><code>pmtud</code></dt>
942 <dd>Optional. Enable tunnel path MTU discovery. If enabled
943 ``ICMP destination unreachable - fragmentation'' needed
944 messages will be generated for IPv4 packets with the DF bit set
945 and IPv6 packets above the minimum MTU if the packet size
946 exceeds the path MTU minus the size of the tunnel headers. It
947 also forces the encapsulating packet DF bit to be set (it is
948 always set if the inner packet implies path MTU discovery).
949 Note that this option causes behavior that is typically
950 reserved for routers and therefore is not entirely in
951 compliance with the IEEE 802.1D specification for bridges.
952 Default is enabled, set to <code>false</code> to disable.</dd>
955 <dt><code>capwap</code></dt>
956 <dd>Ethernet tunneling over the UDP transport portion of CAPWAP
957 (RFC 5415). This allows interoperability with certain switches
958 where GRE is not available. Note that only the tunneling component
959 of the protocol is implemented. Due to the non-standard use of
960 CAPWAP, UDP ports 58881 and 58882 are used as the source and
961 destination ports respectively. Each tunnel must be uniquely
962 identified by the combination of <code>remote_ip</code> and
963 <code>local_ip</code>. If two ports are defined that are the same
964 except one includes <code>local_ip</code> and the other does not,
965 the more specific one is matched first. CAPWAP support is not
966 available on all platforms. Currently it is only supported in the
967 Linux kernel module with kernel versions >= 2.6.25. The following
968 options may be specified in the <ref column="options"/> column:
970 <dt><code>remote_ip</code></dt>
971 <dd>Required. The tunnel endpoint.</dd>
974 <dt><code>local_ip</code></dt>
975 <dd>Optional. The destination IP that received packets must
976 match. Default is to match all addresses.</dd>
979 <dt><code>tos</code></dt>
980 <dd>Optional. The value of the ToS bits to be set on the
981 encapsulating packet. It may also be the word
982 <code>inherit</code>, in which case the ToS will be copied from
983 the inner packet if it is IPv4 or IPv6 (otherwise it will be
984 0). Note that the ECN fields are always inherited. Default is
988 <dt><code>ttl</code></dt>
989 <dd>Optional. The TTL to be set on the encapsulating packet.
990 It may also be the word <code>inherit</code>, in which case the
991 TTL will be copied from the inner packet if it is IPv4 or IPv6
992 (otherwise it will be the system default, typically 64).
993 Default is the system default TTL.</dd>
996 <dt><code>pmtud</code></dt>
997 <dd>Optional. Enable tunnel path MTU discovery. If enabled
998 ``ICMP destination unreachable - fragmentation'' needed
999 messages will be generated for IPv4 packets with the DF bit set
1000 and IPv6 packets above the minimum MTU if the packet size
1001 exceeds the path MTU minus the size of the tunnel headers. It
1002 also forces the encapsulating packet DF bit to be set (it is
1003 always set if the inner packet implies path MTU discovery).
1004 Note that this option causes behavior that is typically
1005 reserved for routers and therefore is not entirely in
1006 compliance with the IEEE 802.1D specification for bridges.
1007 Default is enabled, set to <code>false</code> to disable.</dd>
1010 <dt><code>header_cache</code></dt>
1011 <dd>Optional. Enable caching of tunnel headers and the output
1012 path. This can lead to a significant performance increase
1013 without changing behavior. In general it should not be
1014 necessary to adjust this setting. However, the caching can
1015 bypass certain components of the IP stack (such as IP tables)
1016 and it may be useful to disable it if these features are
1017 required or as a debugging measure. Default is enabled, set to
1018 <code>false</code> to disable.</dd>
1021 <dt><code>patch</code></dt>
1024 A pair of virtual devices that act as a patch cable. The <ref
1025 column="options"/> column must have the following key-value pair:
1028 <dt><code>peer</code></dt>
1030 The <ref column="name"/> of the <ref table="Interface"/> for
1031 the other side of the patch. The named <ref
1032 table="Interface"/>'s own <code>peer</code> option must specify
1033 this <ref table="Interface"/>'s name. That is, the two patch
1034 interfaces must have reversed <ref column="name"/> and
1035 <code>peer</code> values.
1042 <column name="options">
1043 Configuration options whose interpretation varies based on
1044 <ref column="type"/>.
1048 <group title="Interface Status">
1050 Status information about interfaces attached to bridges, updated every
1051 5 seconds. Not all interfaces have all of these properties; virtual
1052 interfaces don't have a link speed, for example. Non-applicable
1053 columns will have empty values.
1055 <column name="admin_state">
1057 The administrative state of the physical network link.
1061 <column name="link_state">
1063 The observed state of the physical network link. This is ordinarily
1064 the link's carrier status. If the interface's <ref table="Port"/> is
1065 a bond configured for miimon monitoring, it is instead the network
1066 link's miimon status.
1070 <column name="link_speed">
1072 The negotiated speed of the physical network link.
1073 Valid values are positive integers greater than 0.
1077 <column name="duplex">
1079 The duplex mode of the physical network link.
1085 The MTU (maximum transmission unit); i.e. the largest
1086 amount of data that can fit into a single Ethernet frame.
1087 The standard Ethernet MTU is 1500 bytes. Some physical media
1088 and many kinds of virtual interfaces can be configured with
1092 This column will be empty for an interface that does not
1093 have an MTU as, for example, some kinds of tunnels do not.
1097 <column name="status">
1099 Key-value pairs that report port status. Supported status
1100 values are <code>type</code>-dependent; some interfaces may not have
1101 a valid <code>driver_name</code>, for example.
1103 <p>The currently defined key-value pairs are:</p>
1105 <dt><code>driver_name</code></dt>
1106 <dd>The name of the device driver controlling the network
1110 <dt><code>driver_version</code></dt>
1111 <dd>The version string of the device driver controlling the
1112 network adapter.</dd>
1115 <dt><code>firmware_version</code></dt>
1116 <dd>The version string of the network adapter's firmware, if
1120 <dt><code>source_ip</code></dt>
1121 <dd>The source IP address used for an IPv4 tunnel end-point,
1122 such as <code>gre</code> or <code>capwap</code>.</dd>
1125 <dt><code>tunnel_egress_iface</code></dt>
1126 <dd>Egress interface for tunnels. Currently only relevant for GRE
1127 and CAPWAP tunnels. On Linux systems, this column will show
1128 the name of the interface which is responsible for routing
1129 traffic destined for the configured <code>remote_ip</code>.
1130 This could be an internal interface such as a bridge port.</dd>
1133 <dt><code>tunnel_egress_iface_carrier</code></dt>
1134 <dd>Whether a carrier is detected on <ref
1135 column="tunnel_egress_iface"/>. Valid values are <code>down</code>
1136 and <code>up</code>.</dd>
1141 <group title="Ingress Policing">
1143 These settings control ingress policing for packets received on this
1144 interface. On a physical interface, this limits the rate at which
1145 traffic is allowed into the system from the outside; on a virtual
1146 interface (one connected to a virtual machine), this limits the rate at
1147 which the VM is able to transmit.
1150 Policing is a simple form of quality-of-service that simply drops
1151 packets received in excess of the configured rate. Due to its
1152 simplicity, policing is usually less accurate and less effective than
1153 egress QoS (which is configured using the <ref table="QoS"/> and <ref
1154 table="Queue"/> tables).
1157 Policing is currently implemented only on Linux. The Linux
1158 implementation uses a simple ``token bucket'' approach:
1162 The size of the bucket corresponds to <ref
1163 column="ingress_policing_burst"/>. Initially the bucket is full.
1166 Whenever a packet is received, its size (converted to tokens) is
1167 compared to the number of tokens currently in the bucket. If the
1168 required number of tokens are available, they are removed and the
1169 packet is forwarded. Otherwise, the packet is dropped.
1172 Whenever it is not full, the bucket is refilled with tokens at the
1173 rate specified by <ref column="ingress_policing_rate"/>.
1177 Policing interacts badly with some network protocols, and especially
1178 with fragmented IP packets. Suppose that there is enough network
1179 activity to keep the bucket nearly empty all the time. Then this token
1180 bucket algorithm will forward a single packet every so often, with the
1181 period depending on packet size and on the configured rate. All of the
1182 fragments of an IP packets are normally transmitted back-to-back, as a
1183 group. In such a situation, therefore, only one of these fragments
1184 will be forwarded and the rest will be dropped. IP does not provide
1185 any way for the intended recipient to ask for only the remaining
1186 fragments. In such a case there are two likely possibilities for what
1187 will happen next: either all of the fragments will eventually be
1188 retransmitted (as TCP will do), in which case the same problem will
1189 recur, or the sender will not realize that its packet has been dropped
1190 and data will simply be lost (as some UDP-based protocols will do).
1191 Either way, it is possible that no forward progress will ever occur.
1193 <column name="ingress_policing_rate">
1195 Maximum rate for data received on this interface, in kbps. Data
1196 received faster than this rate is dropped. Set to <code>0</code>
1197 (the default) to disable policing.
1201 <column name="ingress_policing_burst">
1202 <p>Maximum burst size for data received on this interface, in kb. The
1203 default burst size if set to <code>0</code> is 1000 kb. This value
1204 has no effect if <ref column="ingress_policing_rate"/>
1205 is <code>0</code>.</p>
1207 Specifying a larger burst size lets the algorithm be more forgiving,
1208 which is important for protocols like TCP that react severely to
1209 dropped packets. The burst size should be at least the size of the
1210 interface's MTU. Specifying a value that is numerically at least as
1211 large as 10% of <ref column="ingress_policing_rate"/> helps TCP come
1212 closer to achieving the full rate.
1217 <group title="Other Features">
1219 <column name="monitor">
1220 Connectivity monitor configuration for this interface.
1223 <column name="lacp_current">
1224 Boolean value indicating LACP status for this interface. If true, this
1225 interface has current LACP information about its LACP partner. This
1226 information may be used to monitor the health of interfaces in a LACP
1227 enabled port. This column will be empty if LACP is not enabled.
1230 <column name="external_ids">
1231 Key-value pairs for use by external frameworks that integrate
1232 with Open vSwitch, rather than by Open vSwitch itself. System
1233 integrators should either use the Open vSwitch development
1234 mailing list to coordinate on common key-value definitions, or
1235 choose key names that are likely to be unique. The currently
1236 defined common key-value pairs are:
1238 <dt><code>attached-mac</code></dt>
1240 The MAC address programmed into the ``virtual hardware'' for this
1241 interface, in the form
1242 <var>xx</var>:<var>xx</var>:<var>xx</var>:<var>xx</var>:<var>xx</var>:<var>xx</var>.
1243 For Citrix XenServer, this is the value of the <code>MAC</code>
1244 field in the VIF record for this interface.</dd>
1245 <dt><code>iface-id</code></dt>
1246 <dd>A system-unique identifier for the interface. On XenServer,
1247 this will commonly be the same as <code>xs-vif-uuid</code>.</dd>
1250 Additionally the following key-value pairs specifically
1251 apply to an interface that represents a virtual Ethernet interface
1252 connected to a virtual machine. These key-value pairs should not be
1253 present for other types of interfaces. Keys whose names end
1254 in <code>-uuid</code> have values that uniquely identify the entity
1255 in question. For a Citrix XenServer hypervisor, these values are
1256 UUIDs in RFC 4122 format. Other hypervisors may use other
1259 <p>The currently defined key-value pairs for XenServer are:</p>
1261 <dt><code>xs-vif-uuid</code></dt>
1262 <dd>The virtual interface associated with this interface.</dd>
1263 <dt><code>xs-network-uuid</code></dt>
1264 <dd>The virtual network to which this interface is attached.</dd>
1265 <dt><code>xs-vm-uuid</code></dt>
1266 <dd>The VM to which this interface belongs.</dd>
1270 <column name="other_config">
1271 Key-value pairs for rarely used interface features.
1273 <dt><code>lacp-port-id</code></dt>
1274 <dd> The LACP port ID of this <ref table="Interface"/>. Port IDs are
1275 used in LACP negotiations to identify individual ports
1276 participating in a bond. Must be a number between 1 and
1278 <dt><code>lacp-port-priority</code></dt>
1279 <dd> The LACP port priority of this <ref table="Interface"/>. In
1280 LACP negotiations <ref table="Interface"/>s with numerically lower
1281 priorities are preferred for aggregation. Must be a number between
1286 <column name="statistics">
1288 Key-value pairs that report interface statistics. The current
1289 implementation updates these counters periodically. In the future,
1290 we plan to, instead, update them when an interface is created, when
1291 they are queried (e.g. using an OVSDB <code>select</code> operation),
1292 and just before an interface is deleted due to virtual interface
1293 hot-unplug or VM shutdown, and perhaps at other times, but not on any
1294 regular periodic basis.</p>
1296 The currently defined key-value pairs are listed below. These are
1297 the same statistics reported by OpenFlow in its <code>struct
1298 ofp_port_stats</code> structure. If an interface does not support a
1299 given statistic, then that pair is omitted.</p>
1302 Successful transmit and receive counters:
1304 <dt><code>rx_packets</code></dt>
1305 <dd>Number of received packets.</dd>
1306 <dt><code>rx_bytes</code></dt>
1307 <dd>Number of received bytes.</dd>
1308 <dt><code>tx_packets</code></dt>
1309 <dd>Number of transmitted packets.</dd>
1310 <dt><code>tx_bytes</code></dt>
1311 <dd>Number of transmitted bytes.</dd>
1317 <dt><code>rx_dropped</code></dt>
1318 <dd>Number of packets dropped by RX.</dd>
1319 <dt><code>rx_frame_err</code></dt>
1320 <dd>Number of frame alignment errors.</dd>
1321 <dt><code>rx_over_err</code></dt>
1322 <dd>Number of packets with RX overrun.</dd>
1323 <dt><code>rx_crc_err</code></dt>
1324 <dd>Number of CRC errors.</dd>
1325 <dt><code>rx_errors</code></dt>
1327 Total number of receive errors, greater than or equal
1328 to the sum of the above.
1335 <dt><code>tx_dropped</code></dt>
1336 <dd>Number of packets dropped by TX.</dd>
1337 <dt><code>collisions</code></dt>
1338 <dd>Number of collisions.</dd>
1339 <dt><code>tx_errors</code></dt>
1341 Total number of transmit errors, greater
1342 than or equal to the sum of the above.
1351 <table name="QoS" title="Quality of Service configuration">
1352 <p>Quality of Service (QoS) configuration for each Port that
1355 <column name="type">
1356 <p>The type of QoS to implement. The <ref table="Open_vSwitch"
1357 column="capabilities"/> column in the <ref table="Open_vSwitch"/> table
1358 identifies the types that a switch actually supports. The currently
1359 defined types are listed below:</p>
1361 <dt><code>linux-htb</code></dt>
1363 Linux ``hierarchy token bucket'' classifier. See tc-htb(8) (also at
1364 <code>http://linux.die.net/man/8/tc-htb</code>) and the HTB manual
1365 (<code>http://luxik.cdi.cz/~devik/qos/htb/manual/userg.htm</code>)
1366 for information on how this classifier works and how to configure it.
1370 <dt><code>linux-hfsc</code></dt>
1372 Linux "Hierarchical Fair Service Curve" classifier.
1373 See <code>http://linux-ip.net/articles/hfsc.en/</code> for
1374 information on how this classifier works.
1379 <column name="queues">
1380 <p>A map from queue numbers to <ref table="Queue"/> records. The
1381 supported range of queue numbers depend on <ref column="type"/>. The
1382 queue numbers are the same as the <code>queue_id</code> used in
1383 OpenFlow in <code>struct ofp_action_enqueue</code> and other
1384 structures. Queue 0 is used by OpenFlow output actions that do not
1385 specify a specific queue.</p>
1388 <column name="other_config">
1389 <p>Key-value pairs for configuring QoS features that depend on
1390 <ref column="type"/>.</p>
1391 <p>The <code>linux-htb</code> and <code>linux-hfsc</code> classes support
1392 the following key-value pairs:</p>
1394 <dt><code>max-rate</code></dt>
1395 <dd>Maximum rate shared by all queued traffic, in bit/s.
1396 Optional. If not specified, for physical interfaces, the
1397 default is the link rate. For other interfaces or if the
1398 link rate cannot be determined, the default is currently 100
1403 <column name="external_ids">
1404 Key-value pairs for use by external frameworks that integrate with Open
1405 vSwitch, rather than by Open vSwitch itself. System integrators should
1406 either use the Open vSwitch development mailing list to coordinate on
1407 common key-value definitions, or choose key names that are likely to be
1408 unique. No common key-value pairs are currently defined.
1412 <table name="Queue" title="QoS output queue.">
1413 <p>A configuration for a port output queue, used in configuring Quality of
1414 Service (QoS) features. May be referenced by <ref column="queues"
1415 table="QoS"/> column in <ref table="QoS"/> table.</p>
1417 <column name="other_config">
1418 <p>Key-value pairs for configuring the output queue. The supported
1419 key-value pairs and their meanings depend on the <ref column="type"/>
1420 of the <ref column="QoS"/> records that reference this row.</p>
1421 <p>The key-value pairs defined for <ref table="QoS"/> <ref table="QoS"
1422 column="type"/> of <code>min-rate</code> are:</p>
1424 <dt><code>min-rate</code></dt>
1425 <dd>Minimum guaranteed bandwidth, in bit/s. Required. The
1426 floor value is 1500 bytes/s (12,000 bit/s).</dd>
1428 <p>The key-value pairs defined for <ref table="QoS"/> <ref table="QoS"
1429 column="type"/> of <code>linux-htb</code> are:</p>
1431 <dt><code>min-rate</code></dt>
1432 <dd>Minimum guaranteed bandwidth, in bit/s.</dd>
1433 <dt><code>max-rate</code></dt>
1434 <dd>Maximum allowed bandwidth, in bit/s. Optional. If specified, the
1435 queue's rate will not be allowed to exceed the specified value, even
1436 if excess bandwidth is available. If unspecified, defaults to no
1438 <dt><code>burst</code></dt>
1439 <dd>Burst size, in bits. This is the maximum amount of ``credits''
1440 that a queue can accumulate while it is idle. Optional. Details of
1441 the <code>linux-htb</code> implementation require a minimum burst
1442 size, so a too-small <code>burst</code> will be silently
1444 <dt><code>priority</code></dt>
1445 <dd>A nonnegative 32-bit integer. Defaults to 0 if
1446 unspecified. A queue with a smaller <code>priority</code>
1447 will receive all the excess bandwidth that it can use before
1448 a queue with a larger value receives any. Specific priority
1449 values are unimportant; only relative ordering matters.</dd>
1451 <p>The key-value pairs defined for <ref table="QoS"/> <ref table="QoS"
1452 column="type"/> of <code>linux-hfsc</code> are:</p>
1454 <dt><code>min-rate</code></dt>
1455 <dd>Minimum guaranteed bandwidth, in bit/s.</dd>
1456 <dt><code>max-rate</code></dt>
1457 <dd>Maximum allowed bandwidth, in bit/s. Optional. If specified, the
1458 queue's rate will not be allowed to exceed the specified value, even
1459 if excess bandwidth is available. If unspecified, defaults to no
1464 <column name="external_ids">
1465 Key-value pairs for use by external frameworks that integrate with Open
1466 vSwitch, rather than by Open vSwitch itself. System integrators should
1467 either use the Open vSwitch development mailing list to coordinate on
1468 common key-value definitions, or choose key names that are likely to be
1469 unique. No common key-value pairs are currently defined.
1473 <table name="Monitor" title="Connectivity Monitor configuration">
1475 A <ref table="Monitor"/> attaches to an <ref table="Interface"/> to
1476 implement 802.1ag Connectivity Fault Management (CFM). CFM allows a
1477 group of Maintenance Points (MPs) called a Maintenance Association (MA)
1478 to detect connectivity problems with each other. MPs within a MA should
1479 have complete and exclusive interconnectivity. This is verified by
1480 occasionally broadcasting Continuity Check Messages (CCMs) at a
1481 configurable transmission interval. A <ref table="Monitor"/> is
1482 responsible for collecting data about other MPs in its MA and
1486 <group title="Monitor Configuration">
1487 <column name="mpid">
1488 A Maintenance Point ID (MPID) uniquely identifies each endpoint within
1489 a Maintenance Association (see <ref column="ma_name"/>). The MPID is
1490 used to identify this <ref table="Monitor"/> to other endpoints in the
1494 <column name="remote_mps">
1495 A set of <ref table="Maintenance_Points"/> which this
1496 <ref table="Monitor"/> should have connectivity to. If this
1497 <ref table="Monitor"/> does not have connectivity to any MPs in this
1498 set, or has connectivity to any MPs not in this set, a fault is
1502 <column name="ma_name">
1503 A Maintenance Association (MA) name pairs with a Maintenance Domain
1504 (MD) name to uniquely identify a MA. A MA is a group of endpoints who
1505 have complete and exclusive interconnectivity. Defaults to
1506 <code>ovs</code> if unset.
1509 <column name="md_name">
1510 A Maintenance Domain name pairs with a Maintenance Association name to
1511 uniquely identify a MA. Defaults to <code>ovs</code> if unset.
1514 <column name="interval">
1515 The transmission interval of CCMs in milliseconds. Three missed CCMs
1516 indicate a connectivity fault. Defaults to 1000ms.
1520 <group title="Monitor Status">
1521 <column name="fault">
1522 Indicates a Connectivity Fault caused by a configuration error, a down
1523 remote MP, or unexpected connectivity to a remote MAID or remote MP.
1528 <table name="Maintenance_Point" title="Maintenance Point configuration">
1530 A <ref table="Maintenance_Point"/> represents a MP which a
1531 <ref table="Monitor"/> has or should have connectivity to.
1534 <group title="Maintenance_Point Configuration">
1535 <column name="mpid">
1536 A Maintenance Point ID (MPID) uniquely identifies each endpoint within
1537 a Maintenance Association. All MPs within a MA should have a unique
1542 <group title="Maintenance_Point Status">
1543 <column name="fault">
1544 Indicates a connectivity fault.
1549 <table name="Mirror" title="Port mirroring (SPAN/RSPAN).">
1550 <p>A port mirror within a <ref table="Bridge"/>.</p>
1551 <p>A port mirror configures a bridge to send selected frames to special
1552 ``mirrored'' ports, in addition to their normal destinations. Mirroring
1553 traffic may also be referred to as SPAN or RSPAN, depending on the
1554 mechanism used for delivery.</p>
1556 <column name="name">
1557 Arbitrary identifier for the <ref table="Mirror"/>.
1560 <group title="Selecting Packets for Mirroring">
1562 To be selected for mirroring, a given packet must enter or leave the
1563 bridge through a selected port and it must also be in one of the
1567 <column name="select_all">
1568 If true, every packet arriving or departing on any port is
1569 selected for mirroring.
1572 <column name="select_dst_port">
1573 Ports on which departing packets are selected for mirroring.
1576 <column name="select_src_port">
1577 Ports on which arriving packets are selected for mirroring.
1580 <column name="select_vlan">
1581 VLANs on which packets are selected for mirroring. An empty set
1582 selects packets on all VLANs.
1586 <group title="Mirroring Destination Configuration">
1588 These columns are mutually exclusive. Exactly one of them must be
1592 <column name="output_port">
1593 <p>Output port for selected packets, if nonempty.</p>
1594 <p>Specifying a port for mirror output reserves that port exclusively
1595 for mirroring. No frames other than those selected for mirroring
1596 will be forwarded to the port, and any frames received on the port
1597 will be discarded.</p>
1598 <p>This type of mirroring is sometimes called SPAN.</p>
1601 <column name="output_vlan">
1602 <p>Output VLAN for selected packets, if nonempty.</p>
1603 <p>The frames will be sent out all ports that trunk
1604 <ref column="output_vlan"/>, as well as any ports with implicit VLAN
1605 <ref column="output_vlan"/>. When a mirrored frame is sent out a
1606 trunk port, the frame's VLAN tag will be set to
1607 <ref column="output_vlan"/>, replacing any existing tag; when it is
1608 sent out an implicit VLAN port, the frame will not be tagged. This
1609 type of mirroring is sometimes called RSPAN.</p>
1610 <p><em>Please note:</em> Mirroring to a VLAN can disrupt a network that
1611 contains unmanaged switches. Consider an unmanaged physical switch
1612 with two ports: port 1, connected to an end host, and port 2,
1613 connected to an Open vSwitch configured to mirror received packets
1614 into VLAN 123 on port 2. Suppose that the end host sends a packet on
1615 port 1 that the physical switch forwards to port 2. The Open vSwitch
1616 forwards this packet to its destination and then reflects it back on
1617 port 2 in VLAN 123. This reflected packet causes the unmanaged
1618 physical switch to replace the MAC learning table entry, which
1619 correctly pointed to port 1, with one that incorrectly points to port
1620 2. Afterward, the physical switch will direct packets destined for
1621 the end host to the Open vSwitch on port 2, instead of to the end
1622 host on port 1, disrupting connectivity. If mirroring to a VLAN is
1623 desired in this scenario, then the physical switch must be replaced
1624 by one that learns Ethernet addresses on a per-VLAN basis. In
1625 addition, learning should be disabled on the VLAN containing mirrored
1626 traffic. If this is not done then intermediate switches will learn
1627 the MAC address of each end host from the mirrored traffic. If
1628 packets being sent to that end host are also mirrored, then they will
1629 be dropped since the switch will attempt to send them out the input
1630 port. Disabling learning for the VLAN will cause the switch to
1631 correctly send the packet out all ports configured for that VLAN. If
1632 Open vSwitch is being used as an intermediate switch, learning can be
1633 disabled by adding the mirrored VLAN to <ref column="flood_vlans"/>
1634 in the appropriate <ref table="Bridge"/> table or tables.</p>
1638 <group title="Other Features">
1639 <column name="external_ids">
1640 Key-value pairs for use by external frameworks that integrate with Open
1641 vSwitch, rather than by Open vSwitch itself. System integrators should
1642 either use the Open vSwitch development mailing list to coordinate on
1643 common key-value definitions, or choose key names that are likely to be
1644 unique. No common key-value pairs are currently defined.
1649 <table name="Controller" title="OpenFlow controller configuration.">
1650 <p>An OpenFlow controller.</p>
1653 Open vSwitch supports two kinds of OpenFlow controllers:
1657 <dt>Primary controllers</dt>
1660 This is the kind of controller envisioned by the OpenFlow 1.0
1661 specification. Usually, a primary controller implements a network
1662 policy by taking charge of the switch's flow table.
1666 Open vSwitch initiates and maintains persistent connections to
1667 primary controllers, retrying the connection each time it fails or
1668 drops. The <ref table="Bridge" column="fail_mode"/> column in the
1669 <ref table="Bridge"/> table applies to primary controllers.
1673 Open vSwitch permits a bridge to have any number of primary
1674 controllers. When multiple controllers are configured, Open
1675 vSwitch connects to all of them simultaneously. Because
1676 OpenFlow 1.0 does not specify how multiple controllers
1677 coordinate in interacting with a single switch, more than
1678 one primary controller should be specified only if the
1679 controllers are themselves designed to coordinate with each
1680 other. (The Nicira-defined <code>NXT_ROLE</code> OpenFlow
1681 vendor extension may be useful for this.)
1684 <dt>Service controllers</dt>
1687 These kinds of OpenFlow controller connections are intended for
1688 occasional support and maintenance use, e.g. with
1689 <code>ovs-ofctl</code>. Usually a service controller connects only
1690 briefly to inspect or modify some of a switch's state.
1694 Open vSwitch listens for incoming connections from service
1695 controllers. The service controllers initiate and, if necessary,
1696 maintain the connections from their end. The <ref table="Bridge"
1697 column="fail_mode"/> column in the <ref table="Bridge"/> table does
1698 not apply to service controllers.
1702 Open vSwitch supports configuring any number of service controllers.
1708 The <ref column="target"/> determines the type of controller.
1711 <group title="Core Features">
1712 <column name="target">
1713 <p>Connection method for controller.</p>
1715 The following connection methods are currently supported for primary
1719 <dt><code>ssl:<var>ip</var></code>[<code>:<var>port</var></code>]</dt>
1721 <p>The specified SSL <var>port</var> (default: 6633) on the host at
1722 the given <var>ip</var>, which must be expressed as an IP address
1723 (not a DNS name). The <ref table="Open_vSwitch" column="ssl"/>
1724 column in the <ref table="Open_vSwitch"/> table must point to a
1725 valid SSL configuration when this form is used.</p>
1726 <p>SSL support is an optional feature that is not always built as
1727 part of Open vSwitch.</p>
1729 <dt><code>tcp:<var>ip</var></code>[<code>:<var>port</var></code>]</dt>
1730 <dd>The specified TCP <var>port</var> (default: 6633) on the host at
1731 the given <var>ip</var>, which must be expressed as an IP address
1732 (not a DNS name).</dd>
1735 The following connection methods are currently supported for service
1739 <dt><code>pssl:</code>[<var>port</var>][<code>:<var>ip</var></code>]</dt>
1742 Listens for SSL connections on the specified TCP <var>port</var>
1743 (default: 6633). If <var>ip</var>, which must be expressed as an
1744 IP address (not a DNS name), is specified, then connections are
1745 restricted to the specified local IP address.
1748 The <ref table="Open_vSwitch" column="ssl"/> column in the <ref
1749 table="Open_vSwitch"/> table must point to a valid SSL
1750 configuration when this form is used.
1752 <p>SSL support is an optional feature that is not always built as
1753 part of Open vSwitch.</p>
1755 <dt><code>ptcp:</code>[<var>port</var>][<code>:<var>ip</var></code>]</dt>
1757 Listens for connections on the specified TCP <var>port</var>
1758 (default: 6633). If <var>ip</var>, which must be expressed as an
1759 IP address (not a DNS name), is specified, then connections are
1760 restricted to the specified local IP address.
1763 <p>When multiple controllers are configured for a single bridge, the
1764 <ref column="target"/> values must be unique. Duplicate
1765 <ref column="target"/> values yield unspecified results.</p>
1768 <column name="connection_mode">
1769 <p>If it is specified, this setting must be one of the following
1770 strings that describes how Open vSwitch contacts this OpenFlow
1771 controller over the network:</p>
1774 <dt><code>in-band</code></dt>
1775 <dd>In this mode, this controller's OpenFlow traffic travels over the
1776 bridge associated with the controller. With this setting, Open
1777 vSwitch allows traffic to and from the controller regardless of the
1778 contents of the OpenFlow flow table. (Otherwise, Open vSwitch
1779 would never be able to connect to the controller, because it did
1780 not have a flow to enable it.) This is the most common connection
1781 mode because it is not necessary to maintain two independent
1783 <dt><code>out-of-band</code></dt>
1784 <dd>In this mode, OpenFlow traffic uses a control network separate
1785 from the bridge associated with this controller, that is, the
1786 bridge does not use any of its own network devices to communicate
1787 with the controller. The control network must be configured
1788 separately, before or after <code>ovs-vswitchd</code> is started.
1792 <p>If not specified, the default is implementation-specific.</p>
1796 <group title="Controller Failure Detection and Handling">
1797 <column name="max_backoff">
1798 Maximum number of milliseconds to wait between connection attempts.
1799 Default is implementation-specific.
1802 <column name="inactivity_probe">
1803 Maximum number of milliseconds of idle time on connection to
1804 controller before sending an inactivity probe message. If Open
1805 vSwitch does not communicate with the controller for the specified
1806 number of seconds, it will send a probe. If a response is not
1807 received for the same additional amount of time, Open vSwitch
1808 assumes the connection has been broken and attempts to reconnect.
1809 Default is implementation-specific. A value of 0 disables
1814 <group title="OpenFlow Rate Limiting">
1815 <column name="controller_rate_limit">
1816 <p>The maximum rate at which packets in unknown flows will be
1817 forwarded to the OpenFlow controller, in packets per second. This
1818 feature prevents a single bridge from overwhelming the controller.
1819 If not specified, the default is implementation-specific.</p>
1820 <p>In addition, when a high rate triggers rate-limiting, Open
1821 vSwitch queues controller packets for each port and transmits
1822 them to the controller at the configured rate. The number of
1823 queued packets is limited by
1824 the <ref column="controller_burst_limit"/> value. The packet
1825 queue is shared fairly among the ports on a bridge.</p><p>Open
1826 vSwitch maintains two such packet rate-limiters per bridge.
1827 One of these applies to packets sent up to the controller
1828 because they do not correspond to any flow. The other applies
1829 to packets sent up to the controller by request through flow
1830 actions. When both rate-limiters are filled with packets, the
1831 actual rate that packets are sent to the controller is up to
1832 twice the specified rate.</p>
1835 <column name="controller_burst_limit">
1836 In conjunction with <ref column="controller_rate_limit"/>,
1837 the maximum number of unused packet credits that the bridge will
1838 allow to accumulate, in packets. If not specified, the default
1839 is implementation-specific.
1843 <group title="Additional In-Band Configuration">
1844 <p>These values are considered only in in-band control mode (see
1845 <ref column="connection_mode"/>).</p>
1847 <p>When multiple controllers are configured on a single bridge, there
1848 should be only one set of unique values in these columns. If different
1849 values are set for these columns in different controllers, the effect
1852 <column name="local_ip">
1853 The IP address to configure on the local port,
1854 e.g. <code>192.168.0.123</code>. If this value is unset, then
1855 <ref column="local_netmask"/> and <ref column="local_gateway"/> are
1859 <column name="local_netmask">
1860 The IP netmask to configure on the local port,
1861 e.g. <code>255.255.255.0</code>. If <ref column="local_ip"/> is set
1862 but this value is unset, then the default is chosen based on whether
1863 the IP address is class A, B, or C.
1866 <column name="local_gateway">
1867 The IP address of the gateway to configure on the local port, as a
1868 string, e.g. <code>192.168.0.1</code>. Leave this column unset if
1869 this network has no gateway.
1873 <group title="Other Features">
1874 <column name="external_ids">
1875 Key-value pairs for use by external frameworks that integrate with Open
1876 vSwitch, rather than by Open vSwitch itself. System integrators should
1877 either use the Open vSwitch development mailing list to coordinate on
1878 common key-value definitions, or choose key names that are likely to be
1879 unique. No common key-value pairs are currently defined.
1883 <group title="Controller Status">
1884 <column name="is_connected">
1885 <code>true</code> if currently connected to this controller,
1886 <code>false</code> otherwise.
1889 <column name="role">
1890 <p>The level of authority this controller has on the associated
1891 bridge. Possible values are:</p>
1893 <dt><code>other</code></dt>
1894 <dd>Allows the controller access to all OpenFlow features.</dd>
1895 <dt><code>master</code></dt>
1896 <dd>Equivalent to <code>other</code>, except that there may be at
1897 most one master controller at a time. When a controller configures
1898 itself as <code>master</code>, any existing master is demoted to
1899 the <code>slave</code>role.</dd>
1900 <dt><code>slave</code></dt>
1901 <dd>Allows the controller read-only access to OpenFlow features.
1902 Attempts to modify the flow table will be rejected with an
1903 error. Slave controllers do not receive OFPT_PACKET_IN or
1904 OFPT_FLOW_REMOVED messages, but they do receive OFPT_PORT_STATUS
1909 <column name="status">
1910 <p>Key-value pairs that report controller status.</p>
1912 <dt><code>last_error</code></dt>
1913 <dd>A human-readable description of the last error on the connection
1914 to the controller; i.e. <code>strerror(errno)</code>. This key
1915 will exist only if an error has occurred.</dd>
1916 <dt><code>state</code></dt>
1917 <dd>The state of the connection to the controller. Possible values
1918 are: <code>VOID</code> (connection is disabled),
1919 <code>BACKOFF</code> (attempting to reconnect at an increasing
1920 period), <code>CONNECTING</code> (attempting to connect),
1921 <code>ACTIVE</code> (connected, remote host responsive), and
1922 <code>IDLE</code> (remote host idle, sending keep-alive). These
1923 values may change in the future. They are provided only for human
1925 <dt><code>sec_since_connect</code></dt>
1926 <dd>The amount of time since this controller last successfully
1927 connected to the switch (in seconds). Value is empty if controller
1928 has never successfully connected.</dd>
1929 <dt><code>sec_since_disconnect</code></dt>
1930 <dd>The amount of time since this controller last disconnected from
1931 the switch (in seconds). Value is empty if controller has never
1938 <table name="Manager" title="OVSDB management connection.">
1940 Configuration for a database connection to an Open vSwitch database
1945 This table primarily configures the Open vSwitch database
1946 (<code>ovsdb-server</code>), not the Open vSwitch switch
1947 (<code>ovs-vswitchd</code>). The switch does read the table to determine
1948 what connections should be treated as in-band.
1952 The Open vSwitch database server can initiate and maintain active
1953 connections to remote clients. It can also listen for database
1957 <group title="Core Features">
1958 <column name="target">
1959 <p>Connection method for managers.</p>
1961 The following connection methods are currently supported:
1964 <dt><code>ssl:<var>ip</var></code>[<code>:<var>port</var></code>]</dt>
1967 The specified SSL <var>port</var> (default: 6632) on the host at
1968 the given <var>ip</var>, which must be expressed as an IP address
1969 (not a DNS name). The <ref table="Open_vSwitch" column="ssl"/>
1970 column in the <ref table="Open_vSwitch"/> table must point to a
1971 valid SSL configuration when this form is used.
1974 SSL support is an optional feature that is not always built as
1975 part of Open vSwitch.
1979 <dt><code>tcp:<var>ip</var></code>[<code>:<var>port</var></code>]</dt>
1981 The specified TCP <var>port</var> (default: 6632) on the host at
1982 the given <var>ip</var>, which must be expressed as an IP address
1985 <dt><code>pssl:</code>[<var>port</var>][<code>:<var>ip</var></code>]</dt>
1988 Listens for SSL connections on the specified TCP <var>port</var>
1989 (default: 6632). If <var>ip</var>, which must be expressed as an
1990 IP address (not a DNS name), is specified, then connections are
1991 restricted to the specified local IP address.
1994 The <ref table="Open_vSwitch" column="ssl"/> column in the <ref
1995 table="Open_vSwitch"/> table must point to a valid SSL
1996 configuration when this form is used.
1999 SSL support is an optional feature that is not always built as
2000 part of Open vSwitch.
2003 <dt><code>ptcp:</code>[<var>port</var>][<code>:<var>ip</var></code>]</dt>
2005 Listens for connections on the specified TCP <var>port</var>
2006 (default: 6632). If <var>ip</var>, which must be expressed as an
2007 IP address (not a DNS name), is specified, then connections are
2008 restricted to the specified local IP address.
2011 <p>When multiple managers are configured, the <ref column="target"/>
2012 values must be unique. Duplicate <ref column="target"/> values yield
2013 unspecified results.</p>
2016 <column name="connection_mode">
2018 If it is specified, this setting must be one of the following strings
2019 that describes how Open vSwitch contacts this OVSDB client over the
2024 <dt><code>in-band</code></dt>
2026 In this mode, this connection's traffic travels over a bridge
2027 managed by Open vSwitch. With this setting, Open vSwitch allows
2028 traffic to and from the client regardless of the contents of the
2029 OpenFlow flow table. (Otherwise, Open vSwitch would never be able
2030 to connect to the client, because it did not have a flow to enable
2031 it.) This is the most common connection mode because it is not
2032 necessary to maintain two independent networks.
2034 <dt><code>out-of-band</code></dt>
2036 In this mode, the client's traffic uses a control network separate
2037 from that managed by Open vSwitch, that is, Open vSwitch does not
2038 use any of its own network devices to communicate with the client.
2039 The control network must be configured separately, before or after
2040 <code>ovs-vswitchd</code> is started.
2045 If not specified, the default is implementation-specific.
2050 <group title="Client Failure Detection and Handling">
2051 <column name="max_backoff">
2052 Maximum number of milliseconds to wait between connection attempts.
2053 Default is implementation-specific.
2056 <column name="inactivity_probe">
2057 Maximum number of milliseconds of idle time on connection to the client
2058 before sending an inactivity probe message. If Open vSwitch does not
2059 communicate with the client for the specified number of seconds, it
2060 will send a probe. If a response is not received for the same
2061 additional amount of time, Open vSwitch assumes the connection has been
2062 broken and attempts to reconnect. Default is implementation-specific.
2063 A value of 0 disables inactivity probes.
2067 <group title="Other Features">
2068 <column name="external_ids">
2069 Key-value pairs for use by external frameworks that integrate with Open
2070 vSwitch, rather than by Open vSwitch itself. System integrators should
2071 either use the Open vSwitch development mailing list to coordinate on
2072 common key-value definitions, or choose key names that are likely to be
2073 unique. No common key-value pairs are currently defined.
2077 <group title="Status">
2078 <column name="is_connected">
2079 <code>true</code> if currently connected to this manager,
2080 <code>false</code> otherwise.
2083 <column name="status">
2084 <p>Key-value pairs that report manager status.</p>
2086 <dt><code>last_error</code></dt>
2087 <dd>A human-readable description of the last error on the connection
2088 to the manager; i.e. <code>strerror(errno)</code>. This key
2089 will exist only if an error has occurred.</dd>
2092 <dt><code>state</code></dt>
2093 <dd>The state of the connection to the manager. Possible values
2094 are: <code>VOID</code> (connection is disabled),
2095 <code>BACKOFF</code> (attempting to reconnect at an increasing
2096 period), <code>CONNECTING</code> (attempting to connect),
2097 <code>ACTIVE</code> (connected, remote host responsive), and
2098 <code>IDLE</code> (remote host idle, sending keep-alive). These
2099 values may change in the future. They are provided only for human
2103 <dt><code>sec_since_connect</code></dt>
2104 <dd>The amount of time since this manager last successfully connected
2105 to the database (in seconds). Value is empty if manager has never
2106 successfully connected.</dd>
2109 <dt><code>sec_since_disconnect</code></dt>
2110 <dd>The amount of time since this manager last disconnected from the
2111 database (in seconds). Value is empty if manager has never
2118 <table name="NetFlow">
2119 A NetFlow target. NetFlow is a protocol that exports a number of
2120 details about terminating IP flows, such as the principals involved
2123 <column name="targets">
2124 NetFlow targets in the form
2125 <code><var>ip</var>:<var>port</var></code>. The <var>ip</var>
2126 must be specified numerically, not as a DNS name.
2129 <column name="engine_id">
2130 Engine ID to use in NetFlow messages. Defaults to datapath index
2134 <column name="engine_type">
2135 Engine type to use in NetFlow messages. Defaults to datapath
2136 index if not specified.
2139 <column name="active_timeout">
2140 The interval at which NetFlow records are sent for flows that are
2141 still active, in seconds. A value of <code>0</code> requests the
2142 default timeout (currently 600 seconds); a value of <code>-1</code>
2143 disables active timeouts.
2146 <column name="add_id_to_interface">
2147 <p>If this column's value is <code>false</code>, the ingress and egress
2148 interface fields of NetFlow flow records are derived from OpenFlow port
2149 numbers. When it is <code>true</code>, the 7 most significant bits of
2150 these fields will be replaced by the least significant 7 bits of the
2151 engine id. This is useful because many NetFlow collectors do not
2152 expect multiple switches to be sending messages from the same host, so
2153 they do not store the engine information which could be used to
2154 disambiguate the traffic.</p>
2155 <p>When this option is enabled, a maximum of 508 ports are supported.</p>
2158 <column name="external_ids">
2159 Key-value pairs for use by external frameworks that integrate with Open
2160 vSwitch, rather than by Open vSwitch itself. System integrators should
2161 either use the Open vSwitch development mailing list to coordinate on
2162 common key-value definitions, or choose key names that are likely to be
2163 unique. No common key-value pairs are currently defined.
2168 SSL configuration for an Open_vSwitch.
2170 <column name="private_key">
2171 Name of a PEM file containing the private key used as the switch's
2172 identity for SSL connections to the controller.
2175 <column name="certificate">
2176 Name of a PEM file containing a certificate, signed by the
2177 certificate authority (CA) used by the controller and manager,
2178 that certifies the switch's private key, identifying a trustworthy
2182 <column name="ca_cert">
2183 Name of a PEM file containing the CA certificate used to verify
2184 that the switch is connected to a trustworthy controller.
2187 <column name="bootstrap_ca_cert">
2188 If set to <code>true</code>, then Open vSwitch will attempt to
2189 obtain the CA certificate from the controller on its first SSL
2190 connection and save it to the named PEM file. If it is successful,
2191 it will immediately drop the connection and reconnect, and from then
2192 on all SSL connections must be authenticated by a certificate signed
2193 by the CA certificate thus obtained. <em>This option exposes the
2194 SSL connection to a man-in-the-middle attack obtaining the initial
2195 CA certificate.</em> It may still be useful for bootstrapping.
2198 <column name="external_ids">
2199 Key-value pairs for use by external frameworks that integrate with Open
2200 vSwitch, rather than by Open vSwitch itself. System integrators should
2201 either use the Open vSwitch development mailing list to coordinate on
2202 common key-value definitions, or choose key names that are likely to be
2203 unique. No common key-value pairs are currently defined.
2207 <table name="sFlow">
2208 <p>An sFlow(R) target. sFlow is a protocol for remote monitoring
2211 <column name="agent">
2212 Name of the network device whose IP address should be reported as the
2213 ``agent address'' to collectors. If not specified, the IP address
2214 defaults to the <ref table="Controller" column="local_ip"/> in the
2215 collector's <ref table="Controller"/>. If an agent IP address cannot be
2216 determined either way, sFlow is disabled.
2219 <column name="header">
2220 Number of bytes of a sampled packet to send to the collector.
2221 If not specified, the default is 128 bytes.
2224 <column name="polling">
2225 Polling rate in seconds to send port statistics to the collector.
2226 If not specified, defaults to 30 seconds.
2229 <column name="sampling">
2230 Rate at which packets should be sampled and sent to the collector.
2231 If not specified, defaults to 400, which means one out of 400
2232 packets, on average, will be sent to the collector.
2235 <column name="targets">
2236 sFlow targets in the form
2237 <code><var>ip</var>:<var>port</var></code>.
2240 <column name="external_ids">
2241 Key-value pairs for use by external frameworks that integrate with Open
2242 vSwitch, rather than by Open vSwitch itself. System integrators should
2243 either use the Open vSwitch development mailing list to coordinate on
2244 common key-value definitions, or choose key names that are likely to be
2245 unique. No common key-value pairs are currently defined.
2249 <table name="Capability">
2250 <p>Records in this table describe functionality supported by the hardware
2251 and software platform on which this Open vSwitch is based. Clients
2252 should not modify this table.</p>
2254 <p>A record in this table is meaningful only if it is referenced by the
2255 <ref table="Open_vSwitch" column="capabilities"/> column in the
2256 <ref table="Open_vSwitch"/> table. The key used to reference it, called
2257 the record's ``category,'' determines the meanings of the
2258 <ref column="details"/> column. The following general forms of
2259 categories are currently defined:</p>
2262 <dt><code>qos-<var>type</var></code></dt>
2263 <dd><var>type</var> is supported as the value for
2264 <ref column="type" table="QoS"/> in the <ref table="QoS"/> table.
2268 <column name="details">
2269 <p>Key-value pairs that describe capabilities. The meaning of the pairs
2270 depends on the category key that the <ref table="Open_vSwitch"
2271 column="capabilities"/> column in the <ref table="Open_vSwitch"/> table
2272 uses to reference this record, as described above.</p>
2274 <p>The presence of a record for category <code>qos-<var>type</var></code>
2275 indicates that the switch supports <var>type</var> as the value of
2276 the <ref table="QoS" column="type"/> column in the <ref table="QoS"/>
2277 table. The following key-value pairs are defined to further describe
2278 QoS capabilities:</p>
2281 <dt><code>n-queues</code></dt>
2282 <dd>Number of supported queues, as a positive integer. Keys in the
2283 <ref table="QoS" column="queues"/> column for <ref table="QoS"/>
2284 records whose <ref table="QoS" column="type"/> value
2285 equals <var>type</var> must range between 0 and this value minus one,
projects / openvswitch / blob