1 AT_BANNER([ofproto-dpif])
3 AT_SETUP([ofproto-dpif - resubmit])
5 AT_DATA([flows.txt], [dnl
6 table=0 in_port=1 priority=1000 icmp actions=output(10),resubmit(2),output(19),resubmit(3),output(21)
7 table=0 in_port=2 priority=1500 icmp actions=output(11),resubmit(,1),output(16),resubmit(2,1),output(18)
8 table=0 in_port=3 priority=2000 icmp actions=output(20)
9 table=1 in_port=1 priority=1000 icmp actions=output(12),resubmit(4,1),output(13),resubmit(3),output(15)
10 table=1 in_port=2 priority=1500 icmp actions=output(17),resubmit(,2)
11 table=1 in_port=3 priority=1500 icmp actions=output(14),resubmit(,2)
13 AT_CHECK([ovs-ofctl add-flows br0 flows.txt])
14 AT_CHECK([ovs-appctl -t test-openflowd ofproto/trace br0 'in_port(1),eth(src=50:54:00:00:00:05,dst=50:54:00:00:00:07),eth_type(0x0800),ipv4(src=192.168.0.1,dst=192.168.0.2,proto=1,tos=0),icmp(type=8,code=0)'], [0], [stdout])
15 AT_CHECK([tail -1 stdout], [0],
16 [Datapath actions: 10,11,12,13,14,15,16,17,18,19,20,21
21 AT_SETUP([ofproto-dpif - registers])
23 AT_DATA([flows.txt], [dnl
24 in_port=90 actions=resubmit:2,resubmit:3,resubmit:4,resubmit:91
25 in_port=91 actions=resubmit:5,resubmit:6,resubmit:7,resubmit:92
26 in_port=92 actions=resubmit:8,resubmit:9,resubmit:10,resubmit:11
27 in_port=2 actions=load:0x000db000->NXM_NX_REG0[[]]
28 in_port=3 actions=load:0xdea->NXM_NX_REG0[[20..31]]
29 in_port=4 actions=load:0xeef->NXM_NX_REG0[[0..11]]
30 in_port=5 actions=move:NXM_NX_REG0[[]]->NXM_NX_REG1[[]]
31 in_port=6 actions=load:0x22222222->NXM_NX_REG2[[]]
32 in_port=7 actions=move:NXM_NX_REG1[[20..31]]->NXM_NX_REG2[[0..11]]
33 in_port=8 actions=move:NXM_NX_REG1[[0..11]]->NXM_NX_REG2[[20..31]]
34 in_port=9,reg0=0xdeadbeef actions=output:20
35 in_port=10,reg1=0xdeadbeef actions=output:21
36 in_port=11,reg2=0xeef22dea actions=output:22
38 AT_CHECK([ovs-ofctl add-flows br0 flows.txt])
39 AT_CHECK([ovs-appctl -t test-openflowd ofproto/trace br0 'in_port(90),eth(src=50:54:00:00:00:05,dst=50:54:00:00:00:07),eth_type(0x0800),ipv4(src=192.168.0.1,dst=192.168.0.2,proto=1,tos=0),icmp(type=8,code=0)'], [0], [stdout])
40 AT_CHECK([tail -1 stdout], [0],
41 [Datapath actions: 20,21,22
46 AT_SETUP([ofproto-dpif - output])
48 AT_DATA([flows.txt], [dnl
49 in_port=1 actions=resubmit:2,resubmit:3,resubmit:4,resubmit:5,resubmit:6,resubmit:7
50 in_port=2 actions=output:9
51 in_port=3 actions=load:55->NXM_NX_REG0[[]],output:NXM_NX_REG0[[]],load:66->NXM_NX_REG1[[]]
52 in_port=4 actions=output:10,output:NXM_NX_REG0[[]],output:NXM_NX_REG1[[]],output:11
53 in_port=5 actions=load:77->NXM_NX_REG0[[0..15]],load:88->NXM_NX_REG0[[16..31]]
54 in_port=6 actions=output:NXM_NX_REG0[[0..15]],output:NXM_NX_REG0[[16..31]]
55 in_port=7 actions=load:0x110000ff->NXM_NX_REG0[[]],output:NXM_NX_REG0[[]]
57 AT_CHECK([ovs-ofctl add-flows br0 flows.txt])
58 AT_CHECK([ovs-appctl -t test-openflowd ofproto/trace br0 'in_port(1),eth(src=50:54:00:00:00:05,dst=50:54:00:00:00:07),eth_type(0x0800),ipv4(src=192.168.0.1,dst=192.168.0.2,proto=1,tos=0),icmp(type=8,code=0)'], [0], [stdout])
59 AT_CHECK([tail -1 stdout], [0],
60 [Datapath actions: 9,55,10,55,66,11,77,88
65 AT_SETUP([ofproto-dpif - set_tunnel])
67 AT_DATA([flows.txt], [dnl
68 in_port=90 actions=resubmit:1,resubmit:2,resubmit:3,resubmit:4,resubmit:5
69 in_port=1 actions=set_tunnel:1,output:1
70 in_port=2 actions=set_tunnel:1,output:2
71 in_port=3 actions=set_tunnel:2,set_tunnel:3,output:3
72 in_port=4 actions=set_tunnel:4,set_tunnel:3,output:4
73 in_port=5 actions=set_tunnel:5
75 AT_CHECK([ovs-ofctl add-flows br0 flows.txt])
76 AT_CHECK([ovs-appctl -t test-openflowd ofproto/trace br0 'tun_id(0x1),in_port(90),eth(src=50:54:00:00:00:05,dst=50:54:00:00:00:07),eth_type(0x0800),ipv4(src=192.168.0.1,dst=192.168.0.2,proto=1,tos=0),icmp(type=8,code=0)'], [0], [stdout])
77 AT_CHECK([tail -1 stdout], [0],
78 [Datapath actions: set_tunnel(0x1),1,2,set_tunnel(0x3),3,4
83 AT_SETUP([ofproto-dpif - VLAN handling])
85 [add-port br0 p1 trunks=10,12 -- \
86 add-port br0 p2 tag=10 -- \
87 add-port br0 p3 tag=12 -- \
88 add-port br0 p4 tag=12 -- \
89 add-port br0 p5 vlan_mode=native-tagged tag=10 -- \
90 add-port br0 p6 vlan_mode=native-tagged tag=10 trunks=10,12 -- \
91 add-port br0 p7 vlan_mode=native-untagged tag=12 -- \
92 add-port br0 p8 vlan_mode=native-untagged tag=12 trunks=10,12 -- \
93 set Interface p1 type=dummy -- \
94 set Interface p2 type=dummy -- \
95 set Interface p3 type=dummy -- \
96 set Interface p4 type=dummy -- \
97 set Interface p5 type=dummy -- \
98 set Interface p6 type=dummy -- \
99 set Interface p7 type=dummy -- \
100 set Interface p8 type=dummy --])
104 -- get Interface p1 ofport \
105 -- get Interface p2 ofport \
106 -- get Interface p3 ofport \
107 -- get Interface p4 ofport \
108 -- get Interface p5 ofport \
109 -- get Interface p6 ofport \
110 -- get Interface p7 ofport \
111 -- get Interface p8 ofport],
114 br0=0 p1=$1 p2=$2 p3=$3 p4=$4 p5=$5 p6=$6 p7=$7 p8=$8
116 dnl Each of these specifies an in_port, a VLAN VID (or "none"), a VLAN
117 dnl PCP (used if the VID isn't "none") and the expected set of datapath
120 dnl XXX Some of these actually output an 802.1Q header to an access port
121 dnl (see for example the actions for in_port=p3, vlan=0) to qualify the
122 dnl packet with a priority. That should be configurable.
127 "br0 10 0 p1,p5,p6,p7,p8,pop_vlan,p2" \
128 "br0 10 1 p1,p5,p6,p7,p8,pop_vlan,push_vlan(vid=0,pcp=1),p2" \
131 "br0 12 0 p1,p5,p6,pop_vlan,p3,p4,p7,p8" \
132 "br0 12 1 p1,p5,p6,pop_vlan,push_vlan(vid=0,pcp=1),p3,p4,p7,p8" \
136 "p1 10 0 br0,p5,p6,p7,p8,pop_vlan,p2" \
137 "p1 10 1 br0,p5,p6,p7,p8,pop_vlan,push_vlan(vid=0,pcp=1),p2" \
140 "p1 12 0 br0,p5,p6,pop_vlan,p3,p4,p7,p8" \
141 "p1 12 1 br0,p5,p6,pop_vlan,push_vlan(vid=0,pcp=1),p3,p4,p7,p8" \
142 "p2 none 0 push_vlan(vid=10,pcp=0),br0,p1,p5,p6,p7,p8" \
143 "p2 0 0 pop_vlan,push_vlan(vid=10,pcp=0),br0,p1,p5,p6,p7,p8" \
144 "p2 0 1 pop_vlan,push_vlan(vid=10,pcp=1),br0,p1,p5,p6,p7,p8" \
151 "p3 none 0 p4,p7,p8,push_vlan(vid=12,pcp=0),br0,p1,p5,p6" \
152 "p3 0 0 p4,p7,p8,pop_vlan,push_vlan(vid=12,pcp=0),br0,p1,p5,p6" \
153 "p3 0 1 p4,p7,p8,pop_vlan,push_vlan(vid=12,pcp=1),br0,p1,p5,p6" \
160 "p4 none 0 p3,p7,p8,push_vlan(vid=12,pcp=0),br0,p1,p5,p6" \
161 "p4 0 0 p3,p7,p8,pop_vlan,push_vlan(vid=12,pcp=0),br0,p1,p5,p6" \
162 "p4 0 1 p3,p7,p8,pop_vlan,push_vlan(vid=12,pcp=1),br0,p1,p5,p6" \
169 "p5 none 0 p2,push_vlan(vid=10,pcp=0),br0,p1,p6,p7,p8" \
170 "p5 0 0 p2,pop_vlan,push_vlan(vid=10,pcp=0),br0,p1,p6,p7,p8" \
171 "p5 0 1 p2,pop_vlan,push_vlan(vid=10,pcp=1),br0,p1,p6,p7,p8" \
172 "p5 10 0 br0,p1,p6,p7,p8,pop_vlan,p2" \
173 "p5 10 1 br0,p1,p6,p7,p8,pop_vlan,push_vlan(vid=0,pcp=1),p2" \
176 "p5 12 0 br0,p1,p6,pop_vlan,p3,p4,p7,p8" \
177 "p5 12 1 br0,p1,p6,pop_vlan,push_vlan(vid=0,pcp=1),p3,p4,p7,p8" \
178 "p6 none 0 p2,push_vlan(vid=10,pcp=0),br0,p1,p5,p7,p8" \
179 "p6 0 0 p2,pop_vlan,push_vlan(vid=10,pcp=0),br0,p1,p5,p7,p8" \
180 "p6 0 1 p2,pop_vlan,push_vlan(vid=10,pcp=1),br0,p1,p5,p7,p8" \
181 "p6 10 0 br0,p1,p5,p7,p8,pop_vlan,p2" \
182 "p6 10 1 br0,p1,p5,p7,p8,pop_vlan,push_vlan(vid=0,pcp=1),p2" \
185 "p6 12 0 br0,p1,p5,pop_vlan,p3,p4,p7,p8" \
186 "p6 12 1 br0,p1,p5,pop_vlan,push_vlan(vid=0,pcp=1),p3,p4,p7,p8" \
187 "p7 none 0 p3,p4,p8,push_vlan(vid=12,pcp=0),br0,p1,p5,p6" \
188 "p7 0 0 p3,p4,p8,pop_vlan,push_vlan(vid=12,pcp=0),br0,p1,p5,p6" \
189 "p7 0 1 p3,p4,p8,pop_vlan,push_vlan(vid=12,pcp=1),br0,p1,p5,p6" \
190 "p7 10 0 br0,p1,p5,p6,p8,pop_vlan,p2" \
191 "p7 10 1 br0,p1,p5,p6,p8,pop_vlan,push_vlan(vid=0,pcp=1),p2" \
194 "p7 12 0 br0,p1,p5,p6,pop_vlan,p3,p4,p8" \
195 "p7 12 1 br0,p1,p5,p6,pop_vlan,push_vlan(vid=0,pcp=1),p3,p4,p8" \
196 "p8 none 0 p3,p4,p7,push_vlan(vid=12,pcp=0),br0,p1,p5,p6" \
197 "p8 0 0 p3,p4,p7,pop_vlan,push_vlan(vid=12,pcp=0),br0,p1,p5,p6" \
198 "p8 0 1 p3,p4,p7,pop_vlan,push_vlan(vid=12,pcp=1),br0,p1,p5,p6" \
199 "p8 10 0 br0,p1,p5,p6,p7,pop_vlan,p2" \
200 "p8 10 1 br0,p1,p5,p6,p7,pop_vlan,push_vlan(vid=0,pcp=1),p2" \
203 "p8 12 0 br0,p1,p5,p6,pop_vlan,p3,p4,p7" \
204 "p8 12 1 br0,p1,p5,p6,pop_vlan,push_vlan(vid=0,pcp=1),p3,p4,p7"
212 eval n_in_port=\$$in_port
213 if test $vlan = none; then
214 flow="in_port($n_in_port),eth(src=50:54:00:00:00:01,dst=ff:ff:ff:ff:ff:ff),eth_type(0xabcd)"
216 flow="in_port($n_in_port),eth(src=50:54:00:00:00:01,dst=ff:ff:ff:ff:ff:ff),vlan(vid=$vlan,pcp=$pcp),eth_type(0xabcd)"
219 AT_CHECK([ovs-appctl ofproto/trace br0 "$flow"], [0], [stdout])
220 actual=`tail -1 stdout | sed 's/Datapath actions: //'`
222 AT_CHECK([echo "in_port=$in_port vlan=$vlan"
223 $PERL $srcdir/compare-odp-actions.pl "$expected" "$actual" br0=$br0 p1=$p1 p2=$p2 p3=$p3 p4=$p4 p5=$p5 p6=$p6 p7=$p7 p8=$p8], [0], [ignore])