1 # Spec file for vswitch and related programs.
3 # Copyright (C) 2009 Nicira Networks, Inc.
5 # Copying and distribution of this file, with or without modification,
6 # are permitted in any medium without royalty provided the copyright
7 # notice and this notice are preserved. This file is offered as-is,
8 # without warranty of any kind.
10 # When building, the rpmbuild command line should define
11 # vswitch_version, xen_version, and build_number using -D arguments.
14 # rpmbuild -D "vswitch_version 0.8.9~1+build123" -D "xen_version 2.6.18-128.1.1.el5.xs5.1.0.483.1000xen" -D "build_number --with-build-number=123" -bb /usr/src/redhat/SPECS/vswitch-xen.spec
16 %define version %{vswitch_version}-%{xen_version}
17 %define _prefix /root/vswitch
20 Summary: Virtual switch
21 Group: System Environment/Daemons
22 URL: http://www.openvswitch.org/
23 Version: %{vswitch_version}
25 # The entire source code is ASL 2.0 except datapath/ which is GPLv2
26 License: ASL 2.0 and GPLv2
28 Source: openvswitch-%{vswitch_version}.tar.gz
29 Buildroot: /tmp/vswitch-xen-rpm
30 Requires: kernel-xen = %(echo '%{xen_version}' | sed 's/xen$//')
33 The vswitch provides standard network bridging functions augmented with
34 support for the OpenFlow protocol for remote per-flow control of
38 %setup -q -n openvswitch-%{vswitch_version}
41 ./configure --prefix=%{_prefix} --localstatedir=%{_localstatedir} --with-l26=/lib/modules/%{xen_version}/build --enable-ssl %{build_number}
45 rm -rf $RPM_BUILD_ROOT
46 make install DESTDIR=$RPM_BUILD_ROOT prefix=%{_prefix}
47 install -d -m 755 $RPM_BUILD_ROOT/etc
48 install -d -m 755 $RPM_BUILD_ROOT/etc/init.d
49 install -m 755 xenserver/etc_init.d_vswitch \
50 $RPM_BUILD_ROOT/etc/init.d/vswitch
51 install -m 755 xenserver/etc_init.d_vswitch-xapi-update \
52 $RPM_BUILD_ROOT/etc/init.d/vswitch-xapi-update
53 install -d -m 755 $RPM_BUILD_ROOT/etc/sysconfig
54 install -d -m 755 $RPM_BUILD_ROOT/etc/logrotate.d
55 install -m 755 xenserver/etc_logrotate.d_vswitch \
56 $RPM_BUILD_ROOT/etc/logrotate.d/vswitch
57 install -d -m 755 $RPM_BUILD_ROOT/etc/profile.d
58 install -m 755 xenserver/etc_profile.d_vswitch.sh \
59 $RPM_BUILD_ROOT/etc/profile.d/vswitch.sh
60 install -d -m 755 $RPM_BUILD_ROOT/etc/xapi.d/plugins
61 install -m 755 xenserver/etc_xapi.d_plugins_vswitch-cfg-update \
62 $RPM_BUILD_ROOT/etc/xapi.d/plugins/vswitch-cfg-update
63 install -d -m 755 $RPM_BUILD_ROOT%{_prefix}/scripts
64 install -m 755 xenserver/opt_xensource_libexec_interface-reconfigure \
65 $RPM_BUILD_ROOT%{_prefix}/scripts/interface-reconfigure
66 install -m 755 xenserver/etc_xensource_scripts_vif \
67 $RPM_BUILD_ROOT%{_prefix}/scripts/vif
68 install -m 755 xenserver/root_vswitch_scripts_dump-vif-details \
69 $RPM_BUILD_ROOT%{_prefix}/scripts/dump-vif-details
70 install -m 755 xenserver/root_vswitch_scripts_refresh-xs-network-uuids \
71 $RPM_BUILD_ROOT%{_prefix}/scripts/refresh-xs-network-uuids
72 install -m 755 xenserver/usr_sbin_xen-bugtool \
73 $RPM_BUILD_ROOT%{_prefix}/scripts/xen-bugtool
74 install -m 755 xenserver/usr_sbin_brctl \
75 $RPM_BUILD_ROOT%{_prefix}/scripts/brctl
76 install -m 755 xenserver/root_vswitch_scripts_sysconfig.template \
77 $RPM_BUILD_ROOT/root/vswitch/scripts/sysconfig.template
79 xenserver/usr_lib_xsconsole_plugins-base_XSFeatureVSwitch.py \
80 $RPM_BUILD_ROOT%{_prefix}/scripts/XSFeatureVSwitch.py
82 install -d -m 755 $RPM_BUILD_ROOT%{_prefix}/kernel_modules
83 find datapath/linux-2.6 -name *.ko -exec install -m 755 \{\} $RPM_BUILD_ROOT%{_prefix}/kernel_modules/ \;
85 # Get rid of stuff we don't want to make RPM happy.
87 $RPM_BUILD_ROOT/root/vswitch/bin/ezio-term \
88 $RPM_BUILD_ROOT/root/vswitch/bin/ovs-controller \
89 $RPM_BUILD_ROOT/root/vswitch/bin/ovs-discover \
90 $RPM_BUILD_ROOT/root/vswitch/bin/ovs-kill \
91 $RPM_BUILD_ROOT/root/vswitch/bin/ovs-pki \
92 $RPM_BUILD_ROOT/root/vswitch/bin/ovs-switchui \
93 $RPM_BUILD_ROOT/root/vswitch/bin/ovs-wdt \
94 $RPM_BUILD_ROOT/root/vswitch/bin/secchan \
95 $RPM_BUILD_ROOT/root/vswitch/sbin/ovs-monitor \
96 $RPM_BUILD_ROOT/root/vswitch/share/man/man8/ovs-controller.8 \
97 $RPM_BUILD_ROOT/root/vswitch/share/man/man8/ovs-discover.8 \
98 $RPM_BUILD_ROOT/root/vswitch/share/man/man8/ovs-kill.8 \
99 $RPM_BUILD_ROOT/root/vswitch/share/man/man8/ovs-pki.8 \
100 $RPM_BUILD_ROOT/root/vswitch/share/man/man8/secchan.8 \
101 $RPM_BUILD_ROOT/root/vswitch/share/openvswitch
104 rm -rf $RPM_BUILD_ROOT
107 if [ ! -f /etc/xensource-inventory ]; then
108 printf "XenSource inventory not present in /etc/xensource-inventory"
112 if [ "$1" = "1" ]; then
113 if ! md5sum -c --status <<EOF
114 b8e9835862ef1a9cec2a3f477d26c989 /etc/xensource/scripts/vif
115 51970ad613a3996d5997e18e44db47da /opt/xensource/libexec/interface-reconfigure
116 5654c8c36699fcc8744ca9cd5b855414 /usr/sbin/xen-bugtool
119 printf "\nThe original XenServer scripts replaced by this package\n"
120 printf "are different than expected. This could lead to unexpected\n"
121 printf "behavior of your server. Unless you are sure you know what\n"
122 printf "you are doing, it is highly recommended that you remove this\n"
123 printf "package immediately after the install completes, which\n"
124 printf "will restore the XenServer scripts that you were previously\n"
127 if test "`/usr/sbin/brctl --version`" != "bridge-utils, 1.1"; then
130 /usr/sbin/brctl replaced by this package reports the following version:
132 `/usr/sbin/brctl --version`
134 The expected version was:
138 Unless you are sure you know what you are doing, it is highly recommended that
139 you remove this package immediately after the install completes, which will
140 restore the original /usr/sbin/brctl.
146 if test ! -e /var/lib/openvswitch/dbcache; then
147 if test "$1" = 1; then
148 printf "Creating xapi database cache... "
150 printf "warning: Open vSwitch is being re-installed or upgraded,\n"
151 printf " but the xapi database cache is missing.\n"
152 printf "Re-creating xapi database cache... "
155 mkdir -p /var/lib/openvswitch
156 if /root/vswitch/scripts/interface-reconfigure rewrite; then
160 printf "Open vSwitch can only be installed on a XenServer that\n"
161 printf "has connectivity to xapi on the pool master. Please\n"
162 printf "fix connectivity to the pool master, then try again.\n"
167 if grep -F net.ipv4.conf.all.arp_filter /etc/sysctl.conf >/dev/null 2>&1; then :; else
168 cat >>/etc/sysctl.conf <<EOF
169 # This works around an issue in xhad, which binds to a particular
170 # Ethernet device, which in turn causes ICMP port unreachable messages
171 # if packets are received are on the wrong interface, which in turn
172 # can happen if we send out ARP replies on every interface (as Linux
173 # does by default) instead of just on the interface that has the IP
174 # address being ARPed for, which this sysctl setting in turn works
178 net.ipv4.conf.all.arp_filter = 1
182 # Ensure ovs-vswitchd.conf exists
183 touch /etc/ovs-vswitchd.conf
185 # Create default or update existing /etc/sysconfig/vswitch.
186 SYSCONFIG=/etc/sysconfig/vswitch
187 TEMPLATE=/root/vswitch/scripts/sysconfig.template
188 if [ ! -e $SYSCONFIG ]; then
189 cp $TEMPLATE $SYSCONFIG
191 for var in $(awk -F'[ :]' '/^# [_A-Z0-9]+:/{print $2}' $TEMPLATE)
193 if ! grep $var $SYSCONFIG >/dev/null 2>&1; then
195 sed -n "/$var:/,/$var=/p" $TEMPLATE >> $SYSCONFIG
200 # Replace XenServer files by our versions.
201 mkdir -p %{_prefix}/xs-original \
202 || printf "Could not create script backup directory.\n"
204 /opt/xensource/libexec/interface-reconfigure \
205 /etc/xensource/scripts/vif \
206 /usr/sbin/xen-bugtool \
211 if [ "$t" != "%{_prefix}/scripts/$s" ]; then
212 mv "$f" %{_prefix}/xs-original/ \
213 || printf "Could not save original XenServer $s script\n"
214 ln -s "%{_prefix}/scripts/$s" "$f" \
215 || printf "Could not link to vSwitch $s script\n"
219 # Install xsconsole plugin
220 plugin=$(readlink /usr/lib/xsconsole/plugins-base/XSFeatureVSwitch.py)
221 if [ "$plugin" != "/root/vswitch/scripts/XSFeatureVSwitch.py" ]; then
222 rm -f /usr/lib/xsconsole/plugins-base/XSFeatureVSwitch.py
223 ln -s /root/vswitch/scripts/XSFeatureVSwitch.py /usr/lib/xsconsole/plugins-base/ || printf "Could not link to vSswitch xsconsole plugin.\n"
226 # Ensure all required services are set to run
227 for s in vswitch vswitch-xapi-update; do
228 if chkconfig --list $s >/dev/null 2>&1; then
229 chkconfig --del $s || printf "Could not remove $s init script."
231 chkconfig --add $s || printf "Could not add $s init script."
232 chkconfig $s on || printf "Could not enable $s init script."
235 if [ "$1" = "1" ]; then # $1 = 2 for upgrade
236 printf "\nYou MUST reboot the server NOW to complete the change to the\n"
237 printf "the vSwitch. Attempts to modify networking on the server\n"
238 printf "or any hosted VM will fail until after the reboot and could\n"
239 printf "leave the server in an state requiring manual recovery.\n\n"
241 printf "\nTo use the new vSwitch, you should reboot the server\n"
242 printf "now. Failure to do so may result in incorrect operation.\n\n"
246 if [ "$1" = "0" ]; then # $1 = 1 for upgrade
247 for s in vswitch vswitch-xapi-update; do
248 chkconfig --del $s || printf "Could not remove $s init script."
254 if [ "$1" = "0" ]; then # $1 = 1 for upgrade
256 rm -f /usr/lib/xsconsole/plugins-base/XSFeatureVSwitch.py \
257 /usr/lib/xsconsole/plugins-base/XSFeatureVSwitch.pyc \
258 /usr/lib/xsconsole/plugins-base/XSFeatureVSwitch.pyo \
259 || printf "Could not remove vSwitch xsconsole plugin.\n"
261 # Restore original XenServer scripts
263 /opt/xensource/libexec/interface-reconfigure \
264 /etc/xensource/scripts/vif \
265 /usr/sbin/xen-bugtool \
269 if [ ! -f "%{_prefix}/xs-original/$s" ]; then
270 printf "Original XenServer $s script not present in %{_prefix}/xs-original\n"
271 printf "Could not restore original XenServer script.\n"
274 && mv "%{_prefix}/xs-original/$s" "$f") \
275 || printf "Could not restore original XenServer $s script.\n"
279 find %{_prefix} -type d -depth -exec rmdir \{\} \; \
280 || printf "Could not remove vSwitch install directory.\n"
282 # Remove all configuration and log files
283 rm -f /etc/ovs-vswitchd.conf
284 rm -f /etc/sysconfig/vswitch
285 rm -f /var/log/vswitch*
286 rm -f /etc/ovs-vswitchd.cacert
287 rm -f /var/lib/openvswitch/dbcache
289 printf "\nYou MUST reboot the server now to complete the change to\n"
290 printf "standard Xen networking. Attempts to modify networking on the\n"
291 printf "server or any hosted VM will fail until after the reboot and\n"
292 printf "could leave the server in a state requiring manual recovery.\n\n"
297 %defattr(-,root,root)
299 /etc/init.d/vswitch-xapi-update
300 /etc/xapi.d/plugins/vswitch-cfg-update
301 /etc/logrotate.d/vswitch
302 /etc/profile.d/vswitch.sh
303 /root/vswitch/kernel_modules/brcompat_mod.ko
304 /root/vswitch/kernel_modules/openvswitch_mod.ko
305 /root/vswitch/kernel_modules/veth_mod.ko
306 /root/vswitch/scripts/dump-vif-details
307 /root/vswitch/scripts/refresh-xs-network-uuids
308 /root/vswitch/scripts/interface-reconfigure
309 /root/vswitch/scripts/vif
310 /root/vswitch/scripts/xen-bugtool
311 /root/vswitch/scripts/XSFeatureVSwitch.py
312 /root/vswitch/scripts/brctl
313 /root/vswitch/scripts/sysconfig.template
314 # Following two files are generated automatically by rpm. We don't
315 # really need them and they won't be used on the XenServer, but there
316 # isn't an obvious place to get rid of them since they are generated
317 # after the install script runs. Since they are small, we just
319 /root/vswitch/scripts/XSFeatureVSwitch.pyc
320 /root/vswitch/scripts/XSFeatureVSwitch.pyo
321 /root/vswitch/sbin/ovs-brcompatd
322 /root/vswitch/sbin/ovs-vswitchd
323 /root/vswitch/bin/ovs-appctl
324 /root/vswitch/bin/ovs-cfg-mod
325 /root/vswitch/bin/ovs-dpctl
326 /root/vswitch/bin/ovs-ofctl
327 /root/vswitch/share/man/man5/ovs-vswitchd.conf.5
328 /root/vswitch/share/man/man8/ovs-appctl.8
329 /root/vswitch/share/man/man8/ovs-brcompatd.8
330 /root/vswitch/share/man/man8/ovs-cfg-mod.8
331 /root/vswitch/share/man/man8/ovs-dpctl.8
332 /root/vswitch/share/man/man8/ovs-ofctl.8
333 /root/vswitch/share/man/man8/ovs-vswitchd.8