1 # Spec file for vswitch and related programs.
3 # Copyright (C) 2009, 2010 Nicira Networks, Inc.
5 # Copying and distribution of this file, with or without modification,
6 # are permitted in any medium without royalty provided the copyright
7 # notice and this notice are preserved. This file is offered as-is,
8 # without warranty of any kind.
10 # When building, the rpmbuild command line should define
11 # vswitch_version, xen_version, and build_number using -D arguments.
14 # rpmbuild -D "vswitch_version 0.8.9~1+build123" -D "xen_version 2.6.18-128.1.1.el5.xs5.1.0.483.1000xen" -D "build_number --with-build-number=123" -bb /usr/src/redhat/SPECS/vswitch-xen.spec
16 %define version %{vswitch_version}-%{xen_version}
19 Summary: Virtual switch
20 Group: System Environment/Daemons
21 URL: http://www.openvswitch.org/
22 Version: %{vswitch_version}
24 # The entire source code is ASL 2.0 except datapath/ which is GPLv2
25 License: ASL 2.0 and GPLv2
27 Source: openvswitch-%{vswitch_version}.tar.gz
28 Buildroot: /tmp/vswitch-xen-rpm
29 Requires: kernel-xen = %(echo '%{xen_version}' | sed 's/xen$//')
30 # The following Conflicts prevents the "vswitch" package generated by
31 # this spec file from installing at the same time as the "openvswitch"
32 # package shipped with XenServer 5.5.900. In fact, the packages
33 # contain some files with identical names anyhow, so they will not
34 # coexist, but adding an explicit Conflicts makes this conflict more
36 Conflicts: openvswitch
39 The vswitch provides standard network bridging functions augmented with
40 support for the OpenFlow protocol for remote per-flow control of
44 %setup -q -n openvswitch-%{vswitch_version}
47 ./configure --prefix=/usr --sysconfdir=/etc --localstatedir=%{_localstatedir} --with-l26=/lib/modules/%{xen_version}/build --enable-ssl %{build_number}
51 rm -rf $RPM_BUILD_ROOT
52 make install DESTDIR=$RPM_BUILD_ROOT
53 install -d -m 755 $RPM_BUILD_ROOT/etc
54 install -d -m 755 $RPM_BUILD_ROOT/etc/init.d
55 install -m 755 xenserver/etc_init.d_vswitch \
56 $RPM_BUILD_ROOT/etc/init.d/vswitch
57 install -m 755 xenserver/etc_init.d_vswitch-xapi-update \
58 $RPM_BUILD_ROOT/etc/init.d/vswitch-xapi-update
59 install -d -m 755 $RPM_BUILD_ROOT/etc/sysconfig
60 install -d -m 755 $RPM_BUILD_ROOT/etc/logrotate.d
61 install -m 755 xenserver/etc_logrotate.d_vswitch \
62 $RPM_BUILD_ROOT/etc/logrotate.d/vswitch
63 install -d -m 755 $RPM_BUILD_ROOT/etc/profile.d
64 install -m 755 xenserver/etc_profile.d_vswitch.sh \
65 $RPM_BUILD_ROOT/etc/profile.d/vswitch.sh
66 install -d -m 755 $RPM_BUILD_ROOT/etc/xapi.d/plugins
67 install -m 755 xenserver/etc_xapi.d_plugins_vswitch-cfg-update \
68 $RPM_BUILD_ROOT/etc/xapi.d/plugins/vswitch-cfg-update
69 install -d -m 755 $RPM_BUILD_ROOT/usr/share/vswitch/scripts
70 install -m 644 vswitchd/vswitch.ovsschema \
71 $RPM_BUILD_ROOT/usr/share/vswitch/vswitch.ovsschema
72 install -m 755 xenserver/opt_xensource_libexec_interface-reconfigure \
73 $RPM_BUILD_ROOT/usr/share/vswitch/scripts/interface-reconfigure
74 install -m 644 xenserver/opt_xensource_libexec_InterfaceReconfigure.py \
75 $RPM_BUILD_ROOT/usr/share/vswitch/scripts/InterfaceReconfigure.py
76 install -m 644 xenserver/opt_xensource_libexec_InterfaceReconfigureBridge.py \
77 $RPM_BUILD_ROOT/usr/share/vswitch/scripts/InterfaceReconfigureBridge.py
78 install -m 644 xenserver/opt_xensource_libexec_InterfaceReconfigureVswitch.py \
79 $RPM_BUILD_ROOT/usr/share/vswitch/scripts/InterfaceReconfigureVswitch.py
80 install -m 755 xenserver/etc_xensource_scripts_vif \
81 $RPM_BUILD_ROOT/usr/share/vswitch/scripts/vif
82 install -m 755 xenserver/usr_share_vswitch_scripts_refresh-xs-network-uuids \
83 $RPM_BUILD_ROOT/usr/share/vswitch/scripts/refresh-xs-network-uuids
84 install -m 755 xenserver/usr_sbin_xen-bugtool \
85 $RPM_BUILD_ROOT/usr/share/vswitch/scripts/xen-bugtool
86 install -m 755 xenserver/usr_sbin_brctl \
87 $RPM_BUILD_ROOT/usr/share/vswitch/scripts/brctl
88 install -m 755 xenserver/usr_share_vswitch_scripts_sysconfig.template \
89 $RPM_BUILD_ROOT/usr/share/vswitch/scripts/sysconfig.template
91 xenserver/usr_lib_xsconsole_plugins-base_XSFeatureVSwitch.py \
92 $RPM_BUILD_ROOT/usr/share/vswitch/scripts/XSFeatureVSwitch.py
94 install -d -m 755 $RPM_BUILD_ROOT/lib/modules/%{xen_version}/kernel/net/vswitch
95 find datapath/linux-2.6 -name *.ko -exec install -m 755 \{\} $RPM_BUILD_ROOT/lib/modules/%{xen_version}/kernel/net/vswitch \;
97 # Get rid of stuff we don't want to make RPM happy.
99 $RPM_BUILD_ROOT/usr/bin/ovs-controller \
100 $RPM_BUILD_ROOT/usr/bin/ovs-discover \
101 $RPM_BUILD_ROOT/usr/bin/ovs-kill \
102 $RPM_BUILD_ROOT/usr/bin/ovs-openflowd \
103 $RPM_BUILD_ROOT/usr/bin/ovs-pki \
104 $RPM_BUILD_ROOT/usr/bin/ovs-wdt \
105 $RPM_BUILD_ROOT/usr/sbin/ovs-monitor \
106 $RPM_BUILD_ROOT/usr/share/man/man8/ovs-controller.8 \
107 $RPM_BUILD_ROOT/usr/share/man/man8/ovs-discover.8 \
108 $RPM_BUILD_ROOT/usr/share/man/man8/ovs-kill.8 \
109 $RPM_BUILD_ROOT/usr/share/man/man8/ovs-openflowd.8 \
110 $RPM_BUILD_ROOT/usr/share/man/man8/ovs-pki.8
111 rm -f $RPM_BUILD_ROOT/lib/modules/%{xen_version}/kernel/net/vswitch/veth_mod.ko
113 install -d -m 755 $RPM_BUILD_ROOT/var/lib/openvswitch
116 rm -rf $RPM_BUILD_ROOT
119 if [ ! -f /etc/xensource-inventory ]; then
120 printf "XenSource inventory not present in /etc/xensource-inventory"
124 if [ "$1" = "1" ]; then
125 if md5sum -c --status <<EOF
126 ca141d60061dcfdade73e75abc6529b5 /usr/sbin/brctl
127 b8e9835862ef1a9cec2a3f477d26c989 /etc/xensource/scripts/vif
128 51970ad613a3996d5997e18e44db47da /opt/xensource/libexec/interface-reconfigure
129 5654c8c36699fcc8744ca9cd5b855414 /usr/sbin/xen-bugtool
132 printf "\nVerified host scripts from XenServer 5.5.0.\n\n"
133 elif md5sum -c --status <<EOF
134 ca141d60061dcfdade73e75abc6529b5 /usr/sbin/brctl
135 b8e9835862ef1a9cec2a3f477d26c989 /etc/xensource/scripts/vif
136 51970ad613a3996d5997e18e44db47da /opt/xensource/libexec/interface-reconfigure
137 f6519085c2fc5f7bc4eccc294ed62000 /usr/sbin/xen-bugtool
140 printf "\nVerified host scripts from XenServer 5.5.0-24648p (Update 1)\n"
141 printf "or 5.5.0-25727p (Update 2).\n\n"
142 elif md5sum -c --status <<EOF
143 ca141d60061dcfdade73e75abc6529b5 /usr/sbin/brctl
144 b8e9835862ef1a9cec2a3f477d26c989 /etc/xensource/scripts/vif
145 ce451d3c985fd1db6497a363f0d9dedb /opt/xensource/libexec/interface-reconfigure
146 2b53f500431fcba5276c896e9e4281b9 /usr/sbin/xen-bugtool
149 printf "\nVerified host scripts from XenServer 5.5.900.\n\n"
153 The original XenServer scripts replaced by this package are not those
154 of any supported version of XenServer. This could lead to unexpected
155 behavior of your server. Unless you are sure you know what you are
156 doing, it is highly recommended that you remove this package
157 immediately after the install completes, which will restore the
158 XenServer scripts that you were previously using.
164 if test ! -e /var/xapi/network.dbcache; then
165 if test "$1" = 1; then
166 printf "Creating xapi database cache... "
168 printf "warning: Open vSwitch is being re-installed or upgraded,\n"
169 printf " but the xapi database cache is missing.\n"
170 printf "Re-creating xapi database cache... "
173 if /usr/share/vswitch/scripts/interface-reconfigure rewrite; then
177 printf "Open vSwitch can only be installed on a XenServer that\n"
178 printf "has connectivity to xapi on the pool master. Please\n"
179 printf "fix connectivity to the pool master, then try again.\n"
184 # Ensure that modprobe will find our modules.
185 depmod %{xen_version}
187 if grep -F net.ipv4.conf.all.arp_filter /etc/sysctl.conf >/dev/null 2>&1; then :; else
188 cat >>/etc/sysctl.conf <<EOF
189 # This works around an issue in xhad, which binds to a particular
190 # Ethernet device, which in turn causes ICMP port unreachable messages
191 # if packets are received are on the wrong interface, which in turn
192 # can happen if we send out ARP replies on every interface (as Linux
193 # does by default) instead of just on the interface that has the IP
194 # address being ARPed for, which this sysctl setting in turn works
198 net.ipv4.conf.all.arp_filter = 1
202 if test ! -e /etc/ovs-vswitchd.conf.db; then
203 # Create ovs-vswitchd config database
204 ovsdb-tool -vANY:console:emer create /etc/ovs-vswitchd.conf.db \
205 /usr/share/vswitch/vswitch.ovsschema \
207 # Create initial table in config database
208 ovsdb-tool -vANY:console:emer transact /etc/ovs-vswitchd.conf.db \
209 '[{"op": "insert", "table": "Open_vSwitch", "row": {}}]' \
213 # Create default or update existing /etc/sysconfig/vswitch.
214 SYSCONFIG=/etc/sysconfig/vswitch
215 TEMPLATE=/usr/share/vswitch/scripts/sysconfig.template
216 if [ ! -e $SYSCONFIG ]; then
217 cp $TEMPLATE $SYSCONFIG
219 for var in $(awk -F'[ :]' '/^# [_A-Z0-9]+:/{print $2}' $TEMPLATE)
221 if ! grep $var $SYSCONFIG >/dev/null 2>&1; then
223 sed -n "/$var:/,/$var=/p" $TEMPLATE >> $SYSCONFIG
228 # Replace XenServer files by our versions.
229 mkdir -p /usr/lib/vswitch/xs-original \
230 || printf "Could not create script backup directory.\n"
232 /opt/xensource/libexec/interface-reconfigure \
233 /opt/xensource/libexec/InterfaceReconfigure.py \
234 /opt/xensource/libexec/InterfaceReconfigureBridge.py \
235 /opt/xensource/libexec/InterfaceReconfigureVswitch.py \
236 /etc/xensource/scripts/vif \
237 /usr/sbin/xen-bugtool \
242 if [ -f "$f" ] && [ "$t" != "/usr/share/vswitch/scripts/$s" ]; then
243 mv "$f" /usr/lib/vswitch/xs-original/ \
244 || printf "Could not save original XenServer $s script\n"
245 ln -s "/usr/share/vswitch/scripts/$s" "$f" \
246 || printf "Could not link to vSwitch $s script\n"
250 # Install xsconsole plugin
251 plugin=$(readlink /usr/lib/xsconsole/plugins-base/XSFeatureVSwitch.py)
252 if [ "$plugin" != "/usr/share/vswitch/scripts/XSFeatureVSwitch.py" ]; then
253 rm -f /usr/lib/xsconsole/plugins-base/XSFeatureVSwitch.py
254 ln -s /usr/share/vswitch/scripts/XSFeatureVSwitch.py /usr/lib/xsconsole/plugins-base/ || printf "Could not link to vSswitch xsconsole plugin.\n"
257 # Ensure all required services are set to run
258 for s in vswitch vswitch-xapi-update; do
259 if chkconfig --list $s >/dev/null 2>&1; then
260 chkconfig --del $s || printf "Could not remove $s init script."
262 chkconfig --add $s || printf "Could not add $s init script."
263 chkconfig $s on || printf "Could not enable $s init script."
266 # Configure system to use vswitch
267 echo vswitch > /etc/xensource/network.conf
269 if [ "$1" = "1" ]; then # $1 = 2 for upgrade
270 printf "\nYou MUST reboot the server NOW to complete the change to the\n"
271 printf "the vSwitch. Attempts to modify networking on the server\n"
272 printf "or any hosted VM will fail until after the reboot and could\n"
273 printf "leave the server in an state requiring manual recovery.\n\n"
275 printf "\nTo use the new vSwitch, you should reboot the server\n"
276 printf "now. Failure to do so may result in incorrect operation.\n\n"
280 if [ "$1" = "0" ]; then # $1 = 1 for upgrade
281 for s in vswitch vswitch-xapi-update; do
282 chkconfig --del $s || printf "Could not remove $s init script."
288 if [ "$1" = "0" ]; then # $1 = 1 for upgrade
290 rm -f /usr/lib/xsconsole/plugins-base/XSFeatureVSwitch.py \
291 /usr/lib/xsconsole/plugins-base/XSFeatureVSwitch.pyc \
292 /usr/lib/xsconsole/plugins-base/XSFeatureVSwitch.pyo \
293 || printf "Could not remove vSwitch xsconsole plugin.\n"
295 # Restore original XenServer scripts
297 /opt/xensource/libexec/interface-reconfigure \
298 /etc/xensource/scripts/vif \
299 /usr/sbin/xen-bugtool \
303 if [ ! -f "/usr/lib/vswitch/xs-original/$s" ]; then
304 printf "Original XenServer $s script not present in /usr/lib/vswitch/xs-original\n"
305 printf "Could not restore original XenServer script.\n"
308 && mv "/usr/lib/vswitch/xs-original/$s" "$f") \
309 || printf "Could not restore original XenServer $s script.\n"
313 # Remove all configuration files
314 rm -f /etc/ovs-vswitchd.conf.db
315 rm -f /etc/sysconfig/vswitch
316 rm -f /etc/ovs-vswitchd.cacert
317 rm -f /var/xapi/network.dbcache
319 # Configure system to use bridge
320 echo bridge > /etc/xensource/network.conf
322 printf "\nYou MUST reboot the server now to complete the change to\n"
323 printf "standard Xen networking. Attempts to modify networking on the\n"
324 printf "server or any hosted VM will fail until after the reboot and\n"
325 printf "could leave the server in a state requiring manual recovery.\n\n"
330 %defattr(-,root,root)
332 /etc/init.d/vswitch-xapi-update
333 /etc/xapi.d/plugins/vswitch-cfg-update
334 /etc/logrotate.d/vswitch
335 /etc/profile.d/vswitch.sh
336 /lib/modules/%{xen_version}/kernel/net/vswitch/openvswitch_mod.ko
337 /lib/modules/%{xen_version}/kernel/net/vswitch/brcompat_mod.ko
338 %if %(echo '%{xen_version}'|awk -F"." '{if ($3>=18) print 1; else print 0;}')
339 /lib/modules/%{xen_version}/kernel/net/vswitch/ip_gre_mod.ko
341 /usr/share/vswitch/scripts/refresh-xs-network-uuids
342 /usr/share/vswitch/scripts/interface-reconfigure
343 /usr/share/vswitch/scripts/InterfaceReconfigure.py
344 /usr/share/vswitch/scripts/InterfaceReconfigureBridge.py
345 /usr/share/vswitch/scripts/InterfaceReconfigureVswitch.py
346 /usr/share/vswitch/scripts/vif
347 /usr/share/vswitch/scripts/xen-bugtool
348 /usr/share/vswitch/scripts/XSFeatureVSwitch.py
349 /usr/share/vswitch/scripts/brctl
350 /usr/share/vswitch/scripts/sysconfig.template
351 /usr/share/vswitch/vswitch.ovsschema
352 /usr/sbin/ovs-brcompatd
353 /usr/sbin/ovs-vswitchd
354 /usr/sbin/ovsdb-server
359 /usr/bin/ovsdb-client
361 /usr/share/man/man1/ovsdb-client.1.gz
362 /usr/share/man/man1/ovsdb-server.1.gz
363 /usr/share/man/man1/ovsdb-tool.1.gz
364 /usr/share/man/man8/ovs-appctl.8.gz
365 /usr/share/man/man8/ovs-brcompatd.8.gz
366 /usr/share/man/man8/ovs-dpctl.8.gz
367 /usr/share/man/man8/ovs-ofctl.8.gz
368 /usr/share/man/man8/ovs-vsctl.8.gz
369 /usr/share/man/man8/ovs-vswitchd.8.gz
371 %exclude /usr/share/vswitch/scripts/*.pyc
372 %exclude /usr/share/vswitch/scripts/*.pyo