2 ------------------------
4 - New "fdb/flush" command to flush bridge's MAC learning table.
8 ------------------------
10 - Added an OpenFlow extension which allows the "output" action to accept
12 - Added an OpenFlow extension for flexible learning.
13 - Bumped number of NXM registers from four to five.
15 - New "version" command to determine version of running daemon.
16 - If no argument is provided for "cfm/show", displays detailed
17 information about all interfaces with CFM enabled.
18 - If no argument is provided for "lacp/show", displays detailed
19 information about all ports with LACP enabled.
21 - New "set-if" command to modify a datapath port's configuration.
23 - The software switch now supports 255 OpenFlow tables, instead
24 of just one. By default, only table 0 is consulted, but the
25 new NXAST_RESUBMIT_TABLE action can look up in additional
26 tables. Tables 128 and above are reserved for use by the
27 switch itself; please use only tables 0 through 127.
28 - Add support for 802.1D spanning tree (STP).
29 - Fragment handling extensions:
30 - New OFPC_FRAG_NX_MATCH fragment handling mode, in which L4
31 fields are made available for matching in fragments with
33 - New NXM_NX_IP_FRAG match field for matching IP fragments (usable
34 via "ip_frag" in ovs-ofctl).
35 - New ovs-ofctl "get-frags" and "set-frags" commands to get and set
36 fragment handling policy.
37 - CAPWAP tunneling now supports an extension to transport a 64-key. By
38 default it remains compatible with the old version and other
39 standards-based implementations.
40 - Flow setups are now processed in a round-robin manner across ports
41 to prevent any single client from monopolizing the CPU and conducting
42 a denial of service attack.
43 - Added support for native VLAN tagging. A new "vlan_mode"
44 parameter can be set for "port". Possible values: "access",
45 "trunk", "native-tagged" and "native-untagged".
46 - test-openflowd has been removed. Please use ovs-vswitchd instead.
49 ------------------------
50 - New "ofproto" abstraction layer to ease porting to hardware
52 - Packaging for Red Hat Enterprise Linux 5.6 and 6.0.
53 - Datapath support for Linux kernels up to 3.0.
55 - New "bundle" and "bundle_load" action extensions.
57 - Implement table unique constraints.
58 - Support cooperative locking between callers.
60 - New "-s" option for "show" command prints packet and byte
61 counters for each port.
63 - New "--readd" option for "replace-flows".
65 - New "show" command to print an overview of configuration.
66 - New "comment" command to add remark that explains intentions.
67 - ovs-brcompatd has been rewritten to fix long-standing bugs.
68 - ovs-openflowd has been renamed test-openflowd and moved into the
69 tests directory. Its presence confused too many users. Please
70 use ovs-vswitchd instead.
71 - New ovs-benchmark utility to test flow setup performance.
72 - A new log level "off" has been added. Configuring a log facility
73 "off" prevents any messages from being logged to it. Previously,
74 "emer" was effectively "off" because no messages were ever logged at
75 level "emer". Now, errors that cause a process to exit are logged
77 - "configure" option --with-l26 has been renamed --with-linux, and
78 --with-l26-source has been renamed --with-linux-source. The old
79 names will be removed after the next release, so please update
81 - The "-2.6" suffix has been dropped from the datapath/linux-2.6 and
82 datapath/linux-2.6/compat-2.6 directories.
84 - Dropped support for "tun_id_from_cookie" OpenFlow extension.
85 Please use the extensible match extensions instead.
86 - Removed the Maintenance_Point and Monitor tables in an effort
87 to simplify 802.1ag configuration.
88 - Performance and scalability improvements
92 ------------------------
93 - Ability to define policies over IPv6
96 - Support for extensible match extensions to OpenFlow
98 - Support for HFSC qdisc.
99 - Queue used by in-band control can now be configured.
101 - Kernel<->userspace interface has been reworked and should be
102 close to a stable ABI now.
103 - "Port group" concept has been dropped.
104 - GRE over IPSEC tunnels
106 - New active backup bonding mode.
107 - New L4 hashing support when LACP is enabled.
108 - Source MAC hash now includes VLAN field also.
110 - Greatly improved handling of large flow tables
112 - "show" command now prints full vport configuration.
113 - "dump-groups" command removed since kernel support for
114 port groups was dropped.
116 - New commands for working with the new Managers table.
117 - "list" command enhanced with new formatting options and --columns
119 - "get" command now accepts new --id option.
120 - New "find" command.
122 - New "queue-stats" command for printing queue stats.
123 - New commands "replace-flows" and "diff-flows".
124 - Commands to add and remove flows can now read from files.
125 - New --flow-format option to enable or disable NXM.
126 - New --more option to increase OpenFlow message verbosity.
127 - Removed "tun-cookie" command, which is no longer useful.
128 - ovs-controller enhancements for testing various features.
129 - New ovs-vlan-test command for testing for Linux kernel driver VLAN
130 bugs. New ovs-vlan-bug-workaround command for enabling and
131 disabling a workaround for these driver bugs.
133 - "Resubmit" actions now update flow statistics.
134 - New "register" extension for use in matching and actions, via NXM.
135 - New "multipath" experimental action extension.
136 - New support for matching multicast Ethernet frames, via NXM.
137 - New extension for OpenFlow vendor error codes.
138 - New extension to set the QoS output queue without actually
139 sending to an output port.
140 - Open vSwitch now reports a single flow table, instead of
141 separate hash and wildcard tables. This better models the
142 current implementation.
143 - New experimental "note" action.
144 - New "ofproto/trace" ovs-appctl command and associated utilities
145 to ease debugging complex flow tables.
147 - Schema documentation now includes an entity-relationship diagram.
148 - The database is now garbage collected. In most tables,
149 unreferenced rows will be deleted automatically.
150 - Many tables now include statistics updated periodically by
151 ovs-vswitchd or ovsdb-server.
152 - Every table now has an "external-ids" column for use by OVS
154 - There is no default controller anymore. Each bridge must have its
155 controller individually specified.
156 - The "fail-mode" is now a property of a Bridge instead of a Controller.
157 - New versioning and checksum features.
158 - New Managers table and manager_options column in Open_vSwitch table
159 for specifying managers. The old "managers" column in the
160 Open_vSwitch table has been removed.
161 - Many "name" columns are now immutable.
163 - Dropped support for XenServer pre-5.6.100.
164 - Dropped support for Linux pre-2.6.18.
165 - Dropped controller discovery support.
166 - Dropped "ovs-ofctl status" and the OpenFlow extension that it used.
167 Statistics reporting in the database is a rough equivalent.
168 - Dropped the "corekeeper" package (now separate, at
169 http://openvswitch.org/cgi-bin/gitweb.cgi?p=corekeeper).
170 - Performance and scalability improvements
173 v1.1.0pre2 - 13 Sep 2010
174 ------------------------
177 v1.1.0pre1 - 31 Aug 2010
178 ------------------------
179 - OpenFlow 1.0 slicing (QoS) functionality
180 - Python bindings for configuration database (no write support)
181 - Performance and scalability improvements
186 - New "patch" interface type
191 - Configuration database with remote management
194 - Support for XenServer 5.5 and 5.6
195 - Performance and scalability improvements
198 v0.99.2 - 18 Feb 2010
199 ---------------------
202 v0.99.1 - 25 Jan 2010
203 ---------------------
204 - Add support for sFlow(R)
205 - Make headers compatible with C++
208 v0.99.0 - 14 Jan 2010
209 ---------------------
210 - User-space forwarding engine
213 v0.90.7 - 29 Nov 2009
214 ---------------------
215 - Add support for NetFlow active timeouts
222 v0.90.5 - 21 Sep 2009
223 ---------------------
224 - Generalize in-band control to more diverse network setups