1 {"name": "ovs_vswitchd_db",
2 "comment": "Configuration for one Open vSwitch daemon.",
5 "comment": "Configuration for an Open vSwitch daemon.",
8 "comment": "Set of bridges managed by the daemon.",
9 "type": {"key": "uuid", "min": 0, "max": "unlimited"}},
11 "comment": "Exactly 12 hex digits that identify the daemon.",
14 "comment": "Default Controller used by bridges.",
15 "type": {"key": "uuid", "min": 0, "max": 1}},
17 "comment": "SSL used globally by the daemon.",
18 "type": {"key": "uuid", "min": 0, "max": 1}}}},
20 "comment": "Configuration for a bridge within an OpenVSwitch.",
23 "comment": "Bridge identifier. Should be alphanumeric and no more than about 8 bytes long. Must be unique among the names of ports, interfaces, and bridges on a host.",
26 "comment": "OpenFlow datapath ID. Exactly 12 hex digits.",
27 "type": {"key": "string", "min": 0, "max": 1}},
29 "comment": "Ethernet address to use for bridge. Exactly 12 hex digits in the form XX:XX:XX:XX:XX:XX.",
30 "type": {"key": "string", "min": 0, "max": 1}},
32 "comment": "Ports included in the bridge.",
33 "type": {"key": "uuid", "min": 0, "max": "unlimited"}},
35 "comment": "Port mirroring configuration.",
36 "type": {"key": "uuid", "min": 0, "max": "unlimited"}},
38 "comment": "NetFlow configuration.",
39 "type": {"key": "uuid", "min": 0, "max": "unlimited"}},
41 "comment": "OpenFlow controller. If unset, defaults to that specified by the parent OpenVSwitch.",
42 "type": {"key": "uuid", "min": 0, "max": 1}}}},
44 "comment": "A port within a Bridge. May contain a single Interface or multiple (bonded) Interfaces.",
47 "comment": "Port name. Should be alphanumeric and no more than about 8 bytes long. May be the same as the interface name, for non-bonded ports. Must otherwise be unique among the names of ports, interfaces, and bridges on a host.",
50 "comment": "The Port's Interfaces. If there is more than one, this is a bonded Port.",
51 "type": {"key": "uuid", "min": 1, "max": "unlimited"}},
53 "comment": "The 802.1Q VLAN(s) that this port trunks. Should be empty if this port trunks all VLAN(s) or if this is not a trunk port.",
54 "type": {"key": "integer", "min": 0, "max": 4096}},
56 "comment": "This port's implicitly tagged VLAN. Should be empty if this is a trunk port.",
57 "type": {"key": "integer", "min": 0, "max": 1}},
59 "comment": "For a bonded port, the number of milliseconds for which carrier must stay up on an interface before the interface is considered to be up. Ignored for non-bonded ports.",
62 "comment": "For a bonded port, the number of milliseconds for which carrier must stay down on an interface before the interface is considered to be down. Ignored for non-bonded ports.",
65 "comment": "An interface within a Port.",
68 "comment": "Interface name. Should be alphanumeric and no more than about 8 bytes long. May be the same as the port name, for non-bonded ports. Must otherwise be unique among the names of ports, interfaces, and bridges on a host.",
71 "comment": "An \"internal\" port is one that is implemented in software as a logical device.",
73 "ingress_policing_rate": {
74 "comment": "Maximum rate for data received on this interface, in kbps. Set to 0 to disable policing.",
76 "ingress_policing_burst": {
77 "comment": "Maximum burst size for data received on this interface, in kb. The default burst size if set to 0 is 10 kb.",
80 "comment": "A port mirror within a Bridge.",
83 "comment": "Arbitrary identifier for the Mirror.",
86 "comment": "Ports on which arriving packets are selected for mirroring.",
87 "type": {"key": "uuid", "min": 0, "max": "unlimited"}},
89 "comment": "Ports on which departing packets are selected for mirroring.",
90 "type": {"key": "uuid", "min": 0, "max": "unlimited"}},
92 "comment": "VLANs on which packets are selected for mirroring.",
93 "type": {"key": "integer", "min": 0, "max": 4096}},
95 "comment": "Output port for selected packets. Mutually exclusive with output_vlan.",
96 "type": {"key": "uuid", "min": 0, "max": 1}},
98 "comment": "Output VLAN for selected packets. Mutually exclusive with output_vlan.",
99 "type": {"key": "integer", "min": 0, "max": 1}}}},
101 "comment": "A Netflow target.",
104 "comment": "Netflow target in the form \"IP:PORT\".",
107 "comment": "Engine type to use in NetFlow messages. Defaults to datapath ID if not specified.",
110 "comment": "Engine ID to use in NetFlow messages. Defaults to datapath ID if not specified.",
112 "add_id_to_interface": {
113 "comment": "Place least-significant 7 bits of engine ID into most significant bits of ingress and egress interface fields of NetFlow records?",
114 "type": "boolean"}}},
116 "comment": "An OpenFlow controller.",
119 "comment": "Connection method for controller, e.g. \"ssl:...\", \"tcp:...\". The special string \"discover\" enables controller discovery.",
122 "comment": "Maximum number of milliseconds to wait between connection attempts. Default is implementation-specific.",
123 "type": {"key": "integer", "min": 0, "max": 1}},
124 "inactivity_probe": {
125 "comment": "Maximum number of milliseconds of idle time on connection to controller before sending an inactivity probe message. Default is implementation-specific.",
126 "type": {"key": "integer", "min": 0, "max": 1}},
128 "comment": "Either \"standalone\" or \"secure\", or empty to use the implementation's default.",
129 "type": {"key": "string", "min": 0, "max": 1}},
130 "discovery_accept_regex": {
131 "comment": "If \"target\" is \"discovery\", a POSIX extended regular expression against which the discovered controller location is validated. If not specified, the default is implementation-specific.",
132 "type": {"key": "string", "min": 0, "max": 1}},
133 "discovery_update_resolv_conf": {
134 "comment": "If \"target\" is \"discovery\", whether to update /etc/resolv.conf when the controller is discovered. If not specified, the default is implementation-specific.",
135 "type": {"key": "boolean", "min": 0, "max": 1}},
137 "comment": "Either \"in-band\" or \"out-of-band\". If not specified, the default is implementation-specific.",
138 "type": {"key": "string", "min": 0, "max": 1}},
140 "comment": "If \"target\" is not \"discovery\", the IP address to configure on the local port.",
141 "type": {"key": "string", "min": 0, "max": 1}},
143 "comment": "If \"target\" is not \"discovery\", the IP netmask to configure on the local port.",
144 "type": {"key": "string", "min": 0, "max": 1}},
146 "comment": "If \"target\" is not \"discovery\", the IP gateway to configure on the local port.",
147 "type": {"key": "string", "min": 0, "max": 1}},
148 "controller_rate_limit": {
149 "comment": "The maximum rate at which packets will be forwarded to the OpenFlow controller, in packets per second. If not specified, the default is implementation-specific.",
150 "type": {"key": "integer", "min": 0, "max": 1}},
151 "controller_burst_limit": {
152 "comment": "The maximum number of unused packet credits that the bridge will allow to accumulate, in packets. If not specified, the default is implementation-specific.",
153 "type": {"key": "integer", "min": 0, "max": 1}}}},
155 "comment": "SSL configuration for an OpenVSwitch.",
158 "comment": "Name of a PEM file containing the private key used as the switch's identity for SSL connections to the controller.",
161 "comment": "Name of a PEM file containing a certificate, signed by the certificate authority (CA) used by the controller and manager, that certifies the switch's private key, identifying a trustworthy switch.",
164 "comment": "Name of a PEM file containing the CA certificate used to verify that the switch is connected to a trustworthy controller.",
165 "type": "string"}}}}}