2 ------------------------
4 - Added ability to match on IPv6 flow label through NXM.
5 - Added ability to match on ECN bits in IPv4 and IPv6 through NXM.
6 - Added ability to match on TTL in IPv4 and IPv6 through NXM.
7 - Added ability to modify ECN bits in IPv4.
8 - Added ability to modify TTL in IPv4.
10 - New "fdb/flush" command to flush bridge's MAC learning table.
13 ------------------------
15 - Added an OpenFlow extension which allows the "output" action to accept
17 - Added an OpenFlow extension for flexible learning.
18 - Bumped number of NXM registers from four to five.
20 - New "version" command to determine version of running daemon.
21 - If no argument is provided for "cfm/show", displays detailed
22 information about all interfaces with CFM enabled.
23 - If no argument is provided for "lacp/show", displays detailed
24 information about all ports with LACP enabled.
26 - New "set-if" command to modify a datapath port's configuration.
28 - The software switch now supports 255 OpenFlow tables, instead
29 of just one. By default, only table 0 is consulted, but the
30 new NXAST_RESUBMIT_TABLE action can look up in additional
31 tables. Tables 128 and above are reserved for use by the
32 switch itself; please use only tables 0 through 127.
33 - Add support for 802.1D spanning tree (STP).
34 - Fragment handling extensions:
35 - New OFPC_FRAG_NX_MATCH fragment handling mode, in which L4
36 fields are made available for matching in fragments with
38 - New NXM_NX_IP_FRAG match field for matching IP fragments (usable
39 via "ip_frag" in ovs-ofctl).
40 - New ovs-ofctl "get-frags" and "set-frags" commands to get and set
41 fragment handling policy.
42 - CAPWAP tunneling now supports an extension to transport a 64-key. By
43 default it remains compatible with the old version and other
44 standards-based implementations.
45 - Flow setups are now processed in a round-robin manner across ports
46 to prevent any single client from monopolizing the CPU and conducting
47 a denial of service attack.
48 - Added support for native VLAN tagging. A new "vlan_mode"
49 parameter can be set for "port". Possible values: "access",
50 "trunk", "native-tagged" and "native-untagged".
51 - test-openflowd has been removed. Please use ovs-vswitchd instead.
54 ------------------------
55 - New "ofproto" abstraction layer to ease porting to hardware
57 - Packaging for Red Hat Enterprise Linux 5.6 and 6.0.
58 - Datapath support for Linux kernels up to 3.0.
60 - New "bundle" and "bundle_load" action extensions.
62 - Implement table unique constraints.
63 - Support cooperative locking between callers.
65 - New "-s" option for "show" command prints packet and byte
66 counters for each port.
68 - New "--readd" option for "replace-flows".
70 - New "show" command to print an overview of configuration.
71 - New "comment" command to add remark that explains intentions.
72 - ovs-brcompatd has been rewritten to fix long-standing bugs.
73 - ovs-openflowd has been renamed test-openflowd and moved into the
74 tests directory. Its presence confused too many users. Please
75 use ovs-vswitchd instead.
76 - New ovs-benchmark utility to test flow setup performance.
77 - A new log level "off" has been added. Configuring a log facility
78 "off" prevents any messages from being logged to it. Previously,
79 "emer" was effectively "off" because no messages were ever logged at
80 level "emer". Now, errors that cause a process to exit are logged
82 - "configure" option --with-l26 has been renamed --with-linux, and
83 --with-l26-source has been renamed --with-linux-source. The old
84 names will be removed after the next release, so please update
86 - The "-2.6" suffix has been dropped from the datapath/linux-2.6 and
87 datapath/linux-2.6/compat-2.6 directories.
89 - Dropped support for "tun_id_from_cookie" OpenFlow extension.
90 Please use the extensible match extensions instead.
91 - Removed the Maintenance_Point and Monitor tables in an effort
92 to simplify 802.1ag configuration.
93 - Performance and scalability improvements
97 ------------------------
98 - Ability to define policies over IPv6
101 - Support for extensible match extensions to OpenFlow
103 - Support for HFSC qdisc.
104 - Queue used by in-band control can now be configured.
106 - Kernel<->userspace interface has been reworked and should be
107 close to a stable ABI now.
108 - "Port group" concept has been dropped.
109 - GRE over IPSEC tunnels
111 - New active backup bonding mode.
112 - New L4 hashing support when LACP is enabled.
113 - Source MAC hash now includes VLAN field also.
115 - Greatly improved handling of large flow tables
117 - "show" command now prints full vport configuration.
118 - "dump-groups" command removed since kernel support for
119 port groups was dropped.
121 - New commands for working with the new Managers table.
122 - "list" command enhanced with new formatting options and --columns
124 - "get" command now accepts new --id option.
125 - New "find" command.
127 - New "queue-stats" command for printing queue stats.
128 - New commands "replace-flows" and "diff-flows".
129 - Commands to add and remove flows can now read from files.
130 - New --flow-format option to enable or disable NXM.
131 - New --more option to increase OpenFlow message verbosity.
132 - Removed "tun-cookie" command, which is no longer useful.
133 - ovs-controller enhancements for testing various features.
134 - New ovs-vlan-test command for testing for Linux kernel driver VLAN
135 bugs. New ovs-vlan-bug-workaround command for enabling and
136 disabling a workaround for these driver bugs.
138 - "Resubmit" actions now update flow statistics.
139 - New "register" extension for use in matching and actions, via NXM.
140 - New "multipath" experimental action extension.
141 - New support for matching multicast Ethernet frames, via NXM.
142 - New extension for OpenFlow vendor error codes.
143 - New extension to set the QoS output queue without actually
144 sending to an output port.
145 - Open vSwitch now reports a single flow table, instead of
146 separate hash and wildcard tables. This better models the
147 current implementation.
148 - New experimental "note" action.
149 - New "ofproto/trace" ovs-appctl command and associated utilities
150 to ease debugging complex flow tables.
152 - Schema documentation now includes an entity-relationship diagram.
153 - The database is now garbage collected. In most tables,
154 unreferenced rows will be deleted automatically.
155 - Many tables now include statistics updated periodically by
156 ovs-vswitchd or ovsdb-server.
157 - Every table now has an "external-ids" column for use by OVS
159 - There is no default controller anymore. Each bridge must have its
160 controller individually specified.
161 - The "fail-mode" is now a property of a Bridge instead of a Controller.
162 - New versioning and checksum features.
163 - New Managers table and manager_options column in Open_vSwitch table
164 for specifying managers. The old "managers" column in the
165 Open_vSwitch table has been removed.
166 - Many "name" columns are now immutable.
168 - Dropped support for XenServer pre-5.6.100.
169 - Dropped support for Linux pre-2.6.18.
170 - Dropped controller discovery support.
171 - Dropped "ovs-ofctl status" and the OpenFlow extension that it used.
172 Statistics reporting in the database is a rough equivalent.
173 - Dropped the "corekeeper" package (now separate, at
174 http://openvswitch.org/cgi-bin/gitweb.cgi?p=corekeeper).
175 - Performance and scalability improvements
178 v1.1.0pre2 - 13 Sep 2010
179 ------------------------
182 v1.1.0pre1 - 31 Aug 2010
183 ------------------------
184 - OpenFlow 1.0 slicing (QoS) functionality
185 - Python bindings for configuration database (no write support)
186 - Performance and scalability improvements
191 - New "patch" interface type
196 - Configuration database with remote management
199 - Support for XenServer 5.5 and 5.6
200 - Performance and scalability improvements
203 v0.99.2 - 18 Feb 2010
204 ---------------------
207 v0.99.1 - 25 Jan 2010
208 ---------------------
209 - Add support for sFlow(R)
210 - Make headers compatible with C++
213 v0.99.0 - 14 Jan 2010
214 ---------------------
215 - User-space forwarding engine
218 v0.90.7 - 29 Nov 2009
219 ---------------------
220 - Add support for NetFlow active timeouts
227 v0.90.5 - 21 Sep 2009
228 ---------------------
229 - Generalize in-band control to more diverse network setups