1 openvswitch (1.9.90-1) unstable; urgency=low
4 - Nothing yet! Try NEWS...
6 -- Open vSwitch team <dev@openvswitch.org> Wed, 24 Oct 2012 16:12:57 -0700
8 openvswitch (1.9.0-1) unstable; urgency=low
10 * New upstream version
11 - The tunneling code no longer assumes input and output keys are symmetric.
12 If they are not, PMTUD needs to be disabled for tunneling to work. Note
13 this only applies to flow-based keys.
14 - FreeBSD is now a supported platform, thanks to code contributions from
15 Gaetano Catalli, Ed Maste, and Giuseppe Lettieri.
16 - ovs-bugtool: New --ovs option to report only OVS related information.
17 - New %t and %T log escapes to identify the subprogram within a
18 cooperating group of processes or threads that emitted a log message.
19 The default log patterns now include this information.
21 - Allow bitwise masking for SHA and THA fields in ARP, SLL and TLL
22 fields in IPv6 neighbor discovery messages, and IPv6 flow label.
23 - Adds support for writing to the metadata field for a flow.
25 - Commands and actions that accept port numbers now also accept keywords
26 that represent those ports (such as LOCAL, NONE, and ALL). This is
27 also the recommended way to specify these ports, for compatibility
28 with OpenFlow 1.1 and later (which use the OpenFlow 1.0 numbers
29 for these ports for different purposes).
31 - Support requesting the port number with the "port_no" option in
33 - ovs-pki: The "online PKI" features have been removed, along with
34 the ovs-pki-cgi program that facilitated it, because of some
35 alarmist insecurity claims. We do not believe that these claims
36 are true, but because we do not know of any users for this
37 feature it seems better on balance to remove it. (The ovs-pki-cgi
38 program was not included in distribution packaging.)
39 - ovsdb-server now enforces the immutability of immutable columns. This
40 was not enforced in earlier versions due to an oversight.
41 - New support for a nonstandard form of GRE that supports a 64-bit key.
42 - The following features are now deprecated. They will be removed no
43 earlier than February 2013. Please email dev@openvswitch.org with
46 - The autopath action.
47 - Interface type "null".
48 - Numeric values for reserved ports (see "ovs-ofctl" note above).
50 -- Open vSwitch team <dev@openvswitch.org> Wed, 24 Oct 2012 16:10:39 -0700
52 openvswitch (1.8.0-1) unstable; urgency=low
54 * New upstream version
55 - New FAQ. Please send updates and additions!
56 - Authors of controllers, please read the new section titled "Action
57 Reproduction" in DESIGN, which describes an Open vSwitch change in
58 behavior in corner cases that may affect some controllers.
60 - A new test utility that can create L3 tunnel between two Open
61 vSwitches and detect connectivity issues.
63 - New --sort and --rsort options for "dump-flows" command.
64 - "mod-port" command can now control all OpenFlow config flags.
66 - Allow general bitwise masking for IPv4 and IPv6 addresses in
67 IPv4, IPv6, and ARP packets. (Previously, only CIDR masks
69 - Allow support for arbitrary Ethernet masks. (Previously, only
70 the multicast bit in the destination address could be individually
72 - New field OXM_OF_METADATA, to align with OpenFlow 1.1.
73 - The OFPST_QUEUE request now reports an error if a specified port or
74 queue does not exist, or for requests for a specific queue on all
75 ports, if the specified queue does not exist on any port. (Previous
76 versions generally reported an empty set of results.)
77 - New "flow monitor" feature to allow controllers to be notified of
78 flow table changes as they happen.
79 - Additional protocols are not mirrored and dropped when forward-bpdu is
80 false. For a full list, see the ovs-vswitchd.conf.db man page.
81 - Open vSwitch now sends RARP packets in situations where it previously
82 sent a custom protocol, making it consistent with behavior of QEMU and
84 - All Open vSwitch programs and log files now show timestamps in UTC,
85 instead the local timezone, by default.
87 -- Open vSwitch team <dev@openvswitch.org> Mon, 16 Jul 2012 16:44:52 +0900
89 openvswitch (1.7.0-1) unstable; urgency=low
91 * New upstream version
92 - kernel modules are renamed. openvswitch_mod.ko is now
93 openvswitch.ko and brcompat_mod.ko is now brcompat.ko.
94 - Increased the number of NXM registers to 8.
95 - Added ability to configure dscp setting for manager and controller
96 connections. By default, these connections have a DSCP value of
97 Internetwork Control (0xc0).
98 - Added the granular link health statistics, 'cfm_health', to an
101 - Added support to mask nd_target for ICMPv6 neighbor discovery flows.
102 - Added support for OpenFlow 1.3 port description (OFPMP_PORT_DESC)
105 - Added the "dump-ports-desc" command to retrieve port
106 information using the new port description multipart messages.
108 - Added support for spawning ovs-test server from the client.
109 - Now ovs-test is able to automatically create test bridges and ports.
110 - "ovs-dpctl dump-flows" now prints observed TCP flags in TCP flows.
111 - Tripled flow setup performance.
112 - The "coverage/log" command previously available through ovs-appctl
113 has been replaced by "coverage/show". The new command replies with
114 coverage counter values, instead of logging them.
116 -- Open vSwitch team <dev@openvswitch.org> Mon, 30 Jul 2012 17:23:57 +0900
118 openvswitch (1.6.1-1) unstable; urgency=low
119 [ Open vSwitch team ]
120 * New upstream version
121 - Allow OFPP_CONTROLLER as the in_port for packet-out messages.
123 -- Open vSwitch team <dev@openvswitch.org> Mon, 25 Jun 2012 13:52:17 +0900
125 openvswitch (1.6.0-1) unstable; urgency=low
126 [ Open vSwitch team ]
127 * New upstream version
129 - LACP bonds no longer fall back to balance-slb when negotiations fail.
130 Instead they drop traffic.
131 - The default bond_mode changed from SLB to active-backup, to protect
132 unsuspecting users from the significant risks of SLB bonds (which are
133 documented in vswitchd/INTERNALS).
134 - Load balancing can be disabled by setting the bond-rebalance-interval
137 - Added support for bitwise matching on TCP and UDP ports.
138 See ovs-ofctl(8) for more information.
139 - NXM flow dumps now include times elapsed toward idle and hard
141 - Added an OpenFlow extension NXT_SET_ASYNC_CONFIG that allows
142 controllers more precise control over which OpenFlow messages they
143 receive asynchronously.
144 - New "fin_timeout" action.
145 - Added "fin_timeout" support to "learn" action.
146 - The default MAC learning timeout has been increased from 60 seconds
147 to 300 seconds. The MAC learning timeout is now configurable.
148 - When QoS settings for an interface do not configure a default queue
149 (queue 0), Open vSwitch now uses a default configuration for that
150 queue, instead of dropping all packets as in previous versions.
151 - Logging to console and file will have UTC timestamp as a default for all
152 the daemons. An example of the default format is 2012-01-27T16:35:17Z.
153 ovs-appctl can be used to change the default format as before.
154 - New support for limiting the number of flows in an OpenFlow flow
155 table, with configurable policy for evicting flows upon
156 overflow. See the Flow_Table table in ovs-vswitch.conf.db(5)
157 for more information.
158 - New "enable-async-messages" column in the Controller table. If set to
159 false, OpenFlow connections to the controller will initially have all
160 asynchronous messages disabled, overriding normal OpenFlow behavior.
161 - ofproto-provider interface:
162 - "struct rule" has a new member "used" that ofproto implementations
163 should maintain by updating with ofproto_rule_update_used().
165 - The new option --timestamp causes the "monitor" command to print
166 a timestamp with every update.
167 - CFM module CCM broadcasts can now be tagged with an 802.1p priority.
169 -- Open vSwitch team <dev@openvswitch.org> Fri, 24 Feb 2012 11:12:48 +0900
171 openvswitch (1.5.0-1) unstable; urgency=low
172 [ Open vSwitch team ]
173 * New upstream version
175 - Added support for querying, modifying, and deleting flows
176 based on flow cookie when using NXM.
177 - Added new NXM_PACKET_IN format.
179 - Added daemonization support to the monitor and snoop commands.
181 - The "find" command supports new set relational operators
182 {=}, {!=}, {<}, {>}, {<=}, and {>=}.
183 - ovsdb-tool now uses the typical database and schema installation
184 directories as defaults.
186 -- Open vSwitch team <dev@openvswitch.org> Fri, 01 June 2012 13:06:00 +0900
188 openvswitch (1.4.0+git20120426-1) unstable; urgency=low
190 * New upstream release fixing the following bugs:
191 o Broken log rotation.
192 o Use-after-free error when ports disappear.
193 o Minor memory leaks.
194 o Testsuite failures on big-endian architectures.
196 -- Ben Pfaff <pfaffben@debian.org> Thu, 26 Apr 2012 13:46:55 -0700
198 openvswitch (1.4.0+git20120321-1) unstable; urgency=low
200 * New upstream version including:
202 - ovs-vsctl: Allow "fake bridges" to be created for VLAN 0.
203 - vswitchd: Make the MAC entry aging time configurable.
204 - mac-learning: Increase MAC learning timeout to 300 seconds.
206 - netdev-linux: Fix use-after-free when netdev_dump_queues() deletes
208 - netlink-socket: Increase Netlink socket receive buffer size.
209 - ofproto: Fix code that keeps track of MTU.
210 - ovs-monitor-ipsec: Detect correctly IPSEC configuration changes
211 - bond: Incorrectly reported an error in appctl.
212 - socket-util: Unlink Unix domain sockets that bind but fail to connect.
213 - bridge: Remove unwanted ports at time of ofproto creation.
214 - dpif-linux: Make dpif_linux_port_query_by_name() query only one
216 - ofproto-dpif: Cleanup STP on ports when disabled on their bridge.
217 - configure: Try to extract kernel source directory from build Makefile.
218 - vswitchd: Always configure a default queue for QoS.
219 - ofproto-dpif: Don't output to in_port even if in_port is OFPP_LOCAL.
220 - sflow_agent: Use snprintf() in place of sprintf().
222 - Move PKI directory to FHS-compliant location. Closes: #661090.
223 Thanks to Andreas Beckmann <debian@abeckmann.de> for reporting
225 - Use a different way to avoid failing install without kernel module.
226 - Avoid unit test failure when doing "unofficial" builds.
227 - Bump standards-version to 3.9.3.
228 - Remove some useless files from the dkms package.
229 - Clean .pyc files in "clean" target.
230 - Remove po-debconf build dependency.
231 - Build-depend on python-all to pull in all Python versions.
232 - Add missing ${python:Depends} to openvswitch-test package.
233 - Improve long descriptions so as to better describe the packages.
234 - Bump debhelper compat level to 8 and make build-depends consistent.
235 - Fix exit status of openvswitch-switch init script "status" command.
236 - Use provided kernel source dir instead of host kernel version.
237 - Do not run "make" if "configure" fails during DKMS build.
238 - Look in /lib/modules instead of /usr/src for DKMS kernel sources.
239 - Fix dependencies for openvswitch-datapath-dkms package.
240 - Don't install Python modules for obsolete Python versions.
241 - Add dependency on ${misc:Depends} to openvswitch-test
242 o Documentation improvements:
243 - ovsdb-doc: Use minus sign in negative numbers in nroff output.
244 - ovsdb-doc: Convert '-' preceding a number as a minus sign, not a
246 - ovsdb-doc: Put NAME section into generated manpage.
247 - Fix typo in manpage.
248 - vswitchd: Document behavior of 802.1p priorities with VLAN splinters.
249 - netdev: Fix typo in error message.
250 - INSTALL.Linux: minor typo
252 * Many thanks to Thomas Goirand <zigo@debian.org> for contributing many
253 of the packaging fixes listed above.
255 * This version fixes most of the lintian errors described in bug
256 #663051, but a few remain, so this upload does not close that bug. I
257 believe that this upload should be suitable for downgrading that bug's
260 -- Ben Pfaff <pfaffben@debian.org> Wed, 21 Mar 2012 10:00:28 -0700
262 openvswitch (1.4.0-2+nmu1) unstable; urgency=low
264 * Non maintainer upload.
265 * Removes all patches in debian/patches, because they are patching stuff
266 inconditionally in debian/*, and this should be applied by default.
267 * Uses the correct ${kernel_source_dir} in debian/dkms.conf.in, so that
268 the kernel module builds as expected (Closes: #659685).
270 -- Thomas Goirand <zigo@debian.org> Thu, 08 Mar 2012 08:46:24 +0000
272 openvswitch (1.4.0-2) unstable; urgency=low
274 * Use explicit DKMS variable for kernel source directory
275 - 0001-debian-Fix-dependencies-for-openvswitch-datapath-dkm.patch
276 - 0002-debian-Look-in-lib-modules-instead-of-usr-src-for-DK.patch
277 - 0001-debian-Use-provided-kernel-source-dir.patch
278 - 0001-debian-Do-not-run-make-if-configure-fails-during-DKM.patch
280 * Don't install Python modules for obsolete Python versions
281 - 0001-debian-Don-t-install-Python-modules-for-obsolete-Pyt.patch
283 -- Simon Horman <horms@debian.org> Tue, 14 Feb 2012 11:43:13 +0900
285 openvswitch (1.4.0-1) unstable; urgency=low
286 [ Open vSwitch team ]
287 * New upstream version
288 - Compatible with Open vSwitch kernel module included in Linux 3.3.
289 - New "VLAN splinters" feature to work around buggy device drivers
290 in old Linux versions. (This feature is deprecated. When
291 broken device drivers are no longer in widespread use, we will
292 delete this feature.) See ovs-vswitchd.conf.db(5) for more
295 - Added ability to match on IPv6 flow label through NXM.
296 - Added ability to match on ECN bits in IPv4 and IPv6 through NXM.
297 - Added ability to match on TTL in IPv4 and IPv6 through NXM.
298 - Added ability to modify ECN bits in IPv4.
299 - Added ability to modify TTL in IPv4.
301 - Don't require the "normal" action to use mirrors. Traffic will
302 now be properly mirrored for any flows, regardless of their
304 - Track packet and byte statistics sent on mirrors.
306 - New "fdb/flush" command to flush bridge's MAC learning table.
308 - A new distributed testing tool that allows one to diagnose performance
309 and connectivity issues. This tool currently is not included in RH or
311 - RHEL packaging now supports integration with Red Hat network scripts.
312 - Debian: Depend on python (>= 2.7) | python-argparse instead of
313 python-argparse to avoid pulling in python2.6
316 -- Open vSwitch team <dev@openvswitch.org> Mon, 30 Jan 2012 23:36:00 +0000
318 openvswitch (1.3.0-1) unstable; urgency=low
319 [ Open vSwitch team ]
320 * New upstream version
322 - Added an OpenFlow extension which allows the "output" action to accept
324 - Added an OpenFlow extension for flexible learning.
325 - Bumped number of NXM registers from four to five.
327 - New "version" command to determine version of running daemon.
328 - If no argument is provided for "cfm/show", displays detailed
329 information about all interfaces with CFM enabled.
330 - If no argument is provided for "lacp/show", displays detailed
331 information about all ports with LACP enabled.
333 - The software switch now supports 255 OpenFlow tables, instead
334 of just one. By default, only table 0 is consulted, but the
335 new NXAST_RESUBMIT_TABLE action can look up in additional
336 tables. Tables 128 and above are reserved for use by the
337 switch itself; please use only tables 0 through 127.
338 - Add support for 802.1D spanning tree (STP).
339 - Fragment handling extensions:
340 - New OFPC_FRAG_NX_MATCH fragment handling mode, in which L4
341 fields are made available for matching in fragments with
343 - New NXM_NX_IP_FRAG match field for matching IP fragments (usable
344 via "ip_frag" in ovs-ofctl).
345 - New ovs-ofctl "get-frags" and "set-frags" commands to get and set
346 fragment handling policy.
347 - CAPWAP tunneling now supports an extension to transport a 64-key. By
348 default it remains compatible with the old version and other
349 standards-based implementations.
350 - Flow setups are now processed in a round-robin manner across ports
351 to prevent any single client from monopolizing the CPU and conducting
352 a denial of service attack.
353 - Added support for native VLAN tagging. A new "vlan_mode"
354 parameter can be set for "port". Possible values: "access",
355 "trunk", "native-tagged" and "native-untagged".
356 - test-openflowd has been removed. Please use ovs-vswitchd instead.
358 -- Open vSwitch team <dev@openvswitch.org> Mon, 09 Dec 2011 23:36:00 +0000
360 openvswitch (1.2.0-1) unstable; urgency=low
362 [ Open vSwitch team ]
363 * New upstream version
364 - New "ofproto" abstraction layer to ease porting to hardware
366 - Packaging for Red Hat Enterprise Linux 5.6 and 6.0.
367 - Datapath support for Linux kernels up to 3.0.
369 - New "bundle" and "bundle_load" action extensions.
371 - Implement table unique constraints.
372 - Support cooperative locking between callers.
374 - New "-s" option for "show" command prints packet and byte
375 counters for each port.
377 - New "--readd" option for "replace-flows".
379 - New "show" command to print an overview of configuration.
380 - New "comment" command to add remark that explains intentions.
381 - ovs-brcompatd has been rewritten to fix long-standing bugs.
382 - ovs-openflowd has been renamed test-openflowd and moved into the
383 tests directory. Its presence confused too many users. Please
384 use ovs-vswitchd instead.
385 - New ovs-benchmark utility to test flow setup performance.
386 - A new log level "off" has been added. Configuring a log facility
387 "off" prevents any messages from being logged to it. Previously,
388 "emer" was effectively "off" because no messages were ever logged at
389 level "emer". Now, errors that cause a process to exit are logged
391 - "configure" option --with-l26 has been renamed --with-linux, and
392 --with-l26-source has been renamed --with-linux-source. The old
393 names will be removed after the next release, so please update
395 - The "-2.6" suffix has been dropped from the datapath/linux-2.6 and
396 datapath/linux-2.6/compat-2.6 directories.
398 - Dropped support for "tun_id_from_cookie" OpenFlow extension.
399 Please use the extensible match extensions instead.
400 - Removed the Maintenance_Point and Monitor tables in an effort
401 to simplify 802.1ag configuration.
402 - Performance and scalability improvements
405 -- Open vSwitch team <dev@openvswitch.org> Wed, 03 Aug 2011 14:43:00 +0000
407 openvswitch (1.1.1-1) unstable; urgency=low
409 [ Open vSwitch team ]
413 * docs: Suppress warning marcro DD not defined
414 (upstream commit 58f870d0)
415 * debian: Make openvswitch depend on Python
416 (upstream commit aa41cb61)
417 * debian: Don't begin openvswitch-pki description with article.
418 (upstream commit bc6bb66)
419 * Debian: Add ${misc:Depends} dependency to python-openvswitch
420 * Debian: Update standards version from 3.9.1 to 3.9.2
421 * Debian: ${source:Version} dependency on python openvswitch
422 * Debian: ${source:Version} dependency for python openvswitch
423 * Switch to dpkg-source 3.0 (quilt) format
424 - For local non-debian/ patches (above)
426 -- Simon Horman <horms@debian.org> Wed, 15 Jun 2011 10:46:15 +0900
428 openvswitch (1.1.0-1) unstable; urgency=low
430 [ Open vSwitch team ]
431 * New upstream version
432 - Ability to define policies over IPv6
435 - Support for extensible match extensions to OpenFlow
437 - Support for HFSC qdisc.
438 - Queue used by in-band control can now be configured.
440 - Kernel<->userspace interface has been reworked and should be
441 close to a stable ABI now.
442 - "Port group" concept has been dropped.
443 - GRE over IPSEC tunnels
445 - New active backup bonding mode.
446 - New L4 hashing support when LACP is enabled.
447 - Source MAC hash now includes VLAN field also.
449 - Greatly improved handling of large flow tables
451 - "show" command now prints full vport configuration.
452 - "dump-groups" command removed since kernel support for
453 port groups was dropped.
455 - New commands for working with the new Managers table.
456 - "list" command enhanced with new formatting options and --columns
458 - "get" command now accepts new --id option.
459 - New "find" command.
461 - New "queue-stats" command for printing queue stats.
462 - New commands "replace-flows" and "diff-flows".
463 - Commands to add and remove flows can now read from files.
464 - New --flow-format option to enable or disable NXM.
465 - New --more option to increase OpenFlow message verbosity.
466 - Removed "tun-cookie" command, which is no longer useful.
467 - ovs-controller enhancements for testing various features.
468 - New ovs-vlan-test command for testing for Linux kernel driver VLAN
469 bugs. New ovs-vlan-bug-workaround command for enabling and
470 disabling a workaround for these driver bugs.
472 - "Resubmit" actions now update flow statistics.
473 - New "register" extension for use in matching and actions, via NXM.
474 - New "multipath" experimental action extension.
475 - New support for matching multicast Ethernet frames, via NXM.
476 - New extension for OpenFlow vendor error codes.
477 - New extension to set the QoS output queue without actually
478 sending to an output port.
479 - Open vSwitch now reports a single flow table, instead of
480 separate hash and wildcard tables. This better models the
481 current implementation.
482 - New experimental "note" action.
483 - New "ofproto/trace" ovs-appctl command and associated utilities
484 to ease debugging complex flow tables.
486 - Schema documentation now includes an entity-relationship diagram.
487 - The database is now garbage collected. In most tables,
488 unreferenced rows will be deleted automatically.
489 - Many tables now include statistics updated periodically by
490 ovs-vswitchd or ovsdb-server.
491 - Every table now has an "external-ids" column for use by OVS
493 - There is no default controller anymore. Each bridge must have its
494 controller individually specified.
495 - The "fail-mode" is now a property of a Bridge instead of a Controller.
496 - New versioning and checksum features.
497 - New Managers table and manager_options column in Open_vSwitch table
498 for specifying managers. The old "managers" column in the
499 Open_vSwitch table has been removed.
500 - Many "name" columns are now immutable.
502 - Dropped support for XenServer pre-5.6.100.
503 - Dropped support for Linux pre-2.6.18.
504 - Dropped controller discovery support.
505 - Dropped "ovs-ofctl status" and the OpenFlow extension that it used.
506 Statistics reporting in the database is a rough equivalent.
507 - Dropped the "corekeeper" package (now separate, at
508 http://openvswitch.org/cgi-bin/gitweb.cgi?p=corekeeper).
509 - Performance and scalability improvements
513 * Add the following fixes from upstream branch-1.1
514 - 7f1aca9 dpif-linux: Avoid logging error on ENOENT in
515 dpif_linux_is_internal_device().
516 - 8996f83 dpif-linux: Avoid segfault on netdev_get_stats() without kernel
518 - 002d4a3 vswitch: Improve schema documentation.
519 - 58bd294 cfm: Fix broken fault logic.
520 - c042664 bridge: Run once before configuring CFM.
521 * Switch to dpkg-source 3.0 (quilt) format
523 -- Simon Horman <horms@debian.org> Wed, 27 Apr 2011 17:11:10 +0900
525 openvswitch (1.1.0~pre2.g2.ea763e0e-1) unstable; urgency=low
527 * Git snapshot, including
528 - tests: Fix Y2011 bug in testsuite
531 -- Simon Horman <horms@debian.org> Wed, 12 Jan 2011 08:34:35 +0900
533 openvswitch (1.1.0~pre2.g1.bbe8d06e-1) unstable; urgency=low
537 -- Simon Horman <horms@debian.org> Thu, 06 Jan 2011 11:11:55 +0900
539 openvswitch (1.1.0~pre2-5) unstable; urgency=low
541 * Open vSwitch only works on Linux so set
542 the Architecture of binary packages to linux-any accordingly
544 -- Simon Horman <horms@debian.org> Tue, 23 Nov 2010 07:55:19 +0900
546 openvswitch (1.1.0~pre2-4) unstable; urgency=low
548 * Add procps to Build-Depends
551 -- Simon Horman <horms@debian.org> Tue, 16 Nov 2010 06:46:17 +0900
553 openvswitch (1.1.0~pre2-3) unstable; urgency=low
555 * Remove the corekeeper package as it isn't strongly related
556 to Open vSwitch. It has subsequently been broken off into
557 a separate source repository and may be uploaded as its
558 own debian source package.
559 http://openvswitch.org/cgi-bin/gitweb.cgi?p=corekeeper;a=summary
561 * Avoid the use of long socket names.
562 (closes: #602891, closes: #602911)
564 -- Simon Horman <horms@debian.org> Thu, 11 Nov 2010 06:35:05 +0900
566 openvswitch (1.1.0~pre2-2) unstable; urgency=low
568 * Clarify licensing of files in xenserver/
570 -- Simon Horman <horms@debian.org> Thu, 23 Sep 2010 10:56:18 +0900
572 openvswitch (1.1.0~pre2-1) unstable; urgency=low
574 * New upstream version
577 -- Simon Horman <horms@debian.org> Wed, 15 Sep 2010 18:28:59 +0900
579 openvswitch (1.1.0~pre1-1) unstable; urgency=low
581 * New upstream version
582 - OpenFlow 1.0 slicing (QoS) functionality
583 - Python bindings for configuration database (no write support)
584 - Performance and scalability improvements
587 -- Open vSwitch team <dev@openvswitch.org> Tue, 31 Aug 2010 23:20:00 +0000
589 openvswitch (1.0.1-1) unstable; urgency=low
591 * New upstream version.
593 -- Open vSwitch team <dev@openvswitch.org> Mon, 17 May 2010 10:36:00 +0000