2 * Copyright (c) 2008, 2009, 2010, 2011 Nicira Networks.
4 * Licensed under the Apache License, Version 2.0 (the "License");
5 * you may not use this file except in compliance with the License.
6 * You may obtain a copy of the License at:
8 * http://www.apache.org/licenses/LICENSE-2.0
10 * Unless required by applicable law or agreed to in writing, software
11 * distributed under the License is distributed on an "AS IS" BASIS,
12 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
13 * See the License for the specific language governing permissions and
14 * limitations under the License.
22 #include <netinet/in.h>
27 #include "command-line.h"
33 #include "leak-checker.h"
37 #include "ofproto/ofproto.h"
38 #include "openflow/openflow.h"
40 #include "poll-loop.h"
42 #include "stream-ssl.h"
49 VLOG_DEFINE_THIS_MODULE(openflowd);
51 /* Settings that may be configured by the user. */
53 const char *unixctl_path; /* File name for unixctl socket. */
55 /* Controller configuration. */
56 struct ofproto_controller *controllers;
58 enum ofproto_fail_mode fail_mode;
59 bool run_forever; /* Continue running even with no controller? */
62 uint64_t datapath_id; /* Datapath ID. */
63 char *dp_name; /* Name of local datapath. */
64 char *dp_type; /* Type of local datapath. */
65 struct sset ports; /* Set of ports to add to datapath (if any). */
67 /* Description strings. */
68 const char *mfr_desc; /* Manufacturer. */
69 const char *hw_desc; /* Hardware. */
70 const char *sw_desc; /* Software version. */
71 const char *serial_desc; /* Serial number. */
72 const char *dp_desc; /* Datapath description. */
74 /* Related vconns and network devices. */
75 struct sset snoops; /* Listen for controller snooping conns. */
77 /* Failure behavior. */
78 int max_idle; /* Idle time for flows in fail-open mode. */
81 struct sset netflow; /* NetFlow targets. */
84 static unixctl_cb_func ovs_openflowd_exit;
86 static void parse_options(int argc, char *argv[], struct ofsettings *);
87 static void usage(void) NO_RETURN;
90 main(int argc, char *argv[])
92 struct unixctl_server *unixctl;
93 struct ofproto *ofproto;
96 struct netflow_options nf_options;
100 proctitle_init(argc, argv);
101 set_program_name(argv[0]);
102 parse_options(argc, argv, &s);
103 signal(SIGPIPE, SIG_IGN);
107 /* Start listening for ovs-appctl requests. */
108 error = unixctl_server_create(s.unixctl_path, &unixctl);
113 unixctl_command_register("exit", ovs_openflowd_exit, &exiting);
115 VLOG_INFO("Open vSwitch version %s", VERSION BUILDNR);
116 VLOG_INFO("OpenFlow protocol version 0x%02x", OFP_VERSION);
118 error = ofproto_create(s.dp_name, s.dp_type, &ofproto);
120 VLOG_FATAL("could not initialize OpenFlow switch (%s)",
124 /* Add ports to the datapath if requested by the user. */
125 SSET_FOR_EACH (port, &s.ports) {
126 struct netdev *netdev;
128 error = netdev_open_default(port, &netdev);
130 VLOG_FATAL("%s: failed to open network device (%s)",
131 port, strerror(error));
134 error = ofproto_port_add(ofproto, netdev, NULL);
136 VLOG_FATAL("failed to add %s as a port (%s)",
137 port, strerror(error));
140 netdev_close(netdev);
143 /* Configure OpenFlow switch. */
145 ofproto_set_datapath_id(ofproto, s.datapath_id);
147 ofproto_set_desc(ofproto, s.mfr_desc, s.hw_desc, s.sw_desc,
148 s.serial_desc, s.dp_desc);
149 error = ofproto_set_snoops(ofproto, &s.snoops);
151 VLOG_FATAL("failed to configure controller snooping connections (%s)",
154 memset(&nf_options, 0, sizeof nf_options);
155 nf_options.collectors = s.netflow;
156 error = ofproto_set_netflow(ofproto, &nf_options);
158 VLOG_FATAL("failed to configure NetFlow collectors (%s)",
161 ofproto_set_controllers(ofproto, s.controllers, s.n_controllers);
162 ofproto_set_fail_mode(ofproto, s.fail_mode);
164 daemonize_complete();
167 while (!exiting && (s.run_forever || ofproto_is_alive(ofproto))) {
168 error = ofproto_run(ofproto);
170 VLOG_FATAL("unrecoverable datapath error (%s)", strerror(error));
172 unixctl_server_run(unixctl);
176 ofproto_wait(ofproto);
177 unixctl_server_wait(unixctl);
181 poll_immediate_wake();
186 ofproto_destroy(ofproto);
192 ovs_openflowd_exit(struct unixctl_conn *conn, const char *args OVS_UNUSED,
195 bool *exiting = exiting_;
197 unixctl_command_reply(conn, 200, NULL);
200 /* User interface. */
202 /* Breaks 'ports' apart at commas and adds each resulting word to 'ports'. */
204 parse_ports(const char *s_, struct sset *ports)
206 char *s = xstrdup(s_);
207 char *save_ptr = NULL;
210 for (token = strtok_r(s, ",", &save_ptr); token != NULL;
211 token = strtok_r(NULL, ",", &save_ptr)) {
212 sset_add(ports, token);
218 parse_options(int argc, char *argv[], struct ofsettings *s)
221 OPT_DATAPATH_ID = UCHAR_MAX + 1,
229 OPT_INACTIVITY_PROBE,
235 OPT_BOOTSTRAP_CA_CERT,
243 LEAK_CHECKER_OPTION_ENUMS,
246 static struct option long_options[] = {
247 {"datapath-id", required_argument, 0, OPT_DATAPATH_ID},
248 {"mfr-desc", required_argument, 0, OPT_MFR_DESC},
249 {"hw-desc", required_argument, 0, OPT_HW_DESC},
250 {"sw-desc", required_argument, 0, OPT_SW_DESC},
251 {"serial-desc", required_argument, 0, OPT_SERIAL_DESC},
252 {"dp-desc", required_argument, 0, OPT_DP_DESC},
253 {"config", required_argument, 0, 'F'},
254 {"br-name", required_argument, 0, OPT_BR_NAME},
255 {"fail", required_argument, 0, OPT_FAIL_MODE},
256 {"inactivity-probe", required_argument, 0, OPT_INACTIVITY_PROBE},
257 {"max-idle", required_argument, 0, OPT_MAX_IDLE},
258 {"max-backoff", required_argument, 0, OPT_MAX_BACKOFF},
259 {"listen", required_argument, 0, 'l'},
260 {"snoop", required_argument, 0, OPT_SNOOP},
261 {"rate-limit", optional_argument, 0, OPT_RATE_LIMIT},
262 {"burst-limit", required_argument, 0, OPT_BURST_LIMIT},
263 {"out-of-band", no_argument, 0, OPT_OUT_OF_BAND},
264 {"in-band", no_argument, 0, OPT_IN_BAND},
265 {"netflow", required_argument, 0, OPT_NETFLOW},
266 {"ports", required_argument, 0, OPT_PORTS},
267 {"unixctl", required_argument, 0, OPT_UNIXCTL},
268 {"enable-dummy", no_argument, 0, OPT_ENABLE_DUMMY},
269 {"verbose", optional_argument, 0, 'v'},
270 {"help", no_argument, 0, 'h'},
271 {"version", no_argument, 0, 'V'},
274 LEAK_CHECKER_LONG_OPTIONS,
276 STREAM_SSL_LONG_OPTIONS
277 {"bootstrap-ca-cert", required_argument, 0, OPT_BOOTSTRAP_CA_CERT},
281 char *short_options = long_options_to_short_options(long_options);
282 struct ofproto_controller controller_opts;
283 struct sset controllers;
287 /* Set defaults that we can figure out before parsing options. */
288 controller_opts.target = NULL;
289 controller_opts.max_backoff = 8;
290 controller_opts.probe_interval = 5;
291 controller_opts.band = OFPROTO_IN_BAND;
292 controller_opts.rate_limit = 0;
293 controller_opts.burst_limit = 0;
294 s->unixctl_path = NULL;
295 s->fail_mode = OFPROTO_FAIL_STANDALONE;
300 s->serial_desc = NULL;
302 sset_init(&controllers);
303 sset_init(&s->snoops);
305 sset_init(&s->netflow);
306 sset_init(&s->ports);
310 c = getopt_long(argc, argv, short_options, long_options, NULL);
316 case OPT_DATAPATH_ID:
317 if (!dpid_from_string(optarg, &s->datapath_id)) {
318 VLOG_FATAL("argument to --datapath-id must be exactly 16 hex "
319 "digits and may not be all-zero");
324 s->mfr_desc = optarg;
335 case OPT_SERIAL_DESC:
336 s->serial_desc = optarg;
344 if (!strcmp(optarg, "open") || !strcmp(optarg, "standalone")) {
345 s->fail_mode = OFPROTO_FAIL_STANDALONE;
346 } else if (!strcmp(optarg, "closed")
347 || !strcmp(optarg, "secure")) {
348 s->fail_mode = OFPROTO_FAIL_SECURE;
350 VLOG_FATAL("--fail argument must be \"standalone\" "
355 case OPT_INACTIVITY_PROBE:
356 controller_opts.probe_interval = atoi(optarg);
357 if (controller_opts.probe_interval < 5) {
358 VLOG_FATAL("--inactivity-probe argument must be at least 5");
363 if (!strcmp(optarg, "permanent")) {
364 s->max_idle = OFP_FLOW_PERMANENT;
366 s->max_idle = atoi(optarg);
367 if (s->max_idle < 1 || s->max_idle > 65535) {
368 VLOG_FATAL("--max-idle argument must be between 1 and "
369 "65535 or the word 'permanent'");
374 case OPT_MAX_BACKOFF:
375 controller_opts.max_backoff = atoi(optarg);
376 if (controller_opts.max_backoff < 1) {
377 VLOG_FATAL("--max-backoff argument must be at least 1");
378 } else if (controller_opts.max_backoff > 3600) {
379 controller_opts.max_backoff = 3600;
385 controller_opts.rate_limit = atoi(optarg);
386 if (controller_opts.rate_limit < 1) {
387 VLOG_FATAL("--rate-limit argument must be at least 1");
390 controller_opts.rate_limit = 1000;
394 case OPT_BURST_LIMIT:
395 controller_opts.burst_limit = atoi(optarg);
396 if (controller_opts.burst_limit < 1) {
397 VLOG_FATAL("--burst-limit argument must be at least 1");
401 case OPT_OUT_OF_BAND:
402 controller_opts.band = OFPROTO_OUT_OF_BAND;
406 controller_opts.band = OFPROTO_IN_BAND;
410 sset_add(&s->netflow, optarg);
414 sset_add(&controllers, optarg);
418 sset_add(&s->snoops, optarg);
422 parse_ports(optarg, &s->ports);
426 s->unixctl_path = optarg;
429 case OPT_ENABLE_DUMMY:
437 OVS_PRINT_VERSION(OFP_VERSION, OFP_VERSION);
440 DAEMON_OPTION_HANDLERS
444 LEAK_CHECKER_OPTION_HANDLERS
447 STREAM_SSL_OPTION_HANDLERS
449 case OPT_BOOTSTRAP_CA_CERT:
450 stream_ssl_set_ca_cert_file(optarg, true);
466 VLOG_FATAL("need at least two non-option arguments; "
467 "use --help for usage");
471 if (controller_opts.rate_limit && controller_opts.rate_limit < 100) {
472 VLOG_WARN("Rate limit set to unusually low value %d",
473 controller_opts.rate_limit);
477 dp_parse_name(argv[0], &s->dp_name, &s->dp_type);
479 /* Figure out controller names. */
480 s->run_forever = false;
481 if (sset_is_empty(&controllers)) {
482 sset_add_and_free(&controllers, xasprintf("punix:%s/%s.mgmt",
483 ovs_rundir(), s->dp_name));
485 for (i = 1; i < argc; i++) {
486 if (!strcmp(argv[i], "none")) {
487 s->run_forever = true;
489 sset_add(&controllers, argv[i]);
493 /* Set up controllers. */
494 s->n_controllers = sset_count(&controllers);
495 s->controllers = xmalloc(s->n_controllers * sizeof *s->controllers);
497 SSET_FOR_EACH (name, &controllers) {
498 s->controllers[i] = controller_opts;
499 s->controllers[i].target = xstrdup(name);
502 sset_destroy(&controllers);
508 printf("%s: an OpenFlow switch implementation.\n"
509 "usage: %s [OPTIONS] [TYPE@]DATAPATH CONTROLLER...\n"
510 "where DATAPATH is a local datapath (e.g. \"dp0\")\n"
511 "optionally with an explicit TYPE (default: \"system\").\n"
512 "Each CONTROLLER is an active OpenFlow connection method.\n",
513 program_name, program_name);
514 vconn_usage(true, true, true);
515 printf("\nOpenFlow options:\n"
516 " -d, --datapath-id=ID Use ID as the OpenFlow switch ID\n"
517 " (ID must consist of 16 hex digits)\n"
518 " --mfr-desc=MFR Identify manufacturer as MFR\n"
519 " --hw-desc=HW Identify hardware as HW\n"
520 " --sw-desc=SW Identify software as SW\n"
521 " --serial-desc=SERIAL Identify serial number as SERIAL\n"
522 " --dp-desc=DP_DESC Identify dp description as DP_DESC\n"
523 "\nNetworking options:\n"
524 " --fail=open|closed when controller connection fails:\n"
525 " closed: drop all packets\n"
526 " open (default): act as learning switch\n"
527 " --inactivity-probe=SECS time between inactivity probes\n"
528 " --max-idle=SECS max idle for flows set up by switch\n"
529 " --max-backoff=SECS max time between controller connection\n"
530 " attempts (default: 8 seconds)\n"
531 " -l, --listen=METHOD allow management connections on METHOD\n"
532 " (a passive OpenFlow connection method)\n"
533 " --snoop=METHOD allow controller snooping on METHOD\n"
534 " (a passive OpenFlow connection method)\n"
535 " --out-of-band controller connection is out-of-band\n"
536 " --netflow=HOST:PORT configure NetFlow output target\n"
537 "\nRate-limiting of \"packet-in\" messages to the controller:\n"
538 " --rate-limit[=PACKETS] max rate, in packets/s (default: 1000)\n"
539 " --burst-limit=BURST limit on packet credit for idle time\n");
542 printf("\nOther options:\n"
543 " --unixctl=SOCKET override default control socket name\n"
544 " -h, --help display this help message\n"
545 " -V, --version display version information\n");
546 leak_checker_usage();