1 # Message strings for PSPP
2 # Copyright (C) YEAR Free Software Foundation, Inc.
3 # This file is distributed under the same license as the PSPP package.
4 # Ben Pfaff <blp@gnu.org>
9 "Project-Id-Version: PSPP 0.3.1\n"
10 "Report-Msgid-Bugs-To: pspp-dev@gnu.org\n"
11 "POT-Creation-Date: 2004-01-27 08:20+0800\n"
12 "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
13 "Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
14 "Language-Team: LANGUAGE <LL@li.org>\n"
16 "Content-Type: text/plain; charset=CHARSET\n"
17 "Content-Transfer-Encoding: 8bit\n"
18 "Plural-Forms: nplurals=INTEGER; plural=EXPRESSION;\n"
20 #: src/crosstabs.q:255
22 "Missing mode REPORT not allowed in general mode. Assuming MISSING=TABLE."
25 #: src/crosstabs.q:265
26 msgid "Write mode ALL not allowed in general mode. Assuming WRITE=CELLS."
29 #: src/crosstabs.q:324
33 #: src/crosstabs.q:391
34 msgid "VARIABLES must be specified before TABLES."
37 #: src/crosstabs.q:428
39 msgid "Maximum value (%ld) less than minimum value (%ld)."
42 #: src/crosstabs.q:865
46 #: src/crosstabs.q:867
50 #: src/crosstabs.q:868 src/frequencies.q:999
54 #: src/crosstabs.q:869 src/frequencies.q:1066
58 #: src/crosstabs.q:870 src/crosstabs.q:1071 src/crosstabs.q:1800
59 #: src/frequencies.q:1075
63 #: src/crosstabs.q:880
67 #: src/crosstabs.q:881 src/frequencies.q:1003 src/frequencies.q:1004
68 #: src/frequencies.q:1005
72 #: src/crosstabs.q:1120
76 #: src/crosstabs.q:1121
80 #: src/crosstabs.q:1122
84 #: src/crosstabs.q:1123
88 #: src/crosstabs.q:1124
92 #: src/crosstabs.q:1125
96 #: src/crosstabs.q:1126
100 #: src/crosstabs.q:1127
104 #: src/crosstabs.q:1160 src/crosstabs.q:1187 src/crosstabs.q:1207
105 #: src/crosstabs.q:1228
109 #: src/crosstabs.q:1161 src/crosstabs.q:1188 src/crosstabs.q:1208
110 #: src/crosstabs.q:1230 src/frequencies.q:1001 src/frequencies.q:1118
111 #: src/sysfile-info.c:536 src/vfm.c:1094
115 #: src/crosstabs.q:1162
119 #: src/crosstabs.q:1164
120 msgid "Asymp. Sig. (2-sided)"
123 #: src/crosstabs.q:1166
124 msgid "Exact. Sig. (2-sided)"
127 #: src/crosstabs.q:1168
128 msgid "Exact. Sig. (1-sided)"
131 #: src/crosstabs.q:1186 src/crosstabs.q:1227
135 #: src/crosstabs.q:1189 src/crosstabs.q:1231
136 msgid "Asymp. Std. Error"
139 #: src/crosstabs.q:1190 src/crosstabs.q:1232
143 #: src/crosstabs.q:1191 src/crosstabs.q:1233
147 #: src/crosstabs.q:1206
149 msgid " 95%% Confidence Interval"
152 #: src/crosstabs.q:1209
156 #: src/crosstabs.q:1210
160 #: src/crosstabs.q:1229
164 #: src/crosstabs.q:1977
165 msgid "Pearson Chi-Square"
168 #: src/crosstabs.q:1978
169 msgid "Likelihood Ratio"
172 #: src/crosstabs.q:1979
173 msgid "Fisher's Exact Test"
176 #: src/crosstabs.q:1980
177 msgid "Continuity Correction"
180 #: src/crosstabs.q:1981
181 msgid "Linear-by-Linear Association"
184 #: src/crosstabs.q:2018 src/crosstabs.q:2088 src/crosstabs.q:2147
185 msgid "N of Valid Cases"
188 #: src/crosstabs.q:2034 src/crosstabs.q:2163
189 msgid "Nominal by Nominal"
192 #: src/crosstabs.q:2035 src/crosstabs.q:2164
193 msgid "Ordinal by Ordinal"
196 #: src/crosstabs.q:2036
197 msgid "Interval by Interval"
200 #: src/crosstabs.q:2037
201 msgid "Measure of Agreement"
204 #: src/crosstabs.q:2042
208 #: src/crosstabs.q:2043
212 #: src/crosstabs.q:2044
213 msgid "Contingency Coefficient"
216 #: src/crosstabs.q:2045
217 msgid "Kendall's tau-b"
220 #: src/crosstabs.q:2046
221 msgid "Kendall's tau-c"
224 #: src/crosstabs.q:2047
228 #: src/crosstabs.q:2048
229 msgid "Spearman Correlation"
232 #: src/crosstabs.q:2049
236 #: src/crosstabs.q:2050
240 #: src/crosstabs.q:2120
242 msgid "Odds Ratio for %s (%g / %g)"
245 #: src/crosstabs.q:2123
247 msgid "Odds Ratio for %s (%.*s / %.*s)"
250 #: src/crosstabs.q:2131
252 msgid "For cohort %s = %g"
255 #: src/crosstabs.q:2134
257 msgid "For cohort %s = %.*s"
260 #: src/crosstabs.q:2165
261 msgid "Nominal by Interval"
264 #: src/crosstabs.q:2170
268 #: src/crosstabs.q:2171
269 msgid "Goodman and Kruskal tau"
272 #: src/crosstabs.q:2172
273 msgid "Uncertainty Coefficient"
276 #: src/crosstabs.q:2173
280 #: src/crosstabs.q:2174
284 #: src/crosstabs.q:2179
288 #: src/crosstabs.q:2180 src/crosstabs.q:2181
293 #: src/descript.q:152 src/frequencies.q:94
297 #: src/descript.q:152
301 #: src/descript.q:153 src/frequencies.q:95
305 #: src/descript.q:153
309 #: src/descript.q:153
313 #: src/descript.q:154
314 msgid "standard error of mean"
317 #: src/descript.q:155 src/frequencies.q:98
321 #: src/descript.q:155
325 #: src/descript.q:156
326 msgid "standard deviation"
329 #: src/descript.q:157 src/frequencies.q:99
333 #: src/descript.q:158
337 #: src/descript.q:158
341 #: src/descript.q:159 src/frequencies.q:100
345 #: src/descript.q:160
349 #: src/descript.q:160
353 #: src/descript.q:161 src/frequencies.q:101
357 #: src/descript.q:161
361 #: src/descript.q:161
365 #: src/descript.q:162
366 msgid "standard error of kurtosis"
369 #: src/descript.q:163 src/frequencies.q:102
373 #: src/descript.q:163
377 #: src/descript.q:164
381 #: src/descript.q:165 src/frequencies.q:103
385 #: src/descript.q:165
389 #: src/descript.q:165
393 #: src/descript.q:166
394 msgid "standard error of skewness"
397 #: src/descript.q:167 src/frequencies.q:104
401 #: src/descript.q:167
405 #: src/descript.q:167 src/sfm-read.c:1202
409 #: src/descript.q:168 src/frequencies.q:105
413 #: src/descript.q:168
417 #: src/descript.q:169
421 #: src/descript.q:170 src/frequencies.q:106
425 #: src/descript.q:170
429 #: src/descript.q:171
433 #: src/descript.q:172 src/frequencies.q:107
437 #: src/descript.q:172
441 #: src/descript.q:213 src/list.q:144
442 msgid "No variables specified."
445 #: src/descript.q:219
446 msgid "OPTIONS may not be used with SAVE, FORMAT, or MISSING."
449 #: src/descript.q:281
451 msgid "It's not possible to sort on `%s' without displaying `%s'."
454 #: src/descript.q:295
456 "At least one case in the data file had a weight value that was system-"
457 "missing, zero, or negative. These case(s) were ignored."
460 #: src/descript.q:336
462 "Names for z-score variables must be given for individual variables, not for "
463 "groups of variables."
466 #: src/descript.q:344
467 msgid "Name for z-score variable expected."
470 #: src/descript.q:349
473 "Z-score variable name `%s' is a duplicate variable name with a current "
477 #: src/descript.q:358
479 msgid "Z-score variable name `%s' is used multiple times."
482 #: src/descript.q:366
483 msgid "`)' expected after z-score variable name."
486 #: src/descript.q:426
488 "Ran out of generic names for Z-score variables. There are only 126 generic "
489 "names: ZSC001-ZSC0999, STDZ01-STDZ09, ZZZZ01-ZZZZ09, ZQZQ01-ZQZQ09."
492 #: src/descript.q:455
493 msgid "Mapping of variables to corresponding Z-scores."
496 #: src/descript.q:460
500 #: src/descript.q:461
504 #: src/descript.q:548 src/descript.q:554
508 #: src/descript.q:792 src/data-list.c:732 src/data-list.c:869 src/print.c:805
509 #: src/sysfile-info.c:135 src/sysfile-info.c:370 src/vfm.c:1093
513 #: src/descript.q:796
517 #: src/descript.q:797
521 #: src/descript.q:824
523 msgid "Valid cases = %g; cases with missing value(s) = %g."
526 #: src/file-handle.q:72
529 "File handle %s had already been defined to refer to file %s. It is not "
530 "possible to redefine a file handle within a session."
533 #: src/file-handle.q:88 src/autorecode.c:121 src/command.c:696
534 #: src/compute.c:284 src/data-list.c:372 src/data-list.c:842
535 #: src/data-list.c:1645 src/do-if.c:264 src/get.c:359 src/lexer.c:384
536 #: src/loop.c:248 src/matrix-data.c:506 src/print.c:340 src/print.c:1081
537 #: src/recode.c:409 src/sel-if.c:56 src/sel-if.c:136 src/vector.c:197
538 msgid "expecting end of command"
541 #: src/file-handle.q:94
542 msgid "The FILE HANDLE required subcommand NAME is not present."
545 #: src/file-handle.q:107
547 "Fixed length records were specified on /RECFORM, but record length was not "
548 "specified on /LRECL. 80-character records will be assumed."
551 #: src/file-handle.q:114
554 "Record length (%ld) must be at least one byte. 80-character records will be "
558 #: src/file-handle.q:126 src/file-handle.q:140
561 "%s is not implemented, as the author doesn't know what it is supposed to "
562 "do. Send a note to %s."
565 #: src/file-handle.q:147 src/file-handle.q:150
567 msgid "%s is not implemented. If you care, complain."
570 #: src/file-handle.q:232
572 msgid "File handle `%s' has not been previously declared on FILE HANDLE."
575 #: src/file-handle.q:319
576 msgid "<Inline File>"
579 #: src/file-handle.q:338
580 msgid "expecting a file name or handle"
583 #: src/frequencies.q:96
587 #: src/frequencies.q:97
591 #: src/frequencies.q:268
593 "At most one of BARCHART, HISTOGRAM, or HBAR should be given. HBAR will be "
594 "assumed. Argument values will be given precedence increasing along the "
598 #: src/frequencies.q:349
601 "MAX must be greater than or equal to MIN, if both are specified. However, "
602 "MIN was specified as %g and MAX as %g. MIN and MAX will be ignored."
605 #: src/frequencies.q:627
607 "Upper limit of integer mode value range must be greater than lower limit."
610 #: src/frequencies.q:639
612 msgid "Variable %s specified multiple times on VARIABLES subcommand."
615 #: src/frequencies.q:652
617 msgid "Integer mode specified, but %s is not a numeric variable."
620 #: src/frequencies.q:714
621 msgid "`)' expected after GROUPED interval list."
624 #: src/frequencies.q:724
626 msgid "Variables %s specified on GROUPED but not on VARIABLES."
629 #: src/frequencies.q:727
631 msgid "Variables %s specified multiple times on GROUPED subcommand."
634 #: src/frequencies.q:787
635 msgid "Percentile list expected after PERCENTILES."
638 #: src/frequencies.q:795
639 msgid "Percentiles must be greater than 0 and less than 100."
642 #: src/frequencies.q:1000 src/frequencies.q:1090 src/frequencies.q:1091
643 #: src/frequencies.q:1121
647 #: src/frequencies.q:1002
651 #: src/frequencies.q:1021
655 #: src/frequencies.q:1119
659 #: src/frequencies.q:1120 src/frequencies.q:1122
663 #: src/frequencies.q:1277
665 msgid "No valid data for variable %s; statistics not displayed."
668 #: src/frequencies.q:1300
675 "The first case (%ld) specified precedes the last case (%ld) specified. The "
676 "values will be swapped."
682 "The first case (%ld) to list is less than 1. The value is being reset to 1."
688 "The last case (%ld) to list is less than 1. The value is being reset to 1."
693 msgid "The step value %ld is less than 1. The value is being reset to 1."
697 msgid "`/FORMAT WEIGHT' specified, but weighting is not on."
700 #: src/list.q:259 src/html.c:402
702 msgid "Cannot open first page on HTML device %s."
710 msgid "Missing required subcommand TABLES."
714 msgid "TABLES or CROSSBREAK subcommand may not appear more than once."
720 "Variable %s specified on TABLES or CROSSBREAK, but not specified on "
726 msgid "LOWEST and HIGHEST may not be used for independent variables (%s)."
732 "Independent variables (%s) may not have noninteger endpoints in their ranges."
736 msgid "VARIABLES must precede TABLES."
741 msgid "Upper value (%g) is less than lower value (%g) on VARIABLES subcommand."
744 #: src/set.q:216 src/set.q:219 src/set.q:237 src/set.q:306 src/set.q:312
745 #: src/set.q:320 src/set.q:327 src/set.q:329 src/set.q:348 src/set.q:352
746 #: src/set.q:356 src/set.q:370 src/set.q:372 src/set.q:376 src/set.q:693
747 #: src/set.q:774 src/set.q:855
749 msgid "%s is obsolete."
753 msgid "Active file compression is not yet implemented (and probably won't be)."
757 msgid "CPI must be greater than 0."
761 msgid "LPI must be greater than 0."
766 "CASE is not implemented and probably won't be. If you care, complain about "
772 msgid "Value for MITERATE (%ld) must be greater than 0."
777 msgid "Value for MNEST (%ld) must be greater than 0."
781 msgid "MXERRS must be at least 1."
785 msgid "MXLOOPS must be at least 1."
789 msgid "TBFONTS not implemented."
793 msgid "TB1 not implemented."
799 "CC%c: Length of custom currency string `%s' (%d) exceeds maximum length of "
806 "CC%c: Custom currency string `%s' does not contain exactly three periods or "
811 msgid "LENGTH must be at least 1."
815 msgid "Missing identifier in RESULTS subcommand."
819 msgid "Unrecognized identifier in RESULTS subcommand."
823 msgid "WIDTH must be at least 1."
829 "FORMAT requires numeric output format as an argument. Specified format %s "
834 msgid "Text color must be in range 0-15."
838 msgid "Background color must be in range 0-7."
842 msgid "Border color must be in range 0-7."
846 msgid "Lower window color must be between 0 and 6."
850 msgid "Upper window color must be between 0 and 6."
854 msgid "Frame color must be between 0 and 6."
858 msgid "VIEWLENGTH not implemented."
862 msgid "Drive letter expected in WORKDEV subcommand."
866 msgid "expecting variable name in GROUPS subcommand"
871 msgid "Long string variable %s is not valid here."
876 "When applying GROUPS to a string variable, at least one value must be "
883 "PAIRED was specified but the number of variables preceding WITH (%d) did not "
884 "match the number following (%d)."
888 msgid "At least two variables must be specified on PAIRS."
891 #: src/aggregate.c:188
892 msgid "OUTFILE specified multiple times."
895 #: src/aggregate.c:214
896 msgid "while expecting COLUMNWISE"
899 #: src/aggregate.c:229
900 msgid "BREAK specified multiple times."
903 #: src/aggregate.c:258
904 msgid "BREAK subcommand not specified."
907 #: src/aggregate.c:494
908 msgid "expecting aggregation function"
911 #: src/aggregate.c:510
913 msgid "Unknown aggregation function %s."
916 #: src/aggregate.c:525
917 msgid "expecting `('"
920 #: src/aggregate.c:560
922 msgid "Missing argument %d to %s."
925 #: src/aggregate.c:568
927 msgid "Arguments to %s must be of same type as source variables."
930 #: src/aggregate.c:578 src/expr-prs.c:664
931 msgid "expecting `)'"
934 #: src/aggregate.c:590 src/autorecode.c:110
937 "Number of source variables (%d) does not match number of target variables (%"
941 #: src/aggregate.c:657
944 "Variable name %s is not unique within the aggregate file dictionary, which "
945 "contains the aggregate variables and the break variables."
948 #: src/apply-dict.c:68
950 msgid "Variable %s is %s in target file, but %s in source file."
953 #: src/apply-dict.c:71 src/apply-dict.c:72 src/expr-prs.c:1127
954 #: src/expr-prs.c:1472 src/expr-prs.c:1488 src/formats.c:103
955 #: src/pfm-read.c:636 src/print.c:700 src/sfm-read.c:916 src/sfm-read.c:1042
956 #: src/sfm-read.c:1043
960 #: src/apply-dict.c:71 src/apply-dict.c:72 src/expr-prs.c:1127
961 #: src/expr-prs.c:1469 src/expr-prs.c:1486 src/formats.c:103
962 #: src/pfm-read.c:636 src/print.c:700 src/sfm-read.c:916 src/sfm-read.c:1042
963 #: src/sfm-read.c:1043
967 #: src/apply-dict.c:84
969 msgid "Cannot add value labels from source file to long string variable %s."
972 #: src/apply-dict.c:130
975 "Cannot apply missing values from source file to long string variable %s."
978 #: src/apply-dict.c:163
979 msgid "No matching variables found between the source and target files."
984 msgid "ASCII driver initializing as `%s'..."
990 "ascii driver: Area of page excluding margins and headers must be at least 59 "
991 "characters wide by 15 lines long. Page as configured is only %d characters "
995 #: src/ascii.c:381 src/html.c:102 src/postscript.c:458
997 msgid "%s: Initialization complete."
1000 #: src/ascii.c:392 src/html.c:114 src/postscript.c:471
1002 msgid "%s: Beginning closing..."
1005 #: src/ascii.c:402 src/html.c:119 src/postscript.c:490
1007 msgid "%s: Finished closing."
1013 "Bad index value for `box' key: syntax is box[INDEX], 0 <= INDEX < %d "
1014 "decimal, with INDEX expressed in base 4."
1019 msgid "Duplicate value for key `%s'."
1024 msgid "Unknown configuration parameter `%s' for ascii device driver."
1030 "Unknown character set `%s'. Valid character sets are `ascii' and `latin1'."
1036 "Unknown overstrike style `%s'. Valid overstrike styles are `single' and "
1043 "Unknown carriage return style `%s'. Valid carriage return styles are `cr' "
1047 #: src/ascii.c:522 src/postscript.c:680
1049 msgid "Positive integer required as value for `%s'."
1054 msgid "Zero or positive integer required as value for `%s'."
1057 #: src/ascii.c:623 src/postscript.c:639
1059 msgid "Boolean value expected for %s."
1062 #: src/ascii.c:655 src/ascii.c:670 src/ascii.c:687
1064 msgid "ASCII output driver: %s: %s"
1069 msgid "ascii_line_horz: bad hline (%d,%d),%d out of (%d,%d)\n"
1074 msgid "ascii_line_vert: bad vline %d,(%d,%d) out of (%d,%d)\n"
1079 msgid "ascii_line_intersection: bad intsct (%d,%d) out of (%d,%d)\n"
1084 msgid "%s: horiz=%d, vert=%d\n"
1089 msgid "Writing `%s': %s"
1092 #: src/ascii.c:1541 src/postscript.c:2095
1094 msgid "%s - Page %d"
1097 #: src/autorecode.c:131
1099 msgid "Target variable %s duplicates existing variable %s."
1102 #: src/autorecode.c:138
1104 msgid "Duplicate variable name %s among target variables."
1107 #: src/cmdline.c:112 src/cmdline.c:131 src/cmdline.c:143 src/command.c:196
1109 msgid "%s is not yet implemented."
1112 #: src/cmdline.c:157
1115 "Copyright (C) 1997-9, 2000 Free Software Foundation, Inc.\n"
1116 "This is free software; see the source for copying conditions. There is NO\n"
1117 "WARRANTY; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.\n"
1119 "Written by Ben Pfaff <blp@gnu.org>."
1122 #: src/cmdline.c:217
1125 "PSPP, a program for statistical analysis of sample data.\n"
1127 "Usage: %s [OPTION]... FILE...\n"
1129 "If a long option shows an argument as mandatory, then it is mandatory\n"
1130 "for the equivalent short option also. Similarly for optional arguments.\n"
1133 " -B, --config-dir=DIR set configuration directory to DIR\n"
1134 " -o, --device=DEVICE select output driver DEVICE and disable "
1136 " -d, --define=VAR[=VALUE] set environment variable VAR to VALUE, or empty\n"
1137 " -u, --undef=VAR undefine environment variable VAR\n"
1139 "Input and output:\n"
1140 " -f, --out-file=FILE send output to FILE (overwritten)\n"
1141 " -p, --pipe read script from stdin, send output to stdout\n"
1142 " -I-, --no-include clear include path\n"
1143 " -I, --include=DIR append DIR to include path\n"
1144 " -c, --command=COMMAND execute COMMAND before .pspp/rc at startup\n"
1146 "Language modifiers:\n"
1147 " -i, --interactive interpret scripts in interactive mode\n"
1148 " -n, --edit just check syntax; don't actually run the code\n"
1149 " -r, --no-statrc disable execution of .pspp/rc at startup\n"
1150 " -s, --safer don't allow some unsafe operations\n"
1152 "Informative output:\n"
1153 " -h, --help print this help, then exit\n"
1154 " -l, --list print a list of known driver classes, then exit\n"
1155 " -V, --version show PSPP version, then exit\n"
1156 " -v, --verbose increments verbosity level\n"
1158 "Non-option arguments:\n"
1159 " FILE1 FILE2 run FILE1, clear the dictionary, run FILE2\n"
1160 " FILE1 + FILE2 run FILE1 then FILE2 without clearing "
1162 " KEY=VALUE overrides macros in output initialization file\n"
1166 #: src/cmdline.c:249
1170 "Report bugs to <%s>.\n"
1173 #: src/command.c:134
1175 msgid "%s not allowed inside FILE TYPE/END FILE TYPE."
1178 #: src/command.c:138
1180 msgid "%s not allowed inside FILE TYPE GROUPED/END FILE TYPE."
1183 #: src/command.c:141
1184 msgid "RECORD TYPE must be the first command inside a FILE TYPE structure."
1187 #: src/command.c:186
1188 msgid "This line does not begin with a valid command name."
1191 #: src/command.c:214
1194 "%s is not allowed (1) before a command to specify the input program, such as "
1195 "DATA LIST, (2) between FILE TYPE and END FILE TYPE, (3) between INPUT "
1196 "PROGRAM and END INPUT PROGRAM."
1199 #: src/command.c:218
1201 msgid "%s is not allowed within an input program."
1204 #: src/command.c:219 src/command.c:220
1206 msgid "%s is only allowed within an input program."
1209 #: src/command.c:229
1211 msgid "%s command beginning\n"
1214 #: src/command.c:265
1217 "%s command completed\n"
1221 #: src/command.c:280
1222 msgid "The identifier(s) specified do not form a valid command name:"
1225 #: src/command.c:283
1226 msgid "The identifier(s) specified do not form a complete command name:"
1229 #: src/command.c:407
1231 "This command is not accepted in a syntax file. Instead, use FINISH to "
1232 "terminate a syntax file."
1235 #: src/command.c:425
1237 "This command is not executed in interactive mode. Instead, PSPP drops down "
1238 "to the command prompt. Use EXIT if you really want to quit."
1241 #: src/command.c:516
1242 msgid "The sentinel may not be the empty string."
1245 #: src/command.c:573
1246 msgid "This command not allowed when the SAFER option is set."
1249 #: src/command.c:596
1251 msgid "Error removing `%s': %s."
1254 #: src/command.c:646
1256 msgid "Couldn't fork: %s."
1259 #: src/command.c:687
1261 msgid "Error executing command: %s."
1264 #: src/command.c:733
1265 msgid "No operating system support for this command."
1268 #: src/command.c:762
1269 msgid "This command is not valid in a syntax file."
1272 #: src/compute.c:141 src/compute.c:200
1275 "When executing COMPUTE: SYSMIS is not a valid value as an index into vector %"
1279 #: src/compute.c:144 src/compute.c:204
1282 "When executing COMPUTE: %g is not a valid value as an index into vector %s."
1285 #: src/compute.c:343
1287 msgid "There is no vector named %s."
1290 #: src/compute.c:449
1291 msgid "Extra characters after expression."
1295 msgid "Destination cannot be a string variable."
1301 "%g THRU %g is not a valid range. The number following THRU must be at least "
1302 "as big as the number preceding THRU."
1306 msgid "data-file error: "
1316 msgid "(columns %d-%d"
1321 msgid ", field type %s) "
1324 #: src/data-in.c:223
1325 msgid "Field contents followed by garbage."
1328 #: src/data-in.c:256
1329 msgid "Overflow in floating-point constant."
1332 #: src/data-in.c:262
1333 msgid "Underflow in floating-point constant."
1336 #: src/data-in.c:268
1337 msgid "Field does not form a valid floating-point constant."
1340 #: src/data-in.c:294
1341 msgid "All characters in field must be digits."
1344 #: src/data-in.c:319
1345 msgid "Unrecognized character in field."
1348 #: src/data-in.c:337 src/data-in.c:587
1349 msgid "Field must have even length."
1352 #: src/data-in.c:347 src/data-in.c:597
1353 msgid "Field must contain only hex digits."
1356 #: src/data-in.c:385
1359 "Quality of zoned decimal (Z) input format code is suspect. Check your "
1360 "results three times. Report bugs to %s."
1363 #: src/data-in.c:397
1364 msgid "Zoned decimal field contains fewer than 2 characters."
1367 #: src/data-in.c:405
1368 msgid "Bad sign byte in zoned decimal number."
1371 #: src/data-in.c:422
1372 msgid "Format error in zoned decimal number."
1375 #: src/data-in.c:436
1376 msgid "Error in syntax of zoned decimal number."
1379 #: src/data-in.c:637
1380 msgid "Unexpected end of field."
1383 #: src/data-in.c:663
1384 msgid "Digit expected in field."
1387 #: src/data-in.c:688
1389 msgid "Day (%ld) must be between 1 and 31."
1392 #: src/data-in.c:713
1393 msgid "Delimiter expected between fields in date."
1396 #: src/data-in.c:810
1398 msgid "Month (%ld) must be between 1 and 12."
1401 #: src/data-in.c:851
1403 msgid "Month (%s) must be between I and XII."
1406 #: src/data-in.c:878
1408 msgid "Month name (%s...) is too long."
1411 #: src/data-in.c:889
1413 msgid "Bad month name (%s)."
1416 #: src/data-in.c:905
1418 msgid "Year (%ld) must be between 1582 and 19999."
1421 #: src/data-in.c:916
1423 msgid "Trailing garbage \"%s\" following date."
1426 #: src/data-in.c:931
1428 msgid "Julian day (%d) must be between 1 and 366."
1431 #: src/data-in.c:943
1433 msgid "Year (%d) must be between 1582 and 19999."
1436 #: src/data-in.c:959
1438 msgid "Quarter (%ld) must be between 1 and 4."
1441 #: src/data-in.c:969
1442 msgid "`Q' expected between quarter and year."
1445 #: src/data-in.c:985
1447 msgid "Week (%ld) must be between 1 and 53."
1450 #: src/data-in.c:996
1451 msgid "`WK' expected between week and year."
1454 #: src/data-in.c:1019
1455 msgid "Delimiter expected between fields in time."
1458 #: src/data-in.c:1031
1460 msgid "Hour (%ld) must be positive."
1463 #: src/data-in.c:1043
1465 msgid "Minute (%ld) must be between 0 and 59."
1468 #: src/data-in.c:1090
1470 msgid "Hour (%ld) must be between 0 and 23."
1473 #: src/data-in.c:1104 src/data-in.c:1139
1474 msgid "Day of the week expected in date value."
1477 #: src/data-in.c:1190
1478 msgid "Date is not in valid range between 15 Oct 1582 and 31 Dec 19999."
1481 #: src/data-in.c:1512
1483 msgid "Field too long (%d characters). Truncated after character %d."
1486 #: src/data-list.c:137
1488 "DATA LIST may not use a different file from that specified on its "
1489 "surrounding FILE TYPE."
1492 #: src/data-list.c:156
1493 msgid "The END subcommand may only be specified once."
1496 #: src/data-list.c:195
1497 msgid "Only one of FIXED, FREE, or LIST may be specified."
1500 #: src/data-list.c:321 src/print.c:301
1503 "The record number specified, %ld, is before the previous record, %d. Data "
1504 "fields must be listed in order of increasing record number."
1507 #: src/data-list.c:353 src/data-list.c:1634
1509 "SPSS-like or FORTRAN-like format specification expected after variable names."
1512 #: src/data-list.c:364 src/print.c:333
1514 "Variables are specified on records that should not exist according to "
1515 "RECORDS subcommand."
1518 #: src/data-list.c:396 src/data-list.c:409 src/print.c:510 src/print.c:523
1519 msgid "Column positions for fields must be positive."
1522 #: src/data-list.c:414
1523 msgid "The ending column for a field must be greater than the starting column."
1526 #: src/data-list.c:438 src/print.c:551
1527 msgid "A format specifier on this line has extra characters on the end."
1530 #: src/data-list.c:453 src/print.c:567
1531 msgid "The value for number of decimal places must be at least 1."
1534 #: src/data-list.c:467 src/print.c:580
1536 msgid "Input format %s doesn't accept decimal places."
1539 #: src/data-list.c:488 src/print.c:600
1541 msgid "The %d columns %d-%d can't be evenly divided into %d fields."
1544 #: src/data-list.c:528 src/data-list.c:625 src/data-list.c:825
1546 msgid "%s is a duplicate variable name."
1549 #: src/data-list.c:533
1551 msgid "There is already a variable %s of a different type."
1554 #: src/data-list.c:540
1556 msgid "There is already a string variable %s of a different width."
1559 #: src/data-list.c:614 src/print.c:689
1561 "The number of format specifications exceeds the number of variable names "
1565 #: src/data-list.c:698 src/print.c:773
1567 "There aren't enough format specifications to match the number of variable "
1571 #: src/data-list.c:733 src/print.c:806
1575 #: src/data-list.c:734 src/print.c:807
1579 #: src/data-list.c:735 src/data-list.c:870 src/print.c:808
1583 #: src/data-list.c:758
1585 msgid "Reading %d record from file %s."
1586 msgid_plural "Reading %d records from file %s."
1590 #: src/data-list.c:761
1592 msgid "Reading %d record from the command file."
1593 msgid_plural "Reading %d records from the command file."
1597 #: src/data-list.c:768 src/data-list.c:769
1598 msgid "Occurrence data specifications."
1601 #: src/data-list.c:893
1603 msgid "Reading free-form data from file %s."
1606 #: src/data-list.c:894
1607 msgid "Reading free-form data from the command file."
1610 #: src/data-list.c:945 src/matrix-data.c:939
1611 msgid "Scope of string exceeds line."
1614 #: src/data-list.c:1006
1615 msgid "Attempt to read past end of file."
1618 #: src/data-list.c:1035
1619 msgid "abort in write_case()\n"
1622 #: src/data-list.c:1063
1624 msgid "Partial case of %d of %d records discarded."
1627 #: src/data-list.c:1112
1629 msgid "Partial case discarded. The first variable missing was %s."
1632 #: src/data-list.c:1153
1635 "Missing value(s) for all variables from %s onward. These will be filled "
1636 "with the system-missing value or blanks, as appropriate."
1639 #: src/data-list.c:1311
1641 "REPEATING DATA must use the same file as its corresponding DATA LIST or FILE "
1645 #: src/data-list.c:1321
1646 msgid "STARTS subcommand given multiple times."
1649 #: src/data-list.c:1345
1651 msgid "STARTS beginning column (%d) exceeds STARTS ending column (%d)."
1654 #: src/data-list.c:1356
1655 msgid "OCCURS subcommand given multiple times."
1658 #: src/data-list.c:1369
1659 msgid "LENGTH subcommand given multiple times."
1662 #: src/data-list.c:1382
1663 msgid "CONTINUED subcommand given multiple times."
1666 #: src/data-list.c:1401
1668 msgid "CONTINUED beginning column (%d) exceeds CONTINUED ending column (%d)."
1671 #: src/data-list.c:1415
1672 msgid "ID subcommand given multiple times."
1675 #: src/data-list.c:1424
1677 msgid "ID beginning column (%ld) must be positive."
1680 #: src/data-list.c:1439
1682 msgid "ID ending column (%ld) must be positive."
1685 #: src/data-list.c:1445
1687 msgid "ID ending column (%ld) cannot be less than ID beginning column (%d)."
1690 #: src/data-list.c:1484
1691 msgid "Missing required specification STARTS."
1694 #: src/data-list.c:1486
1695 msgid "Missing required specification OCCURS."
1698 #: src/data-list.c:1493
1699 msgid "ID specified without CONTINUED."
1702 #: src/data-list.c:1581
1703 msgid "String variable not allowed here."
1706 #: src/data-list.c:1591
1708 msgid "%s (%d) must be at least 1."
1711 #: src/data-list.c:1597
1713 msgid "Variable or integer expected for %s."
1716 #: src/data-list.c:1736
1718 msgid "Mismatched case ID (%s). Expected value was %s."
1721 #: src/data-list.c:1768
1724 "Variable %s starting in column %d extends beyond physical record length of %"
1728 #: src/data-list.c:1836
1730 msgid "Invalid value %d for OCCURS."
1733 #: src/data-list.c:1842
1735 msgid "Beginning column for STARTS (%d) must be at least 1."
1738 #: src/data-list.c:1850
1740 msgid "Ending column for STARTS (%d) is less than beginning column (%d)."
1743 #: src/data-list.c:1858
1745 msgid "Invalid value %d for LENGTH."
1748 #: src/data-list.c:1865
1750 msgid "Beginning column for CONTINUED (%d) must be at least 1."
1753 #: src/data-list.c:1873
1755 msgid "Ending column for CONTINUED (%d) is less than beginning column (%d)."
1758 #: src/data-list.c:1896
1761 "Number of repetitions specified on OCCURS (%d) exceed number of repetitions "
1762 "available in space on STARTS (%d), and CONTINUED not specified."
1765 #: src/data-list.c:1913
1767 msgid "Unexpected end of file with %d repetitions remaining out of %d."
1770 #: src/data-out.c:143 src/sfm-read.c:470 src/sysfile-info.c:116
1774 #: src/data-out.c:251
1776 "The N output format cannot be used to output a negative number or the system-"
1780 #: src/data-out.c:362
1783 "Quality of zoned decimal (Z) output format code is suspect. Check your "
1784 "results. Report bugs to %s."
1787 #: src/data-out.c:369
1788 msgid "The system-missing value cannot be output as a zoned decimal number."
1791 #: src/data-out.c:382
1793 msgid "Number %g too big to fit in field with format Z%d.%d."
1796 #: src/data-out.c:774
1798 msgid "Time value %g too large in magnitude to convert to alphanumeric time."
1801 #: src/data-out.c:827
1803 msgid "Weekday index %d does not lie between 1 and 7."
1806 #: src/data-out.c:848
1808 msgid "Month index %d does not lie between 1 and 12."
1811 #: src/data-out.c:960
1814 "Year %d cannot be represented in four digits for output formatting purposes."
1819 msgid "%s: Closing data-file handle %s."
1823 msgid "<<Bug in dfm.c>>"
1828 msgid "%s: Opening data-file handle %s for reading."
1831 #: src/dfm.c:135 src/dfm.c:152
1832 msgid "BEGIN DATA expected."
1837 msgid "An error occurred while opening \"%s\" for reading as a data file: %s."
1842 msgid "%s: Opening data-file handle %s for writing."
1846 msgid "Cannot open the inline file for writing."
1851 msgid "An error occurred while opening \"%s\" for writing as a data file: %s."
1856 "Unexpected end-of-file while reading data in BEGIN DATA. This probably "
1857 "indicates a missing or misformatted END DATA command. END DATA must appear "
1858 "by itself on a single line with exactly one space between words."
1861 #: src/dfm.c:400 src/dfm.c:421
1863 msgid "Error reading file %s: %s."
1868 msgid "%s: Partial record at end of file."
1873 msgid "Cannot read from file %s already opened for %s."
1878 msgid "Attempt to read beyond end-of-file on file %s."
1883 msgid "Cannot write to file %s already opened for %s."
1888 msgid "Error writing file %s: %s."
1893 "This command is not valid here since the current input program does not "
1894 "access the inline file."
1898 msgid "inline file: Opening for reading."
1902 msgid "Skipping remaining inline data."
1906 msgid "reading as a data file"
1910 msgid "writing as a data file"
1914 msgid "There is no DO IF to match with this ELSE IF."
1918 msgid "The ELSE command must follow all ELSE IF commands in a DO IF structure."
1922 msgid "End of command expected."
1926 msgid "There is no DO IF to match with this ELSE."
1931 "There may be at most one ELSE clause in each DO IF structure. It must be "
1936 msgid "There is no DO IF to match with this END IF."
1941 msgid "DO IF %d: true\n"
1946 msgid "DO IF %d: false\n"
1951 msgid "DO IF %d: missing\n"
1955 msgid "Terminating NOW due to a fatal error!"
1959 msgid "Terminating execution of syntax file due to error."
1964 msgid "Errors (%d) exceeds limit (%d)."
1969 msgid "Warnings (%d) exceed limit (%d)."
1976 #: src/error.c:255 src/error.c:262 src/error.c:265 src/expr-prs.c:1463
1980 #: src/error.c:256 src/error.c:263 src/error.c:266
1984 #: src/error.c:257 src/error.c:267
1988 #: src/error.c:259 src/error.c:260
1989 msgid "installation error"
1992 #: src/expr-evl.c:1164
1994 "A number being treated as a Boolean in an expression was found to have a "
1995 "value other than 0 (false), 1 (true), or the system-missing value. The "
1996 "result was forced to 0."
1999 #: src/expr-evl.c:1208
2002 "SYSMIS is not a valid index value for vector %s. The result will be set to "
2006 #: src/expr-evl.c:1212
2009 "%g is not a valid index value for vector %s. The result will be set to "
2013 #: src/expr-evl.c:1230
2016 "SYSMIS is not a valid index value for vector %s. The result will be set to "
2020 #: src/expr-evl.c:1235
2023 "%g is not a valid index value for vector %s. The result will be set to the "
2027 #: src/expr-evl.c:1340
2029 msgid "evaluate_expression(): not implemented: %s\n"
2032 #: src/expr-evl.c:1343
2034 msgid "evaluate_expression(): not implemented: %d\n"
2037 #: src/expr-opt.c:662
2039 "While optimizing a constant expression, there was a bad value for the third "
2040 "argument to INDEX."
2043 #: src/expr-opt.c:687
2045 "While optimizing a constant expression, there was a bad value for the third "
2046 "argument to RINDEX."
2049 #: src/expr-opt.c:746
2051 msgid "Third argument to %cPAD() must be at least one character in length."
2054 #: src/expr-opt.c:779
2056 msgid "Second argument to %cTRIM() must be at least one character in length."
2059 #: src/expr-opt.c:880
2061 "When optimizing a constant expression, an integer that was being used as an "
2062 "Boolean value was found to have a constant value other than 0, 1, or SYSMIS."
2065 #: src/expr-prs.c:140
2067 "A string expression was supplied in a place where a Boolean expression was "
2071 #: src/expr-prs.c:151
2073 "A numeric expression was expected in a place where one was not supplied."
2076 #: src/expr-prs.c:159
2077 msgid "A string expression was expected in a place where one was not supplied."
2080 #: src/expr-prs.c:173
2081 msgid "The OR operator cannot take string operands."
2084 #: src/expr-prs.c:221
2085 msgid "The AND operator cannot take string operands."
2088 #: src/expr-prs.c:270
2089 msgid "The NOT operator cannot take a string operand."
2092 #: src/expr-prs.c:297
2094 "Strings cannot be compared with numeric or Boolean values with the "
2095 "relational operators = >= > <= < <>."
2098 #: src/expr-prs.c:354
2099 msgid "The `+' and `-' operators may only be used with numeric operands."
2102 #: src/expr-prs.c:406
2103 msgid "The `*' and `/' operators may only be used with numeric operands."
2106 #: src/expr-prs.c:457
2107 msgid "The unary minus (-) operator can only take a numeric operand."
2110 #: src/expr-prs.c:487
2111 msgid "Both operands to the ** operator must be numeric."
2114 #: src/expr-prs.c:581
2115 msgid "Use of $LENGTH is obsolete, returning default of 66."
2118 #: src/expr-prs.c:586
2119 msgid "Use of $WIDTH is obsolete, returning default of 131."
2122 #: src/expr-prs.c:591
2124 msgid "Unknown system variable %s."
2127 #: src/expr-prs.c:630
2128 msgid "expecting variable name"
2131 #: src/expr-prs.c:672
2132 msgid "in expression"
2135 #: src/expr-prs.c:853
2136 msgid "Argument 2 to LAG must be a small positive integer constant."
2139 #: src/expr-prs.c:926 src/expr-prs.c:965
2142 "Type mismatch in argument %d of %s, which was expected to be of %s type. It "
2143 "was actually of %s type. "
2146 #: src/expr-prs.c:952
2148 msgid "%s cannot take Boolean operands."
2151 #: src/expr-prs.c:984
2152 msgid "in function call"
2155 #: src/expr-prs.c:998
2156 msgid "RANGE requires an odd number of arguments, but at least three."
2159 #: src/expr-prs.c:1008
2161 msgid "%s requires at least two arguments."
2164 #: src/expr-prs.c:1023
2166 msgid "%s.%d requires at least %d arguments."
2169 #: src/expr-prs.c:1065
2172 "Argument %d to CONCAT is type %s. All arguments to CONCAT must be strings."
2175 #: src/expr-prs.c:1124
2178 "Argument %d to %s was expected to be of %s type. It was actually of type %s."
2181 #: src/expr-prs.c:1143
2183 msgid "%s is not a numeric format."
2186 #: src/expr-prs.c:1169
2188 msgid "Too few arguments to function %s."
2191 #: src/expr-prs.c:1201
2194 "Type mismatch in argument %d of %s, which was expected to be numeric. It "
2195 "was actually type %s."
2198 #: src/expr-prs.c:1210
2200 msgid "Missing comma following argument %d of %s."
2203 #: src/expr-prs.c:1248
2204 msgid "The index value after a vector name must be numeric."
2207 #: src/expr-prs.c:1255
2208 msgid "`)' expected after a vector index value."
2211 #: src/expr-prs.c:1288
2213 msgid "There is no function named %s."
2216 #: src/expr-prs.c:1293
2218 msgid "Function %s may not be given a minimum number of arguments."
2221 #: src/expr-prs.c:1302
2223 msgid "expecting `)' after %s function"
2226 #: src/expr-prs.c:1466
2230 #: src/expr-prs.c:1695
2231 msgid "!!TERMINAL!!"
2234 #: src/expr-prs.c:1721
2235 msgid "!!SENTINEL!!"
2238 #: src/expr-prs.c:1724
2243 #: src/expr-prs.c:1742
2247 #: src/file-type.c:126
2248 msgid "MIXED, GROUPED, or NESTED expected."
2251 #: src/file-type.c:149
2252 msgid "The CASE subcommand is not valid on FILE TYPE MIXED."
2255 #: src/file-type.c:167
2256 msgid "WARN or NOWARN expected after WILD."
2259 #: src/file-type.c:175
2260 msgid "The DUPLICATE subcommand is not valid on FILE TYPE MIXED."
2263 #: src/file-type.c:189
2264 msgid "DUPLICATE=CASE is only valid on FILE TYPE NESTED."
2267 #: src/file-type.c:198
2269 msgid "WARN%s expected after DUPLICATE."
2272 #: src/file-type.c:199
2273 msgid ", NOWARN, or CASE"
2276 #: src/file-type.c:200
2280 #: src/file-type.c:208
2281 msgid "The MISSING subcommand is not valid on FILE TYPE MIXED."
2284 #: src/file-type.c:220
2285 msgid "WARN or NOWARN after MISSING."
2288 #: src/file-type.c:228
2289 msgid "ORDERED is only valid on FILE TYPE GROUPED."
2292 #: src/file-type.c:239
2293 msgid "YES or NO expected after ORDERED."
2296 #: src/file-type.c:245 src/file-type.c:548 src/get.c:343
2297 msgid "while expecting a valid subcommand"
2300 #: src/file-type.c:252
2301 msgid "The required RECORD subcommand was not present."
2304 #: src/file-type.c:260
2305 msgid "The required CASE subcommand was not present."
2308 #: src/file-type.c:266
2309 msgid "CASE and RECORD must specify different variable names."
2312 #: src/file-type.c:315
2313 msgid "Column value must be positive."
2316 #: src/file-type.c:330
2317 msgid "Ending column precedes beginning column."
2320 #: src/file-type.c:349
2321 msgid "Bad format specifier name."
2324 #: src/file-type.c:410 src/file-type.c:569
2326 "This command may only appear within a FILE TYPE/END FILE TYPE structure."
2329 #: src/file-type.c:417
2330 msgid "OTHER may appear only on the last RECORD TYPE command."
2333 #: src/file-type.c:427
2334 msgid "No input commands (DATA LIST, REPEATING DATA) for above RECORD TYPE."
2337 #: src/file-type.c:481
2339 "The CASE subcommand is not allowed on the RECORD TYPE command for FILE TYPE "
2343 #: src/file-type.c:491
2345 "No variable name may be specified for the CASE subcommand on RECORD TYPE."
2348 #: src/file-type.c:499
2350 "The CASE column specification on RECORD TYPE must give a format specifier "
2351 "that is the same type as that of the CASE column specification given on FILE "
2355 #: src/file-type.c:515
2356 msgid "WARN or NOWARN expected on DUPLICATE subcommand."
2359 #: src/file-type.c:529
2360 msgid "WARN or NOWARN expected on MISSING subcommand."
2363 #: src/file-type.c:542
2364 msgid "YES or NO expected on SPREAD subcommand."
2367 #: src/file-type.c:582
2368 msgid "No input commands (DATA LIST, REPEATING DATA) on above RECORD TYPE."
2371 #: src/file-type.c:589
2372 msgid "No commands between FILE TYPE and END FILE TYPE."
2375 #: src/file-type.c:654
2377 msgid "Unknown record type \"%.*s\"."
2380 #: src/file-type.c:678
2382 msgid "Unknown record type %g."
2385 #: src/filename.c:221
2387 msgid "Searching for `%s'..."
2390 #: src/filename.c:229 src/filename.c:261
2391 msgid "Search unsuccessful!"
2394 #: src/filename.c:254
2399 #: src/filename.c:669
2401 msgid "Not opening pipe file `%s' because SAFER option set."
2406 msgid "Could not create acceptable variant for variable %s."
2410 msgid "Cannot create more than 99999 variable names."
2415 msgid "Error reading FLIP source file: %s."
2419 msgid "Could not create temporary file for FLIP."
2422 #: src/flip.c:379 src/flip.c:398
2424 msgid "Error writing FLIP file: %s."
2428 msgid "Error creating FLIP source file."
2433 msgid "Error rewinding FLIP file: %s."
2438 msgid "Error reading FLIP file: %s."
2443 msgid "Error seeking FLIP source file: %s."
2448 msgid "Error writing FLIP source file: %s."
2453 msgid "Error rewind FLIP source file: %s."
2457 msgid "X and T format specifiers not allowed here."
2462 msgid "%s is not a valid data format."
2467 msgid "Format %s may not be used as an input format."
2473 "Input format %s specifies a bad width %d. Format %s requires a width "
2474 "between %d and %d."
2480 "Input format %s specifies an odd width %d, but format %s requires an even "
2481 "width between %d and %d."
2487 "Input format %s specifies a bad number of implied decimal places %d. Input "
2488 "format %s allows up to 16 implied decimal places."
2494 "Output format %s specifies a bad width %d. Format %s requires a width "
2495 "between %d and %d."
2501 "Output format %s requires minimum width %d to allow %d decimal places. Try %"
2502 "s%d.%d instead of %s."
2508 "Output format %s specifies an odd width %d, but output format %s requires an "
2509 "even width between %d and %d."
2515 "Output format %s specifies a bad number of implied decimal places %d. "
2516 "Output format %s allows a number of implied decimal places between 1 and 16."
2521 msgid "Can't display a string variable of width %d with format specifier %s."
2525 msgid "Format specifier expected."
2530 msgid "Data format %s does not specify a width."
2535 msgid "Data format %s is not valid."
2539 msgid "`(' expected after variable list"
2542 #: src/formats.c:102
2544 msgid "Format %s may not be assigned to a %s variable."
2547 #: src/formats.c:123 src/numeric.c:66 src/numeric.c:139
2548 msgid "`)' expected after output format."
2551 #: src/formats.c:153
2555 #: src/formats.c:154
2556 msgid " Name Print Write\n"
2560 msgid "GET translation table from file to memory:\n"
2563 #: src/get.c:115 src/get.c:1398
2565 msgid " %8s from %3d,%3d to %3d,%3d\n"
2569 msgid "All variables deleted from system file dictionary."
2575 "Cannot rename %s as %s because there already exists a variable named %s. To "
2576 "rename variables with overlapping names, use a single RENAME subcommand such "
2577 "as \"/RENAME (A=B)(B=C)(C=A)\", or equivalently, \"/RENAME (A B C=B C A)\"."
2581 msgid "`=' expected after variable list."
2587 "Number of variables on left side of `=' (%d) does not match number of "
2588 "variables on right side (%d), in parenthesized group %d of RENAME subcommand."
2593 msgid "Requested renaming duplicates variable name %s."
2599 "Variables in dictionary:\n"
2603 msgid "The BY subcommand may be given once at most."
2607 msgid "The active file may not be specified more than once."
2611 msgid "Cannot specify the active file since no active file has been defined."
2616 "IN, FIRST, and LAST subcommands may not occur before the first FILE or TABLE."
2621 msgid "Multiple %s subcommands for a single FILE or TABLE."
2626 msgid "Duplicate variable name %s while creating %s variable."
2631 "RENAME, KEEP, and DROP subcommands may not occur before the first FILE or "
2636 msgid "The BY subcommand is required when a TABLE subcommand is given."
2641 msgid "File %s lacks BY variable %s."
2647 "Variable %s in file %s (%s) has different type or width from the same "
2648 "variable in earlier file (%s)."
2652 msgid "expecting COMM or TAPE"
2656 msgid "IMPORT translation table from file to memory:\n"
2659 #: src/getline.c:161
2661 msgid "Can't find `%s' in include file search path."
2664 #: src/getline.c:316
2666 msgid "%s: Opening as syntax file."
2669 #: src/getline.c:321
2671 msgid "Opening `%s': %s."
2674 #: src/getline.c:330 src/html.c:330 src/postscript.c:1463
2676 msgid "Reading `%s': %s."
2679 #: src/getline.c:388
2681 msgid "Closing `%s': %s."
2689 msgid "Specify a terminal type with `setenv TERM <yourtype>'."
2693 msgid "Could not access the termcap data base."
2698 msgid "Terminal type `%s' is not defined."
2702 msgid "Assuming screen of size 79x25."
2705 #: src/groff-font.c:107
2707 msgid "%s: Opening Groff font file..."
2710 #: src/groff-font.c:161
2711 msgid "Missing font name."
2714 #: src/groff-font.c:171
2715 msgid "Missing encoding filename."
2718 #: src/groff-font.c:184
2719 msgid "Bad spacewidth value."
2722 #: src/groff-font.c:196
2723 msgid "Bad slant value."
2726 #: src/groff-font.c:221
2728 msgid "Unknown ligature `%s'."
2731 #: src/groff-font.c:256
2732 msgid "Unexpected end of line reading character set."
2735 #: src/groff-font.c:264
2736 msgid "Can't use ditto mark for first character."
2739 #: src/groff-font.c:269
2740 msgid "Can't ditto into an unnamed character."
2743 #: src/groff-font.c:286
2745 msgid "Missing metrics for character `%s'."
2748 #: src/groff-font.c:295
2750 msgid "Missing type for character `%s'."
2753 #: src/groff-font.c:304
2755 msgid "Missing code for character `%s'."
2758 #: src/groff-font.c:323
2759 msgid "Malformed kernpair."
2762 #: src/groff-font.c:330
2763 msgid "Unexpected end of line reading kernpairs."
2766 #: src/groff-font.c:336
2767 msgid "Bad kern value."
2770 #: src/groff-font.c:368
2772 msgid "Font read successfully with internal name %s."
2775 #: src/groff-font.c:389
2776 msgid "Error reading font."
2779 #: src/groff-font.c:400
2780 msgid "installation error: Groff font error: "
2783 #: src/groff-font.c:425
2785 msgid "Bad character \\%3o."
2788 #: src/groff-font.c:665
2790 msgid "Groff font error: Cannot find \"%s\"."
2793 #: src/groff-font.c:730
2795 msgid "%s: Opening Groff description file..."
2798 #: src/groff-font.c:746
2799 msgid "Multiple `sizes' declarations."
2802 #: src/groff-font.c:763
2803 msgid "Unexpected end of file. Missing 0 terminator to `sizes' command?"
2806 #: src/groff-font.c:775 src/groff-font.c:782 src/groff-font.c:795
2807 msgid "Bad argument to `sizes'."
2810 #: src/groff-font.c:787
2811 msgid "Bad range in argument to `sizes'."
2814 #: src/groff-font.c:816
2815 msgid "Family name expected."
2818 #: src/groff-font.c:821
2819 msgid "This command already specified."
2822 #: src/groff-font.c:841
2824 msgid "%s: Device characteristic already defined."
2827 #: src/groff-font.c:847
2829 msgid "%s: Invalid numeric format."
2832 #: src/groff-font.c:877
2833 msgid "Missing `res', `unitwidth', and/or `sizes' line(s)."
2836 #: src/groff-font.c:903
2837 msgid "Description file read successfully."
2840 #: src/groff-font.c:935
2841 msgid "Error reading description file."
2844 #: src/groff-font.c:992
2845 msgid "<<fallback>>"
2854 msgid "bad ordering of keys %d and %d\n"
2858 msgid "Heap contents:\n"
2863 msgid "HTML driver initializing as `%s'..."
2868 msgid "Unknown configuration parameter `%s' for HTML device driver."
2873 "Cannot find HTML prologue. The use of `-vv' on the command line is "
2874 "suggested as a debugging aid."
2879 msgid "%s: %s: Opening HTML prologue..."
2882 #: src/html.c:268 src/html.c:279 src/postscript.c:1355 src/postscript.c:1366
2886 #: src/html.c:275 src/html.c:280 src/postscript.c:1362 src/postscript.c:1367
2892 msgid "%s: HTML prologue read successfully."
2897 msgid "%s: Error reading HTML prologue."
2902 msgid "HTML output driver: %s: %s"
2906 msgid "Unrecognized filename format."
2909 #: src/inpt-pgm.c:83
2910 msgid "No matching INPUT PROGRAM command."
2913 #: src/inpt-pgm.c:88
2915 "No data-input or transformation commands specified between INPUT PROGRAM and "
2916 "END INPUT PROGRAM."
2919 #: src/inpt-pgm.c:265 src/inpt-pgm.c:408
2921 "This command may only be executed between INPUT PROGRAM and END INPUT "
2925 #: src/inpt-pgm.c:324
2926 msgid "COLUMN subcommand multiply specified."
2929 #: src/inpt-pgm.c:338
2930 msgid "expecting file handle name"
2933 #: src/inpt-pgm.c:381
2935 "REREAD: Column numbers must be positive finite numbers. Column set to 1."
2940 msgid "%s does not form a valid number."
2945 msgid "Bad character in input: `%c'."
2950 msgid "Bad character in input: `\\%o'."
2954 msgid "Syntax error at end of file."
2959 msgid "Syntax error %s at `%s'."
2964 msgid "Syntax error at `%s'."
2969 msgid "expecting `%s'"
2974 msgid "expecting %s"
2978 msgid "expecting string"
2982 msgid "expecting integer"
2986 msgid "expecting number"
2990 msgid "expecting identifier"
2994 msgid "The rest of this command has been discarded."
2997 #: src/lexer.c:822 src/print.c:1174
3001 #: src/lexer.c:948 src/pfm-read.c:132 src/repeat.c:226
3002 msgid "Unexpected end of file."
3019 msgid "String of %s digits has %d characters, which is not a multiple of %d."
3024 msgid "`%c' is not a valid %s digit."
3028 msgid "Unterminated string constant."
3033 msgid "String exceeds 255 characters in length (%d characters)."
3038 "Sorry, literal strings may not contain null characters. Replacing with "
3043 msgid "The index variable may not be a string variable."
3047 msgid "There is no LOOP command that corresponds to this END LOOP."
3052 "This command may only appear enclosed in a LOOP/END LOOP control structure."
3056 msgid "BREAK not enclosed in DO IF structure."
3061 msgid "%s without %s."
3065 msgid "Error initializing output drivers."
3069 msgid "This command not executed."
3074 "Skipping the rest of this command. Part of this command may have been "
3080 "Skipping the rest of this command. This command was fully executed up to "
3086 "Trailing garbage was encountered following this command. The command was "
3087 "fully executed to this point."
3090 #: src/matrix-data.c:186
3091 msgid "VARIABLES subcommand multiply specified."
3094 #: src/matrix-data.c:201
3095 msgid "VARNAME_ cannot be explicitly specified on VARIABLES."
3098 #: src/matrix-data.c:267
3099 msgid "in FORMAT subcommand"
3102 #: src/matrix-data.c:278
3103 msgid "SPLIT subcommand multiply specified."
3106 #: src/matrix-data.c:285
3107 msgid "in SPLIT subcommand"
3110 #: src/matrix-data.c:294
3111 msgid "Split variable may not be named ROWTYPE_ or VARNAME_."
3114 #: src/matrix-data.c:327
3116 msgid "Split variable %s is already another type."
3119 #: src/matrix-data.c:342
3120 msgid "FACTORS subcommand multiply specified."
3123 #: src/matrix-data.c:357
3125 msgid "Factor variable %s is already another type."
3128 #: src/matrix-data.c:372
3129 msgid "CELLS subcommand multiply specified."
3132 #: src/matrix-data.c:378 src/matrix-data.c:397
3133 msgid "expecting positive integer"
3136 #: src/matrix-data.c:391
3137 msgid "N subcommand multiply specified."
3140 #: src/matrix-data.c:412
3141 msgid "CONTENTS subcommand multiply specified."
3144 #: src/matrix-data.c:432
3145 msgid "Nested parentheses not allowed."
3148 #: src/matrix-data.c:442
3149 msgid "Mismatched right parenthesis (`(')."
3152 #: src/matrix-data.c:447
3153 msgid "Empty parentheses not allowed."
3156 #: src/matrix-data.c:460 src/matrix-data.c:468
3157 msgid "in CONTENTS subcommand"
3160 #: src/matrix-data.c:475
3162 msgid "Content multiply specified for %s."
3165 #: src/matrix-data.c:492
3166 msgid "Missing right parenthesis."
3169 #: src/matrix-data.c:512
3170 msgid "Missing VARIABLES subcommand."
3173 #: src/matrix-data.c:518
3175 "CONTENTS subcommand not specified: assuming file contains only CORR matrix."
3178 #: src/matrix-data.c:528
3180 "Missing CELLS subcommand. CELLS is required when ROWTYPE_ is not given in "
3181 "the data and factors are present."
3184 #: src/matrix-data.c:536
3185 msgid "Split file values must be present in the data when ROWTYPE_ is present."
3188 #: src/matrix-data.c:592
3189 msgid "No continuous variables specified."
3192 #: src/matrix-data.c:1006
3194 msgid "End of line expected %s while reading %s."
3197 #: src/matrix-data.c:1193
3199 msgid "expecting value for %s %s"
3202 #: src/matrix-data.c:1344
3204 msgid "Syntax error expecting SPLIT FILE value %s."
3207 #: src/matrix-data.c:1353
3209 msgid "Expecting value %g for %s."
3212 #: src/matrix-data.c:1391 src/matrix-data.c:1820
3214 msgid "Syntax error expecting factor value %s."
3217 #: src/matrix-data.c:1400
3219 msgid "Syntax error expecting value %g for %s %s."
3222 #: src/matrix-data.c:1610
3224 msgid "Syntax error %s expecting SPLIT FILE value."
3227 #: src/matrix-data.c:1734
3230 "Expected %d lines of data for %s content; actually saw %d lines. No data "
3231 "will be output for this content."
3234 #: src/matrix-data.c:1765
3236 msgid "Multiply specified ROWTYPE_ %s."
3239 #: src/matrix-data.c:1770
3241 msgid "Syntax error %s expecting ROWTYPE_ string."
3244 #: src/matrix-data.c:1789
3246 msgid "Syntax error %s."
3249 #: src/matrix-data.c:1935
3251 msgid "Duplicate specification for %s."
3254 #: src/matrix-data.c:1947
3256 msgid "Too many rows of matrix data for %s."
3259 #: src/matrix-data.c:1992
3261 msgid "Syntax error expecting value for %s %s."
3265 msgid "`)' expected after value specification."
3268 #: src/mis-val.c:111
3270 msgid "`(' expected after variable name%s."
3273 #: src/mis-val.c:123
3274 msgid "Long string value specified."
3277 #: src/mis-val.c:128
3278 msgid "Short strings must be of equal width."
3281 #: src/mis-val.c:185
3283 msgid "Range %g THRU %g is not valid because %g is greater than %g."
3286 #: src/mis-val.c:216
3287 msgid "Number or range expected."
3290 #: src/mis-val.c:249
3291 msgid "At most one range can exist in the missing values for any one variable."
3294 #: src/mis-val.c:255
3295 msgid "At most one individual value can be missing along with one range."
3298 #: src/mis-val.c:317
3299 msgid "String is not of proper length."
3302 #: src/mis-val.c:326 src/repeat.c:484
3303 msgid "String expected."
3306 #: src/mis-val.c:366
3307 msgid "Missing value:"
3310 #: src/mis-val.c:371
3311 msgid "(long string variable)"
3314 #: src/mis-val.c:376
3315 msgid "(no missing values)\n"
3318 #: src/mis-val.c:399
3320 msgid "(!!!INTERNAL ERROR--%d!!!)\n"
3323 #: src/modify-vars.c:108
3324 msgid "REORDER subcommand may be given at most once."
3327 #: src/modify-vars.c:131
3328 msgid "Cannot specify ALL after specifying a set of variables."
3331 #: src/modify-vars.c:141
3332 msgid "`(' expected on REORDER subcommand."
3335 #: src/modify-vars.c:153
3336 msgid "`)' expected following variable names on REORDER subcommand."
3339 #: src/modify-vars.c:171
3340 msgid "RENAME subcommand may be given at most once."
3343 #: src/modify-vars.c:184
3344 msgid "`(' expected on RENAME subcommand."
3347 #: src/modify-vars.c:192
3349 "`=' expected between lists of new and old variable names on RENAME "
3353 #: src/modify-vars.c:200 src/rename-vars.c:70
3356 "Differing number of variables in old name list (%d) and in new name list (%"
3360 #: src/modify-vars.c:211
3361 msgid "`)' expected after variable lists on RENAME subcommand."
3364 #: src/modify-vars.c:225
3366 "KEEP subcommand may be given at most once. It may notbe given in "
3367 "conjunction with the DROP subcommand."
3370 #: src/modify-vars.c:267
3372 "DROP subcommand may be given at most once. It may not be given in "
3373 "conjunction with the KEEP subcommand."
3376 #: src/modify-vars.c:293
3378 msgid "Unrecognized subcommand name `%s'."
3381 #: src/modify-vars.c:295
3382 msgid "Subcommand name expected."
3385 #: src/modify-vars.c:303
3386 msgid "`/' or `.' expected."
3391 msgid "Format type %s may not be used with a numeric variable."
3394 #: src/numeric.c:78 src/numeric.c:161 src/vector.c:158
3396 msgid "There is already a variable named %s."
3399 #: src/numeric.c:132
3401 msgid "Format type %s may not be used with a string variable."
3405 msgid "Attempt to iterate driver list reentrantly."
3410 msgid "Unknown output driver `%s'."
3415 msgid "Output driver `%s' referenced but never defined."
3419 msgid "Cannot find output initialization file. Use `-vv' to view search path."
3424 msgid "%s: Opening device description file..."
3427 #: src/output.c:305 src/output.c:1165 src/postscript.c:1097
3429 msgid "Opening %s: %s."
3432 #: src/output.c:316 src/output.c:1176 src/postscript.c:1114
3434 msgid "Reading %s: %s."
3437 #: src/output.c:338 src/output.c:490
3438 msgid "Syntax error."
3441 #: src/output.c:348 src/postscript.c:1125
3443 msgid "Closing %s: %s."
3447 msgid "No output drivers are active."
3451 msgid "Device definition file read successfully."
3455 msgid "Error reading device definition file."
3465 msgid "Syntax error in string constant."
3469 msgid "Syntax error in options."
3473 msgid "Syntax error in options (`=' expected)."
3477 msgid "Syntax error in options (value expected after `=')."
3481 msgid "Driver name expected."
3485 msgid "Class name expected."
3490 msgid "Unknown output driver class `%s'."
3495 msgid "Can't initialize output driver class `%s'."
3500 msgid "Can't initialize output driver `%s' of class `%s'."
3505 msgid "Unknown device type `%s'."
3510 msgid "Can't complete initialization of output driver `%s' of class `%s'."
3515 msgid "Can't deinitialize output driver class `%s'."
3520 msgid "Trying to find keyword `%s'...\n"
3523 #: src/output.c:1026
3525 msgid "Unit \"%s\" is unknown in dimension \"%s\"."
3528 #: src/output.c:1041
3530 msgid "Bad dimension \"%s\"."
3533 #: src/output.c:1067
3535 msgid "`x' expected in paper size `%s'."
3538 #: src/output.c:1077
3540 msgid "Trailing garbage `%s' on paper size `%s'."
3543 #: src/output.c:1126
3544 msgid "Paper size name must not be empty."
3547 #: src/output.c:1157
3548 msgid "Cannot find `papersize' configuration file."
3551 #: src/output.c:1161
3553 msgid "%s: Opening paper size definition file..."
3556 #: src/output.c:1203
3557 msgid "Syntax error in paper size definition."
3560 #: src/output.c:1232
3561 msgid "Paper size definition file read successfully."
3564 #: src/output.c:1234
3565 msgid "Error reading paper size definition file."
3568 #: src/output.c:1303
3570 msgid "Error closing page on %s device of %s class."
3573 #: src/output.c:1307
3575 msgid "Error opening page on %s device of %s class."
3578 #: src/pfm-read.c:89
3580 msgid "portable file %s corrupt at offset %ld: "
3583 #: src/pfm-read.c:108 src/pfm-write.c:501
3585 msgid "%s: Closing portable file: %s."
3588 #: src/pfm-read.c:140
3589 msgid "Bad line end."
3592 #: src/pfm-read.c:221
3594 msgid "Cannot read file %s as portable file: already opened for %s."
3597 #: src/pfm-read.c:227
3599 msgid "%s: Opening portable-file handle %s for reading."
3602 #: src/pfm-read.c:235
3605 "An error occurred while opening \"%s\" for reading as a portable file: %s."
3608 #: src/pfm-read.c:269
3609 msgid "Data record expected."
3612 #: src/pfm-read.c:271
3613 msgid "Read portable-file dictionary successfully."
3616 #: src/pfm-read.c:280
3617 msgid "Error reading portable-file dictionary."
3620 #: src/pfm-read.c:378
3621 msgid "Missing numeric terminator."
3624 #: src/pfm-read.c:415
3625 msgid "Bad integer format."
3628 #: src/pfm-read.c:445
3630 msgid "Bad string length %d."
3633 #: src/pfm-read.c:544
3635 msgid "Bad date string length %d."
3638 #: src/pfm-read.c:548
3639 msgid "Bad character in date."
3642 #: src/pfm-read.c:568
3644 msgid "Bad time string length %d."
3647 #: src/pfm-read.c:572
3648 msgid "Bad character in time."
3651 #: src/pfm-read.c:622 src/pfm-read.c:631 src/sfm-read.c:900 src/sfm-read.c:910
3653 msgid "%s: Bad format specifier byte (%d)."
3656 #: src/pfm-read.c:633
3658 msgid "%s variable %s has %s format specifier %s."
3661 #: src/pfm-read.c:634 src/print.c:612 src/sfm-read.c:914
3665 #: src/pfm-read.c:634 src/print.c:612 src/sfm-read.c:914
3669 #: src/pfm-read.c:673
3670 msgid "Expected variable count record."
3673 #: src/pfm-read.c:677
3675 msgid "Invalid number of variables %d."
3678 #: src/pfm-read.c:687
3680 msgid "Unexpected flag value %d."
3683 #: src/pfm-read.c:701
3685 msgid "Weight variable name (%s) truncated."
3688 #: src/pfm-read.c:716
3689 msgid "Expected variable record."
3692 #: src/pfm-read.c:722
3694 msgid "Invalid variable width %d."
3697 #: src/pfm-read.c:740
3699 msgid "position %d: Variable name has %u characters."
3702 #: src/pfm-read.c:744
3704 msgid "position %d: Variable name begins with invalid character."
3707 #: src/pfm-read.c:748
3709 msgid "position %d: Variable name begins with lowercase letter %c."
3712 #: src/pfm-read.c:761
3714 msgid "position %d: Variable name character %d is lowercase letter %c."
3717 #: src/pfm-read.c:771
3719 msgid "position %d: character `\\%03o' is not valid in a variable name."
3722 #: src/pfm-read.c:782
3724 msgid "Duplicate variable name %s."
3727 #: src/pfm-read.c:826
3729 msgid "Bad missing values for %s."
3732 #: src/pfm-read.c:849
3734 msgid "Weighting variable %s not present in dictionary."
3737 #: src/pfm-read.c:922
3739 msgid "Unknown variable %s while parsing value labels."
3742 #: src/pfm-read.c:925
3745 "Cannot assign value labels to %s and %s, which have different variable types "
3749 #: src/pfm-read.c:958
3751 msgid "Duplicate label for value %g for variable %s."
3754 #: src/pfm-read.c:961
3756 msgid "Duplicate label for value `%.*s' for variable %s."
3759 #: src/pfm-read.c:1031
3760 msgid "End of file midway through case."
3763 #: src/pfm-read.c:1041
3764 msgid "reading as a portable file"
3767 #: src/pfm-write.c:71
3769 msgid "Cannot write file %s as portable file: already opened for %s."
3772 #: src/pfm-write.c:77
3774 msgid "%s: Opening portable-file handle %s for writing."
3777 #: src/pfm-write.c:87
3780 "An error occurred while opening \"%s\" for writing as a portable file: %s."
3783 #: src/pfm-write.c:123
3784 msgid "Wrote portable-file header successfully."
3787 #: src/pfm-write.c:128
3788 msgid "Error writing portable-file header."
3791 #: src/pfm-write.c:168
3793 msgid "%s: Writing portable file: %s."
3796 #: src/pfm-write.c:510
3797 msgid "writing as a portable file"
3800 #: src/postscript.c:323
3802 msgid "PostScript driver initializing as `%s'..."
3805 #: src/postscript.c:447
3808 "PostScript driver: The defined page is not long enough to hold margins and "
3809 "headers, plus least 15 lines of the default fonts. In fact, there's only "
3810 "room for %d lines of each font at the default size of %d.%03d points."
3813 #: src/postscript.c:577
3815 msgid "Unknown configuration parameter `%s' for PostScript device driver."
3818 #: src/postscript.c:593
3821 "Unknown orientation `%s'. Valid orientations are `portrait' and `landscape'."
3824 #: src/postscript.c:605
3826 "Unknown value for `data'. Valid values are `clean7bit', `clean8bit', and "
3830 #: src/postscript.c:614
3831 msgid "Unknown value for `line-ends'. Valid values are `lf' and `crlf'."
3834 #: src/postscript.c:623
3835 msgid "Unknown value for `line-style'. Valid values are `thick' and `double'."
3838 #: src/postscript.c:685
3841 "Default font size must be at least 1 point (value of 1000 for key `%s')."
3844 #: src/postscript.c:717
3846 msgid "Value for `%s' must be a dimension of positive length (i.e., `1in')."
3849 #: src/postscript.c:780
3851 msgid "Nonnegative integer required as value for `%s'."
3854 #: src/postscript.c:906
3856 msgid "%s: %s: Opening PostScript font encoding..."
3859 #: src/postscript.c:912
3862 "PostScript driver: Cannot open encoding file `%s': %s. Substituting "
3863 "ISOLatin1Encoding for missing encoding."
3866 #: src/postscript.c:954
3867 msgid "PostScript driver: Invalid numeric format."
3870 #: src/postscript.c:959
3873 "PostScript driver: Codes must be between 0 and 255. (%d is not allowed.)"
3876 #: src/postscript.c:995
3878 msgid "PostScript driver: Error closing encoding file `%s'."
3881 #: src/postscript.c:998
3883 msgid "%s: PostScript font encoding read successfully."
3886 #: src/postscript.c:1092
3888 msgid "%s: %s: Opening PostScript encoding list file."
3891 #: src/postscript.c:1127
3893 msgid "%s: PostScript encoding list file read successfully."
3896 #: src/postscript.c:1141
3897 msgid "<<default encoding>>"
3900 #: src/postscript.c:1299
3902 "Cannot find PostScript prologue. The use of `-vv' on the command line is "
3903 "suggested as a debugging aid."
3906 #: src/postscript.c:1304
3908 msgid "%s: %s: Opening PostScript prologue..."
3911 #: src/postscript.c:1476
3913 msgid "%s: PostScript prologue read successfully."
3916 #: src/postscript.c:1480
3918 msgid "%s: Error reading PostScript prologue."
3921 #: src/postscript.c:1650
3923 msgid "PostScript output driver: %s: %s"
3926 #: src/postscript.c:2334
3928 msgid "PostScript driver: Cannot find encoding `%s' for PostScript font `%s'."
3932 msgid "expecting a valid subcommand"
3935 #: src/print.c:370 src/print.c:387
3937 msgid "%g is not a valid column location."
3942 msgid "Column location expected following `%d-'."
3948 "%d-%ld is not a valid column range. The second column must be greater than "
3949 "or equal to the first."
3955 "%s is not of the same type as %s. To specify variables of different types "
3956 "in the same variable list, use a FORTRAN-like format specifier."
3961 "The ending column for a field must not be less than the starting column."
3966 msgid "%s variables cannot be displayed with format %s."
3971 msgid "Display format %s may not be used with a %s variable."
3976 msgid "Writing %3d records to file %s."
3981 msgid "Writing %3d records to the listing file."
3985 msgid "A file name or handle was expected in the OUTFILE subcommand."
3991 "The expression on PRINT SPACE evaluated to %d. It's not possible to PRINT "
3992 "SPACE a negative number of lines."
3998 "%d variable(s) cannot be recoded into %d variable(s). Specify the same "
3999 "number of variables as input and output variables."
4005 "There is no string variable named %s. (All string variables specified on "
4006 "INTO must already exist. Use the STRING command to create a string "
4013 "Type mismatch between input and output variables. Output variable %s is not "
4014 "a string variable, but all the input variables are string variables."
4019 msgid "Type mismatch after INTO: %s is not a numeric variable."
4024 "INTO must be used when the input values are numeric and output values are "
4030 "INTO must be used when the input values are string and output values are "
4036 "Inconsistent output types. The output values must be all numeric or all "
4041 msgid "following LO THRU"
4044 #: src/recode.c:571 src/recode.c:600
4045 msgid "in source value"
4050 "Keyword CONVERT may only be used with string input values and numeric output "
4058 #: src/recode.c:890 src/recode.c:906
4062 #: src/rename-vars.c:55
4063 msgid "`(' expected."
4066 #: src/rename-vars.c:63
4067 msgid "`=' expected between lists of new and old variable names."
4070 #: src/rename-vars.c:81
4071 msgid "`)' expected after variable names."
4074 #: src/rename-vars.c:91
4076 msgid "Renaming would duplicate variable name %s."
4081 msgid "Identifier %s is given twice."
4087 "There must be the same number of substitutions for each dummy variable "
4088 "specified. Since there were %d substitutions for %s, there must be %d for %"
4089 "s as well, but %d were specified."
4093 msgid "No commands in scope."
4097 msgid "No matching DO REPEAT."
4101 msgid "The sampling factor must be between 0 and 1 exclusive."
4106 msgid "Cannot sample %d observations from a population of %d."
4110 msgid "The filter variable must be numeric."
4114 msgid "The filter variable may not be scratch."
4118 msgid "Only last instance of this command is in effect."
4121 #: src/sfm-read.c:150
4122 msgid "corrupt system file: "
4125 #: src/sfm-read.c:166 src/sfm-write.c:740
4127 msgid "%s: Closing system file: %s."
4130 #: src/sfm-read.c:239
4132 msgid "Cannot read file %s as system file: already opened for %s."
4135 #: src/sfm-read.c:244
4137 msgid "%s: Opening system-file handle %s for reading."
4140 #: src/sfm-read.c:252
4143 "An error occurred while opening \"%s\" for reading as a system file: %s."
4146 #: src/sfm-read.c:286
4149 "%s: Weighting variable may not be a continuation of a long string variable."
4152 #: src/sfm-read.c:289
4154 msgid "%s: Weighting variable may not be a string variable."
4157 #: src/sfm-read.c:314
4160 "%s: Orphaned variable index record (type 4). Type 4 records must always "
4161 "immediately follow type 3 records."
4164 #: src/sfm-read.c:369
4166 msgid "%s: Unrecognized record type 7, subtype %d encountered in system file."
4169 #: src/sfm-read.c:393
4171 msgid "%s: Unrecognized record type %d."
4174 #: src/sfm-read.c:399
4175 msgid "Read system-file dictionary successfully."
4178 #: src/sfm-read.c:409
4179 msgid "Error reading system-file header."
4182 #: src/sfm-read.c:433
4185 "%s: Bad size (%d) or count (%d) field on record type 7, subtype 3.\tExpected "
4189 #: src/sfm-read.c:445
4192 "%s: Floating-point representation in system file is not IEEE-754. PSPP "
4193 "cannot convert between floating-point formats."
4196 #: src/sfm-read.c:460
4199 "%s: File-indicated endianness (%s) does not match endianness intuited from "
4203 #: src/sfm-read.c:462 src/sfm-read.c:463
4207 #: src/sfm-read.c:462 src/sfm-read.c:463
4208 msgid "little-endian"
4211 #: src/sfm-read.c:464
4215 #: src/sfm-read.c:468
4217 msgid "%s: File-indicated character representation code (%s) is not ASCII."
4220 #: src/sfm-read.c:470
4224 #: src/sfm-read.c:489
4227 "%s: Bad size (%d) or count (%d) field on record type 7, subtype 4.\tExpected "
4231 #: src/sfm-read.c:504
4234 "%s: File-indicated value is different from internal value for at least one "
4235 "of the three system values. SYSMIS: indicated %g, expected %g; HIGHEST: %g, "
4236 "%g; LOWEST: %g, %g."
4239 #: src/sfm-read.c:535
4242 "%s: Bad magic. Proper system files begin with the four characters `$FL2'. "
4243 "This file will not be read."
4246 #: src/sfm-read.c:578
4249 "%s: File layout code has unexpected value %d. Value should be 2, in big-"
4250 "endian or little-endian format."
4253 #: src/sfm-read.c:594
4255 msgid "%s: Number of elements per case (%d) is not between 1 and %d."
4258 #: src/sfm-read.c:601
4261 "%s: Index of weighting variable (%d) is not between 0 and number of elements "
4265 #: src/sfm-read.c:607
4267 msgid "%s: Number of cases in file (%ld) is not between -1 and %d."
4270 #: src/sfm-read.c:612
4272 msgid "%s: Compression bias (%g) is not the usual value of 100."
4275 #: src/sfm-read.c:705
4277 msgid "%s: position %d: Bad record type (%d); the expected value was 2."
4280 #: src/sfm-read.c:714
4283 "%s: position %d: String variable does not have proper number of continuation "
4287 #: src/sfm-read.c:722
4289 msgid "%s: position %d: Superfluous long string continuation record."
4292 #: src/sfm-read.c:727
4294 msgid "%s: position %d: Bad variable type code %d."
4297 #: src/sfm-read.c:730
4299 msgid "%s: position %d: Variable label indicator field is not 0 or 1."
4302 #: src/sfm-read.c:734
4305 "%s: position %d: Missing value indicator field is not -3, -2, 0, 1, 2, or 3."
4308 #: src/sfm-read.c:740
4310 msgid "%s: position %d: Variable name begins with invalid character."
4313 #: src/sfm-read.c:743
4315 msgid "%s: position %d: Variable name begins with lowercase letter %c."
4318 #: src/sfm-read.c:746
4321 "%s: position %d: Variable name begins with octothorpe (`#'). Scratch "
4322 "variables should not appear in system files."
4325 #: src/sfm-read.c:760
4327 msgid "%s: position %d: Variable name character %d is lowercase letter %c."
4330 #: src/sfm-read.c:768
4333 "%s: position %d: character `\\%03o' (%c) is not valid in a variable name."
4336 #: src/sfm-read.c:776
4338 msgid "%s: Duplicate variable name `%s' within system file."
4341 #: src/sfm-read.c:801
4343 msgid "%s: Variable %s indicates variable label of invalid length %d."
4346 #: src/sfm-read.c:817
4348 msgid "%s: Long string variable %s may not have missing values."
4351 #: src/sfm-read.c:841
4354 "%s: String variable %s may not have missing values specified as a range."
4357 #: src/sfm-read.c:878
4359 msgid "%s: Long string continuation records omitted at end of dictionary."
4362 #: src/sfm-read.c:881
4365 "%s: System file header indicates %d variable positions but %d were read from "
4369 #: src/sfm-read.c:913
4371 msgid "%s: %s variable %s has %s format specifier %s."
4374 #: src/sfm-read.c:992
4377 "%s: Variable index record (type 4) does not immediately follow value label "
4378 "record (type 3) as it should."
4381 #: src/sfm-read.c:1002
4384 "%s: Number of variables associated with a value label (%d) is not between 1 "
4385 "and the number of variables (%d)."
4388 #: src/sfm-read.c:1018
4391 "%s: Variable index associated with value label (%d) is not between 1 and the "
4392 "number of values (%d)."
4395 #: src/sfm-read.c:1025
4398 "%s: Variable index associated with value label (%d) refers to a continuation "
4399 "of a string variable, not to an actual variable."
4402 #: src/sfm-read.c:1029
4404 msgid "%s: Value labels are not allowed on long string variables (%s)."
4407 #: src/sfm-read.c:1039
4410 "%s: Variables associated with value label are not all of identical type. "
4411 "Variable %s has %s type, but variable %s has %s type."
4414 #: src/sfm-read.c:1079
4416 msgid "%s: File contains duplicate label for value %g for variable %s."
4419 #: src/sfm-read.c:1082
4421 msgid "%s: File contains duplicate label for value `%.*s' for variable %s."
4424 #: src/sfm-read.c:1119 src/sfm-read.c:1394
4426 msgid "%s: Reading system file: %s."
4429 #: src/sfm-read.c:1121 src/sfm-read.c:1303 src/sfm-read.c:1344
4431 msgid "%s: Unexpected end of file."
4434 #: src/sfm-read.c:1139
4436 msgid "%s: System file contains multiple type 6 (document) records."
4439 #: src/sfm-read.c:1144
4441 msgid "%s: Number of document lines (%ld) must be greater than 0."
4444 #: src/sfm-read.c:1168
4445 msgid "dictionary:\n"
4448 #: src/sfm-read.c:1176
4452 #: src/sfm-read.c:1177
4456 #: src/sfm-read.c:1180
4460 #: src/sfm-read.c:1180
4464 #: src/sfm-read.c:1186
4468 #: src/sfm-read.c:1190
4472 #: src/sfm-read.c:1194
4476 #: src/sfm-read.c:1198
4480 #: src/sfm-read.c:1206
4484 #: src/sfm-read.c:1210
4488 #: src/sfm-read.c:1214
4492 #: src/sfm-read.c:1218
4496 #: src/sfm-read.c:1222
4500 #: src/sfm-read.c:1256
4502 msgid "%s: Error reading file: %s."
4505 #: src/sfm-read.c:1294
4507 msgid "%s: Compressed data is corrupted. Data ends partway through a case."
4510 #: src/sfm-read.c:1396
4512 msgid "%s: Partial record at end of system file."
4515 #: src/sfm-read.c:1434
4516 msgid "reading as a system file"
4519 #: src/sfm-write.c:96
4521 msgid "Cannot write file %s as system file: already opened for %s."
4524 #: src/sfm-write.c:101
4526 msgid "%s: Opening system-file handle %s for writing."
4529 #: src/sfm-write.c:111
4532 "An error occurred while opening \"%s\" for writing as a system file: %s."
4535 #: src/sfm-write.c:164
4536 msgid "Wrote system-file header successfully."
4539 #: src/sfm-write.c:169
4540 msgid "Error writing system-file header."
4543 #: src/sfm-write.c:604
4545 msgid "%s: Writing system file: %s."
4548 #: src/sfm-write.c:750
4549 msgid "writing as a system file"
4553 msgid "`A' or `D' expected inside parentheses."
4557 msgid "`)' expected."
4562 msgid "%s: Cannot create temporary directory: %s."
4567 msgid "%s: Error removing directory for temporary files: %s."
4573 "Out of memory. Could not allocate room for minimum of %d cases of %d bytes "
4574 "each. (PSPP workspace is currently restricted to a maximum of %d KB.)"
4579 msgid "allocated %d cases == %d bytes\n"
4584 msgid "%s: Error writing temporary file: %s."
4589 msgid "SORT: Closing handle %d."
4592 #: src/sort.c:590 src/sort.c:815
4594 msgid "%s: Error closing temporary file: %s."
4597 #: src/sort.c:612 src/sort.c:628
4599 msgid "SORT: %s: Opening for writing as run %d."
4604 msgid "%s: Error opening temporary file for reading: %s."
4607 #: src/sort.c:660 src/sort.c:676
4609 msgid "%s: Error creating temporary file: %s."
4612 #: src/sort.c:819 src/sort.c:981 src/sort.c:1031 src/sort.c:1203
4615 msgid "%s: Error removing temporary file: %s."
4619 msgid "merging runs"
4624 msgid " into run %d(%d)\n"
4628 msgid "Out of memory expanding Huffman priority queue."
4633 msgid "%s: Error creating temporary file for merge: %s."
4636 #: src/sort.c:1070 src/sort.c:1130
4638 msgid "%s: Error reading temporary file in merge: %s."
4641 #: src/sort.c:1073 src/sort.c:1134
4643 msgid "%s: Unexpected end of temporary file in merge."
4648 msgid "%s: Error writing temporary file in merge: %s."
4651 #: src/sort.c:1150 src/sort.c:1183
4653 msgid "%s: Error closing temporary file in merge: %s."
4658 msgid "%s: Error removing temporary file in merge: %s."
4663 msgid "%s: Cannot open sort result file: %s."
4668 msgid "%s: Error reading sort result file: %s."
4673 msgid "%s: Unexpected end of sort result file: %s."
4678 msgid "%s: Error closing sort result file: %s."
4683 msgid "%s: Error removing sort result file: %s."
4686 #: src/sysfile-info.c:97
4690 #: src/sysfile-info.c:99
4694 #: src/sysfile-info.c:103
4698 #: src/sysfile-info.c:106
4702 #: src/sysfile-info.c:109
4706 #: src/sysfile-info.c:110
4710 #: src/sysfile-info.c:110
4714 #: src/sysfile-info.c:111
4718 #: src/sysfile-info.c:114
4722 #: src/sysfile-info.c:117
4726 #: src/sysfile-info.c:118
4727 msgid "System File."
4730 #: src/sysfile-info.c:119
4734 #: src/sysfile-info.c:123
4735 msgid "Not weighted."
4738 #: src/sysfile-info.c:125
4742 #: src/sysfile-info.c:127
4744 msgid "Compression %s."
4747 #: src/sysfile-info.c:127
4751 #: src/sysfile-info.c:127
4755 #: src/sysfile-info.c:136 src/sysfile-info.c:377
4759 #: src/sysfile-info.c:137 src/sysfile-info.c:374
4763 #: src/sysfile-info.c:196
4764 msgid "The active file does not have a file label."
4767 #: src/sysfile-info.c:199
4771 #: src/sysfile-info.c:261
4772 msgid "No variables to display."
4775 #: src/sysfile-info.c:280
4776 msgid "Macros not supported."
4779 #: src/sysfile-info.c:290
4780 msgid "The active file dictionary does not contain any documents."
4783 #: src/sysfile-info.c:299
4784 msgid "Documents in the active file:"
4787 #: src/sysfile-info.c:379 src/sysfile-info.c:537 src/vfm.c:1095
4791 #: src/sysfile-info.c:451
4796 #: src/sysfile-info.c:458
4798 msgid "Print Format: %s"
4801 #: src/sysfile-info.c:461
4803 msgid "Write Format: %s"
4806 #: src/sysfile-info.c:469
4807 msgid "Missing Values: "
4810 #: src/sysfile-info.c:593
4811 msgid "No vectors defined."
4814 #: src/sysfile-info.c:608
4820 msgid "bad vline: x=%d+%d=%d y=(%d+%d=%d,%d+%d=%d) in table size (%d,%d)\n"
4825 msgid "bad hline: x=(%d+%d=%d,%d+%d=%d) y=%d+%d=%d in table size (%d,%d)\n"
4831 "bad box: (%d+%d=%d,%d+%d=%d)-(%d+%d=%d,%d+%d=%d) in table size (%d,%d)\n"
4834 #: src/temporary.c:49
4835 msgid "This command is not valid inside DO IF or LOOP."
4838 #: src/temporary.c:56
4840 "This command may only appear once between procedures and procedure-like "
4846 msgid "%s before: %s\n"
4855 msgid "%s: `.' expected after string."
4860 msgid "%s after: %s\n"
4865 msgid "Document entered %s %02d:%02d:%02d by %s (%s):"
4868 #: src/val-labs.c:138
4871 "It is not possible to assign value labels to long string variables such as %"
4875 #: src/val-labs.c:176
4876 msgid "String expected for value."
4879 #: src/val-labs.c:185
4880 msgid "Number expected for value."
4883 #: src/val-labs.c:189
4885 msgid "Value label `%g' is not integer."
4888 #: src/val-labs.c:199
4889 msgid "Truncating value label to 60 characters."
4892 #: src/val-labs.c:220
4893 msgid "Value labels:"
4896 #: src/val-labs.c:237
4897 msgid " (no value labels)\n"
4900 #: src/var-labs.c:53
4901 msgid "String expected for variable label."
4904 #: src/var-labs.c:59
4905 msgid "Truncating variable label to 120 characters."
4908 #: src/var-labs.c:87
4909 msgid "Variable labels:\n"
4912 #: src/var-labs.c:94
4913 msgid "(no variable label)"
4916 #: src/vars-prs.c:46
4918 msgid "%s is not a variable name."
4921 #: src/vars-prs.c:194
4923 msgid "%s TO %s is not valid syntax since %s precedes %s in the dictionary."
4926 #: src/vars-prs.c:204
4929 "When using the TO keyword to specify several variables, both variables must "
4930 "be from the same variable dictionaries, of either ordinary, scratch, or "
4931 "system variables. %s is a %s variable, whereas %s is %s."
4934 #: src/vars-prs.c:222
4936 msgid "Scratch variables (such as %s) are not allowed here."
4939 #: src/vars-prs.c:245
4942 "%s is not a numeric variable. It will not be included in the variable list."
4945 #: src/vars-prs.c:248
4948 "%s is not a string variable. It will not be included in the variable list."
4951 #: src/vars-prs.c:252
4954 "%s and %s are not the same type. All variables in this variable list must "
4955 "be of the same type. %s will be omitted from list."
4958 #: src/vars-prs.c:257
4960 msgid "Variable %s appears twice in variable list."
4963 #: src/vars-prs.c:334
4964 msgid "incorrect use of TO convention"
4967 #: src/vars-prs.c:380
4968 msgid "Scratch variables not allowed here."
4971 #: src/vars-prs.c:402
4972 msgid "Prefixes don't match in use of TO convention."
4975 #: src/vars-prs.c:407
4976 msgid "Bad bounds in use of TO convention."
4981 msgid "Vector name %s is given twice."
4986 msgid "There is already a vector with name %s."
4991 "A slash must be used to separate each vector specification when using the "
4992 "long form. Commands such as VECTOR A,B=Q1 TO Q20 are not supported."
4996 msgid "Vectors must have at least one element."
5001 msgid "%s%d is too long for a variable name."
5006 "The syntax for this command does not match the expected syntax for either "
5007 "the long form or the short form of VECTOR."
5013 "Workspace overflow predicted. Max workspace is currently set to %d KB (%d "
5014 "cases at %d bytes each). Paging active file to disk."
5024 "An error occurred attempting to create a temporary file for use as the "
5031 "An error occurred while attempting to read from a temporary file created for "
5032 "the active file: %s."
5038 "An error occurred while attempting to write to a temporary file used as the "
5045 "An error occurred while attempting to rewind a temporary file used as the "
5050 msgid "Virtual memory exhausted. Paging active file to disk."
5056 "Workspace limit of %d KB (%d cases at %d bytes each) overflowed. Paging "
5057 "active file to disk."
5060 #: src/vfm.c:814 src/vfm.c:851
5063 "An error occurred while attempting to write to a temporary file created as "
5064 "the active file, while paging to disk: %s."
5072 msgid "The weighting variable must be numeric."
5076 msgid "The weighting variable may not be scratch."