From: Ben Pfaff Date: Fri, 31 Dec 2004 07:06:38 +0000 (+0000) Subject: Updates. X-Git-Url: https://pintos-os.org/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=d0147cf7556c5dc09300e5c5ac6ebd89a4618875;p=pintos-anon Updates. --- diff --git a/doc/threads.texi b/doc/threads.texi index ab355ad..a6c4200 100644 --- a/doc/threads.texi +++ b/doc/threads.texi @@ -655,7 +655,8 @@ off interrupts. @item Examples of synchronization mechanisms have been presented in lecture. Going over these examples should help you understand when each type is -useful or needed. +useful or needed. @xref{Synchronization}, for specific information +about synchronization in Pintos. @end enumerate @item @@ -672,8 +673,8 @@ wake ups. I think it's a problem in the test program. What gives?} @anchor{Out of Order 1-1} This test is inherently full of race conditions. On a real system it -wouldn't work perfectly all the time either. However, you can help it -work more reliably: +wouldn't work perfectly all the time either. There are a few ways you +can help it work more reliably: @itemize @bullet @item @@ -683,17 +684,11 @@ Make time slices longer by increasing @code{TIME_SLICE} in @item Make the timer tick more slowly by decreasing @code{TIMER_FREQ} in @file{timer.h} to its minimum value of 19. - -@item -Increase the serial output speed to the maximum of 115,200 bps by -modifying the call to @func{set_serial} in @func{serial_init_poll} in -@file{devices/serial.c}. @end itemize The former two changes are only desirable for testing problem 1-1 and possibly 1-3. You should revert them before working on other parts -of the project or turn in the project. The latter is harmless, so you -can retain it or revert it at your option. +of the project or turn in the project. @item @b{Should @file{p1-1.c} be expected to work with the MLFQS turned on?}