1 # Spec file for vswitch and related programs.
3 # Copyright (C) 2009, 2010 Nicira Networks, Inc.
5 # Copying and distribution of this file, with or without modification,
6 # are permitted in any medium without royalty provided the copyright
7 # notice and this notice are preserved. This file is offered as-is,
8 # without warranty of any kind.
10 # When building, the rpmbuild command line should define
11 # vswitch_version, xen_version, and build_number using -D arguments.
14 # rpmbuild -D "vswitch_version 0.8.9~1+build123" -D "xen_version 2.6.18-128.1.1.el5.xs5.1.0.483.1000xen" -D "build_number --with-build-number=123" -bb /usr/src/redhat/SPECS/vswitch-xen.spec
16 %define version %{vswitch_version}-%{xen_version}
19 Summary: Virtual switch
20 Group: System Environment/Daemons
21 URL: http://www.openvswitch.org/
22 Version: %{vswitch_version}
24 # The entire source code is ASL 2.0 except datapath/ which is GPLv2
25 License: ASL 2.0 and GPLv2
27 Source: openvswitch-%{vswitch_version}.tar.gz
28 Buildroot: /tmp/vswitch-xen-rpm
29 Requires: kernel-xen = %(echo '%{xen_version}' | sed 's/xen$//')
30 # The following Conflicts prevents the "vswitch" package generated by
31 # this spec file from installing at the same time as the "openvswitch"
32 # package shipped with XenServer 5.5.900. In fact, the packages
33 # contain some files with identical names anyhow, so they will not
34 # coexist, but adding an explicit Conflicts makes this conflict more
36 Conflicts: openvswitch
39 The vswitch provides standard network bridging functions augmented with
40 support for the OpenFlow protocol for remote per-flow control of
44 %setup -q -n openvswitch-%{vswitch_version}
47 ./configure --prefix=/usr --sysconfdir=/etc --localstatedir=%{_localstatedir} --with-l26=/lib/modules/%{xen_version}/build --enable-ssl %{build_number}
51 rm -rf $RPM_BUILD_ROOT
52 make install DESTDIR=$RPM_BUILD_ROOT
53 install -d -m 755 $RPM_BUILD_ROOT/etc
54 install -d -m 755 $RPM_BUILD_ROOT/etc/init.d
55 install -m 755 xenserver/etc_init.d_vswitch \
56 $RPM_BUILD_ROOT/etc/init.d/vswitch
57 install -m 755 xenserver/etc_init.d_vswitch-xapi-update \
58 $RPM_BUILD_ROOT/etc/init.d/vswitch-xapi-update
59 install -d -m 755 $RPM_BUILD_ROOT/etc/sysconfig
60 install -d -m 755 $RPM_BUILD_ROOT/etc/logrotate.d
61 install -m 755 xenserver/etc_logrotate.d_vswitch \
62 $RPM_BUILD_ROOT/etc/logrotate.d/vswitch
63 install -d -m 755 $RPM_BUILD_ROOT/etc/profile.d
64 install -m 755 xenserver/etc_profile.d_vswitch.sh \
65 $RPM_BUILD_ROOT/etc/profile.d/vswitch.sh
66 install -d -m 755 $RPM_BUILD_ROOT/etc/xapi.d/plugins
67 install -m 755 xenserver/etc_xapi.d_plugins_vswitch-cfg-update \
68 $RPM_BUILD_ROOT/etc/xapi.d/plugins/vswitch-cfg-update
69 install -d -m 755 $RPM_BUILD_ROOT/usr/share/vswitch/scripts
70 install -m 644 vswitchd/vswitch.ovsschema \
71 $RPM_BUILD_ROOT/usr/share/vswitch/vswitch.ovsschema
72 install -m 755 xenserver/opt_xensource_libexec_interface-reconfigure \
73 $RPM_BUILD_ROOT/usr/share/vswitch/scripts/interface-reconfigure
74 install -m 755 xenserver/etc_xensource_scripts_vif \
75 $RPM_BUILD_ROOT/usr/share/vswitch/scripts/vif
76 install -m 755 xenserver/usr_share_vswitch_scripts_dump-vif-details \
77 $RPM_BUILD_ROOT/usr/share/vswitch/scripts/dump-vif-details
78 install -m 755 xenserver/usr_share_vswitch_scripts_refresh-xs-network-uuids \
79 $RPM_BUILD_ROOT/usr/share/vswitch/scripts/refresh-xs-network-uuids
80 install -m 755 xenserver/usr_sbin_xen-bugtool \
81 $RPM_BUILD_ROOT/usr/share/vswitch/scripts/xen-bugtool
82 install -m 755 xenserver/usr_sbin_brctl \
83 $RPM_BUILD_ROOT/usr/share/vswitch/scripts/brctl
84 install -m 755 xenserver/usr_share_vswitch_scripts_sysconfig.template \
85 $RPM_BUILD_ROOT/usr/share/vswitch/scripts/sysconfig.template
87 xenserver/usr_lib_xsconsole_plugins-base_XSFeatureVSwitch.py \
88 $RPM_BUILD_ROOT/usr/share/vswitch/scripts/XSFeatureVSwitch.py
90 install -d -m 755 $RPM_BUILD_ROOT/lib/modules/%{xen_version}/kernel/net/vswitch
91 find datapath/linux-2.6 -name *.ko -exec install -m 755 \{\} $RPM_BUILD_ROOT/lib/modules/%{xen_version}/kernel/net/vswitch \;
93 # Get rid of stuff we don't want to make RPM happy.
95 $RPM_BUILD_ROOT/usr/bin/ovs-controller \
96 $RPM_BUILD_ROOT/usr/bin/ovs-discover \
97 $RPM_BUILD_ROOT/usr/bin/ovs-kill \
98 $RPM_BUILD_ROOT/usr/bin/ovs-openflowd \
99 $RPM_BUILD_ROOT/usr/bin/ovs-pki \
100 $RPM_BUILD_ROOT/usr/bin/ovs-wdt \
101 $RPM_BUILD_ROOT/usr/sbin/ovs-monitor \
102 $RPM_BUILD_ROOT/usr/share/man/man8/ovs-controller.8 \
103 $RPM_BUILD_ROOT/usr/share/man/man8/ovs-discover.8 \
104 $RPM_BUILD_ROOT/usr/share/man/man8/ovs-kill.8 \
105 $RPM_BUILD_ROOT/usr/share/man/man8/ovs-openflowd.8 \
106 $RPM_BUILD_ROOT/usr/share/man/man8/ovs-pki.8
107 rm -f $RPM_BUILD_ROOT/lib/modules/%{xen_version}/kernel/net/vswitch/veth_mod.ko
109 install -d -m 755 $RPM_BUILD_ROOT/var/lib/openvswitch
112 rm -rf $RPM_BUILD_ROOT
115 if [ ! -f /etc/xensource-inventory ]; then
116 printf "XenSource inventory not present in /etc/xensource-inventory"
120 if [ "$1" = "1" ]; then
121 if md5sum -c --status <<EOF
122 ca141d60061dcfdade73e75abc6529b5 /usr/sbin/brctl
123 b8e9835862ef1a9cec2a3f477d26c989 /etc/xensource/scripts/vif
124 51970ad613a3996d5997e18e44db47da /opt/xensource/libexec/interface-reconfigure
125 5654c8c36699fcc8744ca9cd5b855414 /usr/sbin/xen-bugtool
128 printf "\nVerified host scripts from XenServer 5.5.0.\n\n"
129 elif md5sum -c --status <<EOF
130 ca141d60061dcfdade73e75abc6529b5 /usr/sbin/brctl
131 b8e9835862ef1a9cec2a3f477d26c989 /etc/xensource/scripts/vif
132 51970ad613a3996d5997e18e44db47da /opt/xensource/libexec/interface-reconfigure
133 f6519085c2fc5f7bc4eccc294ed62000 /usr/sbin/xen-bugtool
136 printf "\nVerified host scripts from XenServer 5.5.0-24648p (Update 1)\n"
137 printf "or 5.5.0-25727p (Update 2).\n\n"
138 elif md5sum -c --status <<EOF
139 ca141d60061dcfdade73e75abc6529b5 /usr/sbin/brctl
140 b8e9835862ef1a9cec2a3f477d26c989 /etc/xensource/scripts/vif
141 ce451d3c985fd1db6497a363f0d9dedb /opt/xensource/libexec/interface-reconfigure
142 2b53f500431fcba5276c896e9e4281b9 /usr/sbin/xen-bugtool
145 printf "\nVerified host scripts from XenServer 5.5.900.\n\n"
149 The original XenServer scripts replaced by this package are not those
150 of any supported version of XenServer. This could lead to unexpected
151 behavior of your server. Unless you are sure you know what you are
152 doing, it is highly recommended that you remove this package
153 immediately after the install completes, which will restore the
154 XenServer scripts that you were previously using.
160 if test ! -e /var/lib/openvswitch/dbcache; then
161 if test "$1" = 1; then
162 printf "Creating xapi database cache... "
164 printf "warning: Open vSwitch is being re-installed or upgraded,\n"
165 printf " but the xapi database cache is missing.\n"
166 printf "Re-creating xapi database cache... "
169 if /usr/share/vswitch/scripts/interface-reconfigure rewrite; then
173 printf "Open vSwitch can only be installed on a XenServer that\n"
174 printf "has connectivity to xapi on the pool master. Please\n"
175 printf "fix connectivity to the pool master, then try again.\n"
180 # Ensure that modprobe will find our modules.
181 depmod %{xen_version}
183 if grep -F net.ipv4.conf.all.arp_filter /etc/sysctl.conf >/dev/null 2>&1; then :; else
184 cat >>/etc/sysctl.conf <<EOF
185 # This works around an issue in xhad, which binds to a particular
186 # Ethernet device, which in turn causes ICMP port unreachable messages
187 # if packets are received are on the wrong interface, which in turn
188 # can happen if we send out ARP replies on every interface (as Linux
189 # does by default) instead of just on the interface that has the IP
190 # address being ARPed for, which this sysctl setting in turn works
194 net.ipv4.conf.all.arp_filter = 1
198 if test ! -e /etc/ovs-vswitchd.conf.db; then
199 # Create ovs-vswitchd config database
200 ovsdb-tool -vANY:console:emer create /etc/ovs-vswitchd.conf.db \
201 /usr/share/vswitch/vswitch.ovsschema \
203 # Create initial table in config database
204 ovsdb-tool -vANY:console:emer transact /etc/ovs-vswitchd.conf.db \
205 '[{"op": "insert", "table": "Open_vSwitch", "row": {}}]' \
209 # Create default or update existing /etc/sysconfig/vswitch.
210 SYSCONFIG=/etc/sysconfig/vswitch
211 TEMPLATE=/usr/share/vswitch/scripts/sysconfig.template
212 if [ ! -e $SYSCONFIG ]; then
213 cp $TEMPLATE $SYSCONFIG
215 for var in $(awk -F'[ :]' '/^# [_A-Z0-9]+:/{print $2}' $TEMPLATE)
217 if ! grep $var $SYSCONFIG >/dev/null 2>&1; then
219 sed -n "/$var:/,/$var=/p" $TEMPLATE >> $SYSCONFIG
224 # Replace XenServer files by our versions.
225 mkdir -p /usr/lib/vswitch/xs-original \
226 || printf "Could not create script backup directory.\n"
228 /opt/xensource/libexec/interface-reconfigure \
229 /etc/xensource/scripts/vif \
230 /usr/sbin/xen-bugtool \
235 if [ "$t" != "/usr/share/vswitch/scripts/$s" ]; then
236 mv "$f" /usr/lib/vswitch/xs-original/ \
237 || printf "Could not save original XenServer $s script\n"
238 ln -s "/usr/share/vswitch/scripts/$s" "$f" \
239 || printf "Could not link to vSwitch $s script\n"
243 # Install xsconsole plugin
244 plugin=$(readlink /usr/lib/xsconsole/plugins-base/XSFeatureVSwitch.py)
245 if [ "$plugin" != "/usr/share/vswitch/scripts/XSFeatureVSwitch.py" ]; then
246 rm -f /usr/lib/xsconsole/plugins-base/XSFeatureVSwitch.py
247 ln -s /usr/share/vswitch/scripts/XSFeatureVSwitch.py /usr/lib/xsconsole/plugins-base/ || printf "Could not link to vSswitch xsconsole plugin.\n"
250 # Ensure all required services are set to run
251 for s in vswitch vswitch-xapi-update; do
252 if chkconfig --list $s >/dev/null 2>&1; then
253 chkconfig --del $s || printf "Could not remove $s init script."
255 chkconfig --add $s || printf "Could not add $s init script."
256 chkconfig $s on || printf "Could not enable $s init script."
259 if [ "$1" = "1" ]; then # $1 = 2 for upgrade
260 printf "\nYou MUST reboot the server NOW to complete the change to the\n"
261 printf "the vSwitch. Attempts to modify networking on the server\n"
262 printf "or any hosted VM will fail until after the reboot and could\n"
263 printf "leave the server in an state requiring manual recovery.\n\n"
265 printf "\nTo use the new vSwitch, you should reboot the server\n"
266 printf "now. Failure to do so may result in incorrect operation.\n\n"
270 if [ "$1" = "0" ]; then # $1 = 1 for upgrade
271 for s in vswitch vswitch-xapi-update; do
272 chkconfig --del $s || printf "Could not remove $s init script."
278 if [ "$1" = "0" ]; then # $1 = 1 for upgrade
280 rm -f /usr/lib/xsconsole/plugins-base/XSFeatureVSwitch.py \
281 /usr/lib/xsconsole/plugins-base/XSFeatureVSwitch.pyc \
282 /usr/lib/xsconsole/plugins-base/XSFeatureVSwitch.pyo \
283 || printf "Could not remove vSwitch xsconsole plugin.\n"
285 # Restore original XenServer scripts
287 /opt/xensource/libexec/interface-reconfigure \
288 /etc/xensource/scripts/vif \
289 /usr/sbin/xen-bugtool \
293 if [ ! -f "/usr/lib/vswitch/xs-original/$s" ]; then
294 printf "Original XenServer $s script not present in /usr/lib/vswitch/xs-original\n"
295 printf "Could not restore original XenServer script.\n"
298 && mv "/usr/lib/vswitch/xs-original/$s" "$f") \
299 || printf "Could not restore original XenServer $s script.\n"
303 # Remove all configuration files
304 rm -f /etc/ovs-vswitchd.conf.db
305 rm -f /etc/sysconfig/vswitch
306 rm -f /etc/ovs-vswitchd.cacert
307 rm -f /var/lib/openvswitch/dbcache
309 printf "\nYou MUST reboot the server now to complete the change to\n"
310 printf "standard Xen networking. Attempts to modify networking on the\n"
311 printf "server or any hosted VM will fail until after the reboot and\n"
312 printf "could leave the server in a state requiring manual recovery.\n\n"
317 %defattr(-,root,root)
319 /etc/init.d/vswitch-xapi-update
320 /etc/xapi.d/plugins/vswitch-cfg-update
321 /etc/logrotate.d/vswitch
322 /etc/profile.d/vswitch.sh
323 /lib/modules/%{xen_version}/kernel/net/vswitch/openvswitch_mod.ko
324 /lib/modules/%{xen_version}/kernel/net/vswitch/brcompat_mod.ko
325 %if %(echo '%{xen_version}'|awk -F"." '{if ($3>=18) print 1; else print 0;}')
326 /lib/modules/%{xen_version}/kernel/net/vswitch/ip_gre_mod.ko
328 /usr/share/vswitch/scripts/dump-vif-details
329 /usr/share/vswitch/scripts/refresh-xs-network-uuids
330 /usr/share/vswitch/scripts/interface-reconfigure
331 /usr/share/vswitch/scripts/vif
332 /usr/share/vswitch/scripts/xen-bugtool
333 /usr/share/vswitch/scripts/XSFeatureVSwitch.py
334 /usr/share/vswitch/scripts/brctl
335 /usr/share/vswitch/scripts/sysconfig.template
336 # Following two files are generated automatically by rpm. We don't
337 # really need them and they won't be used on the XenServer, but there
338 # isn't an obvious place to get rid of them since they are generated
339 # after the install script runs. Since they are small, we just
341 /usr/share/vswitch/scripts/XSFeatureVSwitch.pyc
342 /usr/share/vswitch/scripts/XSFeatureVSwitch.pyo
343 /usr/share/vswitch/vswitch.ovsschema
344 /usr/sbin/ovs-brcompatd
345 /usr/sbin/ovs-vswitchd
346 /usr/sbin/ovsdb-server
351 /usr/bin/ovsdb-client
353 /usr/share/man/man1/ovsdb-client.1.gz
354 /usr/share/man/man1/ovsdb-server.1.gz
355 /usr/share/man/man1/ovsdb-tool.1.gz
356 /usr/share/man/man8/ovs-appctl.8.gz
357 /usr/share/man/man8/ovs-brcompatd.8.gz
358 /usr/share/man/man8/ovs-dpctl.8.gz
359 /usr/share/man/man8/ovs-ofctl.8.gz
360 /usr/share/man/man8/ovs-vsctl.8.gz
361 /usr/share/man/man8/ovs-vswitchd.8.gz