1 # SOME DESCRIPTIVE TITLE.
2 # Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER
3 # This file is distributed under the same license as the PACKAGE package.
4 # FIRST AUTHOR <EMAIL@ADDRESS>, YEAR.
9 "Project-Id-Version: PACKAGE VERSION\n"
10 "Report-Msgid-Bugs-To: openvswitch@packages.debian.org\n"
11 "POT-Creation-Date: 2010-03-31 23:19-0700\n"
12 "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
13 "Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
14 "Language-Team: LANGUAGE <LL@li.org>\n"
16 "Content-Type: text/plain; charset=CHARSET\n"
17 "Content-Transfer-Encoding: 8bit\n"
21 #: ../openvswitch-switch-config.templates:1001
27 #: ../openvswitch-switch-config.templates:1002
28 msgid "Open vSwitch network devices:"
33 #: ../openvswitch-switch-config.templates:1002
35 "Choose the network devices that should become part of the Open vSwitch "
36 "instance. At least two devices must be selected for this machine to be a "
37 "useful switch. Unselecting all network devices will disable Open vSwitch "
43 #: ../openvswitch-switch-config.templates:1002
45 "The network devices that you select should not be configured with IP or IPv6 "
46 "addresses, even if the switch contacts the controller over one of the "
47 "selected network devices. This is because a running Open vSwitch takes over "
48 "network devices at a low level: they become part of the switch and cannot be "
49 "used for other purposes."
54 #: ../openvswitch-switch-config.templates:2001
55 msgid "No network devices were selected."
60 #: ../openvswitch-switch-config.templates:2001
62 "No network devices were selected for inclusion in the Open vSwitch "
63 "instance. The switch will be disabled."
68 #: ../openvswitch-switch-config.templates:3001
69 msgid "Some Network Devices Have IP or IPv6 Addresses"
74 #: ../openvswitch-switch-config.templates:3001
76 "The following network devices selected to be part of the Open vSwitch "
77 "instance have IP or IPv6 addresses configured:"
82 #: ../openvswitch-switch-config.templates:3001
83 msgid "${configured-netdevs}"
88 #: ../openvswitch-switch-config.templates:3001
90 "This is usually a mistake, even if the switch contacts the controller over "
91 "one of the selected network devices. This is because running Open vSwitch "
92 "takes over network devices at a low level: they become part of the switch "
93 "and cannot be used for other purposes."
98 #: ../openvswitch-switch-config.templates:3001
100 "If this is an unintentional mistake, move back and fix the selection, or de-"
101 "configure the IP or IPv6 from these network devices."
106 #: ../openvswitch-switch-config.templates:4001
107 msgid "discovery, in-band, out-of-band"
112 #: ../openvswitch-switch-config.templates:4002
113 msgid "Switch-to-controller access method:"
118 #: ../openvswitch-switch-config.templates:4002
120 "Open vSwitch must be able to contact the OpenFlow controller over the "
121 "network. It can do so in one of three ways:"
126 #: ../openvswitch-switch-config.templates:4002
128 "discovery: A single network is used for OpenFlow traffic and other data "
129 "traffic; that is, the switch contacts the controller over one of the network "
130 "devices selected as Open vSwitch network devices in the previous question. "
131 "The switch automatically determines the location of the controller using a "
132 "DHCP request with an OpenFlow-specific vendor option. This is the most "
138 #: ../openvswitch-switch-config.templates:4002
140 "in-band: As above, but the location of the controller is manually configured."
145 #: ../openvswitch-switch-config.templates:4002
147 "out-of-band: OpenFlow traffic uses a network separate from the data traffic "
148 "that it controls. If this is the case, the control network must already be "
149 "configured on a network device other than one of those selected as an Open "
150 "vSwitch netdev in the previous question."
155 #: ../openvswitch-switch-config.templates:5001
156 msgid "Preparing to discover controller"
161 #: ../openvswitch-switch-config.templates:5001
163 "The setup program will now attempt to discover the OpenFlow controller. "
164 "Controller discovery may take up to 30 seconds. Please be patient."
169 #: ../openvswitch-switch-config.templates:5001
171 "See ovs-openflowd(8) for instructions on how to configure a DHCP server for "
172 "controller discovery."
177 #: ../openvswitch-switch-config.templates:6001
178 msgid "Controller discovery failed."
183 #: ../openvswitch-switch-config.templates:6001
184 msgid "The controller's location could not be determined automatically."
189 #: ../openvswitch-switch-config.templates:6001
191 "Ensure that the OpenFlow DHCP server is properly configured. See ovs-"
192 "openflowd(8) for instructions on how to configure a DHCP server for "
193 "controller discovery."
198 #: ../openvswitch-switch-config.templates:7001
199 msgid "Use discovered settings?"
204 #: ../openvswitch-switch-config.templates:7001
205 msgid "Controller discovery obtained the following settings:"
210 #: ../openvswitch-switch-config.templates:7001
211 msgid "Controller location: ${controller-vconn}"
216 #: ../openvswitch-switch-config.templates:7001
217 msgid "PKI URL: ${pki-uri}"
222 #: ../openvswitch-switch-config.templates:7001
223 msgid "Please verify that these settings are correct."
228 #: ../openvswitch-switch-config.templates:8001
229 msgid "Switch IP address:"
234 #: ../openvswitch-switch-config.templates:8001
236 "For in-band communication with the controller, the Open vSwitch instance "
237 "must be able to determine its own IP address. Its IP address may be "
238 "configured statically or dynamically."
243 #: ../openvswitch-switch-config.templates:8001
244 msgid "For static configuration, specify the switch's IP address as a string."
249 #: ../openvswitch-switch-config.templates:8001
251 "For dynamic configuration with DHCP (the most common case), specify \"dhcp"
252 "\". Configuration with DHCP will only work reliably if the network topology "
253 "allows the switch to contact the DHCP server before it connects to the "
254 "OpenFlow controller."
259 #: ../openvswitch-switch-config.templates:9001
260 msgid "The switch IP address is invalid."
265 #: ../openvswitch-switch-config.templates:9001
267 "The switch IP address must specified as \"dhcp\" or a valid IP address in "
268 "dotted-octet form (e.g. \"1.2.3.4\")."
273 #: ../openvswitch-switch-config.templates:10001
274 msgid "Controller location:"
279 #: ../openvswitch-switch-config.templates:10001
281 "Specify how Open vSwitch should connect to the OpenFlow controller. The "
282 "value should be in form \"ssl:IP[:PORT]\" to connect to the controller over "
283 "SSL (recommended for security) or \"tcp:IP[:PORT]\" to connect over "
289 #: ../openvswitch-switch-config.templates:11001
290 msgid "The controller location is invalid."
295 #: ../openvswitch-switch-config.templates:11001
297 "The controller location must be specifed as \"ssl:IP[:PORT]\" to connect to "
298 "the controller over SSL (recommended for security) or \"tcp:IP[:PORT]\" to "
299 "connect over cleartext TCP."
304 #: ../openvswitch-switch-config.templates:12001
305 msgid "Open vSwitch PKI server host name or URL:"
310 #: ../openvswitch-switch-config.templates:12001
312 "Specify a URL to the Open vSwitch public key infrastructure (PKI). If a "
313 "host name or IP address is specified in place of a URL, then http://<host>/"
314 "openvswitch/pki/ will be used, where <host> is the specified host name or IP "
320 #: ../openvswitch-switch-config.templates:12001
322 "The Open vSwitch PKI is usually on the same machine as the OpenFlow "
328 #: ../openvswitch-switch-config.templates:12001
330 "The setup process will connect to the Open vSwitch PKI server over HTTP, "
331 "using the system's configured default HTTP proxy (if any)."
336 #: ../openvswitch-switch-config.templates:13001
337 msgid "The switch CA certificate could not be retrieved."
342 #: ../openvswitch-switch-config.templates:13001
343 msgid "Retrieval of ${url} failed, with the following status: \"${error}\"."
348 #: ../openvswitch-switch-config.templates:13001
350 "Ensure that the Open vSwitch PKI server is correctly configured and "
351 "available at ${pki-uri}. If the system is configured to use an HTTP proxy, "
352 "also make sure that the HTTP proxy is available and that the PKI server can "
353 "be reached through it."
358 #: ../openvswitch-switch-config.templates:14001
359 msgid "Is ${fingerprint} the controller CA's fingerprint?"
364 #: ../openvswitch-switch-config.templates:14001
366 "If a man-in-the-middle attack is possible in your network environment, check "
367 "that the controller CA's fingerprint is really ${fingerprint}. Answer \"true"
368 "\" if it matches, \"false\" if there is a discrepancy."
373 #: ../openvswitch-switch-config.templates:14001
375 "If a man-in-the-middle attack is not a concern, there is no need to verify "
376 "the fingerprint. Simply answer \"true\"."
381 #: ../openvswitch-switch-config.templates:15001
382 msgid "Send certificate request to switch CA?"
387 #: ../openvswitch-switch-config.templates:15001
389 "Before it can connect to the controller over SSL, the Open vSwitch's key "
390 "must be signed by the switch certificate authority (CA) located on the Open "
391 "vSwitch PKI server, which is usually collocated with the OpenFlow "
392 "controller. A signing request can be sent to the PKI server now."
397 #: ../openvswitch-switch-config.templates:15001
399 "Answer \"true\" to send a signing request to the switch CA now. This is "
400 "ordinarily the correct choice. There is no harm in sending a given signing "
401 "request more than once."
406 #: ../openvswitch-switch-config.templates:15001
408 "Answer \"false\" to skip sending a signing request to the switch CA. Unless "
409 "the request has already been sent to the switch CA, manual sending of the "
410 "request and signing will be necessary."
415 #: ../openvswitch-switch-config.templates:16001
416 msgid "The certificate request could not be sent."
421 #: ../openvswitch-switch-config.templates:16001
422 msgid "Posting to ${url} failed, with the following status: \"${error}\"."
427 #: ../openvswitch-switch-config.templates:16001
429 "Ensure that the Open vSwitch PKI server is correctly configured and "
430 "available at ${pki-uri}."
435 #: ../openvswitch-switch-config.templates:17001
436 msgid "Fetch signed switch certificate from PKI server?"
441 #: ../openvswitch-switch-config.templates:17001
443 "Before it can connect to the controller over SSL, the Open vSwitch's key "
444 "must be signed by the switch certificate authority (CA) located on the Open "
445 "vSwitch PKI server, which is usually collocated with the OpenFlow "
451 #: ../openvswitch-switch-config.templates:17001
453 "At this point, a signing request has been sent to the switch CA (or sending "
454 "a request has been manually skipped), but the signed certificate has not yet "
455 "been retrieved. Manual action may need to be taken at the PKI server to "
456 "approve the signing request."
461 #: ../openvswitch-switch-config.templates:17001
463 "Answer \"true\" to attempt to retrieve the signed switch certificate from "
464 "the switch CA. If the switch certificate request has been signed at the PKI "
465 "server, this is the correct choice."
470 #: ../openvswitch-switch-config.templates:17001
472 "Answer \"false\" to postpone switch configuration. The configuration "
473 "process must be restarted later, when the switch certificate request has "
479 #: ../openvswitch-switch-config.templates:18001
480 msgid "Signed switch certificate could not be retrieved."
485 #: ../openvswitch-switch-config.templates:18001
487 "The signed switch certificate could not be retrieved from the switch CA: "
488 "retrieval of ${url} failed, with the following status: \"${error}\"."
493 #: ../openvswitch-switch-config.templates:18001
495 "This probably indicates that the switch's certificate request has not yet "
496 "been signed. If this is the problem, it may be fixed by signing the "
497 "certificate request at ${pki-uri}, then trying to fetch the signed switch "
503 #: ../openvswitch-switch-config.templates:19001
504 msgid "Open vSwitch Setup Finished"
509 #: ../openvswitch-switch-config.templates:19001
511 "Setup of this Open vSwitch instance is finished. Complete the setup "
512 "procedure to enable the switch."