1 # Spec file for vswitch and related programs.
3 # Copyright (C) 2009 Nicira Networks, Inc.
5 # Copying and distribution of this file, with or without modification,
6 # are permitted in any medium without royalty provided the copyright
7 # notice and this notice are preserved. This file is offered as-is,
8 # without warranty of any kind.
10 # When building, the rpmbuild command line should define
11 # vswitch_version, xen_version, and build_number using -D arguments.
14 # rpmbuild -D "vswitch_version 0.8.9~1+build123" -D "xen_version 2.6.18-128.1.1.el5.xs5.1.0.483.1000xen" -D "build_number --with-build-number=123" -bb /usr/src/redhat/SPECS/vswitch-xen.spec
16 %define version %{vswitch_version}-%{xen_version}
17 %define _prefix /root/vswitch
20 Summary: Virtual switch
21 Group: System Environment/Daemons
22 URL: http://www.openvswitch.org/
23 Version: %{vswitch_version}
25 # The entire source code is ASL 2.0 except datapath/ which is GPLv2
26 License: ASL 2.0 and GPLv2
28 Source: openvswitch-%{vswitch_version}.tar.gz
29 Buildroot: /tmp/vswitch-xen-rpm
30 Requires: kernel-xen = %(echo '%{xen_version}' | sed 's/xen$//')
31 # The following Conflicts prevents the "vswitch" package generated by
32 # this spec file from installing at the same time as the "openvswitch"
33 # package shipped with XenServer 5.5.900. In fact, the packages
34 # contain some files with identical names anyhow, so they will not
35 # coexist, but adding an explicit Conflicts makes this conflict more
37 Conflicts: openvswitch
40 The vswitch provides standard network bridging functions augmented with
41 support for the OpenFlow protocol for remote per-flow control of
45 %setup -q -n openvswitch-%{vswitch_version}
48 ./configure --prefix=%{_prefix} --localstatedir=%{_localstatedir} --with-l26=/lib/modules/%{xen_version}/build --enable-ssl %{build_number}
52 rm -rf $RPM_BUILD_ROOT
53 make install DESTDIR=$RPM_BUILD_ROOT prefix=%{_prefix}
54 install -d -m 755 $RPM_BUILD_ROOT/etc
55 install -d -m 755 $RPM_BUILD_ROOT/etc/init.d
56 install -m 755 xenserver/etc_init.d_vswitch \
57 $RPM_BUILD_ROOT/etc/init.d/vswitch
58 install -m 755 xenserver/etc_init.d_vswitch-xapi-update \
59 $RPM_BUILD_ROOT/etc/init.d/vswitch-xapi-update
60 install -d -m 755 $RPM_BUILD_ROOT/etc/sysconfig
61 install -d -m 755 $RPM_BUILD_ROOT/etc/logrotate.d
62 install -m 755 xenserver/etc_logrotate.d_vswitch \
63 $RPM_BUILD_ROOT/etc/logrotate.d/vswitch
64 install -d -m 755 $RPM_BUILD_ROOT/etc/profile.d
65 install -m 755 xenserver/etc_profile.d_vswitch.sh \
66 $RPM_BUILD_ROOT/etc/profile.d/vswitch.sh
67 install -d -m 755 $RPM_BUILD_ROOT/etc/xapi.d/plugins
68 install -m 755 xenserver/etc_xapi.d_plugins_vswitch-cfg-update \
69 $RPM_BUILD_ROOT/etc/xapi.d/plugins/vswitch-cfg-update
70 install -d -m 755 $RPM_BUILD_ROOT%{_prefix}/scripts
71 install -m 755 xenserver/opt_xensource_libexec_interface-reconfigure \
72 $RPM_BUILD_ROOT%{_prefix}/scripts/interface-reconfigure
73 install -m 755 xenserver/etc_xensource_scripts_vif \
74 $RPM_BUILD_ROOT%{_prefix}/scripts/vif
75 install -m 755 xenserver/root_vswitch_scripts_dump-vif-details \
76 $RPM_BUILD_ROOT%{_prefix}/scripts/dump-vif-details
77 install -m 755 xenserver/usr_sbin_xen-bugtool \
78 $RPM_BUILD_ROOT%{_prefix}/scripts/xen-bugtool
79 install -m 755 xenserver/usr_sbin_brctl \
80 $RPM_BUILD_ROOT%{_prefix}/scripts/brctl
81 install -m 755 xenserver/root_vswitch_scripts_sysconfig.template \
82 $RPM_BUILD_ROOT/root/vswitch/scripts/sysconfig.template
84 xenserver/usr_lib_xsconsole_plugins-base_XSFeatureVSwitch.py \
85 $RPM_BUILD_ROOT%{_prefix}/scripts/XSFeatureVSwitch.py
87 install -d -m 755 $RPM_BUILD_ROOT%{_prefix}/kernel_modules
88 find datapath/linux-2.6 -name *.ko -exec install -m 755 \{\} $RPM_BUILD_ROOT%{_prefix}/kernel_modules/ \;
90 # Get rid of stuff we don't want to make RPM happy.
92 $RPM_BUILD_ROOT/root/vswitch/bin/ezio-term \
93 $RPM_BUILD_ROOT/root/vswitch/bin/ovs-controller \
94 $RPM_BUILD_ROOT/root/vswitch/bin/ovs-discover \
95 $RPM_BUILD_ROOT/root/vswitch/bin/ovs-kill \
96 $RPM_BUILD_ROOT/root/vswitch/bin/ovs-openflowd \
97 $RPM_BUILD_ROOT/root/vswitch/bin/ovs-pki \
98 $RPM_BUILD_ROOT/root/vswitch/bin/ovs-switchui \
99 $RPM_BUILD_ROOT/root/vswitch/bin/ovs-wdt \
100 $RPM_BUILD_ROOT/root/vswitch/kernel_modules/veth_mod.ko \
101 $RPM_BUILD_ROOT/root/vswitch/sbin/ovs-monitor \
102 $RPM_BUILD_ROOT/root/vswitch/share/man/man8/ovs-controller.8 \
103 $RPM_BUILD_ROOT/root/vswitch/share/man/man8/ovs-discover.8 \
104 $RPM_BUILD_ROOT/root/vswitch/share/man/man8/ovs-kill.8 \
105 $RPM_BUILD_ROOT/root/vswitch/share/man/man8/ovs-openflowd.8 \
106 $RPM_BUILD_ROOT/root/vswitch/share/man/man8/ovs-pki.8 \
107 $RPM_BUILD_ROOT/root/vswitch/share/openvswitch
110 rm -rf $RPM_BUILD_ROOT
113 if [ ! -f /etc/xensource-inventory ]; then
114 printf "XenSource inventory not present in /etc/xensource-inventory"
118 if [ "$1" = "1" ]; then
119 if md5sum -c --status <<EOF
120 ca141d60061dcfdade73e75abc6529b5 /usr/sbin/brctl
121 b8e9835862ef1a9cec2a3f477d26c989 /etc/xensource/scripts/vif
122 51970ad613a3996d5997e18e44db47da /opt/xensource/libexec/interface-reconfigure
123 5654c8c36699fcc8744ca9cd5b855414 /usr/sbin/xen-bugtool
126 printf "\nVerified host scripts from XenServer 5.5.0.\n\n"
127 elif md5sum -c --status <<EOF
128 ca141d60061dcfdade73e75abc6529b5 /usr/sbin/brctl
129 b8e9835862ef1a9cec2a3f477d26c989 /etc/xensource/scripts/vif
130 ce451d3c985fd1db6497a363f0d9dedb /opt/xensource/libexec/interface-reconfigure
131 2b53f500431fcba5276c896e9e4281b9 /usr/sbin/xen-bugtool
134 printf "\nVerified host scripts from XenServer 5.5.900.\n\n"
138 The original XenServer scripts replaced by this package are not those
139 of any supported version of XenServer. This could lead to unexpected
140 behavior of your server. Unless you are sure you know what you are
141 doing, it is highly recommended that you remove this package
142 immediately after the install completes, which will restore the
143 XenServer scripts that you were previously using.
149 if test ! -e /etc/ovs-vswitch.dbcache; then
150 if test "$1" = 1; then
151 printf "Creating xapi database cache... "
153 printf "warning: Open vSwitch is being re-installed or upgraded,\n"
154 printf " but the xapi database cache is missing.\n"
155 printf "Re-creating xapi database cache... "
158 source /etc/xensource-inventory
159 if python - "$INSTALLATION_UUID" <<EOF
164 session = XenAPI.xapi_local()
166 session.xenapi.login_with_password("root", "")
168 vlans = session.xenapi.VLAN.get_all_records()
169 bonds = session.xenapi.Bond.get_all_records()
170 pifs = session.xenapi.PIF.get_all_records()
171 networks = session.xenapi.network.get_all_records()
172 host = session.xenapi.host.get_by_uuid(sys.argv[1])
174 session.xenapi.session.logout()
176 dbcache_file = "/etc/ovs-vswitch.dbcache"
177 f = open(dbcache_file, 'w')
178 pickle.dump({'vlans': vlans,
181 'networks': networks}, f)
182 pickle.dump({'host': host}, f)
189 printf "Open vSwitch can only be installed on a XenServer that\n"
190 printf "has connectivity to xapi on the pool master. Please\n"
191 printf "fix connectivity to the pool master, then try again.\n"
197 if grep -F net.ipv4.conf.all.arp_filter /etc/sysctl.conf >/dev/null 2>&1; then :; else
198 cat >>/etc/sysctl.conf <<EOF
199 # This works around an issue in xhad, which binds to a particular
200 # Ethernet device, which in turn causes ICMP port unreachable messages
201 # if packets are received are on the wrong interface, which in turn
202 # can happen if we send out ARP replies on every interface (as Linux
203 # does by default) instead of just on the interface that has the IP
204 # address being ARPed for, which this sysctl setting in turn works
208 net.ipv4.conf.all.arp_filter = 1
212 # Ensure ovs-vswitchd.conf exists
213 touch /etc/ovs-vswitchd.conf
215 # Create default or update existing /etc/sysconfig/vswitch.
216 SYSCONFIG=/etc/sysconfig/vswitch
217 TEMPLATE=/root/vswitch/scripts/sysconfig.template
218 if [ ! -e $SYSCONFIG ]; then
219 cp $TEMPLATE $SYSCONFIG
221 for var in $(awk -F'[ :]' '/^# [_A-Z0-9]+:/{print $2}' $TEMPLATE)
223 if ! grep $var $SYSCONFIG >/dev/null 2>&1; then
225 sed -n "/$var:/,/$var=/p" $TEMPLATE >> $SYSCONFIG
230 # Replace XenServer files by our versions.
231 mkdir -p %{_prefix}/xs-original \
232 || printf "Could not create script backup directory.\n"
234 /opt/xensource/libexec/interface-reconfigure \
235 /etc/xensource/scripts/vif \
236 /usr/sbin/xen-bugtool \
241 if [ "$t" != "%{_prefix}/scripts/$s" ]; then
242 mv "$f" %{_prefix}/xs-original/ \
243 || printf "Could not save original XenServer $s script\n"
244 ln -s "%{_prefix}/scripts/$s" "$f" \
245 || printf "Could not link to vSwitch $s script\n"
249 # Install xsconsole plugin
250 plugin=$(readlink /usr/lib/xsconsole/plugins-base/XSFeatureVSwitch.py)
251 if [ "$plugin" != "/root/vswitch/scripts/XSFeatureVSwitch.py" ]; then
252 rm -f /usr/lib/xsconsole/plugins-base/XSFeatureVSwitch.py
253 ln -s /root/vswitch/scripts/XSFeatureVSwitch.py /usr/lib/xsconsole/plugins-base/ || printf "Could not link to vSswitch xsconsole plugin.\n"
256 # Ensure all required services are set to run
257 for s in vswitch vswitch-xapi-update; do
258 if chkconfig --list $s >/dev/null 2>&1; then
259 chkconfig --del $s || printf "Could not remove $s init script."
261 chkconfig --add $s || printf "Could not add $s init script."
262 chkconfig $s on || printf "Could not enable $s init script."
265 if [ "$1" = "1" ]; then # $1 = 2 for upgrade
266 printf "\nYou MUST reboot the server NOW to complete the change to the\n"
267 printf "the vSwitch. Attempts to modify networking on the server\n"
268 printf "or any hosted VM will fail until after the reboot and could\n"
269 printf "leave the server in an state requiring manual recovery.\n\n"
271 printf "\nTo use the new vSwitch, you should reboot the server\n"
272 printf "now. Failure to do so may result in incorrect operation.\n\n"
276 if [ "$1" = "0" ]; then # $1 = 1 for upgrade
277 for s in vswitch vswitch-xapi-update; do
278 chkconfig --del $s || printf "Could not remove $s init script."
284 if [ "$1" = "0" ]; then # $1 = 1 for upgrade
286 rm -f /usr/lib/xsconsole/plugins-base/XSFeatureVSwitch.py \
287 /usr/lib/xsconsole/plugins-base/XSFeatureVSwitch.pyc \
288 /usr/lib/xsconsole/plugins-base/XSFeatureVSwitch.pyo \
289 || printf "Could not remove vSwitch xsconsole plugin.\n"
291 # Restore original XenServer scripts
293 /opt/xensource/libexec/interface-reconfigure \
294 /etc/xensource/scripts/vif \
295 /usr/sbin/xen-bugtool \
299 if [ ! -f "%{_prefix}/xs-original/$s" ]; then
300 printf "Original XenServer $s script not present in %{_prefix}/xs-original\n"
301 printf "Could not restore original XenServer script.\n"
304 && mv "%{_prefix}/xs-original/$s" "$f") \
305 || printf "Could not restore original XenServer $s script.\n"
309 find %{_prefix} -type d -depth -exec rmdir \{\} \; \
310 || printf "Could not remove vSwitch install directory.\n"
312 # Remove all configuration files
313 rm -f /etc/ovs-vswitchd.conf
314 rm -f /etc/sysconfig/vswitch
315 rm -f /etc/ovs-vswitchd.cacert
317 printf "\nYou MUST reboot the server now to complete the change to\n"
318 printf "standard Xen networking. Attempts to modify networking on the\n"
319 printf "server or any hosted VM will fail until after the reboot and\n"
320 printf "could leave the server in a state requiring manual recovery.\n\n"
325 %defattr(-,root,root)
327 /etc/init.d/vswitch-xapi-update
328 /etc/xapi.d/plugins/vswitch-cfg-update
329 /etc/logrotate.d/vswitch
330 /etc/profile.d/vswitch.sh
331 /root/vswitch/kernel_modules/brcompat_mod.ko
332 /root/vswitch/kernel_modules/openvswitch_mod.ko
333 /root/vswitch/scripts/dump-vif-details
334 /root/vswitch/scripts/interface-reconfigure
335 /root/vswitch/scripts/vif
336 /root/vswitch/scripts/xen-bugtool
337 /root/vswitch/scripts/XSFeatureVSwitch.py
338 /root/vswitch/scripts/brctl
339 /root/vswitch/scripts/sysconfig.template
340 # Following two files are generated automatically by rpm. We don't
341 # really need them and they won't be used on the XenServer, but there
342 # isn't an obvious place to get rid of them since they are generated
343 # after the install script runs. Since they are small, we just
345 /root/vswitch/scripts/XSFeatureVSwitch.pyc
346 /root/vswitch/scripts/XSFeatureVSwitch.pyo
347 /root/vswitch/sbin/ovs-brcompatd
348 /root/vswitch/sbin/ovs-vswitchd
349 /root/vswitch/bin/ovs-appctl
350 /root/vswitch/bin/ovs-cfg-mod
351 /root/vswitch/bin/ovs-dpctl
352 /root/vswitch/bin/ovs-ofctl
353 /root/vswitch/share/man/man5/ovs-vswitchd.conf.5
354 /root/vswitch/share/man/man8/ovs-appctl.8
355 /root/vswitch/share/man/man8/ovs-brcompatd.8
356 /root/vswitch/share/man/man8/ovs-cfg-mod.8
357 /root/vswitch/share/man/man8/ovs-dpctl.8
358 /root/vswitch/share/man/man8/ovs-ofctl.8
359 /root/vswitch/share/man/man8/ovs-vswitchd.8