Add OXM_OF_* definitions

[openvswitch] / debian / changelog

openvswitch (1.6.90-1) unstable; urgency=low
  [ Open vSwitch team ]
  * New upstream version
    - Nothing yet!  Try NEWS...

 -- Open vSwitch team <dev@openvswitch.org>  Fri, 24 Feb 2012 11:12:52 +0900

openvswitch (1.6.0-1) unstable; urgency=low
  [ Open vSwitch team ]
  * New upstream version
    - bonding
        - LACP bonds no longer fall back to balance-slb when negotiations fail.
          Instead they drop traffic.
        - The default bond_mode changed from SLB to active-backup, to protect
          unsuspecting users from the significant risks of SLB bonds (which are
          documented in vswitchd/INTERNALS).
        - Load balancing can be disabled by setting the bond-rebalance-interval
          to zero.
    - OpenFlow:
        - Added support for bitwise matching on TCP and UDP ports.
          See ovs-ofctl(8) for more information.
        - NXM flow dumps now include times elapsed toward idle and hard
          timeouts.
        - Added an OpenFlow extension NXT_SET_ASYNC_CONFIG that allows
          controllers more precise control over which OpenFlow messages they
          receive asynchronously.
        - New "fin_timeout" action.
        - Added "fin_timeout" support to "learn" action.
    - The default MAC learning timeout has been increased from 60 seconds
      to 300 seconds.  The MAC learning timeout is now configurable.
    - When QoS settings for an interface do not configure a default queue
      (queue 0), Open vSwitch now uses a default configuration for that
      queue, instead of dropping all packets as in previous versions.
    - Logging to console and file will have UTC timestamp as a default for all
      the daemons. An example of the default format is 2012-01-27T16:35:17Z.
      ovs-appctl can be used to change the default format as before.
    - New support for limiting the number of flows in an OpenFlow flow
      table, with configurable policy for evicting flows upon
      overflow.  See the Flow_Table table in ovs-vswitch.conf.db(5)
      for more information.
    - New "enable-async-messages" column in the Controller table.  If set to
      false, OpenFlow connections to the controller will initially have all
      asynchronous messages disabled, overriding normal OpenFlow behavior.
    - ofproto-provider interface:
        - "struct rule" has a new member "used" that ofproto implementations
          should maintain by updating with ofproto_rule_update_used().
    - ovsdb-client:
        - The new option --timestamp causes the "monitor" command to print
          a timestamp with every update.
    - CFM module CCM broadcasts can now be tagged with an 802.1p priority.

 -- Open vSwitch team <dev@openvswitch.org>  Fri, 24 Feb 2012 11:12:48 +0900

openvswitch (1.5.0-1) unstable; urgency=low
  [ Open vSwitch team ]
  * New upstream version
    - OpenFlow:
        - Added support for querying, modifying, and deleting flows
          based on flow cookie when using NXM.
        - Added new NXM_PACKET_IN format.
    - ovs-ofctl:
        - Added daemonization support to the monitor and snoop commands.
    - ovs-vsctl:
        - The "find" command supports new set relational operators
          {=}, {!=}, {<}, {>}, {<=}, and {>=}.
    - ovsdb-tool now uses the typical database and schema installation
      directories as defaults.

 -- Open vSwitch team <dev@openvswitch.org>  Wed, 15 Feb 2012 11:12:48 +0900

openvswitch (1.4.0-2) unstable; urgency=low

  * Use explicit DKMS variable for kernel source directory
    - 0001-debian-Fix-dependencies-for-openvswitch-datapath-dkm.patch
    - 0002-debian-Look-in-lib-modules-instead-of-usr-src-for-DK.patch
    - 0001-debian-Use-provided-kernel-source-dir.patch
    - 0001-debian-Do-not-run-make-if-configure-fails-during-DKM.patch
    - (closes: #659685)
  * Don't install Python modules for obsolete Python versions
    - 0001-debian-Don-t-install-Python-modules-for-obsolete-Pyt.patch

 -- Simon Horman <horms@debian.org>  Tue, 14 Feb 2012 11:43:13 +0900

openvswitch (1.4.0-1) unstable; urgency=low
  [ Open vSwitch team ]
  * New upstream version
    - Compatible with Open vSwitch kernel module included in Linux 3.3.
    - New "VLAN splinters" feature to work around buggy device drivers
      in old Linux versions.  (This feature is deprecated.  When
      broken device drivers are no longer in widespread use, we will
      delete this feature.)  See ovs-vswitchd.conf.db(5) for more
      information.
    - OpenFlow:
       - Added ability to match on IPv6 flow label through NXM.
       - Added ability to match on ECN bits in IPv4 and IPv6 through NXM.
       - Added ability to match on TTL in IPv4 and IPv6 through NXM.
       - Added ability to modify ECN bits in IPv4.
       - Added ability to modify TTL in IPv4.
    - ovs-vswitchd:
       - Don't require the "normal" action to use mirrors.  Traffic will
         now be properly mirrored for any flows, regardless of their
         actions.
       - Track packet and byte statistics sent on mirrors.
    - ovs-appctl:
      - New "fdb/flush" command to flush bridge's MAC learning table.
    - ovs-test:
      - A new distributed testing tool that allows one to diagnose performance
        and connectivity issues. This tool currently is not included in RH or
        Xen packages.
    - RHEL packaging now supports integration with Red Hat network scripts.
    - Debian: Depend on python (>= 2.7) | python-argparse instead of
              python-argparse to avoid pulling in python2.6
              (closes: #653645)

 -- Open vSwitch team <dev@openvswitch.org>  Mon, 30 Jan 2012 23:36:00 +0000

openvswitch (1.3.0-1) unstable; urgency=low
  [ Open vSwitch team ]
  * New upstream version
    - OpenFlow:
      - Added an OpenFlow extension which allows the "output" action to accept
        NXM fields.
      - Added an OpenFlow extension for flexible learning.
      - Bumped number of NXM registers from four to five.
    - ovs-appctl:
      - New "version" command to determine version of running daemon.
      - If no argument is provided for "cfm/show", displays detailed
        information about all interfaces with CFM enabled.
      - If no argument is provided for "lacp/show", displays detailed
        information about all ports with LACP enabled.
    - ovs-vswitchd:
      - The software switch now supports 255 OpenFlow tables, instead
        of just one.  By default, only table 0 is consulted, but the
        new NXAST_RESUBMIT_TABLE action can look up in additional
        tables.  Tables 128 and above are reserved for use by the
        switch itself; please use only tables 0 through 127.
      - Add support for 802.1D spanning tree (STP).
    - Fragment handling extensions:
      - New OFPC_FRAG_NX_MATCH fragment handling mode, in which L4
        fields are made available for matching in fragments with
        offset 0.
      - New NXM_NX_IP_FRAG match field for matching IP fragments (usable
        via "ip_frag" in ovs-ofctl).
      - New ovs-ofctl "get-frags" and "set-frags" commands to get and set
        fragment handling policy.
    - CAPWAP tunneling now supports an extension to transport a 64-key.  By
      default it remains compatible with the old version and other
      standards-based implementations.
    - Flow setups are now processed in a round-robin manner across ports
      to prevent any single client from monopolizing the CPU and conducting
      a denial of service attack.
    - Added support for native VLAN tagging.  A new "vlan_mode"
      parameter can be set for "port". Possible values: "access",
      "trunk", "native-tagged" and "native-untagged".
    - test-openflowd has been removed.  Please use ovs-vswitchd instead.

 -- Open vSwitch team <dev@openvswitch.org>  Mon, 09 Dec 2011 23:36:00 +0000

openvswitch (1.2.0-1) unstable; urgency=low

  [ Open vSwitch team ]
  * New upstream version
    - New "ofproto" abstraction layer to ease porting to hardware
      switching ASICs.
    - Packaging for Red Hat Enterprise Linux 5.6 and 6.0.
    - Datapath support for Linux kernels up to 3.0.
    - OpenFlow:
      - New "bundle" and "bundle_load" action extensions.
    - Database:
      - Implement table unique constraints.
      - Support cooperative locking between callers.
    - ovs-dpctl:
      - New "-s" option for "show" command prints packet and byte
        counters for each port.
    - ovs-ofctl:
      - New "--readd" option for "replace-flows".
    - ovs-vsctl:
      - New "show" command to print an overview of configuration.
      - New "comment" command to add remark that explains intentions.
    - ovs-brcompatd has been rewritten to fix long-standing bugs.
    - ovs-openflowd has been renamed test-openflowd and moved into the
      tests directory.  Its presence confused too many users.  Please
      use ovs-vswitchd instead.
    - New ovs-benchmark utility to test flow setup performance.
    - A new log level "off" has been added.  Configuring a log facility
      "off" prevents any messages from being logged to it.  Previously,
      "emer" was effectively "off" because no messages were ever logged at
      level "emer".  Now, errors that cause a process to exit are logged
      at "emer" level.
    - "configure" option --with-l26 has been renamed --with-linux, and
      --with-l26-source has been renamed --with-linux-source.  The old
      names will be removed after the next release, so please update
      your scripts.
    - The "-2.6" suffix has been dropped from the datapath/linux-2.6 and
      datapath/linux-2.6/compat-2.6 directories.
    - Feature removals:
      - Dropped support for "tun_id_from_cookie" OpenFlow extension.
        Please use the extensible match extensions instead.
      - Removed the Maintenance_Point and Monitor tables in an effort
        to simplify 802.1ag configuration.
    - Performance and scalability improvements
    - Bug fixes

 -- Open vSwitch team <dev@openvswitch.org>  Wed, 03 Aug 2011 14:43:00 +0000

openvswitch (1.1.1-1) unstable; urgency=low

  [ Open vSwitch team ]
  * Bug fixes.

  [ Simon Horman ]
  * docs: Suppress warning marcro DD not defined
    (upstream commit 58f870d0)
  * debian: Make openvswitch depend on Python
    (upstream commit aa41cb61)
  * debian: Don't begin openvswitch-pki description with article.
    (upstream commit bc6bb66)
  * Debian: Add ${misc:Depends} dependency to python-openvswitch
  * Debian: Update standards version from 3.9.1 to 3.9.2
  * Debian: ${source:Version} dependency on python openvswitch
  * Debian: ${source:Version} dependency for python openvswitch
  * Switch to dpkg-source 3.0 (quilt) format
    - For local non-debian/ patches (above)

 -- Simon Horman <horms@debian.org>  Wed, 15 Jun 2011 10:46:15 +0900
    
openvswitch (1.1.0-1) unstable; urgency=low

  [ Open vSwitch team ]
  * New upstream version
    - Ability to define policies over IPv6
    - LACP
    - 802.1ag CCM
    - Support for extensible match extensions to OpenFlow
    - QoS:
      - Support for HFSC qdisc.
      - Queue used by in-band control can now be configured.
    - Kernel:
      - Kernel<->userspace interface has been reworked and should be
        close to a stable ABI now.
      - "Port group" concept has been dropped.
    - GRE over IPSEC tunnels
    - Bonding:
      - New active backup bonding mode.
      - New L4 hashing support when LACP is enabled.
      - Source MAC hash now includes VLAN field also.
      - miimon support.
    - Greatly improved handling of large flow tables
    - ovs-dpctl:
      - "show" command now prints full vport configuration.
      - "dump-groups" command removed since kernel support for
        port groups was dropped.
    - ovs-vsctl:
      - New commands for working with the new Managers table.
      - "list" command enhanced with new formatting options and --columns
        option.
      - "get" command now accepts new --id option.
      - New "find" command.
    - ovs-ofctl:
      - New "queue-stats" command for printing queue stats.
      - New commands "replace-flows" and "diff-flows".
      - Commands to add and remove flows can now read from files.
      - New --flow-format option to enable or disable NXM.
      - New --more option to increase OpenFlow message verbosity.
      - Removed "tun-cookie" command, which is no longer useful.
    - ovs-controller enhancements for testing various features.
    - New ovs-vlan-test command for testing for Linux kernel driver VLAN
      bugs.  New ovs-vlan-bug-workaround command for enabling and
      disabling a workaround for these driver bugs.
    - OpenFlow support:
      - "Resubmit" actions now update flow statistics. 
      - New "register" extension for use in matching and actions, via NXM.
      - New "multipath" experimental action extension.
      - New support for matching multicast Ethernet frames, via NXM.
      - New extension for OpenFlow vendor error codes.
      - New extension to set the QoS output queue without actually
        sending to an output port.
      - Open vSwitch now reports a single flow table, instead of
        separate hash and wildcard tables.  This better models the
        current implementation.
      - New experimental "note" action.
      - New "ofproto/trace" ovs-appctl command and associated utilities
        to ease debugging complex flow tables.
    - Database:
      - Schema documentation now includes an entity-relationship diagram.
      - The database is now garbage collected.  In most tables,
        unreferenced rows will be deleted automatically.
      - Many tables now include statistics updated periodically by
        ovs-vswitchd or ovsdb-server.
      - Every table now has an "external-ids" column for use by OVS
        integrators.
      - There is no default controller anymore.  Each bridge must have its
        controller individually specified.
      - The "fail-mode" is now a property of a Bridge instead of a Controller.
      - New versioning and checksum features.
      - New Managers table and manager_options column in Open_vSwitch table
        for specifying managers.  The old "managers" column in the
        Open_vSwitch table has been removed.
      - Many "name" columns are now immutable.
    - Feature removals:
      - Dropped support for XenServer pre-5.6.100.
      - Dropped support for Linux pre-2.6.18.
      - Dropped controller discovery support.
      - Dropped "ovs-ofctl status" and the OpenFlow extension that it used.
        Statistics reporting in the database is a rough equivalent.
      - Dropped the "corekeeper" package (now separate, at
        http://openvswitch.org/cgi-bin/gitweb.cgi?p=corekeeper).
    - Performance and scalability improvements
    - Bug fixes

  [ Simon Horman ]
  * Add the following fixes from upstream branch-1.1
    - 7f1aca9 dpif-linux: Avoid logging error on ENOENT in
              dpif_linux_is_internal_device().
    - 8996f83 dpif-linux: Avoid segfault on netdev_get_stats() without kernel
              module.
    - 002d4a3 vswitch: Improve schema documentation.
    - 58bd294 cfm: Fix broken fault logic.
    - c042664 bridge: Run once before configuring CFM.
   * Switch to dpkg-source 3.0 (quilt) format

 -- Simon Horman <horms@debian.org>  Wed, 27 Apr 2011 17:11:10 +0900

openvswitch (1.1.0~pre2.g2.ea763e0e-1) unstable; urgency=low

  * Git snapshot, including
    - tests: Fix Y2011 bug in testsuite
      (closes: #609506)

 -- Simon Horman <horms@debian.org>  Wed, 12 Jan 2011 08:34:35 +0900

openvswitch (1.1.0~pre2.g1.bbe8d06e-1) unstable; urgency=low

  * Git snaptshot

 -- Simon Horman <horms@debian.org>  Thu, 06 Jan 2011 11:11:55 +0900

openvswitch (1.1.0~pre2-5) unstable; urgency=low

  * Open vSwitch only works on Linux so set
    the Architecture of binary packages to linux-any accordingly

 -- Simon Horman <horms@debian.org>  Tue, 23 Nov 2010 07:55:19 +0900

openvswitch (1.1.0~pre2-4) unstable; urgency=low

  * Add procps to Build-Depends
    (closes: #602891)

 -- Simon Horman <horms@debian.org>  Tue, 16 Nov 2010 06:46:17 +0900

openvswitch (1.1.0~pre2-3) unstable; urgency=low

  * Remove the corekeeper package as it isn't strongly related
    to Open vSwitch. It has subsequently been broken off into
    a separate source repository and may be uploaded as its
    own debian source package.
    http://openvswitch.org/cgi-bin/gitweb.cgi?p=corekeeper;a=summary
    (closes: #602946)
  * Avoid the use of long socket names.
    (closes: #602891, closes: #602911)

 -- Simon Horman <horms@debian.org>  Thu, 11 Nov 2010 06:35:05 +0900

openvswitch (1.1.0~pre2-2) unstable; urgency=low

  * Clarify licensing of files in xenserver/

 -- Simon Horman <horms@debian.org>  Thu, 23 Sep 2010 10:56:18 +0900

openvswitch (1.1.0~pre2-1) unstable; urgency=low

  * New upstream version
    - Bug fixes

 -- Simon Horman <horms@debian.org>  Wed, 15 Sep 2010 18:28:59 +0900

openvswitch (1.1.0~pre1-1) unstable; urgency=low

  * New upstream version
    - OpenFlow 1.0 slicing (QoS) functionality
    - Python bindings for configuration database (no write support)
    - Performance and scalability improvements
    - Bug fixes

 -- Open vSwitch team <dev@openvswitch.org>  Tue, 31 Aug 2010 23:20:00 +0000

openvswitch (1.0.1-1) unstable; urgency=low

  * New upstream version.

 -- Open vSwitch team <dev@openvswitch.org>  Mon, 17 May 2010 10:36:00 +0000