-Time-stamp: <2005-05-16 22:22:15 blp>
+Time-stamp: <2006-05-03 22:28:57 blp>
-Format specifier and missing values code needs to be rewritten for lowered
-crappiness.
+Procedure processing:
+
+* Should not need temporary casefile in the common case.
+
+* All of the procedure_*() variants can (and should) be implemented in terms of
+ a variant that provides "proc_func" plus an "end_func" called after all
+ processing is complete.
+
+* The "split" variants should not dump the splits to the output file
+ automatically. There is no need for the procedure code to talk to the output
+ manager.
+
+* LAG need not be as much of a special case.
+
+Get rid of need for GNU diff in `make check'.
+
+Format specifier code needs to be rewritten for lowered crappiness.
CROSSTABS needs to be re-examined.
Kruskal-Wallis on NPAR TESTS and for Spearman and the Johnkheere trend test (in
other procedures).
-lex_token_representation() should take a buffer to fill.
-
-Make valgrind --leak-check=yes --show-reachable=yes work.
-
Add NOT_REACHED() macro.
-Add compression to casefiles.
-
-There needs to be another layer onto the lexer, which should probably be
-entirely rewritten anyway. The lexer needs to read entire *commands* at a
-time, not just a *line* at a time. It also needs to support arbitrary putback,
-probably by just backing up the "current position" in the command buffer.
-
Scratch variables should not be available for use following TEMPORARY.
-Details of N OF CASES, SAMPLE, FILTER, PROCESS IF, TEMPORARY, etc., need to be
-checked against the documentation. See notes on these at end of file for a
-start.
-
Check our results against the NIST StRD benchmark results at
strd.itl.nist.gov/div898/strd
-In debug mode hash table code should verify that collisions are reasonably low.
-
-Use AFM files instead of Groff font files, and include AFMs for our default
-fonts with the distribution.
-
Storage of value labels on disk is inefficient. Invent new data structure.
-Add an output flag which would cause a page break if a table segment could fit
-vertically on a page but it just happens to be positioned such that it won't.
-
Fix spanned joint cells, i.e., EDLEVEL on crosstabs.stat.
-Cell footnotes.
-
-PostScript driver should emit thin lines, then thick lines, to optimize time
-and space.
-
-New functions? var_name_or_label(), tab_value_or_label()
-
-Should be able to bottom-justify cells. It'll be expensive, though, by
-requiring an extra metrics call.
-
-Perhaps instead of the current lines we should define the following line types:
-null, thin, thick, double. It might look pretty classy.
-
-Perhaps thick table borders that are cut off by a page break should decay to
-thin borders. (i.e., on a thick bordered table that's longer than one page,
-but narrow, the bottom border would be thin on the first page, and the top and
-bottom borders on middle pages.)
-
-Support multi-line titles on tables. (For the first page only, presumably.)
-
-Rewrite the convert_F() function in data-out.c to be nicer code.
-
-In addition to searching the source directory, we should search the current
-directory (for data files). (Yuck!)
-
-Fix line-too-long problems in PostScript code, instead of covering them up.
-setlinecap is *not* a proper solution.
-
-Fix som_columns().
-
-Has glob.c been pared down enough?
-
-Improve interactivity of output by allowing a `commit' function for a page.
-This will also allow for infinite-length pages.
-
-Implement thin single lines, should be pretty easy now.
-
SELECT IF should be moved before other transformations whenever possible. It
should only be impossible when one of the variables referred to in SELECT IF is
created or modified by a previous transformation.
-The manual: add text, add index entries, add examples.
-
-The inline file should be improved: There should be *real* detection of whether
-it is used (in dfm.c:cmd_begin_data), not after-the-fact detection.
-
Figure out a stylesheet for messages displayed by PSPP: i.e., what quotation
marks around filenames, etc.
-New SET subcommand: OUTPUT. i.e., SET OUTPUT="filename" to send output to that
-file; SET OUTPUT="filename"(APPEND) to append to that file; SET OUTPUT=DEFAULT
-to reset everything. There might be a better approach, though--think about it.
-
From Zvi Grauer <z.grauer@csuohio.edu> and <zvi@mail.ohio.net>:
1. design of experiments software, specifically Factorial, response surface
6. Categorical data analsys ?
-IDEAS
------
-
-In addition to an "infinite journal", we should keep a number of
-individual-session journals, pspp.jnl-1 through pspp.jnl-X, renaming and
-deleting as needed. All of the journals should have date/time comments.
-
-Qualifiers for variables giving type--categorical, ordinal, ...
-
-Analysis Wizard
-
-Consider consequences of xmalloc(), fail(), hcf() in interactive
-use:
-a. Can we safely just use setjmp()/longjmp()?
-b. Will that leak memory?
-i. I don't think so: all procedure-created memory is either
-garbage-collected or globally-accessible.
-ii. But you never know... esp. w/o Checker.
-c. Is this too early to worry? too late?
-
-Need to implement a shared buffer for funny functions that require relatively
-large permanent transient buffers (1024 bytes or so), that is, buffers that are
-permanent in the sense that they probably shouldn't be deallocated but are only
-used from time to time, buffers that can't be allocated on the stack because
-they are of variable and unpredictable but usually relatively small (usually
-line buffers). There are too many of these lurking around; can save a sizeable
-amount of space at very little overhead and with very little effort by merging
-them.
-
-Clever multiplatform GUI idea (due partly to John Williams): write a GUI in
-Java where each statistical procedure dialog box could be downloaded from the
-server independently. The statistical procedures would run on (the/a) server
-and results would be reported through HTML tables viewed with the user's choice
-of web browsers. Help could be implemented through the browser as well.
-
-HOWTOs
-------
-
-MORE NOTES/IDEAS/BUGS
----------------------
-
Sometimes very wide (or very tall) columns can occur in tables. What is a good
way to truncate them? It doesn't seem to cause problems for the ascii or
postscript drivers, but it's not good in the general case. Should they be
for instance through a wide PRINT request--try time-date.stat with a narrow
ascii page or with the postscript driver on letter size paper.)
-NULs in input files break the products we're replacing: although it will input
-them properly and display them properly as AHEX format, it truncates them in A
-format. Also, string-manipulation functions such as CONCAT truncate their
-results after the first NUL. This should simplify the result of PSPP design.
-Perhaps those ugly a_string, b_string, ..., can all be eliminated.
-
From Moshe Braner <mbraner@nessie.vdh.state.vt.us>: An idea regarding MATCH
FILES, again getting BEYOND the state of SPSS: it always bothered me that if I
have a large data file and I want to match it to a small lookup table, via
projects / pspp-builds.git / blobdiff