1 Prerequisites for Building PSPP from Git
2 ----------------------------------------
4 To build this project from the sources direct from the Git archive,
5 you must install the prerequisites listed in README, plus the
8 * Autoconf 2.60 (or later).
10 * Automake 1.10 (or later).
12 * Gettext 0.17 (or later).
14 * GNU M4 1.4.9 (or later).
16 * pkg-config 0.21 (or later).
18 * gperf 3.0.1 (or later).
20 * Gnulib (see below for details).
22 * libtool 1.5.22 (or later).
24 * Texinfo 4.7 or later, to build the documentation.
26 After you install PSPP's prerequisites, you must obtain a copy of
27 Gnulib, then bootstrap the tree, as described in the sections below.
28 After that, you may follow the procedure described in INSTALL.
33 This version of PSPP should work with the Gnulib commit shown below.
34 Gnulib does not maintain a stable API or ABI, so it is possible that
35 PSPP will not work with older or newer versions of Gnulib.
37 commit 68dd9ac979d5c3afd72f3d2fb0d6dcda32b3c384
38 Author: Bruno Haible <bruno@clisp.org>
39 Date: Tue Aug 23 08:40:27 2011 +0200
41 tmpdir: Use a good default directory on native Windows.
44 To clone Gnulib into a directory named "gnulib" using Git, and then
45 check out this particular commit, run these commands:
46 git clone git://git.savannah.gnu.org/gnulib.git gnulib
49 where $COMMIT should be replaced by the commit number listed above
50 (usually it is sufficient to just type the first 6 or so digits).
52 If you do not have Git installed, then you may alternately download
53 http://git.savannah.gnu.org/gitweb/?p=gnulib.git;a=snapshot;h=$COMMIT;sf=tgz
54 where $COMMIT is, again, at least the first few digits of the commit
55 number listed above. This download will yield a tar.gz file that you
56 may extract with "gunzip" and "tar" to yield identical results.
61 Once you have Gnulib installed, PSPP must be "bootstrapped" using the
64 If you checked Gnulib out in a directory named `gnulib' at the same
65 level as PSPP, then this is sufficient. Otherwise, provide the
66 location of GNULIB on the `make' command line:
67 make -f Smake GNULIB=/gnulib/base/directory/name
69 After executing Smake, follow the procedure described in INSTALL to
70 build and install PSPP. On some systems this may be as simple as:
74 Once PSPP is built, you may run its self-tests with:
76 or for a more thorough test: