PSPP NEWS -- history of user-visible changes.
-Time-stamp: <2007-11-04 08:01:18 blp>
-Copyright (C) 1996-9, 2000 Free Software Foundation, Inc.
+Time-stamp: <2010-10-16 13:05:30 blp>
+Copyright (C) 1996-9, 2000, 2008, 2009, 2010 Free Software Foundation, Inc.
See the end for copying conditions.
Please send PSPP bug reports to bug-gnu-pspp@gnu.org.
-Changes since 0.4.3:
+Changes from 0.7.3 to 0.7.6:
+
+ * NPAR TESTS now supports the /KRUSKAL-WALLIS subcommand.
+
+ * AUTORECODE now supports the /GROUP subcommand.
+
+ * The MRSETS command is now implemented.
+
+ * SAVE TRANSLATE is now implemented, with initial support for saving
+ data in comma-separated value and tab-delimited formats.
+
+ * The PRESERVE and RESTORE commands are now implemented.
+
+ * The HOST command has been updated to use more modern syntax.
+
+Changes from 0.7.2 to 0.7.3:
+
+ * Charts are now produced with Cairo and Pango, instead of libplot.
+ Without them, the new graphing features will not work. If you do
+ not have Cairo and Pango installed, you must run `configure' with
+ --without-cairo.
+
+ * The new "cairo" output driver supports output in PostScript, PDF,
+ and SVG formats. Its functionality is a superset of that of the
+ "postscript" driver, which has been removed. You must have Cairo
+ and Pango installed to build the "cairo" driver.
+
+Changes from 0.7.1 to 0.7.2:
+
+ * Updated Perl module interface.
+
+ * Value labels for long string variables are now supported.
+
+ * Missing values for long string variables are now supported.
+
+Changes from 0.7.0 to 0.7.1:
+
+ * Added a perl module to facilitate reading and writing of pspp system
+ files from perl programs.
+
+Changes from 0.6.2-pre6 to 0.7.0:
+
+ * Custom variable and data file attributes are now supported.
+ Commands VARIABLE ATTRIBUTE and DATAFILE ATTRIBUTE have been added
+ for setting and clear attributes. Support for attributes has also
+ been added to commands that read and write system files, such as
+ SAVE and GET, as well as to the DISPLAY command.
+
+ * Numererous improvements to the Graphical User Interface have
+ made. Notable improvements include:
+
+ - Non-Ascii characters in strings, labels and variable names are
+ now supported.
+
+ - A "Split Window" function is available, which makes it easier to
+ see different parts of a large data file.
+
+ - Data files can now be opened by specifing their name as the first
+ argument. This means that on a properly configured desktop, double
+ clicking on an icon will open the file.
+
+
+ * New statistical procedures:
+ - CORRELATIONS
+ - ROC
+ - RELIABILITY
+
+ NPAR TESTS now supports the WILCOXON and SIGN subcommands.
+
+ The CROSSTABS command has been completely re-implemented to fix numerous bugs.
+
+ * Three new commands to combine data files have been added: MATCH FILES,
+ UPDATE and ADD FILES.
+
+ * A tutorial chapter has been added to the user manual.
+
+Changes from 0.6.1 to 0.6.2
+
+ * New translations:
+
+ - Dutch, thanks to Harry Thijssen.
+
+ - Brazilian Portuguese, thanks to Michel Boaventura.
+
+ Thanks for translations are also due to the coordinators at
+ translationproject.org.
+
+ * Statistical bug fixes:
+
+ - REGRESSION: Report correct standard error of the estimate (bug
+ #25677).
+
+ - T-TEST: Report correct significance of paired sample T-test in
+ the common case (bug #26936) and corner cases. Thanks to Mike
+ Griffiths and Matej Cepl for reporting these bugs.
+
+ * Build fixes and changes:
+
+ - Fix build with GTK+ 2.17.4 and later.
+
+ - Make running "make" after running "configure" with different
+ settings reliably rebuild version.c.
+
+ - Cygwin and MinGW build fixes.
+
+ - Fixes for building with recent gnulib.
+
+ - The Makefile now honors two new variables, PSPP_LDFLAGS and
+ PSPPIRE_LDFLAGS, that affect linking of the PSPP and PSPPIRE
+ binaries, respectively. This makes building easier for some
+ packagers.
+
+ - Fixes for "configure --enable-relocatable" (bug #25508).
+
+ * Data file bug fixes and changes:
+
+ - Fix reading text data files that contain a mix of white space
+ and commas. Now "a ,b" is treated as two fields containing "a"
+ and "b"; previously it was treated as three, with an empty field
+ in the middle.
+
+ - Fix writing corrupted .sav files on Windows.
+
+ - Fix writing variable labels longer than 252 bytes to save files.
+ Thanks to Robert Westlund for reporting this bug.
+
+ - Fix writing corrupted .por files (bug #26034).
+
+ - Fix reading .por files whose initial lines are not padded out
+ with spaces as expected.
+
+ - PSPP will no longer issue warnings about some .sav file records
+ or values that it does not understand. These warnings were
+ harmless, but needlessly alarmed some users.
+
+ - Fix crash reading empty string fields from PostgreSQL databases.
+
+ * Bug fixes that affect PSPP and PSPPIRE:
+
+ - Users may now control precision of output statistics. Instead
+ of hard coding the width and decimals of output numbers, respect
+ the default format in most instances. Counts are now normally
+ displayed with the format of the weight variable, if any.
+
+ - Fix crash when an INSERT command specifies the name of a file
+ that does not exist (bug #24569).
+
+ - Fix crash when CROSSTABS specifies a long-string variable (bugs
+ #24557 and #26131).
+
+ - Fix crash drawing pie charts with many segments.
+
+ - Fix crash when NUMERIC specifies an invalid format.
+
+ * PSPPIRE bug fixes and changes:
+
+ - On Windows, write the output file to the user's home directory
+ instead of the current directory, to better match user
+ expectations.
+
+ - Some data editor fixes.
+
+ * Documentation:
+
+ - Fix typo in BINOMIAL section of user manual (bug #25892).
+
+Changes from 0.6.0 to 0.6.1:
+
+ * Statistical bug fixes:
+
+ - Report correct standardized regression coefficients in linear
+ regression output (bug #23567).
+
+ * Bug fixes that affect PSPP and PSPPIRE:
+
+ - Avoid crash with pie charts (bug #24014).
+
+ - Don't append % to count totals (bug #24003).
+
+ - Don't crash on bad input (bug #24031).
+
+ - Don't crash if "end data." is not left aligned (bug #24115).
+
+ - Change default workspace value to 64 MB, to avoid unnecessary
+ disk accesses on modern machines.
+
+ * PSPPIRE bug fixes:
+
+ - Add ".sav" or ".por" suffix to filename when saving with Save_As
+ (bug #23137).
+
+ - Make it possible to reopen the output window on Windows (bug
+ #24033).
+
+ - A POSIX regular expression library is now included and used
+ automatically if the host does not have one or has one that is
+ inadequate.
+
+ * Build fixes and changes:
+
+ - Work around bug in GSL that prevented build with recent GCC
+ versions without manually adding -fgnu89-inline to CFLAGS.
+
+ - Also warn about missing prerequisites as we encounter them (bug
+ #24445).
+
+ - Distribute necessary files to allow users working from the
+ distributed tarball to configure with --enable-gui-tools.
+
+ - Append $(EXEEXT_FOR_BUILD) to output file name when building
+ q2c, fixing build problems on Windows.
+
+ - GSL 1.8 or later is now required.
+
+ - Build errors with --enable-relocatable were fixed.
+
+ * The German translations were removed, since native German speakers
+ found them too poor to be useful.
+
+Changes from 0.4.0 to 0.6.0:
* The PSPP license is now version 3 or later of the GNU General
Public License. Previously, it was version 2 or later.
* In many situations where PSPP once terminated with a fatal
error, PSPP now recovers and continues execution.
+ * PSPP is now able to start up and run even if it cannot find its
+ configuration files.
+
* Journaling of interactive commands to a disk file is now
implemented. By default, journaling is enabled, to a file named
`pspp.jnl' in the current directory. SET JOURNAL may be used to
Output changes:
+ * Output configuration options have changed. Please refer to the
+ manual for a full description of the available options.
+
+ In consequence, you will need to reinstall your "devices" file.
+ "make install" will do this for you.
+
* Most error messages are now written to PSPP output files by
default. SET ERROR can be used to disable this behavior.
automatically adapts to the terminal size, even if the terminal
is resized.
- * The ASCII output driver now supports charts in output. Charts
- are written as separate files that the main output file refers
- to. By default, charts are written in PNG format to files named
- pspp-1.png, pspp-2.png, and so on.
+ * ASCII driver:
+
+ - This driver now supports charts in output. Charts are written
+ as separate files that the main output file refers to. By
+ default, charts are written in PNG format to files named
+ pspp-1.png, pspp-2.png, and so on.
+
+ - Configurations are provided that use VT100 (and xterm)
+ line-drawing characters in tables. The option "-o list-vt100"
+ requests use of this device for output to pspp.list.
+
+ * PostScript driver:
+
+ - The default paper size is now determined using the PAPERSIZE
+ environment variable, or the LC_PAPER locale category on
+ systems that support it. If these are not set, the default is
+ now A4, instead of US letter. To make US letter the default,
+ set PAPERSIZE to "letter" in your environment.
- * An output device is provided that uses VT100 (and xterm)
- line-drawing characters in tables. The option "-o list-vt100"
- requests use of this device for output to pspp.list.
+ - Font metrics are now read from AFM files, instead of
+ Groff-format metrics files. PostScript fonts can now be
+ embedded in output.
- * The default paper size for the PostScript driver is now determined
- using the PAPERSIZE environment variable, or the LC_PAPER locale
- category on systems that support it. If these are not set, the
- default is now A4, instead of US letter. To make US letter the
- default, set PAPERSIZE to "letter" in your environment.
+ In consequence, you will need to install an AFM file for each
+ font used in PostScript output. "make install" will install
+ AFM files for the standard PostScript fonts, including the
+ ones that the PostScript driver uses by default.
- * Standard paper sizes no longer need to be specified through a
- configuration file. The "papersize" configuration file is no
- longer needed, or supported.
+ - Standard paper sizes no longer need to be specified through a
+ configuration file. The "papersize" configuration file is no
+ longer needed, or supported.
- * The HTML and PostScript prologues are no longer obtained from
- the "html-prologue" and "ps-prologue" configuration files.
- These configuration files are no longer needed, or supported.
+ - The PostScript prologue is no longer obtained from the
+ "ps-prologue" configuration file. This configuration file is
+ no longer needed, or supported.
+
+ * HTML driver:
+
+ - The HTML prologue is no longer obtained from the
+ "html-prologue" configuration file. This configuration file
+ is no longer needed, or supported.
Command language changes:
* The following commands are new:
- - GET DATA, which currently supports reading Gnumeric files. It
- will be extended later to read other types of foreign data.
+ - GET DATA, which currently supports reading Gnumeric files and
+ text data files. It will be extended later to read other
+ types of foreign data.
- CD, to change the current directory.
- ADD DOCUMENT, to add text to active file documents.
+ - CLOSE FILE HANDLE (a PSPP extension; see below).
+
- XEXPORT, a PSPP extension that is a transformation equivalent
to EXPORT.
- VALUELABEL, to obtain the value label for a value.
+ * PSPP now supports very long string variables (over 255 bytes
+ long).
+
* MATCH FILES now supports the FIRST and LAST subcommands.
* Previous versions of PSPP prohibited using commands to both read and
* The output format for variables created by VECTOR may now be
specified as part of the VECTOR syntax.
+ "Scratch files", a new PSPP extension:
+
+ A scratch file, like a system file, consists of a dictionary and
+ any number of cases. Small scratch files are stored in memory;
+ one that grows too large is written to disk. By default, any file
+ handle whose name begins with # is assumed to refer to a scratch
+ file.
+
+ Scratch files can be used just about anywhere a system or portable
+ file can be used. Also, portable files are now allowed in most
+ places that system files were allowed in previous PSPP version.
+
+ A new CLOSE FILE HANDLE command allows the storage associated with
+ scratch files to be freed. It also allows file handles to be
+ reassigned to new files.
+
+ For more information on scratch files, refer to the "File Handles"
+ section in the PSPP manual. For specifics of what commands now
+ allow what kinds of files to be specified, refer to the
+ documentation on those particular commands.
+
Data access changes:
* Binary formats and IBM/360 formats, including ASCII/EBCDIC
For developers, the build system now requires Autoconf 2.60 and
Automake 1.10.
\f
-Changes since 0.4.0 to 0.4.1:
-
- Added support for very long string variables (over 255 bytes long).
-
- Output changes:
-
- * Output configuration options have changed. Please refer to the
- manual for a full description of the available options.
-
- In consequence, you will need to reinstall your "devices" file.
- "make install" will do this for you.
-
- * The PostScript driver now obtains font metrics from AFM files,
- instead of Groff-format metrics files. It can now embed
- PostScript fonts in its output.
-
- In consequence, you will need to install an AFM file for each
- font used in PostScript output. "make install" will install AFM
- files for the standard PostScript files, including the ones that
- the PostScript driver uses by default.
-
- Newly implemented commands and statistical features:
-
- * CLOSE FILE HANDLE (a PSPP extension; see below).
-
- * REGRESSION.
-
- * XEXPORT (a PSPP extension).
-
- New PSPP extension:
-
- A new PSPP extension called "scratch files" has been implemented.
- A scratch file, like a system file, consists of a dictionary and
- any number of cases. Small scratch files are stored in memory;
- one that grows too large is written to disk. By default, any file
- handle whose name begins with # is assumed to refer to a scratch
- file.
-
- Scratch files can be used just about anywhere a system or portable
- file can be used. Also, portable files are now allowed in most
- places that system files were allowed in previous PSPP version.
-
- A new CLOSE FILE HANDLE command allows the storage associated with
- scratch files to be freed. It also allows file handles to be
- reassigned to new files.
-
- For more information on scratch files, refer to the "File Handles"
- section in the PSPP manual. For specifics of what commands now
- allow what kinds of files to be specified, refer to the
- documentation on those particular commands.
-
- PSPP is now able to start up and run even if it cannot find its
- configuration files.
-
Changes from 0.3.0 to 0.4.0:
Changes in build dependencies:
----------------------------------------------------------------------
Copyright information:
-Copyright (C) 1996-9, 2000 Free Software Foundation, Inc.
-
Permission is granted to anyone to make or distribute verbatim
copies of this document as received, in any medium, provided that
the copyright notice and this permission notice are preserved, thus
projects / pspp-builds.git / blobdiff